2014-01-19 19:03:13

by Jean-Francois Moine

[permalink] [raw]
Subject: [PATCH v3 19/24] drm/i2c: tda998x: use global constants

Signed-off-by: Jean-Francois Moine <[email protected]>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index ce832f0..324dc13 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -132,6 +132,8 @@ struct tda998x_priv {
# define VIP_CNTRL_5_CKCASE (1 << 0)
# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1)
#define REG_MUX_AP REG(0x00, 0x26) /* read/write */
+# define MUX_AP_SELECT_I2S 0x64
+# define MUX_AP_SELECT_SPDIF 0x40
#define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */
#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */
# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0)
@@ -209,10 +211,11 @@ struct tda998x_priv {
#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
# define I2S_FORMAT(x) (((x) & 3) << 0)
#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
-# define AIP_CLKSEL_FS(x) (((x) & 3) << 0)
-# define AIP_CLKSEL_CLK_POL(x) (((x) & 1) << 2)
-# define AIP_CLKSEL_AIP(x) (((x) & 7) << 3)
-
+# define AIP_CLKSEL_AIP_SPDIF (0 << 3)
+# define AIP_CLKSEL_AIP_I2S (1 << 3)
+# define AIP_CLKSEL_FS_ACLK (0 << 0)
+# define AIP_CLKSEL_FS_MCLK (1 << 0)
+# define AIP_CLKSEL_FS_FS64SPDIF (2 << 0)

/* Page 02h: PLL settings */
#define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */
@@ -677,20 +680,18 @@ tda998x_configure_audio(struct tda998x_priv *priv,
/* Set audio input source */
switch (priv->audio_format) {
case AFMT_SPDIF:
- reg_write(priv, REG_MUX_AP, 0x40);
- clksel_aip = AIP_CLKSEL_AIP(0);
- /* FS64SPDIF */
- clksel_fs = AIP_CLKSEL_FS(2);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
+ clksel_aip = AIP_CLKSEL_AIP_SPDIF;
+ clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
cts_n = CTS_N_M(3) | CTS_N_K(3);
aclk = 0; /* no clock */
ca_i2s = 0;
break;

case AFMT_I2S:
- reg_write(priv, REG_MUX_AP, 0x64);
- clksel_aip = AIP_CLKSEL_AIP(1);
- /* ACLK */
- clksel_fs = AIP_CLKSEL_FS(0);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
+ clksel_aip = AIP_CLKSEL_AIP_I2S;
+ clksel_fs = AIP_CLKSEL_FS_ACLK;
cts_n = CTS_N_M(3) | CTS_N_K(3);
aclk = 1; /* clock enable */
ca_i2s = CA_I2S_CA_I2S(0);
--
1.8.5.3


2014-01-22 23:29:33

by Russell King - ARM Linux

[permalink] [raw]
Subject: Re: [PATCH v3 19/24] drm/i2c: tda998x: use global constants

On Sun, Jan 19, 2014 at 07:58:45PM +0100, Jean-Francois Moine wrote:
> Signed-off-by: Jean-Francois Moine <[email protected]>

Might be worth also saying "and tidy up AIP_CLKSEL" since arguably they
were already using global constants. In any case, no one likes single
line patch descriptions. Always try to write something more about the
patch.

I've verified this via inspection, and tested it.

Tested-by: Russell King <[email protected]>

--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".