2014-02-24 07:53:55

by Michael Brunner

Subject: [PATCH] mfd: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
the module description is also updated.

Signed-off-by: Michael Brunner <[email protected]>
Acked-by: Christian Rauch <[email protected]>
---
drivers/mfd/Kconfig | 5 +++++
drivers/mfd/kempld-core.c | 24 ++++++++++++++++++++++++
2 files changed, 29 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445..f093401 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -270,13 +270,18 @@ config MFD_KEMPLD
device may provide functions like watchdog, GPIO, UART and I2C bus.

The following modules are supported:
+ * COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
+ * COMe-cBT6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
+ * COMe-cHL6
* COMe-cPC2 (microETXexpress-PC)
+ * COMe-mBT10
* COMe-mCT10
+ * COMe-mTT10 (nanoETXexpress-TT)
* ETX-OH

This driver can also be built as a module. If so, the module
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index d3e2327..20a6afc 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -438,6 +438,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CHL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "CHR2",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -510,6 +518,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CVV6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "FRI2",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -533,6 +549,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "MVV1",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "NTC1",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
--
1.8.5.1

2014-02-24 16:07:59

by Lee Jones

Subject: Re: [PATCH] mfd: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

> This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
> and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
> the module description is also updated.
>
> Signed-off-by: Michael Brunner <[email protected]>
> Acked-by: Christian Rauch <[email protected]>
> ---
> drivers/mfd/Kconfig | 5 +++++
> drivers/mfd/kempld-core.c | 24 ++++++++++++++++++++++++
> 2 files changed, 29 insertions(+)

Applied, thanks.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog