Florian,
Any word on version 2 of this series? I'd like to base the conversion
of kirkwood to DT based ethernet init on it.
thx,
Jason.
On Tue, Jan 29, 2013 at 04:24:03PM +0100, Florian Fainelli wrote:
> Hi all,
>
> This patch converts the mv643xx_eth driver to use the mvmdio MDIO bus driver
> instead of rolling its own implementation. As a result, all users of this
> mv643xx_eth driver are converted to register an "orion-mdio" platform_device.
> The mvmdio driver is also updated to support an interrupt line which reports
> SMI error/completion, and to allow traditionnal platform device registration
> instead of just device tree.
>
> David, I think it makes sense for you to merge all of this, since we do
> not want the architecture files to be desynchronized from the mv643xx_eth to
> avoid runtime breakage. The potential for merge conflicts should be very small.
>
> You can probably safely merge patches 1 to 4 if Thomas agrees, and we will
> see what kind of feeback I get on patch 5.
>
> Florian Fainelli (5):
> net: mvmdio: unmap base register address at driver removal
> net: mvmdio: rename base register cookie from smireg to regs
> net: mvmdio: enhance driver to support SMI error/done interrupts
> net: mvmdio: allow Device Tree and platform device to coexist
> mv643xx_eth: convert to use the Marvell Orion MDIO driver
>
> .../devicetree/bindings/net/marvell-orion-mdio.txt | 3 +
> arch/arm/plat-orion/common.c | 84 +++++++--
> arch/powerpc/platforms/chrp/pegasos_eth.c | 20 +++
> arch/powerpc/sysdev/mv64x60_dev.c | 14 +-
> drivers/net/ethernet/marvell/Kconfig | 1 +
> drivers/net/ethernet/marvell/mv643xx_eth.c | 187 +-------------------
> drivers/net/ethernet/marvell/mvmdio.c | 136 +++++++++++---
> 7 files changed, 226 insertions(+), 219 deletions(-)
>
> --
> 1.7.10.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hello Jason,
Le 03/14/13 18:25, Jason Cooper a écrit :
> Florian,
>
> Any word on version 2 of this series? I'd like to base the conversion
> of kirkwood to DT based ethernet init on it.
Just sent them out for review, thanks for reminder, they were sitting in
my tree for a couple days already.
--
Florian
On Thu, Mar 14, 2013 at 07:09:18PM +0100, Florian Fainelli wrote:
> Hello Jason,
>
> Le 03/14/13 18:25, Jason Cooper a ?crit :
> >Florian,
> >
> >Any word on version 2 of this series? I'd like to base the conversion
> >of kirkwood to DT based ethernet init on it.
>
> Just sent them out for review, thanks for reminder, they were
> sitting in my tree for a couple days already.
Great! I'll give this a spin.
thx,
Jason.