2014-04-20 09:56:08

by Shaik Ameer Basha

[permalink] [raw]
Subject: Re: [PATCH v11 12/27] ARM: dts: Add description of System MMU of Exynos SoCs

Hi KyongHo Cho,

Please find the comments inline.

On Fri, Mar 14, 2014 at 10:36 AM, Cho KyongHo <[email protected]> wrote:
> This patch adds dts entries for the System MMU devices found on
> Exynos4 and Exynos5 SoC series and the System MMU binding
> documentation.
>
> CC: Rob Herring <[email protected]>
> CC: Sylwester Nawrocki <[email protected]>
> Signed-off-by: Cho KyongHo <[email protected]>
> ---
> .../bindings/iommu/samsung,exynos4210-sysmmu.txt | 86 +++++++
> arch/arm/boot/dts/exynos4.dtsi | 107 ++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 23 +-
> arch/arm/boot/dts/exynos4x12.dtsi | 77 +++++-
> arch/arm/boot/dts/exynos5250.dtsi | 266 +++++++++++++++++++-
> arch/arm/boot/dts/exynos5420.dtsi | 205 ++++++++++++++-
> 6 files changed, 758 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
>
> diff --git a/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> new file mode 100644
> index 0000000..e4417bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> @@ -0,0 +1,86 @@
> +Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
> +
> +Samsung's Exynos architecture contains System MMUs that enables scattered
> +physical memory chunks visible as a contiguous region to DMA-capable peripheral
> +devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
> +

[snip]


> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 8f6300f..df336ea 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -80,6 +80,16 @@
> reg = <0x10044040 0x20>;
> };
>
> + pd_isp: isp-power-domain@0x10044020 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10044020 0x20>;
> + };
> +
> + pd_disp1: disp1-power-domain@0x100440A0 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x100440A0 0x20>;
> + };
> +
> clock: clock-controller@10010000 {
> compatible = "samsung,exynos5250-clock";
> reg = <0x10010000 0x30000>;
> @@ -679,7 +689,7 @@
> "sclk_hdmiphy", "mout_hdmi";
> };
>
> - mixer {
> + mixer: mixer {
> compatible = "samsung,exynos5250-mixer";
> reg = <0x14450000 0x10000>;
> interrupts = <0 94 0>;
> @@ -700,7 +710,7 @@
> phy-names = "dp";
> };
>
> - fimd@14400000 {
> + fimd: fimd@14400000 {
> clocks = <&clock 133>, <&clock 339>;
> clock-names = "sclk_fimd", "fimd";
> };
> @@ -715,4 +725,256 @@
> io-channel-ranges;
> status = "disabled";
> };
> +
> + sysmmu_g2d: sysmmu@10A60000 {
> + compatible = "samsung,sysmmu-v1";
> + reg = <0x10A60000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <24 5>;
> + clock-names = "sysmmu";
> + clocks = <&clock 361>;
> + };
> +
> + sysmmu_mfc_r: sysmmu@11200000 {
> + compatible = "samsung,sysmmu-v2";
> + reg = <0x11200000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <6 2>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 268>, <&clock 266>;

Add mmu-masters...
mmu-masters = <&mfc>;

> + samsung,power-domain = <&pd_mfc>;
> + };
> +
> + sysmmu_mfc_l: sysmmu@11210000 {
> + compatible = "samsung,sysmmu-v2";
> + reg = <0x11210000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <8 5>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 267>, <&clock 266>;

Add mmu-masters...
mmu-masters = <&mfc>;


> + samsung,power-domain = <&pd_mfc>;
> + };
> +
> + sysmmu_rotator: sysmmu@11D40000 {
> + compatible = "samsung,sysmmu-v1";
> + reg = <0x11D40000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <4 0>;
> + clock-names = "sysmmu";
> + clocks = <&clock 272>;
> + };
> +

[snip]

> };
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 45e2e65..a736f09 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -470,7 +470,7 @@
> phy-names = "dp";
> };
>
> - fimd@14400000 {
> + fimd: fimd@14400000 {
> samsung,power-domain = <&disp_pd>;
> clocks = <&clock 147>, <&clock 421>;
> clock-names = "sclk_fimd", "fimd";
> @@ -641,7 +641,7 @@
> status = "disabled";
> };
>
> - mixer@14450000 {
> + mixer: mixer@14450000 {
> compatible = "samsung,exynos5420-mixer";
> reg = <0x14450000 0x10000>;
> interrupts = <0 94 0>;
> @@ -720,4 +720,205 @@
> clock-names = "watchdog";
> samsung,syscon-phandle = <&pmu_system_controller>;
> };
> +
> + sysmmu_g2dr: sysmmu@10A60000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x10A60000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <24 5>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 482>, <&clock 481>;
> + };
> +
> + sysmmu_g2dw: sysmmu@10A70000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x10A60000 0x1000>;

Duplicate sysmmu reg base address.
reg = <0x10A70000 0x1000>;

> + interrupt-parent = <&combiner>;
> + interrupts = <22 2>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 482>, <&clock 481>;
> + };
> +
> + sysmmu_scaler0r: sysmmu@12880000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x12880000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <22 4>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 384>, <&clock 381>;
> + };
> +
> + sysmmu_scaler1r: sysmmu@12890000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x12890000 0x1000>;
> + interrupts = <0 186 0>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 385>, <&clock 382>;
> + };
> +
> + sysmmu_scaler2r: sysmmu@128A0000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x128A0000 0x1000>;
> + interrupts = <0 188 0>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 386>, <&clock 383>;
> + };
> +
> + sysmmu_scaler0w: sysmmu@128C0000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x128C0000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <27 2>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 384>, <&clock 381>;
> + };
> +
> + sysmmu_scaler1w: sysmmu@128D0000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x128D0000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <22 6>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 385>, <&clock 382>;
> + };
> +
> + sysmmu_scaler2w: sysmmu@128E0000 {
> + compatible = "samsung,sysmmu-v3.2";
> + reg = <0x128E0000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <19 6>;
> + clock-names = "sysmmu", "master";
> + clocks = <&clock 386>, <&clock 383>;
> + };
> +
> + sysmmu_mfc_r: sysmmu@11200000 {

0x11200000 belongs to mfc_l
sysmmu_mfc_l: sysmmu@11200000

> + compatible = "samsung,sysmmu-v2";
> + reg = <0x11200000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <6 2>;

interrupts = <8 5>;
Add mmu-masters field,
mmu-masters = <&mfc>;

> + clock-names = "sysmmu", "master";
> + clocks = <&clock 402>, <&clock 401>;

clocks = <&clock 403>, <&clock 401>;

> + samsung,power-domain = <&mfc_pd>;
> + };
> +
> + sysmmu_mfc_l: sysmmu@11210000 {

0x11210000 belongs to mfc_r
sysmmu_mfc_r: sysmmu@11210000

> + compatible = "samsung,sysmmu-v2";
> + reg = <0x11210000 0x1000>;
> + interrupt-parent = <&combiner>;
> + interrupts = <8 5>;

interrupts = <6 2>;
Add mmu-masters field,
mmu-masters = <&mfc>;

> + clock-names = "sysmmu", "master";
> + clocks = <&clock 403>, <&clock 401>;

clocks = <&clock 402>, <&clock 401>;

Regards,
Shaik Ameer Basha


2014-04-22 12:36:34

by Cho KyongHo

[permalink] [raw]
Subject: Re: [PATCH v11 12/27] ARM: dts: Add description of System MMU of Exynos SoCs

On Sun, 20 Apr 2014 15:25:59 +0530, Shaik Ameer Basha wrote:
> Hi KyongHo Cho,
>
> Please find the comments inline.
>
> On Fri, Mar 14, 2014 at 10:36 AM, Cho KyongHo <[email protected]> wrote:
> > This patch adds dts entries for the System MMU devices found on
> > Exynos4 and Exynos5 SoC series and the System MMU binding
> > documentation.
> >
> > CC: Rob Herring <[email protected]>
> > CC: Sylwester Nawrocki <[email protected]>
> > Signed-off-by: Cho KyongHo <[email protected]>
> > ---
> > .../bindings/iommu/samsung,exynos4210-sysmmu.txt | 86 +++++++
> > arch/arm/boot/dts/exynos4.dtsi | 107 ++++++++
> > arch/arm/boot/dts/exynos4210.dtsi | 23 +-
> > arch/arm/boot/dts/exynos4x12.dtsi | 77 +++++-
> > arch/arm/boot/dts/exynos5250.dtsi | 266 +++++++++++++++++++-
> > arch/arm/boot/dts/exynos5420.dtsi | 205 ++++++++++++++-
> > 6 files changed, 758 insertions(+), 6 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > new file mode 100644
> > index 0000000..e4417bb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
> > @@ -0,0 +1,86 @@
> > +Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
> > +
> > +Samsung's Exynos architecture contains System MMUs that enables scattered
> > +physical memory chunks visible as a contiguous region to DMA-capable peripheral
> > +devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
> > +
>
> [snip]
>
>
> > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> > index 8f6300f..df336ea 100644
> > --- a/arch/arm/boot/dts/exynos5250.dtsi
> > +++ b/arch/arm/boot/dts/exynos5250.dtsi
> > @@ -80,6 +80,16 @@
> > reg = <0x10044040 0x20>;
> > };
> >
> > + pd_isp: isp-power-domain@0x10044020 {
> > + compatible = "samsung,exynos4210-pd";
> > + reg = <0x10044020 0x20>;
> > + };
> > +
> > + pd_disp1: disp1-power-domain@0x100440A0 {
> > + compatible = "samsung,exynos4210-pd";
> > + reg = <0x100440A0 0x20>;
> > + };
> > +
> > clock: clock-controller@10010000 {
> > compatible = "samsung,exynos5250-clock";
> > reg = <0x10010000 0x30000>;
> > @@ -679,7 +689,7 @@
> > "sclk_hdmiphy", "mout_hdmi";
> > };
> >
> > - mixer {
> > + mixer: mixer {
> > compatible = "samsung,exynos5250-mixer";
> > reg = <0x14450000 0x10000>;
> > interrupts = <0 94 0>;
> > @@ -700,7 +710,7 @@
> > phy-names = "dp";
> > };
> >
> > - fimd@14400000 {
> > + fimd: fimd@14400000 {
> > clocks = <&clock 133>, <&clock 339>;
> > clock-names = "sclk_fimd", "fimd";
> > };
> > @@ -715,4 +725,256 @@
> > io-channel-ranges;
> > status = "disabled";
> > };
> > +
> > + sysmmu_g2d: sysmmu@10A60000 {
> > + compatible = "samsung,sysmmu-v1";
> > + reg = <0x10A60000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <24 5>;
> > + clock-names = "sysmmu";
> > + clocks = <&clock 361>;
> > + };
> > +
> > + sysmmu_mfc_r: sysmmu@11200000 {
> > + compatible = "samsung,sysmmu-v2";
> > + reg = <0x11200000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <6 2>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 268>, <&clock 266>;
>
> Add mmu-masters...
> mmu-masters = <&mfc>;
>

Ok.

> > + samsung,power-domain = <&pd_mfc>;
> > + };
> > +
> > + sysmmu_mfc_l: sysmmu@11210000 {
> > + compatible = "samsung,sysmmu-v2";
> > + reg = <0x11210000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <8 5>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 267>, <&clock 266>;
>
> Add mmu-masters...
> mmu-masters = <&mfc>;
>

OK.

>
> > + samsung,power-domain = <&pd_mfc>;
> > + };
> > +
> > + sysmmu_rotator: sysmmu@11D40000 {
> > + compatible = "samsung,sysmmu-v1";
> > + reg = <0x11D40000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <4 0>;
> > + clock-names = "sysmmu";
> > + clocks = <&clock 272>;
> > + };
> > +
>
> [snip]
>
> > };
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> > index 45e2e65..a736f09 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -470,7 +470,7 @@
> > phy-names = "dp";
> > };
> >
> > - fimd@14400000 {
> > + fimd: fimd@14400000 {
> > samsung,power-domain = <&disp_pd>;
> > clocks = <&clock 147>, <&clock 421>;
> > clock-names = "sclk_fimd", "fimd";
> > @@ -641,7 +641,7 @@
> > status = "disabled";
> > };
> >
> > - mixer@14450000 {
> > + mixer: mixer@14450000 {
> > compatible = "samsung,exynos5420-mixer";
> > reg = <0x14450000 0x10000>;
> > interrupts = <0 94 0>;
> > @@ -720,4 +720,205 @@
> > clock-names = "watchdog";
> > samsung,syscon-phandle = <&pmu_system_controller>;
> > };
> > +
> > + sysmmu_g2dr: sysmmu@10A60000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x10A60000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <24 5>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 482>, <&clock 481>;
> > + };
> > +
> > + sysmmu_g2dw: sysmmu@10A70000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x10A60000 0x1000>;
>
> Duplicate sysmmu reg base address.
> reg = <0x10A70000 0x1000>;
>

Oh, really it is.
Thanks.

> > + interrupt-parent = <&combiner>;
> > + interrupts = <22 2>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 482>, <&clock 481>;
> > + };
> > +
> > + sysmmu_scaler0r: sysmmu@12880000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x12880000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <22 4>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 384>, <&clock 381>;
> > + };
> > +
> > + sysmmu_scaler1r: sysmmu@12890000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x12890000 0x1000>;
> > + interrupts = <0 186 0>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 385>, <&clock 382>;
> > + };
> > +
> > + sysmmu_scaler2r: sysmmu@128A0000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x128A0000 0x1000>;
> > + interrupts = <0 188 0>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 386>, <&clock 383>;
> > + };
> > +
> > + sysmmu_scaler0w: sysmmu@128C0000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x128C0000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <27 2>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 384>, <&clock 381>;
> > + };
> > +
> > + sysmmu_scaler1w: sysmmu@128D0000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x128D0000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <22 6>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 385>, <&clock 382>;
> > + };
> > +
> > + sysmmu_scaler2w: sysmmu@128E0000 {
> > + compatible = "samsung,sysmmu-v3.2";
> > + reg = <0x128E0000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <19 6>;
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 386>, <&clock 383>;
> > + };
> > +
> > + sysmmu_mfc_r: sysmmu@11200000 {
>
> 0x11200000 belongs to mfc_l
> sysmmu_mfc_l: sysmmu@11200000
>

OK. thanks.

> > + compatible = "samsung,sysmmu-v2";
> > + reg = <0x11200000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <6 2>;
>
> interrupts = <8 5>;
> Add mmu-masters field,
> mmu-masters = <&mfc>;

Oh, irq is also changed.
Thanks.

>
> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 402>, <&clock 401>;
>
> clocks = <&clock 403>, <&clock 401>;

Thanks.

This will be fixed with macro names.

>
> > + samsung,power-domain = <&mfc_pd>;
> > + };
> > +
> > + sysmmu_mfc_l: sysmmu@11210000 {
>
> 0x11210000 belongs to mfc_r
> sysmmu_mfc_r: sysmmu@11210000
>

OK.

> > + compatible = "samsung,sysmmu-v2";
> > + reg = <0x11210000 0x1000>;
> > + interrupt-parent = <&combiner>;
> > + interrupts = <8 5>;
>
> interrupts = <6 2>;
> Add mmu-masters field,
> mmu-masters = <&mfc>;
>

OK.

> > + clock-names = "sysmmu", "master";
> > + clocks = <&clock 403>, <&clock 401>;
>
> clocks = <&clock 402>, <&clock 401>;
>

Thanks for pointing out many mistakes.

Regards,

KyongHo