This change adds TILE-Gx SIMD instructions to the software raid
(md), modeling the Altivec implementation. This is only for Syndrome
generation; there is more that could be done to improve recovery,
as in the recent Intel SSE3 recovery implementation.
The code unrolls 8 times; this turns out to be the best on tilegx
hardware among the set 1, 2, 4, 8 or 16. The code reads one
cache-line of data from each disk, stores P and Q then goes to the
next cache-line.
The test code in sys/linux/lib/raid6/test reports 2008 MB/s data
read rate for syndrome generation using 18 disks (16 data and 2
parity). It was 1512 MB/s before this SIMD optimizations. This is
running on 1 core with all the data in cache.
This is based on the paper The Mathematics of RAID-6.
(http://kernel.org/pub/linux/kernel/people/hpa/raid6.pdf).
Signed-off-by: Ken Steele <[email protected]>
Signed-off-by: Chris Metcalf <[email protected]>
---
include/linux/raid/pq.h | 1 +
lib/raid6/Makefile | 6 ++++
lib/raid6/algos.c | 3 ++
lib/raid6/test/Makefile | 7 ++++
lib/raid6/tilegx.uc | 86 +++++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 103 insertions(+)
create mode 100644 lib/raid6/tilegx.uc
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index 8dfaa2c..6d5df8a 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -101,6 +101,7 @@ extern const struct raid6_calls raid6_altivec8;
extern const struct raid6_calls raid6_avx2x1;
extern const struct raid6_calls raid6_avx2x2;
extern const struct raid6_calls raid6_avx2x4;
+extern const struct raid6_calls raid6_tilegx8;
struct raid6_recov_calls {
void (*data2)(int, size_t, int, int, void **);
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 9f7c184..e5e9021 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -5,6 +5,7 @@ raid6_pq-y += algos.o recov.o tables.o int1.o int2.o int4.o \
raid6_pq-$(CONFIG_X86) += recov_ssse3.o recov_avx2.o mmx.o sse1.o sse2.o avx2.o
raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o
+raid6_pq-$(CONFIG_TILEGX) += tilegx8.o
hostprogs-y += mktables
@@ -70,6 +71,11 @@ $(obj)/altivec8.c: UNROLL := 8
$(obj)/altivec8.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
+targets += tilegx8.c
+$(obj)/tilegx8.c: UNROLL := 8
+$(obj)/tilegx8.c: $(src)/tilegx.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
quiet_cmd_mktable = TABLE $@
cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c
index 6d7316f..b9f3401 100644
--- a/lib/raid6/algos.c
+++ b/lib/raid6/algos.c
@@ -66,6 +66,9 @@ const struct raid6_calls * const raid6_algos[] = {
&raid6_altivec4,
&raid6_altivec8,
#endif
+#if defined(CONFIG_TILEGX)
+ &raid6_tilegx8,
+#endif
&raid6_intx1,
&raid6_intx2,
&raid6_intx4,
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 087332d..96b4637 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -35,6 +35,9 @@ else
OBJS += altivec1.o altivec2.o altivec4.o altivec8.o
endif
endif
+ifeq ($(ARCH),tilegx)
+OBJS += tilegx8.o
+endif
.c.o:
$(CC) $(CFLAGS) -c -o $@ $<
@@ -85,11 +88,15 @@ int16.c: int.uc ../unroll.awk
int32.c: int.uc ../unroll.awk
$(AWK) ../unroll.awk -vN=32 < int.uc > $@
+tilegx8.c: tilegx.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < tilegx.uc > $@
+
tables.c: mktables
./mktables > tables.c
clean:
rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c tables.c raid6test
+ rm tilegx*.c
spotless: clean
rm -f *~
diff --git a/lib/raid6/tilegx.uc b/lib/raid6/tilegx.uc
new file mode 100644
index 0000000..e7c2945
--- /dev/null
+++ b/lib/raid6/tilegx.uc
@@ -0,0 +1,86 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2002 H. Peter Anvin - All Rights Reserved
+ * Copyright 2012 Tilera Corporation - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * tilegx$#.c
+ *
+ * $#-way unrolled TILE-Gx SIMD for RAID-6 math.
+ *
+ * This file is postprocessed using unroll.awk.
+ *
+ */
+
+#include <linux/raid/pq.h>
+
+/* Create 8 byte copies of constant byte */
+# define NBYTES(x) (__insn_v1addi(0, x))
+# define NSIZE 8
+
+/*
+ * The SHLBYTE() operation shifts each byte left by 1, *not*
+ * rolling over into the next byte
+ */
+static inline __attribute_const__ u64 SHLBYTE(u64 v)
+{
+ /* Vector One Byte Shift Left Immediate. */
+ return __insn_v1shli(v, 1);
+}
+
+/*
+ * The MASK() operation returns 0xFF in any byte for which the high
+ * bit is 1, 0x00 for any byte for which the high bit is 0.
+ */
+static inline __attribute_const__ u64 MASK(u64 v)
+{
+ /* Vector One Byte Shift Right Signed Immediate. */
+ return __insn_v1shrsi(v, 7);
+}
+
+
+void raid6_tilegx$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u64 *p, *q;
+ int d, z, z0;
+
+ u64 wd$$, wq$$, wp$$, w1$$, w2$$;
+ u64 x1d = NBYTES(0x1d);
+ u64 * z0ptr;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = (u64 *)dptr[z0+1]; /* XOR parity */
+ q = (u64 *)dptr[z0+2]; /* RS syndrome */
+
+ z0ptr = (u64 *)&dptr[z0][0];
+ for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
+ wq$$ = wp$$ = *z0ptr++;
+ for ( z = z0-1 ; z >= 0 ; z-- ) {
+ wd$$ = *(u64 *)&dptr[z][d+$$*NSIZE];
+ wp$$ = wp$$ ^ wd$$;
+ w2$$ = MASK(wq$$);
+ w1$$ = SHLBYTE(wq$$);
+ w2$$ = w2$$ & x1d;
+ w1$$ = w1$$ ^ w2$$;
+ wq$$ = w1$$ ^ wd$$;
+ }
+ *p++ = wp$$;
+ *q++ = wq$$;
+ }
+}
+
+const struct raid6_calls raid6_tilegx$# = {
+ raid6_tilegx$#_gen_syndrome,
+ NULL,
+ "tilegx$#",
+ 0
+};
--
1.8.3.1
On Wed, 7 Aug 2013 12:39:56 -0400 Ken Steele <[email protected]> wrote:
> This change adds TILE-Gx SIMD instructions to the software raid
> (md), modeling the Altivec implementation. This is only for Syndrome
> generation; there is more that could be done to improve recovery,
> as in the recent Intel SSE3 recovery implementation.
>
> The code unrolls 8 times; this turns out to be the best on tilegx
> hardware among the set 1, 2, 4, 8 or 16. The code reads one
> cache-line of data from each disk, stores P and Q then goes to the
> next cache-line.
>
> The test code in sys/linux/lib/raid6/test reports 2008 MB/s data
> read rate for syndrome generation using 18 disks (16 data and 2
> parity). It was 1512 MB/s before this SIMD optimizations. This is
> running on 1 core with all the data in cache.
>
> This is based on the paper The Mathematics of RAID-6.
> (http://kernel.org/pub/linux/kernel/people/hpa/raid6.pdf).
>
> Signed-off-by: Ken Steele <[email protected]>
> Signed-off-by: Chris Metcalf <[email protected]>
Thanks. Looks credible and you've obviously tested it so I've added it to my
queue for the next merge window.
One tiny little change I made:
> clean:
> rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c tables.c raid6test
> + rm tilegx*.c
I made that "rm -f" for consistency.
Thanks,
NeilBrown