Hi Felipe,
On Wed, Feb 27, 2013 at 8:13 PM, Vivek Gautam <[email protected]> wrote:
> Based on 'usb-next'
>
> Changes from v5:
> - Squashed the following change from Felipe in this patch-set:
> [PATCH] usb: phy: samsung: let it be built as a module
> - Using EXPORT_SYMBOL_GPL() to export symbols in "samsung-usbphy.c"
> to allow module builds of these samsung PHY drivers.
>
> Vivek Gautam (2):
> usb: phy: samsung: Common out the generic stuff
> usb: phy: samsung: Add PHY support for USB 3.0 controller
>
I am rebasing this pach-set on top of your PHY driver changes in
'testing' branch of your tree.
I took first 194 patches ;) from top of testing branch (i could find
these on top of 3.9 rc2 merge),
and applied the same on 'usb-next' branch in my development tree in
order to test further.
I shall be posting these rebased patch-set, so that it will be easier
for you to merge the changes in.
Is there something you want to point out to me while i do this ?
> drivers/usb/phy/Kconfig | 25 +-
> drivers/usb/phy/Makefile | 2 +
> drivers/usb/phy/samsung-usb2phy.c | 511 ++++++++++++++++++++++++++
> drivers/usb/phy/samsung-usb3phy.c | 349 ++++++++++++++++++
> drivers/usb/phy/samsung-usbphy.c | 722 +------------------------------------
> drivers/usb/phy/samsung-usbphy.h | 328 +++++++++++++++++
> 6 files changed, 1224 insertions(+), 713 deletions(-)
> create mode 100644 drivers/usb/phy/samsung-usb2phy.c
> create mode 100644 drivers/usb/phy/samsung-usb3phy.c
> create mode 100644 drivers/usb/phy/samsung-usbphy.h
>
> --
> 1.7.6.5
>
> _______________________________________________
> devicetree-discuss mailing list
> [email protected]
> https://lists.ozlabs.org/listinfo/devicetree-discuss
--
Thanks & Regards
Vivek
On Wed, Mar 13, 2013 at 03:41:15PM +0530, Vivek Gautam wrote:
> Hi Felipe,
>
>
> On Wed, Feb 27, 2013 at 8:13 PM, Vivek Gautam <[email protected]> wrote:
> > Based on 'usb-next'
> >
> > Changes from v5:
> > - Squashed the following change from Felipe in this patch-set:
> > [PATCH] usb: phy: samsung: let it be built as a module
> > - Using EXPORT_SYMBOL_GPL() to export symbols in "samsung-usbphy.c"
> > to allow module builds of these samsung PHY drivers.
> >
> > Vivek Gautam (2):
> > usb: phy: samsung: Common out the generic stuff
> > usb: phy: samsung: Add PHY support for USB 3.0 controller
> >
>
> I am rebasing this pach-set on top of your PHY driver changes in
> 'testing' branch of your tree.
> I took first 194 patches ;) from top of testing branch (i could find
> these on top of 3.9 rc2 merge),
> and applied the same on 'usb-next' branch in my development tree in
> order to test further.
>
> I shall be posting these rebased patch-set, so that it will be easier
> for you to merge the changes in.
> Is there something you want to point out to me while i do this ?
nothing to point out as of now :-)
Thanks a lot.
--
balbi