CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get
CPUs clk rate, has similar sort of code used for most of them.
This patchset adds a generic ->get() which will do the same thing for them. All
those drivers are required to now is to set .get to cpufreq_generic_get() and
set their clk pointer in policy->clk during ->init().
Later part of this patchset fixes 17 drivers with this change.
That's part 7 of my generic cleanups for CPUFreq core, first six are here:
1: cpufreq: Introduce cpufreq_table_validate_and_show()
https://lkml.org/lkml/2013/8/8/263
2: cpufreq: define generic routines for cpufreq drivers
https://lkml.org/lkml/2013/8/10/48
3. CPUFreq: Implement light weight ->target(): for 3.13
https://lkml.org/lkml/2013/8/13/349
4. CPUFreq: set policy->cur in cpufreq core instead of drivers
https://lkml.org/lkml/2013/8/14/288
5. CPUFreq: Move freq change notifications out of drivers
https://lkml.org/lkml/2013/8/15/506
6. cpufreq: create & use cpufreq_generic_init() routine
http://lkml.org/lkml/2013/8/21/352
All these are pushed here:
https://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/for-v3.13
Viresh Kumar (16):
cpufreq: create cpufreq_generic_get() routine
cpufreq: arm_big_little: use cpufreq_generic_get() routine
cpufreq: at32ap: use cpufreq_generic_get() routine
cpufreq: cpu0: use cpufreq_generic_get() routine
cpufreq: davinci: use cpufreq_generic_get() routine
cpufreq: dbx500: use cpufreq_generic_get() routine
cpufreq: exynos: use cpufreq_generic_get() routine
cpufreq: imx6q: use cpufreq_generic_get() routine
cpufreq: loongson2: use cpufreq_generic_get() routine
cpufreq: omap: use cpufreq_generic_get() routine
cpufreq: ppc: use cpufreq_generic_get() routine
cpufreq: s3c: use cpufreq_generic_get() routine
cpufreq: s5pv210: use cpufreq_generic_get() routine
cpufreq: spear: use cpufreq_generic_get() routine
cpufreq: tegra: use cpufreq_generic_get() routine
cpufreq: unicore2: use cpufreq_generic_get() routine
drivers/cpufreq/arm_big_little.c | 10 ++--------
drivers/cpufreq/at32ap-cpufreq.c | 17 +++++------------
drivers/cpufreq/cpufreq-cpu0.c | 8 ++------
drivers/cpufreq/cpufreq.c | 26 ++++++++++++++++++++------
drivers/cpufreq/davinci-cpufreq.c | 13 +++----------
drivers/cpufreq/dbx500-cpufreq.c | 19 ++-----------------
drivers/cpufreq/exynos-cpufreq.c | 10 +++-------
drivers/cpufreq/exynos5440-cpufreq.c | 33 ++++++++++++++-------------------
drivers/cpufreq/imx6q-cpufreq.c | 8 ++------
drivers/cpufreq/loongson2_cpufreq.c | 15 +++++----------
drivers/cpufreq/omap-cpufreq.c | 32 ++++++++++----------------------
drivers/cpufreq/ppc-corenet-cpufreq.c | 17 ++++-------------
drivers/cpufreq/s3c24xx-cpufreq.c | 10 +++-------
drivers/cpufreq/s3c64xx-cpufreq.c | 33 ++++++++++++---------------------
drivers/cpufreq/s5pv210-cpufreq.c | 21 ++++++---------------
drivers/cpufreq/spear-cpufreq.c | 8 ++------
drivers/cpufreq/tegra-cpufreq.c | 16 +++-------------
drivers/cpufreq/unicore2-cpufreq.c | 21 ++++++++-------------
include/linux/cpufreq.h | 3 +++
19 files changed, 109 insertions(+), 211 deletions(-)
--
1.7.12.rc2.18.g61b472e
CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get
CPUs clk rate, has similar sort of code used for most of them.
This patch adds a generic ->get() which will do the same thing for them. All
those drivers are required to now is to set .get to cpufreq_generic_get() and
set their clk pointer in policy->clk during ->init().
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/cpufreq.c | 26 ++++++++++++++++++++------
include/linux/cpufreq.h | 3 +++
2 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 5fc9c6b..b068f00 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -219,6 +219,20 @@ int cpufreq_generic_init(struct cpufreq_policy *policy,
}
EXPORT_SYMBOL_GPL(cpufreq_generic_init);
+unsigned int cpufreq_generic_get(unsigned int cpu)
+{
+ struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+
+ if (!policy || IS_ERR(policy->clk)) {
+ pr_err("%s: No %s associated to cpu: %d\n", __func__,
+ policy ? "clk" : "policy", cpu);
+ return 0;
+ }
+
+ return clk_get_rate(policy->clk) / 1000;
+}
+EXPORT_SYMBOL_GPL(cpufreq_generic_get);
+
struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
{
struct cpufreq_policy *policy = NULL;
@@ -1058,6 +1072,11 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
goto err_set_policy_cpu;
}
+ write_lock_irqsave(&cpufreq_driver_lock, flags);
+ for_each_cpu(j, policy->cpus)
+ per_cpu(cpufreq_cpu_data, j) = policy;
+ write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
if (cpufreq_driver->get) {
policy->cur = cpufreq_driver->get(policy->cpu);
if (!policy->cur) {
@@ -1090,11 +1109,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
}
#endif
- write_lock_irqsave(&cpufreq_driver_lock, flags);
- for_each_cpu(j, policy->cpus)
- per_cpu(cpufreq_cpu_data, j) = policy;
- write_unlock_irqrestore(&cpufreq_driver_lock, flags);
-
if (!frozen) {
ret = cpufreq_add_dev_interface(policy, dev);
if (ret)
@@ -1115,12 +1129,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
return 0;
err_out_unregister:
+err_get_freq:
write_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus)
per_cpu(cpufreq_cpu_data, j) = NULL;
write_unlock_irqrestore(&cpufreq_driver_lock, flags);
-err_get_freq:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
err_set_policy_cpu:
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 6adea26..7746d11 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -11,6 +11,7 @@
#ifndef _LINUX_CPUFREQ_H
#define _LINUX_CPUFREQ_H
+#include <linux/clk.h>
#include <linux/cpumask.h>
#include <linux/completion.h>
#include <linux/kobject.h>
@@ -66,6 +67,7 @@ struct cpufreq_policy {
unsigned int cpu; /* cpu nr of CPU managing this policy */
unsigned int last_cpu; /* cpu nr of previous CPU that managed
* this policy */
+ struct clk *clk;
struct cpufreq_cpuinfo cpuinfo;/* see above */
unsigned int min; /* in kHz */
@@ -424,6 +426,7 @@ void cpufreq_frequency_table_put_attr(unsigned int cpu);
int cpufreq_table_validate_and_show(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table);
+unsigned int cpufreq_generic_get(unsigned int cpu);
int cpufreq_generic_init(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table,
unsigned int transition_latency);
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/arm_big_little.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index e3e8f25..f48430b 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -40,13 +40,6 @@ static struct clk *clk[MAX_CLUSTERS];
static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS];
static atomic_t cluster_usage[MAX_CLUSTERS] = {ATOMIC_INIT(0), ATOMIC_INIT(0)};
-static unsigned int bL_cpufreq_get(unsigned int cpu)
-{
- u32 cur_cluster = cpu_to_cluster(cpu);
-
- return clk_get_rate(clk[cur_cluster]) / 1000;
-}
-
/* Set clock frequency */
static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
@@ -145,6 +138,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
else
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->clk = clk[cur_cluster];
cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
@@ -174,7 +168,7 @@ static struct cpufreq_driver bL_cpufreq_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = bL_cpufreq_set_target,
- .get = bL_cpufreq_get,
+ .get = cpufreq_generic_get,
.init = bL_cpufreq_init,
.exit = bL_cpufreq_exit,
.have_governor_per_policy = true,
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Hans-Christian Egtvedt <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/at32ap-cpufreq.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/cpufreq/at32ap-cpufreq.c b/drivers/cpufreq/at32ap-cpufreq.c
index 856ad80..869c0b5 100644
--- a/drivers/cpufreq/at32ap-cpufreq.c
+++ b/drivers/cpufreq/at32ap-cpufreq.c
@@ -21,17 +21,8 @@
#include <linux/export.h>
#include <linux/slab.h>
-static struct clk *cpuclk;
static struct cpufreq_frequency_table *freq_table;
-static unsigned int at32_get_speed(unsigned int cpu)
-{
- /* No SMP support */
- if (cpu)
- return 0;
- return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
-}
-
static unsigned int ref_freq;
static unsigned long loops_per_jiffy_ref;
@@ -39,7 +30,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned int old_freq, new_freq;
- old_freq = at32_get_speed(0);
+ old_freq = policy->cur;
new_freq = freq_table[index].frequency;
if (!ref_freq) {
@@ -50,7 +41,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
if (old_freq < new_freq)
boot_cpu_data.loops_per_jiffy = cpufreq_scale(
loops_per_jiffy_ref, ref_freq, new_freq);
- clk_set_rate(cpuclk, new_freq * 1000);
+ clk_set_rate(policy->clk, new_freq * 1000);
if (new_freq < old_freq)
boot_cpu_data.loops_per_jiffy = cpufreq_scale(
loops_per_jiffy_ref, ref_freq, new_freq);
@@ -61,6 +52,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
{
unsigned int frequency, rate, min_freq;
+ static struct clk *cpuclk;
int retval, steps, i;
if (policy->cpu != 0)
@@ -103,6 +95,7 @@ static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
frequency /= 2;
}
+ policy->clk = cpuclk;
freq_table[steps - 1].frequency = CPUFREQ_TABLE_END;
retval = cpufreq_table_validate_and_show(policy, freq_table);
@@ -123,7 +116,7 @@ static struct cpufreq_driver at32_driver = {
.init = at32_cpufreq_driver_init,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = at32_set_target,
- .get = at32_get_speed,
+ .get = cpufreq_generic_get,
.flags = CPUFREQ_STICKY,
};
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Shawn Guo <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/cpufreq-cpu0.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 7273bfc..62e52e3 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -29,11 +29,6 @@ static struct clk *cpu_clk;
static struct regulator *cpu_reg;
static struct cpufreq_frequency_table *freq_table;
-static unsigned int cpu0_get_speed(unsigned int cpu)
-{
- return clk_get_rate(cpu_clk) / 1000;
-}
-
static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct opp *opp;
@@ -99,6 +94,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
{
+ policy->clk = cpu_clk;
return cpufreq_generic_init(policy, freq_table, transition_latency);
}
@@ -106,7 +102,7 @@ static struct cpufreq_driver cpu0_cpufreq_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = cpu0_set_target,
- .get = cpu0_get_speed,
+ .get = cpufreq_generic_get,
.init = cpu0_cpufreq_init,
.exit = cpufreq_generic_exit,
.name = "generic_cpu0",
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Sekhar Nori <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/davinci-cpufreq.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index 7fcae0c..c07883f 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -60,14 +60,6 @@ static int davinci_verify_speed(struct cpufreq_policy *policy)
return 0;
}
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
- if (cpu)
- return 0;
-
- return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
{
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
@@ -75,7 +67,7 @@ static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
unsigned int old_freq, new_freq;
int ret = 0;
- old_freq = davinci_getspeed(0);
+ old_freq = policy->cur;
new_freq = pdata->freq_table[idx].frequency;
/* if moving to higher frequency, up the voltage beforehand */
@@ -132,6 +124,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
* to pre/post change notification list.
*/
policy->cpuinfo.transition_latency = 2000 * 1000;
+ policy->clk = cpufreq.armclk;
return 0;
}
@@ -139,7 +132,7 @@ static struct cpufreq_driver davinci_driver = {
.flags = CPUFREQ_STICKY,
.verify = davinci_verify_speed,
.target_index = davinci_target,
- .get = davinci_getspeed,
+ .get = cpufreq_generic_get,
.init = davinci_cpu_init,
.exit = cpufreq_generic_exit,
.name = "davinci",
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't have to find closest frequency in platform specific ->get() routine
wihch dbx500 driver was doing and hence it can be removed as well.
Cc: Linus Walleij <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/dbx500-cpufreq.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 0e67ab9..d83129d 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -26,24 +26,9 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
return clk_set_rate(armss_clk, freq_table[index].frequency * 1000);
}
-static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
-{
- int i = 0;
- unsigned long freq = clk_get_rate(armss_clk) / 1000;
-
- /* The value is rounded to closest frequency in the defined table. */
- while (freq_table[i + 1].frequency != CPUFREQ_TABLE_END) {
- if (freq < freq_table[i].frequency +
- (freq_table[i + 1].frequency - freq_table[i].frequency) / 2)
- return freq_table[i].frequency;
- i++;
- }
-
- return freq_table[i].frequency;
-}
-
static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
{
+ policy->clk = armss_clk;
return cpufreq_generic_init(policy, freq_table, 20 * 1000);
}
@@ -51,7 +36,7 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = dbx500_cpufreq_target,
- .get = dbx500_cpufreq_getspeed,
+ .get = cpufreq_generic_get,
.init = dbx500_cpufreq_init,
.name = "DBX500",
.attr = cpufreq_generic_attr,
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Amit Daniel Kachhap <[email protected]>
Cc: Kukjin Kim <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/exynos-cpufreq.c | 10 +++-------
drivers/cpufreq/exynos5440-cpufreq.c | 33 ++++++++++++++-------------------
2 files changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index c9ae7e6..0ef13e8 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -30,11 +30,6 @@ static unsigned int locking_frequency;
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);
-static unsigned int exynos_getspeed(unsigned int cpu)
-{
- return clk_get_rate(exynos_info->cpu_clk) / 1000;
-}
-
static int exynos_cpufreq_get_index(unsigned int freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
@@ -214,6 +209,7 @@ static struct notifier_block exynos_cpufreq_nb = {
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ policy->clk = exynos_info->cpu_clk;
return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
}
@@ -221,7 +217,7 @@ static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = exynos_target,
- .get = exynos_getspeed,
+ .get = cpufreq_generic_get,
.init = exynos_cpufreq_cpu_init,
.exit = cpufreq_generic_exit,
.name = "exynos_cpufreq",
@@ -263,7 +259,7 @@ static int __init exynos_cpufreq_init(void)
goto err_vdd_arm;
}
- locking_frequency = exynos_getspeed(0);
+ locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
register_pm_notifier(&exynos_cpufreq_nb);
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index 43e8b27..a1ad917 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -100,7 +100,6 @@ struct exynos_dvfs_data {
struct resource *mem;
int irq;
struct clk *cpu_clk;
- unsigned int cur_frequency;
unsigned int latency;
struct cpufreq_frequency_table *freq_table;
unsigned int freq_count;
@@ -165,7 +164,7 @@ static int init_div_table(void)
return 0;
}
-static void exynos_enable_dvfs(void)
+static void exynos_enable_dvfs(unsigned int cur_frequency)
{
unsigned int tmp, i, cpu;
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
@@ -184,18 +183,18 @@ static void exynos_enable_dvfs(void)
/* Set initial performance index */
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- if (freq_table[i].frequency == dvfs_info->cur_frequency)
+ if (freq_table[i].frequency == cur_frequency)
break;
if (freq_table[i].frequency == CPUFREQ_TABLE_END) {
dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
/* Assign the highest frequency */
i = 0;
- dvfs_info->cur_frequency = freq_table[i].frequency;
+ cur_frequency = freq_table[i].frequency;
}
dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
- dvfs_info->cur_frequency);
+ cur_frequency);
for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
@@ -209,11 +208,6 @@ static void exynos_enable_dvfs(void)
dvfs_info->base + XMU_DVFS_CTRL);
}
-static unsigned int exynos_getspeed(unsigned int cpu)
-{
- return dvfs_info->cur_frequency;
-}
-
static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned int tmp;
@@ -222,7 +216,7 @@ static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
mutex_lock(&cpufreq_lock);
- freqs.old = dvfs_info->cur_frequency;
+ freqs.old = policy->cur;
freqs.new = freq_table[index].frequency;
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
@@ -251,7 +245,7 @@ static void exynos_cpufreq_work(struct work_struct *work)
goto skip_work;
mutex_lock(&cpufreq_lock);
- freqs.old = dvfs_info->cur_frequency;
+ freqs.old = policy->cur;
cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);
if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)
@@ -261,10 +255,9 @@ static void exynos_cpufreq_work(struct work_struct *work)
if (likely(index < dvfs_info->freq_count)) {
freqs.new = freq_table[index].frequency;
- dvfs_info->cur_frequency = freqs.new;
} else {
dev_crit(dvfs_info->dev, "New frequency out of range\n");
- freqs.new = dvfs_info->cur_frequency;
+ freqs.new = freqs.old;
}
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
@@ -308,6 +301,7 @@ static void exynos_sort_descend_freq_table(void)
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ policy->clk = dvfs_info->cpu_clk;
return cpufreq_generic_init(policy, dvfs_info->freq_table,
dvfs_info->latency);
}
@@ -316,7 +310,7 @@ static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = exynos_target,
- .get = exynos_getspeed,
+ .get = cpufreq_generic_get,
.init = exynos_cpufreq_cpu_init,
.exit = cpufreq_generic_exit,
.name = CPUFREQ_NAME,
@@ -335,6 +329,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
int ret = -EINVAL;
struct device_node *np;
struct resource res;
+ unsigned int cur_frequency;
np = pdev->dev.of_node;
if (!np)
@@ -390,13 +385,13 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
goto err_free_table;
}
- dvfs_info->cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
- if (!dvfs_info->cur_frequency) {
+ cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
+ if (!cur_frequency) {
dev_err(dvfs_info->dev, "Failed to get clock rate\n");
ret = -EINVAL;
goto err_free_table;
}
- dvfs_info->cur_frequency /= 1000;
+ cur_frequency /= 1000;
INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);
ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,
@@ -413,7 +408,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
goto err_free_table;
}
- exynos_enable_dvfs();
+ exynos_enable_dvfs(cur_frequency);
ret = cpufreq_register_driver(&exynos_driver);
if (ret) {
dev_err(dvfs_info->dev,
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Shawn Guo <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/imx6q-cpufreq.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 5efd9b7..52bb625 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -34,11 +34,6 @@ static struct device *cpu_dev;
static struct cpufreq_frequency_table *freq_table;
static unsigned int transition_latency;
-static unsigned int imx6q_get_speed(unsigned int cpu)
-{
- return clk_get_rate(arm_clk) / 1000;
-}
-
static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct opp *opp;
@@ -150,13 +145,14 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
{
+ policy->clk = arm_clk;
return cpufreq_generic_init(policy, freq_table, transition_latency);
}
static struct cpufreq_driver imx6q_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = imx6q_set_target,
- .get = imx6q_get_speed,
+ .get = cpufreq_generic_get,
.init = imx6q_cpufreq_init,
.exit = cpufreq_generic_exit,
.name = "imx6q-cpufreq",
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a global variable to hold clock anymore.
Cc: John Crispin <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/loongson2_cpufreq.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 6232d29..58a018a 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -24,8 +24,6 @@
static uint nowait;
-static struct clk *cpuclk;
-
static void (*saved_cpu_wait) (void);
static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
@@ -44,11 +42,6 @@ static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
return 0;
}
-static unsigned int loongson2_cpufreq_get(unsigned int cpu)
-{
- return clk_get_rate(cpuclk);
-}
-
/*
* Here we notify other drivers of the proposed change and the final change.
*/
@@ -69,13 +62,14 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
set_cpus_allowed_ptr(current, &cpus_allowed);
/* setting the cpu frequency */
- clk_set_rate(cpuclk, freq);
+ clk_set_rate(policy->clk, freq);
return 0;
}
static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ static struct clk *cpuclk;
int i;
unsigned long rate;
int ret;
@@ -104,6 +98,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
return ret;
}
+ policy->clk = cpuclk;
return cpufreq_table_validate_and_show(policy,
&loongson2_clockmod_table[0]);
}
@@ -111,7 +106,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
- clk_put(cpuclk);
+ clk_put(policy->clk);
return 0;
}
@@ -120,7 +115,7 @@ static struct cpufreq_driver loongson2_cpufreq_driver = {
.init = loongson2_cpufreq_cpu_init,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = loongson2_cpufreq_target,
- .get = loongson2_cpufreq_get,
+ .get = cpufreq_generic_get,
.exit = loongson2_cpufreq_exit,
.attr = cpufreq_generic_attr,
};
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a global variable to hold clock anymore.
Cc: Santosh Shilimkar <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/omap-cpufreq.c | 32 ++++++++++----------------------
1 file changed, 10 insertions(+), 22 deletions(-)
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 97610a3..09150fc 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -36,21 +36,9 @@
static struct cpufreq_frequency_table *freq_table;
static atomic_t freq_table_users = ATOMIC_INIT(0);
-static struct clk *mpu_clk;
static struct device *mpu_dev;
static struct regulator *mpu_reg;
-static unsigned int omap_getspeed(unsigned int cpu)
-{
- unsigned long rate;
-
- if (cpu >= NR_CPUS)
- return 0;
-
- rate = clk_get_rate(mpu_clk) / 1000;
- return rate;
-}
-
static int omap_target(struct cpufreq_policy *policy, unsigned int index)
{
int r, ret;
@@ -58,11 +46,11 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
unsigned long freq, volt = 0, volt_old = 0, tol = 0;
unsigned int old_freq, new_freq;
- old_freq = omap_getspeed(policy->cpu);
+ old_freq = policy->cur;
new_freq = freq_table[index].frequency;
freq = new_freq * 1000;
- ret = clk_round_rate(mpu_clk, freq);
+ ret = clk_round_rate(policy->clk, freq);
if (IS_ERR_VALUE(ret)) {
dev_warn(mpu_dev,
"CPUfreq: Cannot find matching frequency for %lu\n",
@@ -100,7 +88,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
}
}
- ret = clk_set_rate(mpu_clk, new_freq * 1000);
+ ret = clk_set_rate(policy->clk, new_freq * 1000);
/* scaling down? scale voltage after frequency */
if (mpu_reg && (new_freq < old_freq)) {
@@ -108,7 +96,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
__func__);
- clk_set_rate(mpu_clk, old_freq * 1000);
+ clk_set_rate(policy->clk, old_freq * 1000);
return r;
}
}
@@ -126,9 +114,9 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
- mpu_clk = clk_get(NULL, "cpufreq_ck");
- if (IS_ERR(mpu_clk))
- return PTR_ERR(mpu_clk);
+ policy->clk = clk_get(NULL, "cpufreq_ck");
+ if (IS_ERR(policy->clk))
+ return PTR_ERR(policy->clk);
if (policy->cpu >= NR_CPUS) {
result = -EINVAL;
@@ -168,7 +156,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
fail_table:
freq_table_free();
fail_ck:
- clk_put(mpu_clk);
+ clk_put(policy->clk);
return result;
}
@@ -176,7 +164,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
freq_table_free();
- clk_put(mpu_clk);
+ clk_put(policy->clk);
return 0;
}
@@ -184,7 +172,7 @@ static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = omap_target,
- .get = omap_getspeed,
+ .get = cpufreq_generic_get,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a variable to hold clock anymore in struct cpu_data.
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/ppc-corenet-cpufreq.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c
index 3f7be46..051000f 100644
--- a/drivers/cpufreq/ppc-corenet-cpufreq.c
+++ b/drivers/cpufreq/ppc-corenet-cpufreq.c
@@ -24,12 +24,10 @@
/**
* struct cpu_data - per CPU data struct
- * @clk: the clk of CPU
* @parent: the parent node of cpu clock
* @table: frequency table
*/
struct cpu_data {
- struct clk *clk;
struct device_node *parent;
struct cpufreq_frequency_table *table;
};
@@ -81,13 +79,6 @@ static inline const struct cpumask *cpu_core_mask(int cpu)
}
#endif
-static unsigned int corenet_cpufreq_get_speed(unsigned int cpu)
-{
- struct cpu_data *data = per_cpu(cpu_data, cpu);
-
- return clk_get_rate(data->clk) / 1000;
-}
-
/* reduce the duplicated frequencies in frequency table */
static void freq_table_redup(struct cpufreq_frequency_table *freq_table,
int count)
@@ -158,8 +149,8 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy)
goto err_np;
}
- data->clk = of_clk_get(np, 0);
- if (IS_ERR(data->clk)) {
+ policy->clk = of_clk_get(np, 0);
+ if (IS_ERR(policy->clk)) {
pr_err("%s: no clock information\n", __func__);
goto err_nomem2;
}
@@ -255,7 +246,7 @@ static int corenet_cpufreq_target(struct cpufreq_policy *policy,
struct cpu_data *data = per_cpu(cpu_data, policy->cpu);
parent = of_clk_get(data->parent, data->table[index].driver_data);
- return clk_set_parent(data->clk, parent);
+ return clk_set_parent(policy->clk, parent);
}
static struct cpufreq_driver ppc_corenet_cpufreq_driver = {
@@ -265,7 +256,7 @@ static struct cpufreq_driver ppc_corenet_cpufreq_driver = {
.exit = __exit_p(corenet_cpufreq_cpu_exit),
.verify = cpufreq_generic_frequency_table_verify,
.target_index = corenet_cpufreq_target,
- .get = corenet_cpufreq_get_speed,
+ .get = cpufreq_generic_get,
.attr = cpufreq_generic_attr,
};
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a global variable to hold clock anymore.
Cc: Kukjin Kim <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/s3c24xx-cpufreq.c | 10 +++-------
drivers/cpufreq/s3c64xx-cpufreq.c | 33 ++++++++++++---------------------
2 files changed, 15 insertions(+), 28 deletions(-)
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 4850882..7be6c2d 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -355,11 +355,6 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy,
return -EINVAL;
}
-static unsigned int s3c_cpufreq_get(unsigned int cpu)
-{
- return clk_get_rate(clk_arm) / 1000;
-}
-
struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
{
struct clk *clk;
@@ -373,6 +368,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
static int s3c_cpufreq_init(struct cpufreq_policy *policy)
{
+ policy->clk = clk_arm;
return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency);
}
@@ -408,7 +404,7 @@ static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
{
suspend_pll.frequency = clk_get_rate(_clk_mpll);
suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
- suspend_freq = s3c_cpufreq_get(0) * 1000;
+ suspend_freq = clk_get_rate(clk_arm);
return 0;
}
@@ -450,7 +446,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
static struct cpufreq_driver s3c24xx_driver = {
.flags = CPUFREQ_STICKY,
.target = s3c_cpufreq_target,
- .get = s3c_cpufreq_get,
+ .get = cpufreq_generic_get,
.init = s3c_cpufreq_init,
.suspend = s3c_cpufreq_suspend,
.resume = s3c_cpufreq_resume,
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 8b49a06..5b0089a 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -19,7 +19,6 @@
#include <linux/regulator/consumer.h>
#include <linux/module.h>
-static struct clk *armclk;
static struct regulator *vddarm;
static unsigned long regulator_latency;
@@ -54,14 +53,6 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
};
#endif
-static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
-{
- if (cpu != 0)
- return 0;
-
- return clk_get_rate(armclk) / 1000;
-}
-
static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
@@ -69,7 +60,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int old_freq, new_freq;
int ret;
- old_freq = clk_get_rate(armclk) / 1000;
+ old_freq = clk_get_rate(policy->clk) / 1000;
new_freq = s3c64xx_freq_table[index].frequency;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
@@ -86,7 +77,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
}
#endif
- ret = clk_set_rate(armclk, new_freq * 1000);
+ ret = clk_set_rate(policy->clk, new_freq * 1000);
if (ret < 0) {
pr_err("Failed to set rate %dkHz: %d\n",
new_freq, ret);
@@ -101,7 +92,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
new_freq, ret);
- if (clk_set_rate(armclk, old_freq * 1000) < 0)
+ if (clk_set_rate(policy->clk, old_freq * 1000) < 0)
pr_err("Failed to restore original clock rate\n");
return ret;
@@ -110,7 +101,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
#endif
pr_debug("Set actual frequency %lukHz\n",
- clk_get_rate(armclk) / 1000);
+ clk_get_rate(policy->clk) / 1000);
return 0;
}
@@ -169,11 +160,11 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
return -ENODEV;
}
- armclk = clk_get(NULL, "armclk");
- if (IS_ERR(armclk)) {
+ policy->clk = clk_get(NULL, "armclk");
+ if (IS_ERR(policy->clk)) {
pr_err("Unable to obtain ARMCLK: %ld\n",
- PTR_ERR(armclk));
- return PTR_ERR(armclk);
+ PTR_ERR(policy->clk));
+ return PTR_ERR(policy->clk);
}
#ifdef CONFIG_REGULATOR
@@ -193,7 +184,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
unsigned long r;
/* Check for frequencies we can generate */
- r = clk_round_rate(armclk, freq->frequency * 1000);
+ r = clk_round_rate(policy->clk, freq->frequency * 1000);
r /= 1000;
if (r != freq->frequency) {
pr_debug("%dkHz unsupported by clock\n",
@@ -203,7 +194,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
/* If we have no regulator then assume startup
* frequency is the maximum we can support. */
- if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
+ if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
freq->frequency = CPUFREQ_ENTRY_INVALID;
freq++;
@@ -219,7 +210,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
pr_err("Failed to configure frequency table: %d\n",
ret);
regulator_put(vddarm);
- clk_put(armclk);
+ clk_put(policy->clk);
}
return ret;
@@ -229,7 +220,7 @@ static struct cpufreq_driver s3c64xx_cpufreq_driver = {
.flags = 0,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = s3c64xx_cpufreq_set_target,
- .get = s3c64xx_cpufreq_get_speed,
+ .get = cpufreq_generic_get,
.init = s3c64xx_cpufreq_driver_init,
.name = "s3c",
};
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a global variable to hold clock anymore.
Cc: Kukjin Kim <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/s5pv210-cpufreq.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index e3973da..da0e291 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -23,7 +23,6 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
-static struct clk *cpu_clk;
static struct clk *dmc0_clk;
static struct clk *dmc1_clk;
static DEFINE_MUTEX(set_freq_lock);
@@ -164,14 +163,6 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
__raw_writel(tmp1, reg);
}
-static unsigned int s5pv210_getspeed(unsigned int cpu)
-{
- if (cpu)
- return 0;
-
- return clk_get_rate(cpu_clk) / 1000;
-}
-
static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned long reg;
@@ -193,7 +184,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
goto exit;
}
- old_freq = s5pv210_getspeed(0);
+ old_freq = policy->cur;
new_freq = s5pv210_freq_table[index].frequency;
/* Finding current running level index */
@@ -471,9 +462,9 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
unsigned long mem_type;
int ret;
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
+ policy->clk = clk_get(NULL, "armclk");
+ if (IS_ERR(policy->clk))
+ return PTR_ERR(policy->clk);
dmc0_clk = clk_get(NULL, "sclk_dmc0");
if (IS_ERR(dmc0_clk)) {
@@ -516,7 +507,7 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
out_dmc1:
clk_put(dmc0_clk);
out_dmc0:
- clk_put(cpu_clk);
+ clk_put(policy->clk);
return ret;
}
@@ -563,7 +554,7 @@ static struct cpufreq_driver s5pv210_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = s5pv210_target,
- .get = s5pv210_getspeed,
+ .get = cpufreq_generic_get,
.init = s5pv210_cpu_init,
.name = "s5pv210",
#ifdef CONFIG_PM
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: [email protected]
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/spear-cpufreq.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
index d9a8c5f..942393d 100644
--- a/drivers/cpufreq/spear-cpufreq.c
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -30,11 +30,6 @@ static struct {
u32 cnt;
} spear_cpufreq;
-static unsigned int spear_cpufreq_get(unsigned int cpu)
-{
- return clk_get_rate(spear_cpufreq.clk) / 1000;
-}
-
static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
{
struct clk *sys_pclk;
@@ -156,6 +151,7 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy,
static int spear_cpufreq_init(struct cpufreq_policy *policy)
{
+ policy->clk = spear_cpufreq.clk;
return cpufreq_generic_init(policy, spear_cpufreq.freq_tbl,
spear_cpufreq.transition_latency);
}
@@ -165,7 +161,7 @@ static struct cpufreq_driver spear_cpufreq_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = spear_cpufreq_target,
- .get = spear_cpufreq_get,
+ .get = cpufreq_generic_get,
.init = spear_cpufreq_init,
.exit = cpufreq_generic_exit,
.attr = cpufreq_generic_attr,
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
Cc: Stephen Warren <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/tegra-cpufreq.c | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index bc7c2a1..b2efad7 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -50,17 +50,6 @@ static struct clk *emc_clk;
static DEFINE_MUTEX(tegra_cpu_lock);
static bool is_suspended;
-static unsigned int tegra_getspeed(unsigned int cpu)
-{
- unsigned long rate;
-
- if (cpu >= NUM_CPUS)
- return 0;
-
- rate = clk_get_rate(cpu_clk) / 1000;
- return rate;
-}
-
static int tegra_cpu_clk_set_rate(unsigned long rate)
{
int ret;
@@ -144,7 +133,7 @@ static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
is_suspended = true;
pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n",
freq_table[0].frequency);
- if (tegra_getspeed(0) != freq_table[0].frequency)
+ if (clk_get_rate(cpu_clk) / 1000 != freq_table[0].frequency)
tegra_update_cpu_speed(policy, freq_table[0].frequency);
cpufreq_cpu_put(policy);
} else if (event == PM_POST_SUSPEND) {
@@ -180,6 +169,7 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
if (policy->cpu == 0)
register_pm_notifier(&tegra_cpu_pm_notifier);
+ policy->clk = cpu_clk;
return 0;
}
@@ -194,7 +184,7 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver tegra_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = tegra_target,
- .get = tegra_getspeed,
+ .get = cpufreq_generic_get,
.init = tegra_cpu_init,
.exit = tegra_cpu_exit,
.name = "tegra",
--
1.7.12.rc2.18.g61b472e
We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We also do clk_get() once instead of doing it again and again in target & init.
Signed-off-by: Viresh Kumar <[email protected]>
---
drivers/cpufreq/unicore2-cpufreq.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c
index 79ca32e..5f7b393 100644
--- a/drivers/cpufreq/unicore2-cpufreq.c
+++ b/drivers/cpufreq/unicore2-cpufreq.c
@@ -11,6 +11,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -35,26 +36,16 @@ static int ucv2_verify_speed(struct cpufreq_policy *policy)
return 0;
}
-static unsigned int ucv2_getspeed(unsigned int cpu)
-{
- struct clk *mclk = clk_get(NULL, "MAIN_CLK");
-
- if (cpu)
- return 0;
- return clk_get_rate(mclk)/1000;
-}
-
static int ucv2_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
- unsigned int cur = ucv2_getspeed(0);
+ unsigned int cur = policy->cur;
struct cpufreq_freqs freqs;
- struct clk *mclk = clk_get(NULL, "MAIN_CLK");
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- if (!clk_set_rate(mclk, target_freq * 1000)) {
+ if (!clk_set_rate(policy->clk, target_freq * 1000)) {
freqs.old = cur;
freqs.new = target_freq;
}
@@ -68,9 +59,13 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
{
if (policy->cpu != 0)
return -EINVAL;
+
policy->min = policy->cpuinfo.min_freq = 250000;
policy->max = policy->cpuinfo.max_freq = 1000000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->clk = clk_get(NULL, "MAIN_CLK");
+ if (IS_ERR(policy->clk))
+ return PTR_ERR(policy->clk);
return 0;
}
@@ -78,7 +73,7 @@ static struct cpufreq_driver ucv2_driver = {
.flags = CPUFREQ_STICKY,
.verify = ucv2_verify_speed,
.target = ucv2_target,
- .get = ucv2_getspeed,
+ .get = cpufreq_generic_get,
.init = ucv2_cpu_init,
.name = "UniCore-II",
};
--
1.7.12.rc2.18.g61b472e
On Friday, August 23, 2013 09:20:35 PM Viresh Kumar wrote:
> CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get
> CPUs clk rate, has similar sort of code used for most of them.
>
> This patchset adds a generic ->get() which will do the same thing for them. All
> those drivers are required to now is to set .get to cpufreq_generic_get() and
> set their clk pointer in policy->clk during ->init().
>
> Later part of this patchset fixes 17 drivers with this change.
>
> That's part 7 of my generic cleanups for CPUFreq core, first six are here:
And that's the last one for 3.13, right?
Rafael
On 24 August 2013 01:10, Rafael J. Wysocki <[email protected]> wrote:
> On Friday, August 23, 2013 09:20:35 PM Viresh Kumar wrote:
>> CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get
>> CPUs clk rate, has similar sort of code used for most of them.
>>
>> This patchset adds a generic ->get() which will do the same thing for them. All
>> those drivers are required to now is to set .get to cpufreq_generic_get() and
>> set their clk pointer in policy->clk during ->init().
>>
>> Later part of this patchset fixes 17 drivers with this change.
>>
>> That's part 7 of my generic cleanups for CPUFreq core, first six are here:
>
> And that's the last one for 3.13, right?
3.13 is too far, can't promise that really :)
On Saturday, August 24, 2013 09:50:06 AM Viresh Kumar wrote:
> On 24 August 2013 01:10, Rafael J. Wysocki <[email protected]> wrote:
> > On Friday, August 23, 2013 09:20:35 PM Viresh Kumar wrote:
> >> CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get
> >> CPUs clk rate, has similar sort of code used for most of them.
> >>
> >> This patchset adds a generic ->get() which will do the same thing for them. All
> >> those drivers are required to now is to set .get to cpufreq_generic_get() and
> >> set their clk pointer in policy->clk during ->init().
> >>
> >> Later part of this patchset fixes 17 drivers with this change.
> >>
> >> That's part 7 of my generic cleanups for CPUFreq core, first six are here:
> >
> > And that's the last one for 3.13, right?
>
> 3.13 is too far, can't promise that really :)
OK, let me rephrase that more directly: Please, slow down. Allow your previous
changes to be integrated before you throw more of them at people.
Thanks,
Rafael
On 24 August 2013 20:20, Rafael J. Wysocki <[email protected]> wrote:
> OK, let me rephrase that more directly: Please, slow down. Allow your previous
> changes to be integrated before you throw more of them at people.
Okay, I will try :)
Btw, Are you going to take any of my patches for 3.12?
Around Fri 23 Aug 2013 21:20:38 +0530 or thereabout, Viresh Kumar wrote:
> We have common infrastructure available with us for getting a CPUs clk rate.
> Lets use it for this driver.
>
> Cc: Hans-Christian Egtvedt <[email protected]>
> Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Hans-Christian Egtvedt <[email protected]>
> ---
> drivers/cpufreq/at32ap-cpufreq.c | 17 +++++------------
> 1 file changed, 5 insertions(+), 12 deletions(-)
<snipp diff>
--
mvh
Hans-Christian Egtvedt
On Fri, Aug 23, 2013 at 5:50 PM, Viresh Kumar <[email protected]> wrote:
> We have common infrastructure available with us for getting a CPUs clk rate.
> Lets use it for this driver.
>
> We don't have to find closest frequency in platform specific ->get() routine
> wihch dbx500 driver was doing and hence it can be removed as well.
>
> Cc: Linus Walleij <[email protected]>
> Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Fri, Aug 23, 2013 at 09:20:39PM +0530, Viresh Kumar wrote:
> We have common infrastructure available with us for getting a CPUs clk rate.
> Lets use it for this driver.
>
> Cc: Shawn Guo <[email protected]>
Both this and imx6q one,
Acked-by: Shawn Guo <[email protected]>
> Signed-off-by: Viresh Kumar <[email protected]>
> ---
> drivers/cpufreq/cpufreq-cpu0.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
> index 7273bfc..62e52e3 100644
> --- a/drivers/cpufreq/cpufreq-cpu0.c
> +++ b/drivers/cpufreq/cpufreq-cpu0.c
> @@ -29,11 +29,6 @@ static struct clk *cpu_clk;
> static struct regulator *cpu_reg;
> static struct cpufreq_frequency_table *freq_table;
>
> -static unsigned int cpu0_get_speed(unsigned int cpu)
> -{
> - return clk_get_rate(cpu_clk) / 1000;
> -}
> -
> static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
> {
> struct opp *opp;
> @@ -99,6 +94,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
>
> static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
> {
> + policy->clk = cpu_clk;
> return cpufreq_generic_init(policy, freq_table, transition_latency);
> }
>
> @@ -106,7 +102,7 @@ static struct cpufreq_driver cpu0_cpufreq_driver = {
> .flags = CPUFREQ_STICKY,
> .verify = cpufreq_generic_frequency_table_verify,
> .target_index = cpu0_set_target,
> - .get = cpu0_get_speed,
> + .get = cpufreq_generic_get,
> .init = cpu0_cpufreq_init,
> .exit = cpufreq_generic_exit,
> .name = "generic_cpu0",
> --
> 1.7.12.rc2.18.g61b472e
>