From: Philippe Begnic <[email protected]>
Create U8540 clock tree definitions for common clock framework
Philippe Begnic (4):
clk: ux500: Pass clock base adresses in initcall for u8540 and u9540
mfd: db8500: Update register definition for u8540 clock
mfd: db8500: Update BML clock register for db8580
clk: ux500: Clocks definition for u8540
arch/arm/mach-ux500/cpu.c | 6 +-
drivers/clk/ux500/u8540_clk.c | 564 ++++++++++++++++++++++++++++-
drivers/clk/ux500/u9540_clk.c | 4 +-
drivers/mfd/db8500-prcmu.c | 1 +
drivers/mfd/dbx500-prcmu-regs.h | 1 +
include/linux/mfd/abx500/ab8500-sysctrl.h | 4 +-
include/linux/mfd/dbx500-prcmu.h | 12 +
include/linux/platform_data/clk-ux500.h | 6 +-
8 files changed, 587 insertions(+), 11 deletions(-)
--
1.7.9.5
From: Philippe Begnic <[email protected]>
PRCMU and ab8500 registers updated for u8540
Signed-off-by: Philippe Begnic <[email protected]>
---
include/linux/mfd/abx500/ab8500-sysctrl.h | 4 ++--
include/linux/mfd/dbx500-prcmu.h | 11 +++++++++++
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 990bc93..adba89d 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -278,8 +278,8 @@ struct ab8500_sysctrl_platform_data {
#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL0 BIT(2)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL1 BIT(3)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 689e6a0..d0ba355 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -134,6 +134,10 @@ enum prcmu_clock {
PRCMU_SIACLK,
PRCMU_SVACLK,
PRCMU_ACLK,
+ PRCMU_HVACLK, /* Ux540 only */
+ PRCMU_G1CLK, /* Ux540 only */
+ PRCMU_SDMMCHCLK,
+ PRCMU_CAMCLK,
PRCMU_NUM_REG_CLOCKS,
PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
PRCMU_CDCLK,
@@ -148,6 +152,13 @@ enum prcmu_clock {
PRCMU_DSI0ESCCLK,
PRCMU_DSI1ESCCLK,
PRCMU_DSI2ESCCLK,
+ /* LCD DSI PLL - Ux540 only */
+ PRCMU_PLLDSI_LCD,
+ PRCMU_DSI0CLK_LCD,
+ PRCMU_DSI1CLK_LCD,
+ PRCMU_DSI0ESCCLK_LCD,
+ PRCMU_DSI1ESCCLK_LCD,
+ PRCMU_DSI2ESCCLK_LCD,
};
/**
--
1.7.9.5
From: Philippe Begnic <[email protected]>
BML clock register address in DB8580 has changed.Defined a new address
under different name for DB8580.
Signed-off-by: Philippe Begnic <[email protected]>
---
drivers/mfd/db8500-prcmu.c | 1 +
drivers/mfd/dbx500-prcmu-regs.h | 1 +
include/linux/mfd/dbx500-prcmu.h | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 66f8097..a292a1d 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -480,6 +480,7 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(BML8580CLK, PLL_DIV, true),
CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index d14836e..ca355dd 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -32,6 +32,7 @@
#define PRCM_PER7CLK_MGT (0x040)
#define PRCM_LCDCLK_MGT (0x044)
#define PRCM_BMLCLK_MGT (0x04C)
+#define PRCM_BML8580CLK_MGT (0x108)
#define PRCM_HSITXCLK_MGT (0x050)
#define PRCM_HSIRXCLK_MGT (0x054)
#define PRCM_HDMICLK_MGT (0x058)
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index d0ba355..ca0790f 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -138,6 +138,7 @@ enum prcmu_clock {
PRCMU_G1CLK, /* Ux540 only */
PRCMU_SDMMCHCLK,
PRCMU_CAMCLK,
+ PRCMU_BML8580CLK,
PRCMU_NUM_REG_CLOCKS,
PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
PRCMU_CDCLK,
--
1.7.9.5
From: Philippe Begnic <[email protected]>
First clocks definition version of PRCMU and PRCC clocks for u8540 platform
Signed-off-by: Philippe Begnic <[email protected]>
---
drivers/clk/ux500/u8540_clk.c | 560 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 559 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
index 90f3c88..f262588 100644
--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -17,5 +17,563 @@
void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
u32 clkrst5_base, u32 clkrst6_base)
{
- /* register clocks here */
+ struct clk *clk;
+
+ /* Clock sources. */
+ /* Fixed ClockGen */
+ clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc0_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc1_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "ddr_pll", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "rtc32k", NULL,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+ 32768);
+ clk_register_clkdev(clk, "clk32k", NULL);
+ clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
+
+ clk = clk_register_fixed_rate(NULL, "ulp38m4", NULL,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+ 38400000);
+
+ clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "UART");
+
+ /* msp02clk needs a abx500 clk as parent. Handle by abx500 clk driver */
+ clk = clk_reg_prcmu_gate("msp02clk", "ab9540_sysclk12_b1",
+ PRCMU_MSP02CLK, 0);
+ clk_register_clkdev(clk, NULL, "MSP02");
+
+ clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP1");
+
+ clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "I2C");
+
+ clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "slim");
+
+ clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH1");
+
+ clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH2");
+
+ clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH3");
+
+ clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH5");
+
+ clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH6");
+
+ clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH7");
+
+ clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "lcd");
+ clk_register_clkdev(clk, "lcd", "mcde");
+
+ clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BML8580CLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "bml");
+
+ clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "hdmi");
+ clk_register_clkdev(clk, "hdmi", "mcde");
+
+ clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apeat");
+
+ clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apetrace");
+
+ clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mcde");
+ clk_register_clkdev(clk, "mcde", "mcde");
+ clk_register_clkdev(clk, NULL, "dsilink.0");
+ clk_register_clkdev(clk, NULL, "dsilink.1");
+ clk_register_clkdev(clk, NULL, "dsilink.2");
+
+ clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "ipi2");
+
+ clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dsialt");
+
+ clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dma40.0");
+
+ clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "b2r2");
+ clk_register_clkdev(clk, NULL, "b2r2_core");
+ clk_register_clkdev(clk, NULL, "U8500-B2R2.0");
+ clk_register_clkdev(clk, NULL, "b2r2_1_core");
+
+ clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "tv");
+ clk_register_clkdev(clk, "tv", "mcde");
+
+ clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "SSP");
+
+ clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "rngclk");
+
+ clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "uicc");
+
+ clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL,
+ PRCMU_SDMMCCLK, 100000000,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdmmc");
+
+ clk = clk_reg_prcmu_opp_volt_scalable("sdmmchclk", NULL,
+ PRCMU_SDMMCHCLK, 400000000,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdmmchclk");
+
+ clk = clk_reg_prcmu_gate("hvaclk", NULL, PRCMU_HVACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "hva");
+
+ clk = clk_reg_prcmu_gate("g1clk", NULL, PRCMU_G1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "g1");
+
+ clk = clk_reg_prcmu_scalable("spare1clk", NULL, PRCMU_SPARE1CLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilcd", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+ PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs2", "mcde");
+ clk_register_clkdev(clk, "hs_clk", "dsilink.2");
+
+ clk = clk_reg_prcmu_scalable("dsilcd_pll", "spare1clk",
+ PRCMU_PLLDSI_LCD, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilcd_pll", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+ PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs0", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi0lcdclk", "dsilcd_pll",
+ PRCMU_DSI0CLK_LCD, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs0", "mcde");
+ clk_register_clkdev(clk, "hs_clk", "dsilink.0");
+
+ clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+ PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs1", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi1lcdclk", "dsilcd_pll",
+ PRCMU_DSI1CLK_LCD, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs1", "mcde");
+ clk_register_clkdev(clk, "hs_clk", "dsilink.1");
+
+ clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+ PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "lp_clk", "dsilink.0");
+ clk_register_clkdev(clk, "dsilp0", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+ PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "lp_clk", "dsilink.1");
+ clk_register_clkdev(clk, "dsilp1", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+ PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "lp_clk", "dsilink.2");
+ clk_register_clkdev(clk, "dsilp2", "mcde");
+
+ clk = clk_reg_prcmu_scalable_rate("armss", NULL,
+ PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "armss", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "smp_twd", "armss",
+ CLK_IGNORE_UNUSED, 1, 2);
+ clk_register_clkdev(clk, NULL, "smp_twd");
+
+ /* PRCC P-clocks */
+ /* Peripheral 1 : PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base,
+ BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base,
+ BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base,
+ BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp0");
+ clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp1");
+ clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
+
+ clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base,
+ BIT(7), 0);
+ clk_register_clkdev(clk, NULL, "spi3");
+
+ clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base,
+ BIT(8), 0);
+ clk_register_clkdev(clk, "apb_pclk", "slimbus0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base,
+ BIT(9), 0);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpioblock0");
+ clk_register_clkdev(clk, "apb_pclk", "ab85xx-codec.0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
+ clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base,
+ BIT(11), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp3");
+ clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.3");
+
+ /* Peripheral 2 : PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
+
+ clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "spi2");
+
+ clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "spi1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pwl");
+
+ clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi4");
+
+ clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp2");
+ clk_register_clkdev(clk, "apb_pclk", "dbx5x0-msp-i2s.2");
+
+ clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi3");
+
+ clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "spi0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base,
+ BIT(9), 0);
+ clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
+ BIT(11), 0);
+ clk_register_clkdev(clk, NULL, "gpio.6");
+ clk_register_clkdev(clk, NULL, "gpio.7");
+ clk_register_clkdev(clk, NULL, "gpioblock1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
+ BIT(12), 0);
+ clk_register_clkdev(clk, "msp4-pclk", "ab85xx-codec.0");
+
+ /* Peripheral 3 : PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
+ BIT(0), 0);
+ clk_register_clkdev(clk, NULL, "fsmc");
+
+ clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
+ BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
+ clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base,
+ BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
+ clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base,
+ BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
+
+ clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ske");
+ clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad");
+
+ clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi5");
+
+ clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "gpio.4");
+ clk_register_clkdev(clk, NULL, "gpio.5");
+ clk_register_clkdev(clk, NULL, "gpioblock2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk9", "per3clk", clkrst3_base,
+ BIT(9), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.5");
+
+ clk = clk_reg_prcc_pclk("p3_pclk10", "per3clk", clkrst3_base,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.6");
+
+ clk = clk_reg_prcc_pclk("p3_pclk11", "per3clk", clkrst3_base,
+ BIT(11), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart3");
+
+ clk = clk_reg_prcc_pclk("p3_pclk12", "per3clk", clkrst3_base,
+ BIT(12), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart4");
+
+ /* Peripheral 5 : PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "usb", "musb-ux500.0");
+ clk_register_clkdev(clk, "usbclk", "ab-iddet.0");
+
+ clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "gpio.8");
+ clk_register_clkdev(clk, NULL, "gpioblock3");
+
+ /* Peripheral 6 : PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "rng");
+
+ clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "cryp0");
+ clk_register_clkdev(clk, NULL, "cryp1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "hash0");
+
+ clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pka");
+
+ clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base,
+ BIT(4), 0);
+ clk_register_clkdev(clk, NULL, "db8540-hash1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base,
+ BIT(5), 0);
+ clk_register_clkdev(clk, NULL, "cfgreg");
+
+ clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "mtu0");
+
+ clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "mtu1");
+
+ /*
+ * PRCC K-clocks ==> see table PRCC_PCKEN/PRCC_KCKEN
+ * This differs from the internal implementation:
+ * We don't use the PERPIH[n| clock as parent, since those _should_
+ * only be used as parents for the P-clocks.
+ * TODO: "parentjoin" with corresponding P-clocks for all K-clocks.
+ */
+
+ /* Peripheral 1 : PRCC K-clocks */
+ clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+ clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart0");
+
+ clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+ clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart1");
+
+ clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+ clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
+ clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+ clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp0");
+ clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.0");
+
+ clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+ clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp1");
+ clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.1");
+
+ clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmchclk",
+ clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi0");
+
+ clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+ clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
+ clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+ clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "slimbus0");
+
+ clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+ clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
+ clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+ clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp3");
+ clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.3");
+
+ /* Peripheral 2 : PRCC K-clocks */
+ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+ clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.3");
+
+ clk = clk_reg_prcc_kclk("p2_pwl_kclk", "rtc32k",
+ clkrst2_base, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "pwl");
+
+ clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmchclk",
+ clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi4");
+
+ clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+ clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp2");
+ clk_register_clkdev(clk, NULL, "dbx5x0-msp-i2s.2");
+
+ clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmchclk",
+ clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi1");
+
+ clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+ clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi3");
+
+ clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+ clkrst2_base, BIT(6),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+ clk_register_clkdev(clk, "hsir_hsirxclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+ clkrst2_base, BIT(7),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+ clk_register_clkdev(clk, "hsit_hsitxclk", "ste_hsi.0");
+
+ /* Should only be 9540, but might be added for 85xx as well */
+ clk = clk_reg_prcc_kclk("p2_msp4_kclk", "msp02clk",
+ clkrst2_base, BIT(9), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp4");
+ clk_register_clkdev(clk, "msp4", "ab85xx-codec.0");
+
+ /* Peripheral 3 : PRCC K-clocks */
+ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+ clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp0");
+
+ clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+ clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp1");
+
+ clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+ clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.0");
+
+ clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmchclk",
+ clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi2");
+
+ clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+ clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ske");
+ clk_register_clkdev(clk, NULL, "nmk-ske-keypad");
+
+ clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+ clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart2");
+
+ clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+ clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi5");
+
+ clk = clk_reg_prcc_kclk("p3_i2c5_kclk", "i2cclk",
+ clkrst3_base, BIT(8), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.5");
+
+ clk = clk_reg_prcc_kclk("p3_i2c6_kclk", "i2cclk",
+ clkrst3_base, BIT(9), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.6");
+
+ clk = clk_reg_prcc_kclk("p3_uart3_kclk", "uartclk",
+ clkrst3_base, BIT(10), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart3");
+
+ clk = clk_reg_prcc_kclk("p3_uart4_kclk", "uartclk",
+ clkrst3_base, BIT(11), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart4");
+
+ /* Peripheral 6 : PRCC K-clocks */
+ clk = clk_reg_prcc_kclk("p6_rng_kclk", "rngclk",
+ clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "rng");
}
--
1.7.9.5
From: Philippe Begnic <[email protected]>
Align on u8500 version, pass clock base address in clk_init functions
for u8540 and u9540.
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Philippe Begnic <[email protected]>
---
arch/arm/mach-ux500/cpu.c | 6 ++++--
drivers/clk/ux500/u8540_clk.c | 4 ++--
drivers/clk/ux500/u9540_clk.c | 4 ++--
include/linux/platform_data/clk-ux500.h | 6 ++++--
4 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b6145ea..e6fb023 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -76,13 +76,15 @@ void __init ux500_init_irq(void)
} else if (cpu_is_u9540()) {
prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
- u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+ u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
U8500_CLKRST6_BASE);
} else if (cpu_is_u8540()) {
prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
- u8540_clk_init();
+ u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+ U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+ U8500_CLKRST6_BASE);
}
}
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
index 10adfd2..90f3c88 100644
--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -12,10 +12,10 @@
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
-
#include "clk.h"
-void u8540_clk_init(void)
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+ u32 clkrst5_base, u32 clkrst6_base)
{
/* register clocks here */
}
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
index dbc0191..4479478 100644
--- a/drivers/clk/ux500/u9540_clk.c
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -12,10 +12,10 @@
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
-
#include "clk.h"
-void u9540_clk_init(void)
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+ u32 clkrst5_base, u32 clkrst6_base)
{
/* register clocks here */
}
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 320d9c3..9d98f3a 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -12,7 +12,9 @@
void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
u32 clkrst5_base, u32 clkrst6_base);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+ u32 clkrst5_base, u32 clkrst6_base);
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+ u32 clkrst5_base, u32 clkrst6_base);
#endif /* __CLK_UX500_H */
--
1.7.9.5
On 27 May 2013 14:41, Philippe Begnic <[email protected]> wrote:
> From: Philippe Begnic <[email protected]>
>
> Align on u8500 version, pass clock base address in clk_init functions
> for u8540 and u9540.
>
> Signed-off-by: Linus Walleij <[email protected]>
> Signed-off-by: Philippe Begnic <[email protected]>
> ---
> arch/arm/mach-ux500/cpu.c | 6 ++++--
> drivers/clk/ux500/u8540_clk.c | 4 ++--
> drivers/clk/ux500/u9540_clk.c | 4 ++--
> include/linux/platform_data/clk-ux500.h | 6 ++++--
> 4 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
> index b6145ea..e6fb023 100644
> --- a/arch/arm/mach-ux500/cpu.c
> +++ b/arch/arm/mach-ux500/cpu.c
> @@ -76,13 +76,15 @@ void __init ux500_init_irq(void)
> } else if (cpu_is_u9540()) {
> prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
> ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
> - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
> + u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
> U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
> U8500_CLKRST6_BASE);
> } else if (cpu_is_u8540()) {
> prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
> ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
> - u8540_clk_init();
> + u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
> + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
> + U8500_CLKRST6_BASE);
> }
> }
>
> diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
> index 10adfd2..90f3c88 100644
> --- a/drivers/clk/ux500/u8540_clk.c
> +++ b/drivers/clk/ux500/u8540_clk.c
> @@ -12,10 +12,10 @@
> #include <linux/clk-provider.h>
> #include <linux/mfd/dbx500-prcmu.h>
> #include <linux/platform_data/clk-ux500.h>
> -
> #include "clk.h"
>
> -void u8540_clk_init(void)
> +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base)
> {
> /* register clocks here */
> }
> diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
> index dbc0191..4479478 100644
> --- a/drivers/clk/ux500/u9540_clk.c
> +++ b/drivers/clk/ux500/u9540_clk.c
> @@ -12,10 +12,10 @@
> #include <linux/clk-provider.h>
> #include <linux/mfd/dbx500-prcmu.h>
> #include <linux/platform_data/clk-ux500.h>
> -
> #include "clk.h"
>
> -void u9540_clk_init(void)
> +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base)
> {
> /* register clocks here */
> }
> diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
> index 320d9c3..9d98f3a 100644
> --- a/include/linux/platform_data/clk-ux500.h
> +++ b/include/linux/platform_data/clk-ux500.h
> @@ -12,7 +12,9 @@
>
> void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> u32 clkrst5_base, u32 clkrst6_base);
> -void u9540_clk_init(void);
> -void u8540_clk_init(void);
> +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base);
> +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base);
>
> #endif /* __CLK_UX500_H */
> --
> 1.7.9.5
>
Reviewed-by: Ulf Hansson <[email protected]>
Quoting Philippe Begnic (2013-05-27 05:41:28)
> From: Philippe Begnic <[email protected]>
>
> Create U8540 clock tree definitions for common clock framework
>
The clock changes look good to me. How did you want to merge the
patches?
Regards,
Mike
> Philippe Begnic (4):
> clk: ux500: Pass clock base adresses in initcall for u8540 and u9540
> mfd: db8500: Update register definition for u8540 clock
> mfd: db8500: Update BML clock register for db8580
> clk: ux500: Clocks definition for u8540
>
> arch/arm/mach-ux500/cpu.c | 6 +-
> drivers/clk/ux500/u8540_clk.c | 564 ++++++++++++++++++++++++++++-
> drivers/clk/ux500/u9540_clk.c | 4 +-
> drivers/mfd/db8500-prcmu.c | 1 +
> drivers/mfd/dbx500-prcmu-regs.h | 1 +
> include/linux/mfd/abx500/ab8500-sysctrl.h | 4 +-
> include/linux/mfd/dbx500-prcmu.h | 12 +
> include/linux/platform_data/clk-ux500.h | 6 +-
> 8 files changed, 587 insertions(+), 11 deletions(-)
>
> --
> 1.7.9.5
On Thu, 30 May 2013, Mike Turquette wrote:
> Quoting Philippe Begnic (2013-05-27 05:41:28)
> > From: Philippe Begnic <[email protected]>
> >
> > Create U8540 clock tree definitions for common clock framework
> >
>
> The clock changes look good to me. How did you want to merge the
> patches?
You may as well take them through your tree Mike.
> > Philippe Begnic (4):
> > clk: ux500: Pass clock base adresses in initcall for u8540 and u9540
> > mfd: db8500: Update register definition for u8540 clock
> > mfd: db8500: Update BML clock register for db8580
> > clk: ux500: Clocks definition for u8540
> >
> > arch/arm/mach-ux500/cpu.c | 6 +-
> > drivers/clk/ux500/u8540_clk.c | 564 ++++++++++++++++++++++++++++-
> > drivers/clk/ux500/u9540_clk.c | 4 +-
> > drivers/mfd/db8500-prcmu.c | 1 +
> > drivers/mfd/dbx500-prcmu-regs.h | 1 +
> > include/linux/mfd/abx500/ab8500-sysctrl.h | 4 +-
> > include/linux/mfd/dbx500-prcmu.h | 12 +
> > include/linux/platform_data/clk-ux500.h | 6 +-
> > 8 files changed, 587 insertions(+), 11 deletions(-)
> >
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Fri, 31 May 2013, Mike Turquette wrote:
> Quoting Lee Jones (2013-05-30 23:55:32)
> > On Thu, 30 May 2013, Mike Turquette wrote:
> >
> > > Quoting Philippe Begnic (2013-05-27 05:41:28)
> > > > From: Philippe Begnic <[email protected]>
> > > >
> > > > Create U8540 clock tree definitions for common clock framework
> > > >
> > >
> > > The clock changes look good to me. How did you want to merge the
> > > patches?
> >
> > You may as well take them through your tree Mike.
> >
>
> Sure I can take them but it would be best to wait for an Ack from Samuel
> for the MFD parts, if only so that we are coordinated.
You don't need it. Apply with mine instead:
Acked-by: Lee Jones <[email protected]>
> > > > Philippe Begnic (4):
> > > > clk: ux500: Pass clock base adresses in initcall for u8540 and u9540
> > > > mfd: db8500: Update register definition for u8540 clock
> > > > mfd: db8500: Update BML clock register for db8580
> > > > clk: ux500: Clocks definition for u8540
> > > >
> > > > arch/arm/mach-ux500/cpu.c | 6 +-
> > > > drivers/clk/ux500/u8540_clk.c | 564 ++++++++++++++++++++++++++++-
> > > > drivers/clk/ux500/u9540_clk.c | 4 +-
> > > > drivers/mfd/db8500-prcmu.c | 1 +
> > > > drivers/mfd/dbx500-prcmu-regs.h | 1 +
> > > > include/linux/mfd/abx500/ab8500-sysctrl.h | 4 +-
> > > > include/linux/mfd/dbx500-prcmu.h | 12 +
> > > > include/linux/platform_data/clk-ux500.h | 6 +-
> > > > 8 files changed, 587 insertions(+), 11 deletions(-)
> > > >
> >
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog