Hi Justin,
CC-ing dri-devel as more KMS/radeon people will see it there.
On Mon, 31 March 2014 "Justin Piszcz" <[email protected]> wrote:
> Do I need some updated ATI firmware (I believe this might have happened in
> the past)..?
> I booted back to 3.13.6, Xorg starts up fine, but with 3.14 it does not
> start.
Could you include all the drm/kms/radeon related output from your
kernel log as well as your /proc/cmdline?
Also, are /sys/class/drm/card0* entries present with proper contents
(modes, enabled, status attributes present and with sensible values)?
What exact AMD/ATI GPU is present in your system (lspci)?
Are your graphics drivers built-in or built as a module?
Bruno
> Thoughts?
>
> 3.13.6:
> $ ps auxww|grep X
> root 4368 5.3 0.0 296648 37364 tty7 Ssl+ 18:23 0:00 /usr/bin/X
> :0 vt7 -nolisten tcp
>
> 3.14:
> [ 346.490] (**) ModulePath set to "/usr/lib/xorg/modules"
> [ 346.490] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or
> 'vmmouse' will be disabled.
> [ 346.490] (WW) Disabling Mouse0
> [ 346.490] (WW) Disabling Keyboard0
> [ 346.490] (II) [KMS] drm report modesetting isn't supported.
> [ 346.490] (EE)
> [ 346.490] (EE) Backtrace:
> [ 346.490] (EE) 0: Xorg (xorg_backtrace+0x48) [0x7fbbbd731c58]
> [ 346.490] (EE) 1: Xorg (0x7fbbbd58a000+0x1ab949) [0x7fbbbd735949]
> [ 346.490] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0
> (0x7fbbbc3c5000+0xf880) [0x7fbbbc3d4880]
> [ 346.490] (EE)
> [ 346.490] (EE) Segmentation fault at address 0x0
> [ 346.490] (EE)
> Fatal server error:
> [ 346.491] (EE) Caught signal 11 (Segmentation fault). Server aborting
> [ 346.491] (EE)
> [ 346.491] (EE)
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
> for help.
> [ 346.491] (EE) Please also check the log file at "/var/log/Xorg.0.log"
> for additional information.
> [ 346.491] (EE)
>
> Kernel config:
> http://home.comcast.net/~jpiszcz/20140331/3.14.txt
>
> Kernel diffs:
>
> $ diff -u config-20140331.1396303540 config-20140320.1395308867 | grep \^+
> +++ config-20140320.1395308867 2014-03-20 05:47:47.508584015 -0400
> +# Linux/x86 3.13.6 Kernel Configuration
> +CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
> +CONFIG_MICROCODE_INTEL_LIB=y
> +# CONFIG_CC_STACKPROTECTOR is not set
> +# CONFIG_SCSI_AIC7XXX_OLD is not set
> +# CONFIG_CPU_THERMAL is not set
> +# CONFIG_GENERIC_PHY is not set
>
> $ diff -u config-20140331.1396303540 config-20140320.1395308867 | grep \^-
> --- config-20140331.1396303540 2014-03-31 18:05:40.775863929 -0400
> -# Linux/x86 3.14.0 Kernel Configuration
> -CONFIG_HAVE_CC_STACKPROTECTOR=y
> -# CONFIG_CC_STACKPROTECTOR is not set
> -CONFIG_CC_STACKPROTECTOR_NONE=y
> -# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
> -# CONFIG_CC_STACKPROTECTOR_STRONG is not set
> -# CONFIG_ZSMALLOC is not set
> -# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
> -# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
> -# CONFIG_GENWQE is not set
> -# CONFIG_I40EVF is not set
> -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
> -# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
> -# CONFIG_ACPI_INT3403_THERMAL is not set
> -# CONFIG_DW_WATCHDOG is not set
> -# CONFIG_MFD_MAX14577 is not set
> -# CONFIG_MFD_LP3943 is not set
> -# CONFIG_DRM_I915 is not set
> -# CONFIG_DRM_BOCHS is not set
> -# CONFIG_FB_OPENCORES is not set
> -# CONFIG_USB_MUSB_HDRC is not set
> -# CONFIG_USB_DWC2 is not set
> -# CONFIG_USB_SERIAL_MXUPORT is not set
> -# CONFIG_USB_OTG_FSM is not set
> -# CONFIG_RTC_DRV_ISL12057 is not set
> -# CONFIG_HP_WIRELESS is not set
> -CONFIG_GENERIC_PHY=y
> -# CONFIG_BCM_KONA_USB2_PHY is not set
> -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
> -CONFIG_PANIC_TIMEOUT=0
>
>
>
> Justin.
> -----Original Message-----
> From: Bruno Pr?mont [mailto:[email protected]]
> Sent: Tuesday, April 01, 2014 4:22 PM
> To: Justin Piszcz
> Cc: [email protected]; [email protected]
> Subject: Re: X.org doesn't start with 3.14: [KMS] drm report modesetting
isn't
> supported
>
> Hi Justin,
>
> CC-ing dri-devel as more KMS/radeon people will see it there.
[ .. ]
My issue:
[ 0.623399] [drm] Loading CEDAR Microcode
[ 0.623461] r600_cp: Failed to load firmware "radeon/CEDAR_pfp.bin"
[ 0.623517] [drm:evergreen_init] *ERROR* Failed to load firmware!
[ 0.623573] radeon 0000:05:00.0: Fatal error during GPU init
[ 0.623629] [drm] radeon: finishing device.
Somehow this option became unselected in my kernel configuration, although I
almost always usually run make oldconfig-- so I am not sure how it happened:
[ ] Include in-kernel firmware blobs in kernel binary
Back to normal as per below:
-*- Userspace firmware loading support
[*] Include in-kernel firmware blobs in kernel binary
(radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin
radeon/CYPRESS_uvd.bin)
External firmware (/lib/firmware) Firmware blobs root directory
# pwd
/lib/firmware/radeon
# ls -l *CEDAR*pfp*
-rw-r--r-- 1 root root 4480 Feb 22 16:50 CEDAR_pfp.bin
#
[ .. ]
Thank you && sorry for the noise!
Justin.