This patch set contains various extensions to the tda998x driver:
- simplify the i2c read/write
- code cleanup and fix some small errors
- use HDMI constants
- don't read write-only registers
- add DT support
- use irq for connection status and EDID read
- get a better status of the HDMI connector
- use the tda998x video format when cea mode
- add tda998x codec interface
- v2
- decompose patches with different topics
- fix some bad i2c register values
- add audio codec interface
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
On Thu, Jan 09, 2014 at 11:56:51AM +0100, Jean-Francois Moine wrote:
> This patch set contains various extensions to the tda998x driver:
>
> - simplify the i2c read/write
> - code cleanup and fix some small errors
> - use HDMI constants
> - don't read write-only registers
> - add DT support
> - use irq for connection status and EDID read
> - get a better status of the HDMI connector
> - use the tda998x video format when cea mode
> - add tda998x codec interface
>
> - v2
> - decompose patches with different topics
> - fix some bad i2c register values
> - add audio codec interface
>
Next time you post patches, please ensure that each patch is a reply
to your series covering message, so that they can be easily threaded
together. It's a pain to have to search around for all the individual
patches amongst other people's traffic.
Thanks.
--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".