The FB_OLPC_DCON help section is to short according to checkpatch.pl.
We want more information about the controller type, its task, its video
pipeline position and so on.
There are no style issues, remove checkpatch.pl TODO entry.
Signed-off-by: Jens Frederich <[email protected]>
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index fe40e0b..2ff015d 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -4,9 +4,14 @@ config FB_OLPC_DCON
select I2C
select BACKLIGHT_CLASS_DEVICE
---help---
- Add support for the OLPC XO DCON controller. This controller is
- only available on OLPC platforms. Unless you have one of these
- platforms, you will want to say 'N'.
+ In order to support very low power operation, the XO laptop uses a
+ secondary Display CONtroller, or DCON. This secondary controller
+ is present in the video pipeline between the primary display
+ controller (integrate into the processor or chipset) and the LCD
+ panel. It allows the main processor/display controller to be
+ completely powered off while still retaining an image on the display.
+ This controller is only available on OLPC platforms. Unless you have
+ one of these platforms, you will want to say 'N'.
config FB_OLPC_DCON_1
bool "OLPC XO-1 DCON support"
diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO
index 35f9cda..f378e84 100644
--- a/drivers/staging/olpc_dcon/TODO
+++ b/drivers/staging/olpc_dcon/TODO
@@ -1,5 +1,4 @@
TODO:
- - checkpatch.pl cleanups
- see if vx855 gpio API can be made similar enough to cs5535 so we can
share more code
- allow simultaneous XO-1 and XO-1.5 support
--
1.7.9.5
Acked-by: Andres Salomon <[email protected]>
On Tue, 30 Jul 2013
20:11:34 +0200 Jens Frederich <[email protected]> wrote:
> The FB_OLPC_DCON help section is to short according to checkpatch.pl.
> We want more information about the controller type, its task, its
> video pipeline position and so on.
>
> There are no style issues, remove checkpatch.pl TODO entry.
>
> Signed-off-by: Jens Frederich <[email protected]>
>
> diff --git a/drivers/staging/olpc_dcon/Kconfig
> b/drivers/staging/olpc_dcon/Kconfig index fe40e0b..2ff015d 100644
> --- a/drivers/staging/olpc_dcon/Kconfig
> +++ b/drivers/staging/olpc_dcon/Kconfig
> @@ -4,9 +4,14 @@ config FB_OLPC_DCON
> select I2C
> select BACKLIGHT_CLASS_DEVICE
> ---help---
> - Add support for the OLPC XO DCON controller. This
> controller is
> - only available on OLPC platforms. Unless you have one of
> these
> - platforms, you will want to say 'N'.
> + In order to support very low power operation, the XO
> laptop uses a
> + secondary Display CONtroller, or DCON. This secondary
> controller
> + is present in the video pipeline between the primary
> display
> + controller (integrate into the processor or chipset) and
> the LCD
> + panel. It allows the main processor/display controller to
> be
> + completely powered off while still retaining an image on
> the display.
> + This controller is only available on OLPC platforms.
> Unless you have
> + one of these platforms, you will want to say 'N'.
>
> config FB_OLPC_DCON_1
> bool "OLPC XO-1 DCON support"
> diff --git a/drivers/staging/olpc_dcon/TODO
> b/drivers/staging/olpc_dcon/TODO index 35f9cda..f378e84 100644
> --- a/drivers/staging/olpc_dcon/TODO
> +++ b/drivers/staging/olpc_dcon/TODO
> @@ -1,5 +1,4 @@
> TODO:
> - - checkpatch.pl cleanups
> - see if vx855 gpio API can be made similar enough to cs5535
> so we can share more code
> - allow simultaneous XO-1 and XO-1.5 support