2013-07-28 00:00:27

by Tony Prisk

Subject: [PATCH] dts: wandboard: Add support for SDIO bcm4329

The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch
sets the required pins to enable the wifi module.

Signed-off-by: Tony Prisk <[email protected]>
---
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 7a46f64..2fb0e9b 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -73,9 +73,14 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
- MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
>;
};
};
--
1.7.9.5

2013-07-30 06:46:37

by Shawn Guo

Subject: Re: [PATCH] dts: wandboard: Add support for SDIO bcm4329

On Sun, Jul 28, 2013 at 12:00:20PM +1200, Tony Prisk wrote:
> The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch
> sets the required pins to enable the wifi module.
>
> Signed-off-by: Tony Prisk <[email protected]>

Applied, thanks.