This patch moves data allocated using ioremap to managed data allocated
using devm_ioremap and cleans now unnecessary iounmaps in probe and remove
functions. Also the unnecessary label iounmap is done away with.
Signed-off-by: Himangi Saraogi <[email protected]>
---
I wonder if mic_card_map and mic_card_unmap can be used on the same data
as the devm_ioremap in the probe function. If yes, can I devmify them as well,
in which case mic_card_unmap will not be required.
drivers/misc/mic/card/mic_x100.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c
index 2868945..5f26b17 100644
--- a/drivers/misc/mic/card/mic_x100.c
+++ b/drivers/misc/mic/card/mic_x100.c
@@ -159,7 +159,8 @@ static int __init mic_probe(struct platform_device *pdev)
mdev->mmio.pa = MIC_X100_MMIO_BASE;
mdev->mmio.len = MIC_X100_MMIO_LEN;
- mdev->mmio.va = ioremap(MIC_X100_MMIO_BASE, MIC_X100_MMIO_LEN);
+ mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
+ MIC_X100_MMIO_LEN);
if (!mdev->mmio.va) {
dev_err(&pdev->dev, "Cannot remap MMIO BAR\n");
rc = -EIO;
@@ -169,22 +170,17 @@ static int __init mic_probe(struct platform_device *pdev)
rc = mic_driver_init(mdrv);
if (rc) {
dev_err(&pdev->dev, "mic_driver_init failed rc %d\n", rc);
- goto iounmap;
+ goto done;
}
done:
return rc;
-iounmap:
- iounmap(mdev->mmio.va);
- return rc;
}
static int mic_remove(struct platform_device *pdev)
{
struct mic_driver *mdrv = &g_drv;
- struct mic_device *mdev = &mdrv->mdev;
mic_driver_uninit(mdrv);
- iounmap(mdev->mmio.va);
return 0;
}
--
1.9.1
On Mon, 2014-06-02 at 00:24 +0530, Himangi Saraogi wrote:
> This patch moves data allocated using ioremap to managed data allocated
> using devm_ioremap and cleans now unnecessary iounmaps in probe and remove
> functions. Also the unnecessary label iounmap is done away with.
>
> Signed-off-by: Himangi Saraogi <[email protected]>
> ---
> I wonder if mic_card_map and mic_card_unmap can be used on the same data
> as the devm_ioremap in the probe function. If yes, can I devmify them as well,
> in which case mic_card_unmap will not be required.
>
Hi Himangi,
Thanks for the patch which I have tested on MIC and it works fine.
mic_card_map(..) and mic_card_unmap(..) can be called multiple times
while the driver is loaded so it would be best to leave those APIs
unchanged or modify them to use devm_ioremap(..) and devm_iounmap(..)
instead.
This patch does create conflicts with a MIC DMA patch series under
review @ https://lkml.org/lkml/2014/5/29/981 I will send your patch to
Greg K-H for inclusion in char-misc-next once the larger patch is
accepted so that there are no conflicts.
Thanks,
Sudeep Dutt
> drivers/misc/mic/card/mic_x100.c | 10 +++-------
> 1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c
> index 2868945..5f26b17 100644
> --- a/drivers/misc/mic/card/mic_x100.c
> +++ b/drivers/misc/mic/card/mic_x100.c
> @@ -159,7 +159,8 @@ static int __init mic_probe(struct platform_device *pdev)
>
> mdev->mmio.pa = MIC_X100_MMIO_BASE;
> mdev->mmio.len = MIC_X100_MMIO_LEN;
> - mdev->mmio.va = ioremap(MIC_X100_MMIO_BASE, MIC_X100_MMIO_LEN);
> + mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
> + MIC_X100_MMIO_LEN);
> if (!mdev->mmio.va) {
> dev_err(&pdev->dev, "Cannot remap MMIO BAR\n");
> rc = -EIO;
> @@ -169,22 +170,17 @@ static int __init mic_probe(struct platform_device *pdev)
> rc = mic_driver_init(mdrv);
> if (rc) {
> dev_err(&pdev->dev, "mic_driver_init failed rc %d\n", rc);
> - goto iounmap;
> + goto done;
> }
> done:
> return rc;
> -iounmap:
> - iounmap(mdev->mmio.va);
> - return rc;
> }
>
> static int mic_remove(struct platform_device *pdev)
> {
> struct mic_driver *mdrv = &g_drv;
> - struct mic_device *mdev = &mdrv->mdev;
>
> mic_driver_uninit(mdrv);
> - iounmap(mdev->mmio.va);
> return 0;
> }
>