The S/PDIF input asks for a greater audio clock divider.
Signed-off-by: Jean-Francois Moine <[email protected]>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 0716a75..06c484d 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -707,6 +707,10 @@ tda998x_configure_audio(struct tda998x_priv *priv,
reg_write(priv, REG_CTS_N, cts_n);
reg_write(priv, REG_ENA_ACLK, aclk);
+ /* S/PDIF asks for a large divider */
+ if (priv->audio_format == AFMT_SPDIF)
+ adiv = AUDIO_DIV_SERCLK_32;
+
/*
* Audio input somehow depends on HDMI line rate which is
* related to pixclk. Testing showed that modes with pixclk
@@ -714,7 +718,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
* There is no detailed info in the datasheet, so we just
* assume 100MHz requires larger divider.
*/
- if (mode->clock > 100000)
+ else if (mode->clock > 100000)
adiv = AUDIO_DIV_SERCLK_16;
else
adiv = AUDIO_DIV_SERCLK_8;
--
1.8.5.3