Dave,
Please pull this batch of fixes intended for the 3.12 stream!
Regarding the Bluetooth bits, Gustavo says:
"First Bluetooth fixes to 3.12, it includes:
* 3 patches to add device id for 3 new hardwares.
* 2 patches from Johan to fix the rfkill behaviour during setup stage
* a small clean up in the rfcomm TTY code that fixes a potential racy
condition (by Gianluca Anzolin)
* 2 fixes to proper set encryption key size and security level in the
peripheral role of Bluetooth LE devices. (by Andre Guedes)
* a fix for dealing devices where pairing is not necessary, we were keeping
the Bluetooth ACL connection alive for too much time. (by Syam Sidhardhan)"
Also, I fixed-up an curly-brace indentation problem in the Bluetooth
code while merging. On top of that...
Alexey Khoroshilov brings a p54usb fix to avoid a resource leak when
request_firmware_nowait fails.
Amitkumar Karwar fixes a firmware hang caused by too much header data
being appended for USB devices using the mwifiex driver.
Arend van Spriel provides three fixes: a brcmfmac fix to relocate some
driver code outside of an .init section; a scheduling while atomic
fix for bcma; and, another scheduling while atomic fix for brcmsmac.
Bing Zhao offers a pair of mwifiex fixes: a code change to avoid
firmware timeouts on USB; and a fix for a NULL pointer dereference.
Christian Lamparter adds a device ID to p54usb.
Felix Fietkau implements a quartet of small ath9k fixes, including
a locking fix, a list management fix, a fix to properly mark a stale
buffer, and an aggregate buffering fix.
Larry Finger champions a data alignment fix to make rtlwifi work
better with ARM builds.
Solomon Peachy reverts an earlier interrupt handling fix for cw1200
and replaces it with a new threaded oneshot irq handler implementation.
Sujith Manoharan fixes an ath9k regression by reverting an earlier
patch.
Please let me know if there are problems!
John
---
The following changes since commit f875691640cd3fa67f7ad1d3130ff9fa7fdca042:
Merge branch 'fixes-for-3.12' of git://gitorious.org/linux-can/linux-can (2013-09-27 02:08:03 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
for you to fetch changes up to 0a878747e18d4d14c5b772dcddddd86bb4c26f8f:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-09-27 13:11:17 -0400)
----------------------------------------------------------------
Alexey Khoroshilov (1):
p54usb: fix leak at failure path in p54u_load_firmware()
Amitkumar Karwar (1):
mwifiex: fix hang issue for USB chipsets
Andre Guedes (2):
Bluetooth: Fix security level for peripheral role
Bluetooth: Fix encryption key size for peripheral role
Arend van Spriel (3):
brcmfmac: obtain platform data upon module initialization
bcma: make bcma_core_pci_{up,down}() callable from atomic context
brcmsmac: call bcma_core_pci_power_save() from non-atomic context
Bing Zhao (2):
mwifiex: fix PCIe hs_cfg cancel cmd timeout
mwifiex: fix NULL pointer dereference in usb suspend handler
Christian Lamparter (1):
p54usb: add USB ID for Corega WLUSB2GTST USB adapter
Felix Fietkau (4):
ath9k: fix stale flag handling on buffer clone
ath9k: do not link bf_next across multiple A-MPDUs
ath9k: don't use BAW tracking on PS responses for non-AMPDU packets
ath9k: add txq locking for ath_tx_aggr_start
Gianluca Anzolin (1):
Bluetooth: don't release the port in rfcomm_dev_state_change()
Johan Hedberg (2):
Bluetooth: Introduce a new HCI_RFKILLED flag
Bluetooth: Fix rfkill functionality during the HCI setup stage
John W. Linville (2):
Merge branch 'master' of git://git.kernel.org/.../bluetooth/bluetooth
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Ken O'Brien (1):
Bluetooth: btusb: Add support for Belkin F8065bf
Larry Finger (1):
rtlwifi: Align private space in rtl_priv struct
Peng Chen (1):
Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.
Raphael Kubo da Costa (1):
Bluetooth: Add support for BCM20702A0 [0b05, 17cb]
Solomon Peachy (2):
Revert "cw1200: Don't perform SPI transfers in interrupt context"
cw1200: Use a threaded oneshot irq handler for cw1200_spi
Sujith Manoharan (1):
ath9k: Fix regression in LNA diversity
Syam Sidhardhan (1):
Bluetooth: Fix ACL alive for long in case of non pariable devices
drivers/bcma/driver_pci.c | 49 ++++++++++++----------
drivers/bluetooth/ath3k.c | 2 +
drivers/bluetooth/btusb.c | 5 +++
drivers/net/wireless/ath/ath9k/recv.c | 7 ----
drivers/net/wireless/ath/ath9k/xmit.c | 17 ++++++--
.../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 28 ++++++-------
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 3 +-
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 14 ++++---
drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 +-
.../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++
drivers/net/wireless/cw1200/cw1200_spi.c | 26 ++++--------
drivers/net/wireless/cw1200/fwio.c | 2 +-
drivers/net/wireless/cw1200/hwbus.h | 1 -
drivers/net/wireless/cw1200/hwio.c | 15 -------
drivers/net/wireless/mwifiex/11n_aggr.c | 3 +-
drivers/net/wireless/mwifiex/11n_aggr.h | 2 +-
drivers/net/wireless/mwifiex/cmdevt.c | 5 +--
drivers/net/wireless/mwifiex/usb.c | 7 ----
drivers/net/wireless/mwifiex/wmm.c | 3 +-
drivers/net/wireless/p54/p54usb.c | 2 +
drivers/net/wireless/rtlwifi/wifi.h | 2 +-
include/linux/bcma/bcma_driver_pci.h | 1 +
include/net/bluetooth/hci.h | 1 +
net/bluetooth/hci_core.c | 26 +++++++++---
net/bluetooth/hci_event.c | 6 ++-
net/bluetooth/l2cap_core.c | 7 ++++
net/bluetooth/rfcomm/tty.c | 35 +---------------
27 files changed, 128 insertions(+), 147 deletions(-)
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index c9fd694..50329d1 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -210,25 +210,6 @@ static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
}
}
-static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up)
-{
- u16 data;
-
- if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
- data = up ? 0x74 : 0x7C;
- bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
- BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
- bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
- BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
- } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
- data = up ? 0x75 : 0x7D;
- bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
- BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
- bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
- BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
- }
-}
-
/**************************************************
* Init.
**************************************************/
@@ -255,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc)
bcma_core_pci_clientmode_init(pc);
}
+void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
+{
+ struct bcma_drv_pci *pc;
+ u16 data;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ pc = &bus->drv_pci[0];
+
+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
+ data = up ? 0x74 : 0x7C;
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
+ data = up ? 0x75 : 0x7D;
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+ }
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
+
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
@@ -310,8 +317,6 @@ void bcma_core_pci_up(struct bcma_bus *bus)
pc = &bus->drv_pci[0];
- bcma_core_pci_power_save(pc, true);
-
bcma_core_pci_extend_L1timer(pc, true);
}
EXPORT_SYMBOL_GPL(bcma_core_pci_up);
@@ -326,7 +331,5 @@ void bcma_core_pci_down(struct bcma_bus *bus)
pc = &bus->drv_pci[0];
bcma_core_pci_extend_L1timer(pc, false);
-
- bcma_core_pci_power_save(pc, false);
}
EXPORT_SYMBOL_GPL(bcma_core_pci_down);
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index a12b923..0a327f4 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0CF3, 0xE005) },
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8e16f0a..f3dfc0a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0b05, 0x17b5) },
+ { USB_DEVICE(0x0b05, 0x17cb) },
{ USB_DEVICE(0x04ca, 0x2003) },
{ USB_DEVICE(0x0489, 0xe042) },
{ USB_DEVICE(0x413c, 0x8197) },
@@ -112,6 +113,9 @@ static struct usb_device_id btusb_table[] = {
/*Broadcom devices with vendor specific id */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+ /* Belkin F8065bf - Broadcom based */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
@@ -148,6 +152,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4ee472a..ab9e3a8 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1270,13 +1270,6 @@ static void ath9k_antenna_check(struct ath_softc *sc,
return;
/*
- * All MPDUs in an aggregate will use the same LNA
- * as the first MPDU.
- */
- if (rs->rs_isaggr && !rs->rs_firstaggr)
- return;
-
- /*
* Change the default rx antenna if rx diversity
* chooses the other antenna 3 times in a row.
*/
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 35b515f..5ac713d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -399,6 +399,7 @@ static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
tbf->bf_buf_addr = bf->bf_buf_addr;
memcpy(tbf->bf_desc, bf->bf_desc, sc->sc_ah->caps.tx_desc_len);
tbf->bf_state = bf->bf_state;
+ tbf->bf_state.stale = false;
return tbf;
}
@@ -1389,11 +1390,15 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn)
{
struct ath_atx_tid *txtid;
+ struct ath_txq *txq;
struct ath_node *an;
u8 density;
an = (struct ath_node *)sta->drv_priv;
txtid = ATH_AN_2_TID(an, tid);
+ txq = txtid->ac->txq;
+
+ ath_txq_lock(sc, txq);
/* update ampdu factor/density, they may have changed. This may happen
* in HT IBSS when a beacon with HT-info is received after the station
@@ -1417,6 +1422,8 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf));
txtid->baw_head = txtid->baw_tail = 0;
+ ath_txq_unlock_complete(sc, txq);
+
return 0;
}
@@ -1555,8 +1562,10 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
__skb_unlink(bf->bf_mpdu, tid_q);
list_add_tail(&bf->list, &bf_q);
ath_set_rates(tid->an->vif, tid->an->sta, bf);
- ath_tx_addto_baw(sc, tid, bf);
- bf->bf_state.bf_type &= ~BUF_AGGR;
+ if (bf_isampdu(bf)) {
+ ath_tx_addto_baw(sc, tid, bf);
+ bf->bf_state.bf_type &= ~BUF_AGGR;
+ }
if (bf_tail)
bf_tail->bf_next = bf;
@@ -1950,7 +1959,9 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth++;
- bf = bf->bf_lastbf->bf_next;
+ bf_last = bf->bf_lastbf;
+ bf = bf_last->bf_next;
+ bf_last->bf_next = NULL;
}
}
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 64f4a2b..c3462b7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -464,8 +464,6 @@ static struct sdio_driver brcmf_sdmmc_driver = {
static int brcmf_sdio_pd_probe(struct platform_device *pdev)
{
- int ret;
-
brcmf_dbg(SDIO, "Enter\n");
brcmfmac_sdio_pdata = pdev->dev.platform_data;
@@ -473,11 +471,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev)
if (brcmfmac_sdio_pdata->power_on)
brcmfmac_sdio_pdata->power_on();
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
- if (ret)
- brcmf_err("sdio_register_driver failed: %d\n", ret);
-
- return ret;
+ return 0;
}
static int brcmf_sdio_pd_remove(struct platform_device *pdev)
@@ -500,6 +494,15 @@ static struct platform_driver brcmf_sdio_pd = {
}
};
+void brcmf_sdio_register(void)
+{
+ int ret;
+
+ ret = sdio_register_driver(&brcmf_sdmmc_driver);
+ if (ret)
+ brcmf_err("sdio_register_driver failed: %d\n", ret);
+}
+
void brcmf_sdio_exit(void)
{
brcmf_dbg(SDIO, "Enter\n");
@@ -510,18 +513,13 @@ void brcmf_sdio_exit(void)
sdio_unregister_driver(&brcmf_sdmmc_driver);
}
-void brcmf_sdio_init(void)
+void __init brcmf_sdio_init(void)
{
int ret;
brcmf_dbg(SDIO, "Enter\n");
ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
- if (ret == -ENODEV) {
- brcmf_dbg(SDIO, "No platform data available, registering without.\n");
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
- }
-
- if (ret)
- brcmf_err("driver registration failed: %d\n", ret);
+ if (ret == -ENODEV)
+ brcmf_dbg(SDIO, "No platform data available.\n");
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index f7c1985..74156f8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -156,10 +156,11 @@ extern int brcmf_bus_start(struct device *dev);
#ifdef CONFIG_BRCMFMAC_SDIO
extern void brcmf_sdio_exit(void);
extern void brcmf_sdio_init(void);
+extern void brcmf_sdio_register(void);
#endif
#ifdef CONFIG_BRCMFMAC_USB
extern void brcmf_usb_exit(void);
-extern void brcmf_usb_init(void);
+extern void brcmf_usb_register(void);
#endif
#endif /* _BRCMF_BUS_H_ */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index e067aec..40e7f85 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -1231,21 +1231,23 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp)
return bus->chip << 4 | bus->chiprev;
}
-static void brcmf_driver_init(struct work_struct *work)
+static void brcmf_driver_register(struct work_struct *work)
{
- brcmf_debugfs_init();
-
#ifdef CONFIG_BRCMFMAC_SDIO
- brcmf_sdio_init();
+ brcmf_sdio_register();
#endif
#ifdef CONFIG_BRCMFMAC_USB
- brcmf_usb_init();
+ brcmf_usb_register();
#endif
}
-static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init);
+static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
static int __init brcmfmac_module_init(void)
{
+ brcmf_debugfs_init();
+#ifdef CONFIG_BRCMFMAC_SDIO
+ brcmf_sdio_init();
+#endif
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 39e01a7..f4aea47 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1539,7 +1539,7 @@ void brcmf_usb_exit(void)
brcmf_release_fw(&fw_image_list);
}
-void brcmf_usb_init(void)
+void brcmf_usb_register(void)
{
brcmf_dbg(USB, "Enter\n");
INIT_LIST_HEAD(&fw_image_list);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 3a65447..edc5d10 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -457,6 +457,8 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
if (err != 0)
brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
__func__, err);
+
+ bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
return err;
}
@@ -479,6 +481,8 @@ static void brcms_ops_stop(struct ieee80211_hw *hw)
return;
}
+ bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
+
/* put driver in down state */
spin_lock_bh(&wl->lock);
brcms_down(wl);
diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c
index f5e6b48..899cad3 100644
--- a/drivers/net/wireless/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/cw1200/cw1200_spi.c
@@ -42,7 +42,6 @@ struct hwbus_priv {
spinlock_t lock; /* Serialize all bus operations */
wait_queue_head_t wq;
int claimed;
- int irq_disabled;
};
#define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2)
@@ -238,8 +237,6 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id)
struct hwbus_priv *self = dev_id;
if (self->core) {
- disable_irq_nosync(self->func->irq);
- self->irq_disabled = 1;
cw1200_irq_handler(self->core);
return IRQ_HANDLED;
} else {
@@ -253,9 +250,10 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self)
pr_debug("SW IRQ subscribe\n");
- ret = request_any_context_irq(self->func->irq, cw1200_spi_irq_handler,
- IRQF_TRIGGER_HIGH,
- "cw1200_wlan_irq", self);
+ ret = request_threaded_irq(self->func->irq, NULL,
+ cw1200_spi_irq_handler,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "cw1200_wlan_irq", self);
if (WARN_ON(ret < 0))
goto exit;
@@ -273,22 +271,13 @@ exit:
static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
{
+ int ret = 0;
+
pr_debug("SW IRQ unsubscribe\n");
disable_irq_wake(self->func->irq);
free_irq(self->func->irq, self);
- return 0;
-}
-
-static int cw1200_spi_irq_enable(struct hwbus_priv *self, int enable)
-{
- /* Disables are handled by the interrupt handler */
- if (enable && self->irq_disabled) {
- enable_irq(self->func->irq);
- self->irq_disabled = 0;
- }
-
- return 0;
+ return ret;
}
static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
@@ -368,7 +357,6 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = {
.unlock = cw1200_spi_unlock,
.align_size = cw1200_spi_align_size,
.power_mgmt = cw1200_spi_pm,
- .irq_enable = cw1200_spi_irq_enable,
};
/* Probe Function to be called by SPI stack when device is discovered */
diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index 0b2061b..acdff0f 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -485,7 +485,7 @@ int cw1200_load_firmware(struct cw1200_common *priv)
/* Enable interrupt signalling */
priv->hwbus_ops->lock(priv->hwbus_priv);
- ret = __cw1200_irq_enable(priv, 2);
+ ret = __cw1200_irq_enable(priv, 1);
priv->hwbus_ops->unlock(priv->hwbus_priv);
if (ret < 0)
goto unsubscribe;
diff --git a/drivers/net/wireless/cw1200/hwbus.h b/drivers/net/wireless/cw1200/hwbus.h
index 51dfb3a..8b2fc83 100644
--- a/drivers/net/wireless/cw1200/hwbus.h
+++ b/drivers/net/wireless/cw1200/hwbus.h
@@ -28,7 +28,6 @@ struct hwbus_ops {
void (*unlock)(struct hwbus_priv *self);
size_t (*align_size)(struct hwbus_priv *self, size_t size);
int (*power_mgmt)(struct hwbus_priv *self, bool suspend);
- int (*irq_enable)(struct hwbus_priv *self, int enable);
};
#endif /* CW1200_HWBUS_H */
diff --git a/drivers/net/wireless/cw1200/hwio.c b/drivers/net/wireless/cw1200/hwio.c
index 41bd761..ff230b7 100644
--- a/drivers/net/wireless/cw1200/hwio.c
+++ b/drivers/net/wireless/cw1200/hwio.c
@@ -273,21 +273,6 @@ int __cw1200_irq_enable(struct cw1200_common *priv, int enable)
u16 val16;
int ret;
- /* We need to do this hack because the SPI layer can sleep on I/O
- and the general path involves I/O to the device in interrupt
- context.
-
- However, the initial enable call needs to go to the hardware.
-
- We don't worry about shutdown because we do a full reset which
- clears the interrupt enabled bits.
- */
- if (priv->hwbus_ops->irq_enable) {
- ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable);
- if (ret || enable < 2)
- return ret;
- }
-
if (HIF_8601_SILICON == priv->hw_type) {
ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
if (ret < 0) {
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index 21c6882..1214c58 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -150,7 +150,7 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
*/
int
mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
- struct mwifiex_ra_list_tbl *pra_list, int headroom,
+ struct mwifiex_ra_list_tbl *pra_list,
int ptrindex, unsigned long ra_list_flags)
__releases(&priv->wmm.ra_list_spinlock)
{
@@ -160,6 +160,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
int pad = 0, ret;
struct mwifiex_tx_param tx_param;
struct txpd *ptx_pd = NULL;
+ int headroom = adapter->iface_type == MWIFIEX_USB ? 0 : INTF_HEADER_LEN;
skb_src = skb_peek(&pra_list->skb_head);
if (!skb_src) {
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.h b/drivers/net/wireless/mwifiex/11n_aggr.h
index 900e1c6..892098d 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.h
+++ b/drivers/net/wireless/mwifiex/11n_aggr.h
@@ -26,7 +26,7 @@
int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv,
struct sk_buff *skb);
int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
- struct mwifiex_ra_list_tbl *ptr, int headroom,
+ struct mwifiex_ra_list_tbl *ptr,
int ptr_index, unsigned long flags)
__releases(&priv->wmm.ra_list_spinlock);
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 2d76147..a6c46f3 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1155,7 +1155,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions);
if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE) &&
- adapter->iface_type == MWIFIEX_SDIO) {
+ adapter->iface_type != MWIFIEX_USB) {
mwifiex_hs_activated_event(priv, true);
return 0;
} else {
@@ -1167,8 +1167,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
}
if (conditions != HS_CFG_CANCEL) {
adapter->is_hs_configured = true;
- if (adapter->iface_type == MWIFIEX_USB ||
- adapter->iface_type == MWIFIEX_PCIE)
+ if (adapter->iface_type == MWIFIEX_USB)
mwifiex_hs_activated_event(priv, true);
} else {
adapter->is_hs_configured = false;
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 2472d4b..1c70b8d 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -447,9 +447,6 @@ static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message)
*/
adapter->is_suspended = true;
- for (i = 0; i < adapter->priv_num; i++)
- netif_carrier_off(adapter->priv[i]->netdev);
-
if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb)
usb_kill_urb(card->rx_cmd.urb);
@@ -509,10 +506,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf)
MWIFIEX_RX_CMD_BUF_SIZE);
}
- for (i = 0; i < adapter->priv_num; i++)
- if (adapter->priv[i]->media_connected)
- netif_carrier_on(adapter->priv[i]->netdev);
-
/* Disable Host Sleep */
if (adapter->hs_activated)
mwifiex_cancel_hs(mwifiex_get_priv(adapter,
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 2e8f9cd..95fa359 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -1239,8 +1239,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) &&
mwifiex_is_11n_aggragation_possible(priv, ptr,
adapter->tx_buf_size))
- mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN,
- ptr_index, flags);
+ mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags);
/* ra_list_spinlock has been freed in
mwifiex_11n_aggregate_pkt() */
else
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index b9deef6..e328d30 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -83,6 +83,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
{USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
@@ -979,6 +980,7 @@ static int p54u_load_firmware(struct ieee80211_hw *dev,
if (err) {
dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
"(%d)!\n", p54u_fwlist[i].fw, err);
+ usb_put_dev(udev);
}
return err;
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index cc03e7c..7032587 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -2057,7 +2057,7 @@ struct rtl_priv {
that it points to the data allocated
beyond this structure like:
rtl_pci_priv or rtl_usb_priv */
- u8 priv[0];
+ u8 priv[0] __aligned(sizeof(void *));
};
#define rtl_priv(hw) (((struct rtl_priv *)(hw)->priv))
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
index d66033f..0333e60 100644
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -242,6 +242,7 @@ extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
struct bcma_device *core, bool enable);
extern void bcma_core_pci_up(struct bcma_bus *bus);
extern void bcma_core_pci_down(struct bcma_bus *bus);
+extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index aaeaf09..15f1084 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -104,6 +104,7 @@ enum {
enum {
HCI_SETUP,
HCI_AUTO_OFF,
+ HCI_RFKILLED,
HCI_MGMT,
HCI_PAIRABLE,
HCI_SERVICE_CACHE,
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 634deba..fb7356f 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1146,7 +1146,11 @@ int hci_dev_open(__u16 dev)
goto done;
}
- if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
+ /* Check for rfkill but allow the HCI setup stage to proceed
+ * (which in itself doesn't cause any RF activity).
+ */
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags) &&
+ !test_bit(HCI_SETUP, &hdev->dev_flags)) {
ret = -ERFKILL;
goto done;
}
@@ -1566,10 +1570,13 @@ static int hci_rfkill_set_block(void *data, bool blocked)
BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
- if (!blocked)
- return 0;
-
- hci_dev_do_close(hdev);
+ if (blocked) {
+ set_bit(HCI_RFKILLED, &hdev->dev_flags);
+ if (!test_bit(HCI_SETUP, &hdev->dev_flags))
+ hci_dev_do_close(hdev);
+ } else {
+ clear_bit(HCI_RFKILLED, &hdev->dev_flags);
+ }
return 0;
}
@@ -1591,9 +1598,13 @@ static void hci_power_on(struct work_struct *work)
return;
}
- if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+ hci_dev_do_close(hdev);
+ } else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
queue_delayed_work(hdev->req_workqueue, &hdev->power_off,
HCI_AUTO_OFF_TIMEOUT);
+ }
if (test_and_clear_bit(HCI_SETUP, &hdev->dev_flags))
mgmt_index_added(hdev);
@@ -2209,6 +2220,9 @@ int hci_register_dev(struct hci_dev *hdev)
}
}
+ if (hdev->rfkill && rfkill_blocked(hdev->rfkill))
+ set_bit(HCI_RFKILLED, &hdev->dev_flags);
+
set_bit(HCI_SETUP, &hdev->dev_flags);
if (hdev->dev_type != HCI_AMP)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 94aab73..8db3e89 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3557,7 +3557,11 @@ static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
cp.handle = cpu_to_le16(conn->handle);
if (ltk->authenticated)
- conn->sec_level = BT_SECURITY_HIGH;
+ conn->pending_sec_level = BT_SECURITY_HIGH;
+ else
+ conn->pending_sec_level = BT_SECURITY_MEDIUM;
+
+ conn->enc_key_size = ltk->enc_size;
hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b3bb7bc..63fa111 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3755,6 +3755,13 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
sk = chan->sk;
+ /* For certain devices (ex: HID mouse), support for authentication,
+ * pairing and bonding is optional. For such devices, inorder to avoid
+ * the ACL alive for too long after L2CAP disconnection, reset the ACL
+ * disc_timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect.
+ */
+ conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
+
bacpy(&bt_sk(sk)->src, conn->src);
bacpy(&bt_sk(sk)->dst, conn->dst);
chan->psm = psm;
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 6d126fa..84fcf9f 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -569,7 +569,6 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb)
static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
{
struct rfcomm_dev *dev = dlc->owner;
- struct tty_struct *tty;
if (!dev)
return;
@@ -581,38 +580,8 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
DPM_ORDER_DEV_AFTER_PARENT);
wake_up_interruptible(&dev->port.open_wait);
- } else if (dlc->state == BT_CLOSED) {
- tty = tty_port_tty_get(&dev->port);
- if (!tty) {
- if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
- /* Drop DLC lock here to avoid deadlock
- * 1. rfcomm_dev_get will take rfcomm_dev_lock
- * but in rfcomm_dev_add there's lock order:
- * rfcomm_dev_lock -> dlc lock
- * 2. tty_port_put will deadlock if it's
- * the last reference
- *
- * FIXME: when we release the lock anything
- * could happen to dev, even its destruction
- */
- rfcomm_dlc_unlock(dlc);
- if (rfcomm_dev_get(dev->id) == NULL) {
- rfcomm_dlc_lock(dlc);
- return;
- }
-
- if (!test_and_set_bit(RFCOMM_TTY_RELEASED,
- &dev->flags))
- tty_port_put(&dev->port);
-
- tty_port_put(&dev->port);
- rfcomm_dlc_lock(dlc);
- }
- } else {
- tty_hangup(tty);
- tty_kref_put(tty);
- }
- }
+ } else if (dlc->state == BT_CLOSED)
+ tty_port_tty_hangup(&dev->port, false);
}
static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig)
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.
From: "John W. Linville" <[email protected]>
Date: Fri, 27 Sep 2013 14:05:49 -0400
> Please pull this batch of fixes intended for the 3.12 stream!
Pulled, thanks a lot John.