Hi Steven,
This patch set introduces the new I/F "nr_saved_cmdlines" for increasing
the number of saved cmdlines. Current saved_cmdlines can store just 128 command
names and PIDs, but process names are often lost like <...> when we read trace
data. If the process exists, we can get the name by using ps command. However,
if the process already has not existed, we cannot get the name.
To solve this issue, we introduce the new I/F "nr_saved_cmdlines" to expand
the max number of saved command line names. This I/F is very simple.
If we write a number to nr_saved_cmdlines, the number of command name will be
stored. And, if we read the I/F, we can get current maximum number of command
name. The default number is 128 which is current default number, so this patch
does not change the usage of memory for saved_cmdlines when we boot kernel.
Thanks!
Note: This patch set was rebased for current tip ftrace-core kernel.
---
Yoshihiro YUNOMAE (2):
ftrace: Make saved_cmdlines use seq_read
ftrace: Introduce nr_saved_cmdlines I/F
kernel/trace/trace.c | 296 +++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 241 insertions(+), 55 deletions(-)
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: [email protected]
Introduce nr_saved_cmdlines I/F for changing the number of pid-comm list.
saved_cmdlines can store 128 command names using SAVED_CMDLINES now, but
'no-existing processes' names are often lost in saved_cmdlines when we
read trace data. So, by introducing nr_saved_cmdlines I/F, the rule storing
128 command names is changed to the command numbers defined users.
When we write a value to nr_saved_cmdlines, the number of the value will
be stored in pid-comm list:
# echo 1024 > /sys/kernel/debug/tracing/nr_saved_cmdlines
Here, 1024 command names are stored. The default number is 128 and the maximum
number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
want to avoid to lose command names, we need to set 32768 to nr_saved_cmdlines.
We can read the maximum number of the list:
# cat /sys/kernel/debug/tracing/nr_saved_cmdlines
128
Signed-off-by: Yoshihiro YUNOMAE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
---
kernel/trace/trace.c | 211 +++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 189 insertions(+), 22 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index f930f4d..e7d292a 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1294,22 +1294,96 @@ void tracing_reset_all_online_cpus(void)
}
}
-#define SAVED_CMDLINES 128
+#define SAVED_CMDLINES_DEFAULT 128
#define NO_CMDLINE_MAP UINT_MAX
-static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1];
-static unsigned map_cmdline_to_pid[SAVED_CMDLINES];
-static char saved_cmdlines[SAVED_CMDLINES][TASK_COMM_LEN];
-static int cmdline_idx;
static arch_spinlock_t trace_cmdline_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+struct saved_cmdlines_buffer {
+ unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1];
+ unsigned *map_cmdline_to_pid;
+ unsigned cmdline_num;
+ int cmdline_idx;
+ char *saved_cmdlines;
+};
+static struct saved_cmdlines_buffer *savedcmd;
/* temporary disable recording */
static atomic_t trace_record_cmdline_disabled __read_mostly;
-static void trace_init_cmdlines(void)
+static inline char *get_cmdline(int idx)
+{
+ return &savedcmd->saved_cmdlines[idx*TASK_COMM_LEN];
+}
+
+static inline void set_cmdline(int idx, char *cmdline)
+{
+ memcpy(get_cmdline(idx), cmdline, TASK_COMM_LEN);
+}
+
+static int allocate_cmdlines_buffer(unsigned int val,
+ struct saved_cmdlines_buffer *s)
{
- memset(&map_pid_to_cmdline, NO_CMDLINE_MAP, sizeof(map_pid_to_cmdline));
- memset(&map_cmdline_to_pid, NO_CMDLINE_MAP, sizeof(map_cmdline_to_pid));
- cmdline_idx = 0;
+ s->map_cmdline_to_pid = kmalloc(val*sizeof(unsigned), GFP_KERNEL);
+ if (!s->map_cmdline_to_pid)
+ goto out;
+
+ s->saved_cmdlines = kmalloc(val*TASK_COMM_LEN, GFP_KERNEL);
+ if (!s->saved_cmdlines)
+ goto out_free_map_cmdline_to_pid;
+
+ return 0;
+
+out_free_map_cmdline_to_pid:
+ kfree(s->map_cmdline_to_pid);
+out:
+ return -ENOMEM;
+}
+
+static void trace_init_cmdlines_buffer(unsigned int val,
+ struct saved_cmdlines_buffer *s)
+{
+ s->cmdline_idx = 0;
+ s->cmdline_num = val;
+ memset(&s->map_pid_to_cmdline, NO_CMDLINE_MAP,
+ sizeof(s->map_pid_to_cmdline));
+ memset(s->map_cmdline_to_pid, NO_CMDLINE_MAP, val*sizeof(unsigned));
+}
+
+static int trace_create_savedcmd(void)
+{
+ int ret;
+
+ savedcmd = kmalloc(sizeof(struct saved_cmdlines_buffer), GFP_KERNEL);
+ if (!savedcmd)
+ goto out;
+
+ ret = allocate_cmdlines_buffer(SAVED_CMDLINES_DEFAULT, savedcmd);
+ if (ret < 0)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ kfree(savedcmd);
+out:
+ return -ENOMEM;
+}
+
+static void trace_init_savedcmd(void)
+{
+ trace_init_cmdlines_buffer(SAVED_CMDLINES_DEFAULT, savedcmd);
+}
+
+static int trace_create_and_init_savedcmd(void)
+{
+ int ret;
+
+ ret = trace_create_savedcmd();
+ if (ret < 0)
+ return ret;
+
+ trace_init_savedcmd();
+
+ return 0;
}
int is_tracing_stopped(void)
@@ -1466,9 +1540,9 @@ static void trace_save_cmdline(struct task_struct *tsk)
if (!arch_spin_trylock(&trace_cmdline_lock))
return;
- idx = map_pid_to_cmdline[tsk->pid];
+ idx = savedcmd->map_pid_to_cmdline[tsk->pid];
if (idx == NO_CMDLINE_MAP) {
- idx = (cmdline_idx + 1) % SAVED_CMDLINES;
+ idx = (savedcmd->cmdline_idx + 1) % savedcmd->cmdline_num;
/*
* Check whether the cmdline buffer at idx has a pid
@@ -1476,17 +1550,17 @@ static void trace_save_cmdline(struct task_struct *tsk)
* need to clear the map_pid_to_cmdline. Otherwise we
* would read the new comm for the old pid.
*/
- pid = map_cmdline_to_pid[idx];
+ pid = savedcmd->map_cmdline_to_pid[idx];
if (pid != NO_CMDLINE_MAP)
- map_pid_to_cmdline[pid] = NO_CMDLINE_MAP;
+ savedcmd->map_pid_to_cmdline[pid] = NO_CMDLINE_MAP;
- map_cmdline_to_pid[idx] = tsk->pid;
- map_pid_to_cmdline[tsk->pid] = idx;
+ savedcmd->map_cmdline_to_pid[idx] = tsk->pid;
+ savedcmd->map_pid_to_cmdline[tsk->pid] = idx;
- cmdline_idx = idx;
+ savedcmd->cmdline_idx = idx;
}
- memcpy(&saved_cmdlines[idx], tsk->comm, TASK_COMM_LEN);
+ set_cmdline(idx, tsk->comm);
arch_spin_unlock(&trace_cmdline_lock);
}
@@ -1512,9 +1586,9 @@ void trace_find_cmdline(int pid, char comm[])
preempt_disable();
arch_spin_lock(&trace_cmdline_lock);
- map = map_pid_to_cmdline[pid];
+ map = savedcmd->map_pid_to_cmdline[pid];
if (map != NO_CMDLINE_MAP)
- strcpy(comm, saved_cmdlines[map]);
+ strcpy(comm, get_cmdline(map));
else
strcpy(comm, "<...>");
@@ -3565,6 +3639,7 @@ static const char readme_msg[] =
" trace_options\t\t- Set format or modify how tracing happens\n"
"\t\t\t Disable an option by adding a suffix 'no' to the\n"
"\t\t\t option name\n"
+ " nr_saved_cmdlines\t- echo command number in here to store comm-pid list\n"
#ifdef CONFIG_DYNAMIC_FTRACE
"\n available_filter_functions - list of functions that can be filtered on\n"
" set_ftrace_filter\t- echo function name in here to only trace these\n"
@@ -3685,7 +3760,8 @@ static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
(*pos)++;
- for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
+ for (; ptr < &savedcmd->map_cmdline_to_pid[savedcmd->cmdline_num];
+ ptr++) {
if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
continue;
@@ -3700,7 +3776,7 @@ static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
void *v;
loff_t l = 0;
- v = &map_cmdline_to_pid[0];
+ v = &savedcmd->map_cmdline_to_pid[0];
while (l <= *pos) {
v = saved_cmdlines_next(m, v, &l);
if (!v)
@@ -3747,6 +3823,88 @@ static const struct file_operations tracing_saved_cmdlines_fops = {
};
static ssize_t
+tracing_nr_saved_cmdlines_read(struct file *filp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char buf[64];
+ int r;
+
+ arch_spin_lock(&trace_cmdline_lock);
+ r = sprintf(buf, "%u\n", savedcmd->cmdline_num);
+ arch_spin_unlock(&trace_cmdline_lock);
+
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
+}
+
+static void free_saved_cmdlines_buffer(struct saved_cmdlines_buffer *s)
+{
+ kfree(s->saved_cmdlines);
+ kfree(s->map_cmdline_to_pid);
+ kfree(s);
+}
+
+static int tracing_resize_saved_cmdlines(unsigned int val)
+{
+ struct saved_cmdlines_buffer *s, *savedcmd_temp;
+ int ret;
+
+ s = kmalloc(sizeof(struct saved_cmdlines_buffer), GFP_KERNEL);
+ if (!s)
+ goto out;
+
+ ret = allocate_cmdlines_buffer(val, s);
+ if (ret < 0)
+ goto out_free;
+
+ trace_init_cmdlines_buffer(val, s);
+
+ savedcmd_temp = savedcmd;
+
+ arch_spin_lock(&trace_cmdline_lock);
+ savedcmd = s;
+ arch_spin_unlock(&trace_cmdline_lock);
+
+ free_saved_cmdlines_buffer(savedcmd_temp);
+
+ return 0;
+
+out_free:
+ kfree(s);
+out:
+ return -ENOMEM;
+}
+
+static ssize_t
+tracing_nr_saved_cmdlines_write(struct file *filp, const char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
+ if (ret)
+ return ret;
+
+ /* must have at least 1 entry or less than PID_MAX_DEFAULT */
+ if (!val || val > PID_MAX_DEFAULT)
+ return -EINVAL;
+
+ ret = tracing_resize_saved_cmdlines((unsigned int)val);
+ if (ret < 0)
+ return ret;
+
+ *ppos += cnt;
+
+ return cnt;
+}
+
+static const struct file_operations tracing_nr_saved_cmdlines_fops = {
+ .open = tracing_open_generic,
+ .read = tracing_nr_saved_cmdlines_read,
+ .write = tracing_nr_saved_cmdlines_write,
+};
+
+static ssize_t
tracing_set_trace_read(struct file *filp, char __user *ubuf,
size_t cnt, loff_t *ppos)
{
@@ -6349,6 +6507,9 @@ static __init int tracer_init_debugfs(void)
trace_create_file("saved_cmdlines", 0444, d_tracer,
NULL, &tracing_saved_cmdlines_fops);
+ trace_create_file("nr_saved_cmdlines", 0644, d_tracer,
+ NULL, &tracing_nr_saved_cmdlines_fops);
+
#ifdef CONFIG_DYNAMIC_FTRACE
trace_create_file("dyn_ftrace_total_info", 0444, d_tracer,
&ftrace_update_tot_cnt, &tracing_dyn_info_fops);
@@ -6590,7 +6751,8 @@ __init static int tracer_alloc_buffers(void)
if (global_trace.buffer_disabled)
tracing_off();
- trace_init_cmdlines();
+ if (trace_create_and_init_savedcmd() < 0)
+ goto out_free_trace_buffers;
/*
* register_tracer() might reference current_trace, so it
@@ -6626,6 +6788,11 @@ __init static int tracer_alloc_buffers(void)
return 0;
+out_free_trace_buffers:
+ ring_buffer_free(global_trace.trace_buffer.buffer);
+#ifdef CONFIG_TRACER_MAX_TRACE
+ ring_buffer_free(global_trace.max_buffer.buffer);
+#endif
out_free_cpumask:
free_percpu(global_trace.trace_buffer.data);
#ifdef CONFIG_TRACER_MAX_TRACE
Current tracing_saved_cmdlines_read() implementation is naive;
simply allocate a big buffer, construct output data on the
buffer for each read operation, and then copy a portion of
the buffer to the user space buffer. This can cause a couple of
issues such as a slow memory allocation, high cpu usage, and a
corruption of the output data.
To address these issues, make saved_cmdlines use seq_read.
Signed-off-by: Hidehiro Kawai <[email protected]>
Signed-off-by: Yoshihiro YUNOMAE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
---
kernel/trace/trace.c | 89 ++++++++++++++++++++++++++++++--------------------
1 file changed, 54 insertions(+), 35 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 6a9212d..f930f4d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3676,55 +3676,74 @@ static const struct file_operations tracing_readme_fops = {
.llseek = generic_file_llseek,
};
-static ssize_t
-tracing_saved_cmdlines_read(struct file *file, char __user *ubuf,
- size_t cnt, loff_t *ppos)
+static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
{
- char *buf_comm;
- char *file_buf;
- char *buf;
- int len = 0;
- int pid;
- int i;
+ unsigned int *ptr = v;
- file_buf = kmalloc(SAVED_CMDLINES*(16+TASK_COMM_LEN), GFP_KERNEL);
- if (!file_buf)
- return -ENOMEM;
+ if (*pos || m->count)
+ ptr++;
- buf_comm = kmalloc(TASK_COMM_LEN, GFP_KERNEL);
- if (!buf_comm) {
- kfree(file_buf);
- return -ENOMEM;
- }
+ (*pos)++;
+
+ for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
+ if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
+ continue;
- buf = file_buf;
+ return ptr;
+ }
- for (i = 0; i < SAVED_CMDLINES; i++) {
- int r;
+ return NULL;
+}
- pid = map_cmdline_to_pid[i];
- if (pid == -1 || pid == NO_CMDLINE_MAP)
- continue;
+static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
+{
+ void *v;
+ loff_t l = 0;
- trace_find_cmdline(pid, buf_comm);
- r = sprintf(buf, "%d %s\n", pid, buf_comm);
- buf += r;
- len += r;
+ v = &map_cmdline_to_pid[0];
+ while (l <= *pos) {
+ v = saved_cmdlines_next(m, v, &l);
+ if (!v)
+ return NULL;
}
- len = simple_read_from_buffer(ubuf, cnt, ppos,
- file_buf, len);
+ return v;
+}
- kfree(file_buf);
- kfree(buf_comm);
+static void saved_cmdlines_stop(struct seq_file *m, void *v)
+{
+}
- return len;
+static int saved_cmdlines_show(struct seq_file *m, void *v)
+{
+ char buf[TASK_COMM_LEN];
+ unsigned int *pid = v;
+
+ trace_find_cmdline(*pid, buf);
+ seq_printf(m, "%d %s\n", *pid, buf);
+ return 0;
+}
+
+static const struct seq_operations tracing_saved_cmdlines_seq_ops = {
+ .start = saved_cmdlines_start,
+ .next = saved_cmdlines_next,
+ .stop = saved_cmdlines_stop,
+ .show = saved_cmdlines_show,
+};
+
+static int tracing_saved_cmdlines_open(struct inode *inode, struct file *filp)
+{
+ if (tracing_disabled)
+ return -ENODEV;
+
+ return seq_open(filp, &tracing_saved_cmdlines_seq_ops);
}
static const struct file_operations tracing_saved_cmdlines_fops = {
- .open = tracing_open_generic,
- .read = tracing_saved_cmdlines_read,
- .llseek = generic_file_llseek,
+ .open = tracing_saved_cmdlines_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
};
static ssize_t
Hi Yoshihiro,
On Thu, 13 Feb 2014 10:28:58 +0900, Yoshihiro YUNOMAE wrote:
> Introduce nr_saved_cmdlines I/F for changing the number of pid-comm list.
> saved_cmdlines can store 128 command names using SAVED_CMDLINES now, but
> 'no-existing processes' names are often lost in saved_cmdlines when we
> read trace data. So, by introducing nr_saved_cmdlines I/F, the rule storing
> 128 command names is changed to the command numbers defined users.
>
> When we write a value to nr_saved_cmdlines, the number of the value will
> be stored in pid-comm list:
>
> # echo 1024 > /sys/kernel/debug/tracing/nr_saved_cmdlines
>
> Here, 1024 command names are stored. The default number is 128 and the maximum
> number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
> want to avoid to lose command names, we need to set 32768 to nr_saved_cmdlines.
>
> We can read the maximum number of the list:
>
> # cat /sys/kernel/debug/tracing/nr_saved_cmdlines
> 128
[SNIP]
> @@ -3685,7 +3760,8 @@ static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
>
> (*pos)++;
>
> - for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
> + for (; ptr < &savedcmd->map_cmdline_to_pid[savedcmd->cmdline_num];
> + ptr++) {
> if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
> continue;
>
> @@ -3700,7 +3776,7 @@ static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
> void *v;
> loff_t l = 0;
>
> - v = &map_cmdline_to_pid[0];
> + v = &savedcmd->map_cmdline_to_pid[0];
> while (l <= *pos) {
> v = saved_cmdlines_next(m, v, &l);
> if (!v)
Are you accessing the savecmd without trace_cmdline_lock?
Thanks,
Namhyung
Hi Namhyung,
(2014/02/14 13:50), Namhyung Kim wrote:
> Hi Yoshihiro,
>
> On Thu, 13 Feb 2014 10:28:58 +0900, Yoshihiro YUNOMAE wrote:
>> Introduce nr_saved_cmdlines I/F for changing the number of pid-comm list.
>> saved_cmdlines can store 128 command names using SAVED_CMDLINES now, but
>> 'no-existing processes' names are often lost in saved_cmdlines when we
>> read trace data. So, by introducing nr_saved_cmdlines I/F, the rule storing
>> 128 command names is changed to the command numbers defined users.
>>
>> When we write a value to nr_saved_cmdlines, the number of the value will
>> be stored in pid-comm list:
>>
>> # echo 1024 > /sys/kernel/debug/tracing/nr_saved_cmdlines
>>
>> Here, 1024 command names are stored. The default number is 128 and the maximum
>> number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
>> want to avoid to lose command names, we need to set 32768 to nr_saved_cmdlines.
>>
>> We can read the maximum number of the list:
>>
>> # cat /sys/kernel/debug/tracing/nr_saved_cmdlines
>> 128
>
> [SNIP]
>> @@ -3685,7 +3760,8 @@ static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
>>
>> (*pos)++;
>>
>> - for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
>> + for (; ptr < &savedcmd->map_cmdline_to_pid[savedcmd->cmdline_num];
>> + ptr++) {
>> if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
>> continue;
>>
>> @@ -3700,7 +3776,7 @@ static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
>> void *v;
>> loff_t l = 0;
>>
>> - v = &map_cmdline_to_pid[0];
>> + v = &savedcmd->map_cmdline_to_pid[0];
>> while (l <= *pos) {
>> v = saved_cmdlines_next(m, v, &l);
>> if (!v)
>
> Are you accessing the savecmd without trace_cmdline_lock?
It does not need to get trace_cmdline_lock here.
The elements of map_pid_to_cmdline[] and saved_cmdlines[] are protected
by trace_cmdline_lock in trace_find_cmdline(), but on the other hand
map_cmdline_to_pid[] are not protected. There are no problems in
particular. This is because map_cmdline_to_pid[] always refers to a
valid process name or "<...>".
Note that we can always get process names by setting nr_saved_cmdlines
to maximum number if we want to avoid to get "<...>".
Thank you,
Yoshihiro YUNOMAE
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: [email protected]
Hi Yoshihiro,
On Mon, 17 Feb 2014 13:57:13 +0900, Yoshihiro YUNOMAE wrote:
> Hi Namhyung,
>
> (2014/02/14 13:50), Namhyung Kim wrote:
>> Hi Yoshihiro,
>>
>> On Thu, 13 Feb 2014 10:28:58 +0900, Yoshihiro YUNOMAE wrote:
>>> Introduce nr_saved_cmdlines I/F for changing the number of pid-comm list.
>>> saved_cmdlines can store 128 command names using SAVED_CMDLINES now, but
>>> 'no-existing processes' names are often lost in saved_cmdlines when we
>>> read trace data. So, by introducing nr_saved_cmdlines I/F, the rule storing
>>> 128 command names is changed to the command numbers defined users.
>>>
>>> When we write a value to nr_saved_cmdlines, the number of the value will
>>> be stored in pid-comm list:
>>>
>>> # echo 1024 > /sys/kernel/debug/tracing/nr_saved_cmdlines
>>>
>>> Here, 1024 command names are stored. The default number is 128 and the maximum
>>> number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
>>> want to avoid to lose command names, we need to set 32768 to nr_saved_cmdlines.
>>>
>>> We can read the maximum number of the list:
>>>
>>> # cat /sys/kernel/debug/tracing/nr_saved_cmdlines
>>> 128
>>
>> [SNIP]
>>> @@ -3685,7 +3760,8 @@ static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
>>>
>>> (*pos)++;
>>>
>>> - for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
>>> + for (; ptr < &savedcmd->map_cmdline_to_pid[savedcmd->cmdline_num];
>>> + ptr++) {
>>> if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
>>> continue;
>>>
>>> @@ -3700,7 +3776,7 @@ static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
>>> void *v;
>>> loff_t l = 0;
>>>
>>> - v = &map_cmdline_to_pid[0];
>>> + v = &savedcmd->map_cmdline_to_pid[0];
>>> while (l <= *pos) {
>>> v = saved_cmdlines_next(m, v, &l);
>>> if (!v)
>>
>> Are you accessing the savecmd without trace_cmdline_lock?
>
> It does not need to get trace_cmdline_lock here.
> The elements of map_pid_to_cmdline[] and saved_cmdlines[] are protected
> by trace_cmdline_lock in trace_find_cmdline(), but on the other hand
> map_cmdline_to_pid[] are not protected. There are no problems in
> particular. This is because map_cmdline_to_pid[] always refers to a
> valid process name or "<...>".
I don't get it. What does protect the savedcmd from being changed
during reading "saved_cmdlines" file with changing "nr_saved_cmdlines"?
Thanks,
Namhyung
Hi Namhyung,
(2014/02/17 16:13), Namhyung Kim wrote:
> Hi Yoshihiro,
>
> On Mon, 17 Feb 2014 13:57:13 +0900, Yoshihiro YUNOMAE wrote:
>> Hi Namhyung,
>>
>> (2014/02/14 13:50), Namhyung Kim wrote:
>>> Hi Yoshihiro,
>>>
>>> On Thu, 13 Feb 2014 10:28:58 +0900, Yoshihiro YUNOMAE wrote:
>>>> Introduce nr_saved_cmdlines I/F for changing the number of pid-comm list.
>>>> saved_cmdlines can store 128 command names using SAVED_CMDLINES now, but
>>>> 'no-existing processes' names are often lost in saved_cmdlines when we
>>>> read trace data. So, by introducing nr_saved_cmdlines I/F, the rule storing
>>>> 128 command names is changed to the command numbers defined users.
>>>>
>>>> When we write a value to nr_saved_cmdlines, the number of the value will
>>>> be stored in pid-comm list:
>>>>
>>>> # echo 1024 > /sys/kernel/debug/tracing/nr_saved_cmdlines
>>>>
>>>> Here, 1024 command names are stored. The default number is 128 and the maximum
>>>> number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
>>>> want to avoid to lose command names, we need to set 32768 to nr_saved_cmdlines.
>>>>
>>>> We can read the maximum number of the list:
>>>>
>>>> # cat /sys/kernel/debug/tracing/nr_saved_cmdlines
>>>> 128
>>>
>>> [SNIP]
>>>> @@ -3685,7 +3760,8 @@ static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
>>>>
>>>> (*pos)++;
>>>>
>>>> - for (; ptr < &map_cmdline_to_pid[SAVED_CMDLINES]; ptr++) {
>>>> + for (; ptr < &savedcmd->map_cmdline_to_pid[savedcmd->cmdline_num];
>>>> + ptr++) {
>>>> if (*ptr == -1 || *ptr == NO_CMDLINE_MAP)
>>>> continue;
>>>>
>>>> @@ -3700,7 +3776,7 @@ static void *saved_cmdlines_start(struct seq_file *m, loff_t *pos)
>>>> void *v;
>>>> loff_t l = 0;
>>>>
>>>> - v = &map_cmdline_to_pid[0];
>>>> + v = &savedcmd->map_cmdline_to_pid[0];
>>>> while (l <= *pos) {
>>>> v = saved_cmdlines_next(m, v, &l);
>>>> if (!v)
>>>
>>> Are you accessing the savecmd without trace_cmdline_lock?
>>
>> It does not need to get trace_cmdline_lock here.
>> The elements of map_pid_to_cmdline[] and saved_cmdlines[] are protected
>> by trace_cmdline_lock in trace_find_cmdline(), but on the other hand
>> map_cmdline_to_pid[] are not protected. There are no problems in
>> particular. This is because map_cmdline_to_pid[] always refers to a
>> valid process name or "<...>".
>
> I don't get it. What does protect the savedcmd from being changed
> during reading "saved_cmdlines" file with changing "nr_saved_cmdlines"?
Ah, that's true. As you say, this implementation can cause the
competition problem. I'll fix it in V2.
Thank you,
Yoshihiro YUNOMAE
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: [email protected]