Hi,
I was trying to debug kernel crashes on Marvell Kirkwood (openrd)
when upgrading from GCC 4.7.3 -> GCC 4.8.2. So I enabled most of the
kernel debug options. However, I noticed that already when compiled with
GCC 4.7.3 kernel crashes consistently at boot when DEBUG_VM is enabled
(without it there are no issues with 4.7.3). See below for the boot/crash
log & kernel config.
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.12.0-rc6-openrd-los.git-1836ad9-dirty (aaro@blackmetal) (gcc version 4.7.3 (GCC) ) #3 PREEMPT Thu Oct 24 22:24:41 EEST 2013
[ 0.000000] Kernel command line: mtdparts=orion_nand:0x400000@0x100000(kernel),0x400000@0x500000(initramfs),0x1f700000@0x900000(scratch) coherent_pool=1M console=tty console=ttyS0,115200 root=/dev/ram
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0460ef4 (4452 kB)
[ 0.000000] .init : 0xc0461000 - 0xc04867ec ( 150 kB)
[ 0.000000] .data : 0xc0488000 - 0xc04c3840 ( 239 kB)
[ 0.000000] .bss : 0xc04c384c - 0xc0a4abb8 (5661 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 16.052020] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 16.140038] pid_max: default: 32768 minimum: 301
[ 16.141473] Mount-cache hash table entries: 512
[ 16.146219] CPU: Testing write buffer coherency: ok
[ 16.148161] Setting up static identity map for 0xc03549b8 - 0xc0354a10
[ 16.155137] devtmpfs: initialized
[ 16.172296] pinctrl core: initialized pinctrl subsystem
[ 16.173772] NET: Registered protocol family 16
[ 16.177170] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 16.191442] cpuidle: using governor ladder
[ 16.191507] cpuidle: using governor menu
[ 16.191635] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 16.191688] Feroceon L2: Enabling L2
[ 16.191750] Feroceon L2: Cache support initialised.
[ 16.209023] Kirkwood PCIe port 0: link up
[ 16.209087] PCI: bus0 uses PCIe port 0
[ 16.211932] PCI host bridge to bus 0000:00
[ 16.211999] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 16.212056] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 16.212110] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 16.215233] PCI: bus0: Fast back to back transfers disabled
[ 16.215387] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 16.215452] pci 0000:00:01.0: BAR 1: assigned [mem 0xe4000000-0xe403ffff]
[ 16.215508] pci 0000:00:01.0: BAR 6: assigned [mem 0xe4040000-0xe404ffff pref]
[ 16.215560] pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x107f]
[ 16.295354] bio: create slab <bio-0> at 0
[ 16.302504] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 16.302574] vgaarb: loaded
[ 16.302599] vgaarb: bridge control possible 0000:00:01.0
[ 16.307102] SCSI subsystem initialized
[ 16.313363] usbcore: registered new interface driver usbfs
[ 16.314222] usbcore: registered new interface driver hub
[ 16.315166] usbcore: registered new device driver usb
[ 16.324299] Switched to clocksource orion_clocksource
[ 16.404262] NET: Registered protocol family 2
[ 16.408193] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 16.409221] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[ 16.411011] TCP: Hash tables configured (established 4096 bind 4096)
[ 16.411430] TCP: reno registered
[ 16.411605] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 16.412008] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 16.413605] NET: Registered protocol family 1
[ 16.416766] Unpacking initramfs...
[ 18.899556] Freeing initrd memory: 2372K (c8001000 - c8252000)
[ 19.802172] msgmni has been set to 993
[ 19.822537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 19.822681] io scheduler noop registered
[ 19.841810] io scheduler cfq registered (default)
[ 19.870288] mv_xor mv_xor.0: Marvell shared XOR driver
[ 19.905199] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 19.944965] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 19.946525] mv_xor mv_xor.1: Marvell shared XOR driver
[ 19.985106] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 20.025107] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 20.043950] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 20.112963] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 20.554414] console [ttyS0] enabled
[ 20.613682] sata_mv sata_mv.0: cannot get optional clkdev
[ 20.625897] sata_mv sata_mv.0: slots 32 ports 2
[ 20.708528] scsi0 : sata_mv
[ 20.745072] scsi1 : sata_mv
[ 20.762492] ata1: SATA max UDMA/133 irq 21
[ 20.774247] ata2: SATA max UDMA/133 irq 21
[ 20.835014] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[ 20.855184] Scanning device for bad blocks
[ 21.124351] ata1: SATA link down (SStatus 0 SControl F300)
[ 21.200851] 3 cmdlinepart partitions found on MTD device orion_nand
[ 21.207215] Creating 3 MTD partitions on "orion_nand":
[ 21.212437] 0x000000100000-0x000000500000 : "kernel"
[ 21.245866] 0x000000500000-0x000000900000 : "initramfs"
[ 21.291871] 0x000000900000-0x000020000000 : "scratch"
[ 21.501885] libphy: orion_mdio_bus: probed
[ 21.515574] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 22.553004] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:01:dc:35
[ 23.584385] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:50:43:01:dc:36
[ 23.609462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.616169] ehci-pci: EHCI PCI platform driver
[ 23.621794] ehci-orion: EHCI orion driver
[ 23.633667] orion-ehci orion-ehci.0: EHCI Host Controller
[ 23.640045] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 23.648563] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 23.674381] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 23.694492] hub 1-0:1.0: USB hub found
[ 23.704476] hub 1-0:1.0: 1 port detected
[ 23.722149] usbcore: registered new interface driver usb-storage
[ 23.738795] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 23.762500] i2c /dev entries driver
[ 23.813122] md: raid1 personality registered for level 1
[ 23.857811] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
[ 23.902132] mvsdio mvsdio: no pins associated
[ 23.954372] mvsdio mvsdio: using GPIO for card detection
[ 24.024876] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 24.035800] usbcore: registered new interface driver usbhid
[ 24.054640] usbhid: USB HID core driver
[ 24.058880] xgifb 0000:00:01.0: Relocate IO address: 1000 [00001030]
[ 24.067501] xgifb 0000:00:01.0: chipid = 32
[ 24.071737] xgifb: SR14=51 DramSzie 2000000 ChannelNum 1
[ 24.078041] xgifb 0000:00:01.0: Framebuffer at 0xe0000000, mapped to 0xe1000000, size 32768k
[ 24.087684] xgifb 0000:00:01.0: MMIO at 0xe4000000, mapped to 0xe0a00000, size 256k
[ 24.103396] xgifb 0000:00:01.0: No or unknown bridge type detected
[ 24.110921] xgifb: Default mode is 800x600x16 (60Hz)
[ 24.224823] hub 1-1:1.0: USB hub found
[ 24.225087] hub 1-1:1.0: 7 ports detected
[ 24.289262] Console: switching to colour frame buffer device 100x37
[ 24.485280] oprofile: no performance counters
[ 24.565947] oprofile: using timer interrupt.
[ 24.633314] TCP: cubic registered
[ 24.691013] NET: Registered protocol family 17
[ 24.775375] rtc-mv rtc-mv: setting system clock to 2013-10-24 10:17:43 UTC (1382609863)
[ 26.694345] ata2: link is slow to respond, please be patient (ready=0)
[ 31.194346] ata2: SRST failed (errno=-16)
[ 31.754426] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 31.834619] ata2.00: ATA-6: eSATA-2 WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 31.899627] ata2.00: 976773168 sectors, multi 0: LBA48
[ 31.994458] ata2.00: configured for UDMA/133
[ 32.075306] ------------[ cut here ]------------
[ 32.136256] kernel BUG at mm/util.c:390!
[ 32.195446] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
[ 32.255893] Modules linked in:
[ 32.313109] CPU: 0 PID: 12 Comm: kworker/u2:1 Not tainted 3.12.0-rc6-openrd-los.git-1836ad9-dirty #3
[ 32.435821] Workqueue: events_unbound async_run_entry_fn
[ 32.498701] task: df854700 ti: df8a8000 task.ti: df8a8000
[ 32.561662] PC is at page_mapping+0x48/0x50
[ 32.622764] LR is at flush_kernel_dcache_page+0x14/0x98
[ 32.685421] pc : [<c00923c4>] lr : [<c0010dd8>] psr: 20000093
[ 32.685421] sp : df8a99f8 ip : df8a9a08 fp : df8a9a04
[ 32.812754] r10: 60000093 r9 : df8a9c24 r8 : 00000024
[ 32.874269] r7 : 00000000 r6 : c0a3cd0c r5 : 00001000 r4 : c0e2732c
[ 32.936395] r3 : 00000000 r2 : 00000080 r1 : 00000564 r0 : c0e2732c
[ 32.996978] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 33.059012] Control: 0005317f Table: 1a8dc000 DAC: 00000017
[ 33.119473] Process kworker/u2:1 (pid: 12, stack limit = 0xdf8a81c0)
[ 33.181275] Stack: (0xdf8a99f8 to 0xdf8aa000)
[ 33.241477] 99e0: df8a9a1c df8a9a08
[ 33.306737] 9a00: c0010dd8 c009238c 00000003 df8a9a64 df8a9a3c df8a9a20 c0172b60 c0010dd4
[ 33.372503] 9a20: 02050000 df8a9a64 00001000 c0a3cd0c df8a9a5c df8a9a40 c0172f20 c0172aa8
[ 33.438643] 9a40: 02050000 00000024 00001000 c0a3cd0c df8a9ab4 df8a9a60 c0173138 c0172f1c
[ 33.504403] 9a60: c005bbec c0e2732c db733540 00000024 00000024 dfa74140 00000000 00000001
[ 33.570947] 9a80: 00000001 00000564 00000000 00000003 df8a9af0 da880140 60000093 00000000
[ 33.636483] 9aa0: 00000000 da8f9b30 df8a9acc df8a9ab8 c0173214 c0173058 00000000 00000000
[ 33.701181] 9ac0: df8a9aec df8a9ad0 c01f53d4 c0173204 da880140 dfbbd7c0 dfbbc000 80000013
[ 33.766105] 9ae0: df8a9b14 df8a9af0 c01f676c c01f5370 dfbbd7c0 dfbbd990 da880140 c01d91f4
[ 33.830735] 9b00: c01f2b30 da880140 df8a9b34 df8a9b18 c01f6b70 c01f6574 da8f9a40 da8cf038
[ 33.895269] 9b20: da880140 df84bd40 df8a9b5c df8a9b38 c01d9ab4 c01f6a28 00000006 da8f9a40
[ 33.959262] 9b40: da8cf038 df84bd40 da880140 da8b3498 df8a9b94 df8a9b60 c01e024c c01d99e0
[ 34.023595] 9b60: c01536f0 00000002 00000001 da8cf038 da8b3498 00000002 00000001 00000000
[ 34.088496] 9b80: df8a9c24 df8a9bd8 df8a9bac df8a9b98 c014c8f8 c01dff74 df854700 da8cf038
[ 34.154093] 9ba0: df8a9bcc df8a9bb0 c0153714 c014c8cc da8e9b40 da8b3498 da8cf038 00000001
[ 34.219963] 9bc0: df8a9cbc df8a9bd0 c015381c c01536b8 c0153678 0001b733 00000000 00000001
[ 34.285643] 9be0: dead4ead ffffffff ffffffff c0a37b18 00000000 00000000 c03fb5d0 df8a9bfc
[ 34.350424] 9c00: df8a9bfc 00000000 00000001 dead4ead ffffffff ffffffff c0a37b18 00000000
[ 34.414507] 9c20: 00000000 c03fb5d0 df8a9bfc df8a9bfc da8e95a0 da8b3498 df8a9c5c df8a9c48
[ 34.478998] 9c40: c00e9134 c0153af4 00000001 da8e95a0 df8a9c74 df8a9c60 c014fb70 c00e911c
[ 34.543804] 9c60: da8b3498 da8e95a0 df8a9c94 df8a9c78 c0153300 c014fb3c 00000000 da8cf038
[ 34.609143] 9c80: da8b3498 da8e95a0 df8a9cbc df8a9c98 c01533cc da8b3498 da8f9a40 00000024
[ 34.674258] 9ca0: df8a9d78 df8a9d6c da8f9a40 db733540 df8a9cec df8a9cc0 c01df098 c0153780
[ 34.739299] 9cc0: 00000010 00000000 da8e9b40 db733540 df8a9d70 da8f9a40 00000002 df8a9d78
[ 34.804244] 9ce0: df8a9d2c df8a9cf0 c01df198 c01defec 00000024 da8e9b40 00000802 00000003
[ 34.869978] 9d00: 00000000 df8a9d6c 00000024 00000001 db733540 00000003 00000000 00000024
[ 34.936281] 9d20: df8a9db4 df8a9d30 c01e1960 c01df120 00000024 df8a9d70 00000802 00000003
[ 35.003535] 9d40: df8a9d6c 00000000 df8a9d64 df8a9dc4 00000000 00000000 da91cdc0 00000024
[ 35.070242] 9d60: db733540 df84bd40 00000002 00000000 c01e2b28 c049a060 00000012 df8a0024
[ 35.136594] 9d80: da91cdd8 df84bec0 c005c620 da91cdc0 df84bd40 df84bda8 00000000 00000000
[ 35.202723] 9da0: 00000005 00000001 df8a9dec df8a9db8 c01e2b90 c01e17ec 00000001 00000000
[ 35.268783] 9dc0: df8a9e14 ffffffed c003b52c dfbbd7c0 00000000 dfbbd4e0 dfbbc000 00000000
[ 35.334914] 9de0: df8a9e24 df8a9df0 c01f6ed0 c01e2ac0 00000000 00000000 dfbbc000 00000002
[ 35.399891] 9e00: 00000000 dfbbc000 df8a9ea8 dfb885a0 df8a8000 dfb885b0 df8a9e44 df8a9e28
[ 35.465509] 9e20: c01f23d8 c01f6dc4 00000000 c04c387c dfb885b0 df80a600 df8a9e84 df8a9e48
[ 35.531946] 9e40: c003b3a0 c01f238c c005bbec c0059b8c 00000002 00000000 00000000 c002dc38
[ 35.598293] 9e60: df834360 dfb885b0 df80a600 df8a9ea8 00000000 df82f000 df8a9ee4 df8a9e88
[ 35.664981] 9e80: c002dcb4 c003b368 00000002 00000000 c002dc38 df8a9ea0 c035195c 00000002
[ 35.732054] 9ea0: 00000000 00000000 c04c6504 c05f6e84 00000000 c03fd508 c0353c7c df834360
[ 35.799094] 9ec0: df80a630 df834378 df8a8000 df8a8000 df80a600 c04c3715 df8a9f24 df8a9ee8
[ 35.866706] 9ee0: c002e35c c002db14 df871e20 df871e0c 00000000 df8a8000 c002e218 df871e0c
[ 35.934160] 9f00: 00000000 df834360 c002e218 00000000 00000000 00000000 df8a9fac df8a9f28
[ 36.002057] 9f20: c0034c10 c002e228 df8a9f44 00000000 c005c620 df834360 00000000 00000001
[ 36.070273] 9f40: dead4ead ffffffff ffffffff c04c6468 00000000 00000000 c03fb5d0 df8a9f5c
[ 36.138491] 9f60: df8a9f5c 00000000 00000001 dead4ead ffffffff ffffffff c04c6468 00000000
[ 36.206898] 9f80: 00000000 c03fb5d0 df8a9f88 df8a9f88 df871e0c c0034b64 00000000 00000000
[ 36.275340] 9fa0: 00000000 df8a9fb0 c0009380 c0034b74 00000000 00000000 00000000 00000000
[ 36.343814] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 36.411211] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 aaaaaaaa aaaaaaaa
[ 36.477203] Backtrace:
[ 36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
[ 36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
[ 36.792813] r4:df8a9a64 r3:00000003
[ 36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)
[ 36.929977] r6:c0a3cd0c r5:00001000 r4:df8a9a64 r3:02050000
[ 36.999651] [<c0172f0c>] (sg_miter_next+0x0/0x13c) from [<c0173138>] (sg_copy_buffer+0xf0/0x128)
[ 37.074390] r6:c0a3cd0c r5:00001000 r4:00000024 r3:02050000
[ 37.146230] [<c0173048>] (sg_copy_buffer+0x0/0x128) from [<c0173214>] (sg_copy_from_buffer+0x20/0x28)
[ 37.289344] [<c01731f4>] (sg_copy_from_buffer+0x0/0x28) from [<c01f53d4>] (ata_scsi_rbuf_fill+0x74/0x90)
[ 37.438205] [<c01f5360>] (ata_scsi_rbuf_fill+0x0/0x90) from [<c01f676c>] (ata_scsi_simulate+0x208/0x27c)
[ 16.118512] r7:80000013 r6:dfbbc000 r5:dfbbd7c0 r4:da880140
[ 16.198511] [<c01f6564>] (ata_scsi_simulate+0x0/0x27c) from [<c01f6b70>] (ata_scsi_queuecmd+0x158/0x258)
[ 16.358530] r4:da880140
[ 16.435034] [<c01f6a18>] (ata_scsi_queuecmd+0x0/0x258) from [<c01d9ab4>] (scsi_dispatch_cmd+0xe4/0x1d0)
[ 16.596880] r7:df84bd40 r6:da880140 r5:da8cf038 r4:da8f9a40
[ 16.680116] [<c01d99d0>] (scsi_dispatch_cmd+0x0/0x1d0) from [<c01e024c>] (scsi_request_fn+0x2e8/0x49c)
[ 16.846496] r8:da8b3498 r7:da880140 r6:df84bd40 r5:da8cf038 r4:da8f9a40
r3:00000006
[ 17.013091] [<c01dff64>] (scsi_request_fn+0x0/0x49c) from [<c014c8f8>] (__blk_run_queue+0x3c/0x4c)
[ 17.184886] [<c014c8bc>] (__blk_run_queue+0x0/0x4c) from [<c0153714>] (blk_execute_rq_nowait+0x6c/0xc8)
[ 17.365484] r4:da8cf038 r3:df854700
[ 17.454328] [<c01536a8>] (blk_execute_rq_nowait+0x0/0xc8) from [<c015381c>] (blk_execute_rq+0xac/0xf4)
[ 17.634851] r7:00000001 r6:da8cf038 r5:da8b3498 r4:da8e9b40
[ 17.725636] [<c0153770>] (blk_execute_rq+0x0/0xf4) from [<c01df098>] (scsi_execute+0xbc/0x134)
[ 17.819818] [<c01defdc>] (scsi_execute+0x0/0x134) from [<c01df198>] (scsi_execute_req_flags+0x88/0xf8)
[ 18.000480] [<c01df110>] (scsi_execute_req_flags+0x0/0xf8) from [<c01e1960>] (scsi_probe_and_add_lun+0x184/0x9b4)
[ 18.183748] [<c01e17dc>] (scsi_probe_and_add_lun+0x0/0x9b4) from [<c01e2b90>] (__scsi_add_device+0xe0/0xec)
[ 18.367673] [<c01e2ab0>] (__scsi_add_device+0x0/0xec) from [<c01f6ed0>] (ata_scsi_scan_host+0x11c/0x1a8)
[ 18.551514] r8:00000000 r7:dfbbc000 r6:dfbbd4e0 r5:00000000 r4:dfbbd7c0
[ 18.645649] [<c01f6db4>] (ata_scsi_scan_host+0x0/0x1a8) from [<c01f23d8>] (async_port_probe+0x5c/0x70)
[ 18.827011] [<c01f237c>] (async_port_probe+0x0/0x70) from [<c003b3a0>] (async_run_entry_fn+0x48/0x190)
[ 19.011026] r6:df80a600 r5:dfb885b0 r4:c04c387c r3:00000000
[ 19.103713] [<c003b358>] (async_run_entry_fn+0x0/0x190) from [<c002dcb4>] (process_one_work+0x1b0/0x448)
[ 19.290166] [<c002db04>] (process_one_work+0x0/0x448) from [<c002e35c>] (worker_thread+0x144/0x398)
[ 19.477411] [<c002e218>] (worker_thread+0x0/0x398) from [<c0034c10>] (kthread+0xac/0xb8)
[ 19.576370] [<c0034b64>] (kthread+0x0/0xb8) from [<c0009380>] (ret_from_fork+0x14/0x34)
[ 19.674443] r7:00000000 r6:00000000 r5:c0034b64 r4:df871e0c
[ 19.769753] Code: 11a03ca3 10232391 e1a00003 e89da800 (e7f001f2)
[ 19.864789] ---[ end trace a584b0efd136b16c ]---
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.12.0-rc6 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-openrd-los.git-1836ad9-dirty"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=19
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_MULTIPLATFORM is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_GPIO_PCA953X is not set
#
# Marvell Kirkwood Implementations
#
CONFIG_KIRKWOOD_LEGACY=y
# CONFIG_MACH_D2NET_V2 is not set
# CONFIG_MACH_NET2BIG_V2 is not set
# CONFIG_MACH_NET5BIG_V2 is not set
CONFIG_MACH_OPENRD=y
# CONFIG_MACH_OPENRD_BASE is not set
CONFIG_MACH_OPENRD_CLIENT=y
# CONFIG_MACH_OPENRD_ULTIMATE is not set
# CONFIG_MACH_RD88F6192_NAS is not set
# CONFIG_MACH_RD88F6281 is not set
# CONFIG_MACH_T5325 is not set
# CONFIG_MACH_TS219 is not set
# CONFIG_MACH_TS41X is not set
#
# Device tree entries
#
# CONFIG_ARCH_KIRKWOOD_DT is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_ORION=y
CONFIG_PLAT_ORION_LEGACY=y
#
# Processor Type
#
CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y
#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_KUSER_HELPERS=y
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
#
# Bus support
#
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
#
# PCI host controller drivers
#
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZBUD is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mtdparts=orion_nand:0x400000@0x100000(kernel),0x400000@0x500000(initramfs),0x1f700000@0x900000(scratch) coherent_pool=1M"
# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_CMDLINE_EXTEND=y
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#
CONFIG_MVEBU_MBUS=y
# CONFIG_ARM_CCI is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_PXA3xx is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=y
CONFIG_MVMDIO=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_SH_ETH is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_ORION=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_KIRKWOOD=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_ORION=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_MVSDIO=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MV=y
# CONFIG_RTC_DRV_MOXART is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_MV_XOR=y
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
CONFIG_FB_XGI=y
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_XILLYBUS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_COMMON_CLK_SI5351 is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_MMIO=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=7
# CONFIG_BOOT_PRINTK_DELAY is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
# CONFIG_DEBUG_UART_PL01X is not set
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xfed12000
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_MV_CESA=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_VIRTUALIZATION is not set
A.
On Thu, Oct 24, 2013 at 09:07:30PM +0100, Aaro Koskinen wrote:
> Hi,
Hello,
[adding Catalin and Simon]
> I was trying to debug kernel crashes on Marvell Kirkwood (openrd)
> when upgrading from GCC 4.7.3 -> GCC 4.8.2. So I enabled most of the
> kernel debug options. However, I noticed that already when compiled with
> GCC 4.7.3 kernel crashes consistently at boot when DEBUG_VM is enabled
> (without it there are no issues with 4.7.3). See below for the boot/crash
> log & kernel config.
Ok, but this doesn't seem to be related to GCC.
[...]
> [ 26.694345] ata2: link is slow to respond, please be patient (ready=0)
> [ 31.194346] ata2: SRST failed (errno=-16)
> [ 31.754426] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
> [ 31.834619] ata2.00: ATA-6: eSATA-2 WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
> [ 31.899627] ata2.00: 976773168 sectors, multi 0: LBA48
> [ 31.994458] ata2.00: configured for UDMA/133
> [ 32.075306] ------------[ cut here ]------------
> [ 32.136256] kernel BUG at mm/util.c:390!
> [ 32.195446] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
> [ 32.255893] Modules linked in:
> [ 32.313109] CPU: 0 PID: 12 Comm: kworker/u2:1 Not tainted 3.12.0-rc6-openrd-los.git-1836ad9-dirty #3
> [ 32.435821] Workqueue: events_unbound async_run_entry_fn
> [ 32.498701] task: df854700 ti: df8a8000 task.ti: df8a8000
> [ 32.561662] PC is at page_mapping+0x48/0x50
> [ 32.622764] LR is at flush_kernel_dcache_page+0x14/0x98
> [ 32.685421] pc : [<c00923c4>] lr : [<c0010dd8>] psr: 20000093
> [ 32.685421] sp : df8a99f8 ip : df8a9a08 fp : df8a9a04
> [ 32.812754] r10: 60000093 r9 : df8a9c24 r8 : 00000024
> [ 32.874269] r7 : 00000000 r6 : c0a3cd0c r5 : 00001000 r4 : c0e2732c
> [ 32.936395] r3 : 00000000 r2 : 00000080 r1 : 00000564 r0 : c0e2732c
> [ 32.996978] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> [ 33.059012] Control: 0005317f Table: 1a8dc000 DAC: 00000017
> [ 33.119473] Process kworker/u2:1 (pid: 12, stack limit = 0xdf8a81c0)
The BUG is because page_mapping is being given a slab page...
> [ 36.477203] Backtrace:
> [ 36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
> [ 36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
> [ 36.792813] r4:df8a9a64 r3:00000003
> [ 36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)
... assumedly for scatter/gather DMA. How is your block driver allocating
its buffers? If you're using the DMA API, I can't see how this would happen.
Will
Hi,
On Sat, Oct 26, 2013 at 03:36:17PM +0100, Will Deacon wrote:
> On Thu, Oct 24, 2013 at 09:07:30PM +0100, Aaro Koskinen wrote:
> > [ 26.694345] ata2: link is slow to respond, please be patient (ready=0)
> > [ 31.194346] ata2: SRST failed (errno=-16)
> > [ 31.754426] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
> > [ 31.834619] ata2.00: ATA-6: eSATA-2 WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
> > [ 31.899627] ata2.00: 976773168 sectors, multi 0: LBA48
> > [ 31.994458] ata2.00: configured for UDMA/133
> > [ 32.075306] ------------[ cut here ]------------
> > [ 32.136256] kernel BUG at mm/util.c:390!
> > [ 32.195446] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
> > [ 32.255893] Modules linked in:
> > [ 32.313109] CPU: 0 PID: 12 Comm: kworker/u2:1 Not tainted 3.12.0-rc6-openrd-los.git-1836ad9-dirty #3
> > [ 32.435821] Workqueue: events_unbound async_run_entry_fn
> > [ 32.498701] task: df854700 ti: df8a8000 task.ti: df8a8000
> > [ 32.561662] PC is at page_mapping+0x48/0x50
> > [ 32.622764] LR is at flush_kernel_dcache_page+0x14/0x98
> > [ 32.685421] pc : [<c00923c4>] lr : [<c0010dd8>] psr: 20000093
> > [ 32.685421] sp : df8a99f8 ip : df8a9a08 fp : df8a9a04
> > [ 32.812754] r10: 60000093 r9 : df8a9c24 r8 : 00000024
> > [ 32.874269] r7 : 00000000 r6 : c0a3cd0c r5 : 00001000 r4 : c0e2732c
> > [ 32.936395] r3 : 00000000 r2 : 00000080 r1 : 00000564 r0 : c0e2732c
> > [ 32.996978] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> > [ 33.059012] Control: 0005317f Table: 1a8dc000 DAC: 00000017
> > [ 33.119473] Process kworker/u2:1 (pid: 12, stack limit = 0xdf8a81c0)
>
> The BUG is because page_mapping is being given a slab page...
>
> > [ 36.477203] Backtrace:
> > [ 36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
> > [ 36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
> > [ 36.792813] r4:df8a9a64 r3:00000003
> > [ 36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)
>
> ... assumedly for scatter/gather DMA. How is your block driver allocating
> its buffers? If you're using the DMA API, I can't see how this would happen.
This is sata_mv driver. As far as I understand, it's using DMA API
(dma_pool_alloc() etc.).
I noticed that for some reason CMA has gotten disabled on my
.config. However, enabling both CMA and DMA_CMA will still trigger
this BUG...
A.
On Sat, 26 Oct 2013 15:36:17 +0100
Will Deacon <[email protected]> wrote:
> On Thu, Oct 24, 2013 at 09:07:30PM +0100, Aaro Koskinen wrote:
>
> > [ 36.477203] Backtrace:
> > [ 36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
> > [ 36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
> > [ 36.792813] r4:df8a9a64 r3:00000003
> > [ 36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)
>
> ... assumedly for scatter/gather DMA. How is your block driver allocating
> its buffers? If you're using the DMA API, I can't see how this would happen.
Lots of SCSI commands(inquiry, ...) pass kmalloc buffer to block layer,
then the sg buffer copy helpers and flush_kernel_dcache_page() may see
slab page.
That has been here from commit b1adaf65ba03( [SCSI] block: add sg buffer copy
helper functions).
So how about letting below patch to workaround the issue?
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a685c8a..eea8806 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -577,7 +577,7 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
miter->__offset += miter->consumed;
miter->__remaining -= miter->consumed;
- if (miter->__flags & SG_MITER_TO_SG)
+ if ((miter->__flags & SG_MITER_TO_SG) && !PageSlab(page))
flush_kernel_dcache_page(miter->page);
if (miter->__flags & SG_MITER_ATOMIC) {
Thanks,
--
Ming Lei
Hi,
On Sun, Oct 27, 2013 at 07:51:15PM +0800, Ming Lei wrote:
> On Sat, 26 Oct 2013 15:36:17 +0100
> Will Deacon <[email protected]> wrote:
>
> > On Thu, Oct 24, 2013 at 09:07:30PM +0100, Aaro Koskinen wrote:
> >
> > > [ 36.477203] Backtrace:
> > > [ 36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
> > > [ 36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
> > > [ 36.792813] r4:df8a9a64 r3:00000003
> > > [ 36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)
> >
> > ... assumedly for scatter/gather DMA. How is your block driver allocating
> > its buffers? If you're using the DMA API, I can't see how this would happen.
>
> Lots of SCSI commands(inquiry, ...) pass kmalloc buffer to block layer,
> then the sg buffer copy helpers and flush_kernel_dcache_page() may see
> slab page.
>
> That has been here from commit b1adaf65ba03( [SCSI] block: add sg buffer copy
> helper functions).
On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
started to appear with the following commit (bisected):
commit 1bc39742aab09248169ef9d3727c9def3528b3f3
Author: Simon Baatz <[email protected]>
Date: Mon Jun 10 21:10:12 2013 +0100
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
A.
On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
>
> On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
> started to appear with the following commit (bisected):
>
> commit 1bc39742aab09248169ef9d3727c9def3528b3f3
> Author: Simon Baatz <[email protected]>
> Date: Mon Jun 10 21:10:12 2013 +0100
>
> ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
The above commit only starts to implement the helper on ARM,
but according to Documentation/cachetlb.txt, looks caller of
flush_kernel_dcache_page() should make sure the passed
'page' is a user space page.
Thanks,
--
Ming Lei
On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
> On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
> >
> > On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
> > started to appear with the following commit (bisected):
> >
> > commit 1bc39742aab09248169ef9d3727c9def3528b3f3
> > Author: Simon Baatz <[email protected]>
> > Date: Mon Jun 10 21:10:12 2013 +0100
> >
> > ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
>
> The above commit only starts to implement the helper on ARM,
> but according to Documentation/cachetlb.txt, looks caller of
> flush_kernel_dcache_page() should make sure the passed
> 'page' is a user space page.
I don't think PageSlab() is the right test tho. Wouldn't testing
against user_addr_max() make more sense?
Thanks.
--
tejun
On Sun, Oct 27, 2013 at 09:42:57AM -0400, Tejun Heo wrote:
> On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
> > On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
> > >
> > > On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
> > > started to appear with the following commit (bisected):
> > >
> > > commit 1bc39742aab09248169ef9d3727c9def3528b3f3
> > > Author: Simon Baatz <[email protected]>
> > > Date: Mon Jun 10 21:10:12 2013 +0100
> > >
> > > ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
> >
> > The above commit only starts to implement the helper on ARM,
> > but according to Documentation/cachetlb.txt, looks caller of
> > flush_kernel_dcache_page() should make sure the passed
> > 'page' is a user space page.
>
> I don't think PageSlab() is the right test tho. Wouldn't testing
> against user_addr_max() make more sense?
How does that help for a function passed a struct page pointer?
On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
> On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
> >
> > On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
> > started to appear with the following commit (bisected):
> >
> > commit 1bc39742aab09248169ef9d3727c9def3528b3f3
> > Author: Simon Baatz <[email protected]>
> > Date: Mon Jun 10 21:10:12 2013 +0100
> >
> > ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
>
> The above commit only starts to implement the helper on ARM,
> but according to Documentation/cachetlb.txt, looks caller of
> flush_kernel_dcache_page() should make sure the passed
> 'page' is a user space page.
I think your terminology is off. flush_kernel_dcache_page() is passed a
struct page. These exist for every physical RAM page in the system which
is under the control of the kernel. There's no such thing as a "user
space page" - pages are shared from kernel space into userspace.
Secondly, flush_kernel_dcache_page() gets used on such pages whether or
not they're already mapped into userspace (normally they won't be if this
is the first read of the page.) This function is only expected to deal
with kernel-side addresses of the page, ensuring that data in the page
is visible to the underlying memory.
The last thing to realise is that we already have a function which deals
with the presence of userspace mappings. It's called flush_dcache_page().
If flush_kernel_dcache_page() had to make that decision, then there's no
point in flush_kernel_dcache_page() existing - we might as well just call
flush_dcache_page() directly.
So...
flush_kernel_dcache_page() is expected to take a struct page pointer.
This struct page pointer is part of the kernel's array of struct pages
which identifies every single physical page under the control of the
kernel.
Arguably, it should not crash if passed a page which has been allocated
to the slab cache; as this is not a page cache page,
flush_kernel_dcache_page() should merely ignore the call to it and
simply return on these. So this makes total sense:
arch/arm/mm/flush.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 6d5ba9afb16a..eebb275a67fb 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -316,6 +316,10 @@ EXPORT_SYMBOL(flush_dcache_page);
*/
void flush_kernel_dcache_page(struct page *page)
{
+ /* Ignore slab pages */
+ if (PageSlab(page))
+ return;
+
if (cache_is_vivt() || cache_is_vipt_aliasing()) {
struct address_space *mapping;
Hi Russell,
On Sun, Oct 27, 2013 at 01:53:44PM +0000, Russell King - ARM Linux wrote:
> On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
> > On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
> > >
> So...
>
> flush_kernel_dcache_page() is expected to take a struct page pointer.
> This struct page pointer is part of the kernel's array of struct pages
> which identifies every single physical page under the control of the
> kernel.
>
> Arguably, it should not crash if passed a page which has been allocated
> to the slab cache; as this is not a page cache page,
> flush_kernel_dcache_page() should merely ignore the call to it and
> simply return on these. So this makes total sense:
In this respect, flush_kernel_dcache_page() is following
flush_dcache_page(). For example in crypto/scatterwalk.c:
static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
unsigned int more)
{
if (out) {
struct page *page;
page = sg_page(walk->sg) + ((walk->offset - 1) >>
PAGE_SHIFT);
if (!PageSlab(page))
flush_dcache_page(page);
}
...
or in drivers/ata/libata-sff.c:
...
if (!do_write && !PageSlab(page))
flush_dcache_page(page);
...
(Probably, both cases should have used
flush_kernel_dcache_page() in the first place). If we say that this
check belongs in flush_kernel_dcache_page() we should also put it
into flush_dcache_page(), no?
- Simon
On Sun, Oct 27, 2013 at 9:53 PM, Russell King - ARM Linux
<[email protected]> wrote:
> On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
>> On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
>> >
>> > On ARM v3.9 or older kernels do not trigger this BUG, at seems it only
>> > started to appear with the following commit (bisected):
>> >
>> > commit 1bc39742aab09248169ef9d3727c9def3528b3f3
>> > Author: Simon Baatz <[email protected]>
>> > Date: Mon Jun 10 21:10:12 2013 +0100
>> >
>> > ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
>>
>> The above commit only starts to implement the helper on ARM,
>> but according to Documentation/cachetlb.txt, looks caller of
>> flush_kernel_dcache_page() should make sure the passed
>> 'page' is a user space page.
>
> I think your terminology is off. flush_kernel_dcache_page() is passed a
> struct page. These exist for every physical RAM page in the system which
> is under the control of the kernel. There's no such thing as a "user
> space page" - pages are shared from kernel space into userspace.
It isn't my terminology, and it is from Documentation/cachetlb.txt, :-)
But I admit it isn't good to call it as user space page.
Also pages which belong to slab shouldn't be mapped to user space.
>
> Secondly, flush_kernel_dcache_page() gets used on such pages whether or
> not they're already mapped into userspace (normally they won't be if this
> is the first read of the page.) This function is only expected to deal
> with kernel-side addresses of the page, ensuring that data in the page
> is visible to the underlying memory.
>
> The last thing to realise is that we already have a function which deals
> with the presence of userspace mappings. It's called flush_dcache_page().
> If flush_kernel_dcache_page() had to make that decision, then there's no
> point in flush_kernel_dcache_page() existing - we might as well just call
> flush_dcache_page() directly.
>
> So...
>
> flush_kernel_dcache_page() is expected to take a struct page pointer.
> This struct page pointer is part of the kernel's array of struct pages
> which identifies every single physical page under the control of the
> kernel.
>
> Arguably, it should not crash if passed a page which has been allocated
> to the slab cache; as this is not a page cache page,
> flush_kernel_dcache_page() should merely ignore the call to it and
> simply return on these. So this makes total sense:
I think callers of flush_kernel_dcache_page() should make sure that,
not just arm implements the helper, so I am wondering if arch code
needs the test.
>
> arch/arm/mm/flush.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
> index 6d5ba9afb16a..eebb275a67fb 100644
> --- a/arch/arm/mm/flush.c
> +++ b/arch/arm/mm/flush.c
> @@ -316,6 +316,10 @@ EXPORT_SYMBOL(flush_dcache_page);
> */
> void flush_kernel_dcache_page(struct page *page)
> {
> + /* Ignore slab pages */
> + if (PageSlab(page))
> + return;
> +
> if (cache_is_vivt() || cache_is_vipt_aliasing()) {
> struct address_space *mapping;
>
Thanks,
--
Ming Lei
On Sun, Oct 27, 2013 at 02:18:17PM +0000, Simon Baatz wrote:
> On Sun, Oct 27, 2013 at 01:53:44PM +0000, Russell King - ARM Linux wrote:
> > On Sun, Oct 27, 2013 at 09:16:53PM +0800, Ming Lei wrote:
> > > On Sun, Oct 27, 2013 at 8:50 PM, Aaro Koskinen <[email protected]> wrote:
> > > >
> > So...
> >
> > flush_kernel_dcache_page() is expected to take a struct page pointer.
> > This struct page pointer is part of the kernel's array of struct pages
> > which identifies every single physical page under the control of the
> > kernel.
> >
> > Arguably, it should not crash if passed a page which has been allocated
> > to the slab cache; as this is not a page cache page,
> > flush_kernel_dcache_page() should merely ignore the call to it and
> > simply return on these. So this makes total sense:
>
> In this respect, flush_kernel_dcache_page() is following
> flush_dcache_page(). For example in crypto/scatterwalk.c:
>
> static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
> unsigned int more)
> {
> if (out) {
> struct page *page;
>
> page = sg_page(walk->sg) + ((walk->offset - 1) >>
> PAGE_SHIFT);
> if (!PageSlab(page))
> flush_dcache_page(page);
> }
> ...
>
>
> or in drivers/ata/libata-sff.c:
>
> ...
> if (!do_write && !PageSlab(page))
> flush_dcache_page(page);
> ...
>
>
> (Probably, both cases should have used
> flush_kernel_dcache_page() in the first place). If we say that this
> check belongs in flush_kernel_dcache_page() we should also put it
> into flush_dcache_page(), no?
According to cachetlb.txt, flush_dcache_page() is only called on page
cache pages, so this excludes the PageSlab() check.
For flush_kernel_dcache_page() it says "when the kernel modifies and
user page" and my reading is that this applies to either page cache
or anonymous pages but not slab pages, so I would add such check to the
caller.
--
Catalin
On Sun, Oct 27, 2013 at 07:51:15PM +0800, Ming Lei wrote:
> diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> index a685c8a..eea8806 100644
> --- a/lib/scatterlist.c
> +++ b/lib/scatterlist.c
> @@ -577,7 +577,7 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
> miter->__offset += miter->consumed;
> miter->__remaining -= miter->consumed;
>
> - if (miter->__flags & SG_MITER_TO_SG)
> + if ((miter->__flags & SG_MITER_TO_SG) && !PageSlab(page))
This is what I was going to propose, but I would have used
!PageSlab(miter->page) ;-)
> flush_kernel_dcache_page(miter->page);
With this, a kernel with DEBUG_VM now boots on Kirkwood.
- Simon
On Mon, Oct 28, 2013 at 10:13 PM, Simon Baatz <[email protected]> wrote:
> On Sun, Oct 27, 2013 at 07:51:15PM +0800, Ming Lei wrote:
>> diff --git a/lib/scatterlist.c b/lib/scatterlist.c
>> index a685c8a..eea8806 100644
>> --- a/lib/scatterlist.c
>> +++ b/lib/scatterlist.c
>> @@ -577,7 +577,7 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
>> miter->__offset += miter->consumed;
>> miter->__remaining -= miter->consumed;
>>
>> - if (miter->__flags & SG_MITER_TO_SG)
>> + if ((miter->__flags & SG_MITER_TO_SG) && !PageSlab(page))
>
> This is what I was going to propose, but I would have used
> !PageSlab(miter->page) ;-)
OK, I will send a formal one later, thank you for pointing out the above, :-)
>
>> flush_kernel_dcache_page(miter->page);
>
> With this, a kernel with DEBUG_VM now boots on Kirkwood.
Thanks,
--
Ming Lei