This patchset adds support for the Active-Semi act8846 PMU [1] to the
existing driver for act8865.
A dts which enables the act8846 on Radxa Rock is available at [2].
Changes since v1:
- rebased on current regulator tree
- reworded message of patch "set correct number of regulators in pdata"
- added Wenyou Yang's Tested-by
[1] http://www.active-semi.com/products/power-management-units/act88xx/
[2] https://github.com/bengal/linux/tree/act88xx-regulator
Beniamino Galvani (4):
regulator: act8865: set correct number of regulators in pdata
regulator: act8865: prepare support for other act88xx devices
regulator: act8865: add support for act8846
regulator: act8865: add act8846 to DT binding documentation
.../bindings/regulator/act8865-regulator.txt | 7 +-
drivers/regulator/act8865-regulator.c | 282 +++++++++++---------
include/linux/regulator/act8865.h | 23 +-
3 files changed, 181 insertions(+), 131 deletions(-)
--
1.7.10.4
act8865_pdata_from_dt() populates the array pdata->regulators with all
the regulators and then assigns the field init_data only for the ones
actually found in the DT.
The patch changes the value assigned to pdata->num_regulators to match
the size of the array.
Signed-off-by: Beniamino Galvani <[email protected]>
Tested-by: Wenyou Yang <[email protected]>
---
drivers/regulator/act8865-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index f07be36..52d1b6c 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -230,7 +230,7 @@ static int act8865_pdata_from_dt(struct device *dev,
if (!pdata->regulators)
return -ENOMEM;
- pdata->num_regulators = matched;
+ pdata->num_regulators = ARRAY_SIZE(act8865_matches);
regulator = pdata->regulators;
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
--
1.7.10.4
Add device id and definition of registers and regulators to support
the act8846 PMU.
Signed-off-by: Beniamino Galvani <[email protected]>
Tested-by: Wenyou Yang <[email protected]>
---
drivers/regulator/act8865-regulator.c | 71 +++++++++++++++++++++++++++++++++
include/linux/regulator/act8865.h | 17 ++++++++
2 files changed, 88 insertions(+)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index b26eaf7..a5ad69a 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -29,6 +29,40 @@
#include <linux/regmap.h>
/*
+ * ACT8846 Global Register Map.
+ */
+#define ACT8846_SYS0 0x00
+#define ACT8846_SYS1 0x01
+#define ACT8846_REG1_VSET 0x10
+#define ACT8846_REG1_CTRL 0x12
+#define ACT8846_REG2_VSET0 0x20
+#define ACT8846_REG2_VSET1 0x21
+#define ACT8846_REG2_CTRL 0x22
+#define ACT8846_REG3_VSET0 0x30
+#define ACT8846_REG3_VSET1 0x31
+#define ACT8846_REG3_CTRL 0x32
+#define ACT8846_REG4_VSET0 0x40
+#define ACT8846_REG4_VSET1 0x41
+#define ACT8846_REG4_CTRL 0x42
+#define ACT8846_REG5_VSET 0x50
+#define ACT8846_REG5_CTRL 0x51
+#define ACT8846_REG6_VSET 0x58
+#define ACT8846_REG6_CTRL 0x59
+#define ACT8846_REG7_VSET 0x60
+#define ACT8846_REG7_CTRL 0x61
+#define ACT8846_REG8_VSET 0x68
+#define ACT8846_REG8_CTRL 0x69
+#define ACT8846_REG9_VSET 0x70
+#define ACT8846_REG9_CTRL 0x71
+#define ACT8846_REG10_VSET 0x80
+#define ACT8846_REG10_CTRL 0x81
+#define ACT8846_REG11_VSET 0x90
+#define ACT8846_REG11_CTRL 0x91
+#define ACT8846_REG12_VSET 0xa0
+#define ACT8846_REG12_CTRL 0xa1
+#define ACT8846_REG13_CTRL 0xb1
+
+/*
* ACT8865 Global Register Map.
*/
#define ACT8865_SYS_MODE 0x00
@@ -103,6 +137,21 @@ static struct regulator_ops act8865_ops = {
.owner = THIS_MODULE, \
}
+static const struct regulator_desc act8846_regulators[] = {
+ ACT88xx_REG("REG1", ACT8846, REG1, VSET),
+ ACT88xx_REG("REG2", ACT8846, REG2, VSET0),
+ ACT88xx_REG("REG3", ACT8846, REG3, VSET0),
+ ACT88xx_REG("REG4", ACT8846, REG4, VSET0),
+ ACT88xx_REG("REG5", ACT8846, REG5, VSET),
+ ACT88xx_REG("REG6", ACT8846, REG6, VSET),
+ ACT88xx_REG("REG7", ACT8846, REG7, VSET),
+ ACT88xx_REG("REG8", ACT8846, REG8, VSET),
+ ACT88xx_REG("REG9", ACT8846, REG9, VSET),
+ ACT88xx_REG("REG10", ACT8846, REG10, VSET),
+ ACT88xx_REG("REG11", ACT8846, REG11, VSET),
+ ACT88xx_REG("REG12", ACT8846, REG12, VSET),
+};
+
static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1),
@@ -115,11 +164,27 @@ static const struct regulator_desc act8865_regulators[] = {
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
+ { .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
+static struct of_regulator_match act8846_matches[] = {
+ [ACT8846_ID_REG1] = { .name = "REG1" },
+ [ACT8846_ID_REG2] = { .name = "REG2" },
+ [ACT8846_ID_REG3] = { .name = "REG3" },
+ [ACT8846_ID_REG4] = { .name = "REG4" },
+ [ACT8846_ID_REG5] = { .name = "REG5" },
+ [ACT8846_ID_REG6] = { .name = "REG6" },
+ [ACT8846_ID_REG7] = { .name = "REG7" },
+ [ACT8846_ID_REG8] = { .name = "REG8" },
+ [ACT8846_ID_REG9] = { .name = "REG9" },
+ [ACT8846_ID_REG10] = { .name = "REG10" },
+ [ACT8846_ID_REG11] = { .name = "REG11" },
+ [ACT8846_ID_REG12] = { .name = "REG12" },
+};
+
static struct of_regulator_match act8865_matches[] = {
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
@@ -222,6 +287,11 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
switch (type) {
+ case ACT8846:
+ matches = act8846_matches;
+ regulators = act8846_regulators;
+ num_regulators = ARRAY_SIZE(act8846_regulators);
+ break;
case ACT8865:
matches = act8865_matches;
regulators = act8865_regulators;
@@ -290,6 +360,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
static const struct i2c_device_id act8865_ids[] = {
+ { .name = "act8846", .driver_data = ACT8846 },
{ .name = "act8865", .driver_data = ACT8865 },
{ },
};
diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h
index b49be81..b6c4909 100644
--- a/include/linux/regulator/act8865.h
+++ b/include/linux/regulator/act8865.h
@@ -30,7 +30,24 @@ enum {
};
enum {
+ ACT8846_ID_REG1,
+ ACT8846_ID_REG2,
+ ACT8846_ID_REG3,
+ ACT8846_ID_REG4,
+ ACT8846_ID_REG5,
+ ACT8846_ID_REG6,
+ ACT8846_ID_REG7,
+ ACT8846_ID_REG8,
+ ACT8846_ID_REG9,
+ ACT8846_ID_REG10,
+ ACT8846_ID_REG11,
+ ACT8846_ID_REG12,
+ ACT8846_REG_NUM,
+};
+
+enum {
ACT8865,
+ ACT8846,
};
/**
--
1.7.10.4
This patch adds a new "active-semi,act8846" compatible string and a
list of supported regulator names to the devicetree binding
documentation for Active-Semi PMUs.
Signed-off-by: Beniamino Galvani <[email protected]>
---
.../devicetree/bindings/regulator/act8865-regulator.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index bef1fbb..865614b 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -1,13 +1,16 @@
-ACT8865 regulator
+ACT88xx regulators
-------------------
Required properties:
-- compatible: "active-semi,act8865"
+- compatible: "active-semi,act8846" or "active-semi,act8865"
- reg: I2C slave address
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
+ - for act8846:
+ REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
+ - for act8865:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
Example:
--
1.7.10.4
This patch prepares support for other devices in the act88xx family of
PMUs manufactured by Active-Semi.
http://www.active-semi.com/products/power-management-units/act88xx/
Signed-off-by: Beniamino Galvani <[email protected]>
Tested-by: Wenyou Yang <[email protected]>
---
drivers/regulator/act8865-regulator.c | 211 +++++++++++++--------------------
include/linux/regulator/act8865.h | 6 +-
2 files changed, 88 insertions(+), 129 deletions(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 52d1b6c..b26eaf7 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -1,6 +1,7 @@
/*
- * act8865-regulator.c - Voltage regulation for the active-semi ACT8865
- * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
+ * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
+ *
+ * http://www.active-semi.com/products/power-management-units/act88xx/
*
* Copyright (C) 2013 Atmel Corporation
*
@@ -70,7 +71,7 @@ static const struct regmap_config act8865_regmap_config = {
.val_bits = 8,
};
-static const struct regulator_linear_range act8865_volatge_ranges[] = {
+static const struct regulator_linear_range act8865_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
@@ -86,110 +87,35 @@ static struct regulator_ops act8865_ops = {
.is_enabled = regulator_is_enabled_regmap,
};
-static const struct regulator_desc act8865_reg[] = {
- {
- .name = "DCDC_REG1",
- .id = ACT8865_ID_DCDC1,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_DCDC1_VSET1,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_DCDC1_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "DCDC_REG2",
- .id = ACT8865_ID_DCDC2,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_DCDC2_VSET1,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_DCDC2_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "DCDC_REG3",
- .id = ACT8865_ID_DCDC3,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_DCDC3_VSET1,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_DCDC3_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "LDO_REG1",
- .id = ACT8865_ID_LDO1,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_LDO1_VSET,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_LDO1_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "LDO_REG2",
- .id = ACT8865_ID_LDO2,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_LDO2_VSET,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_LDO2_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "LDO_REG3",
- .id = ACT8865_ID_LDO3,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_LDO3_VSET,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_LDO3_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
- {
- .name = "LDO_REG4",
- .id = ACT8865_ID_LDO4,
- .ops = &act8865_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = ACT8865_VOLTAGE_NUM,
- .linear_ranges = act8865_volatge_ranges,
- .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
- .vsel_reg = ACT8865_LDO4_VSET,
- .vsel_mask = ACT8865_VSEL_MASK,
- .enable_reg = ACT8865_LDO4_CTRL,
- .enable_mask = ACT8865_ENA,
- .owner = THIS_MODULE,
- },
+#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \
+ [_family##_ID_##_id] = { \
+ .name = _name, \
+ .id = _family##_ID_##_id, \
+ .type = REGULATOR_VOLTAGE, \
+ .ops = &act8865_ops, \
+ .n_voltages = ACT8865_VOLTAGE_NUM, \
+ .linear_ranges = act8865_voltage_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
+ .vsel_reg = _family##_##_id##_##_vsel_reg, \
+ .vsel_mask = ACT8865_VSEL_MASK, \
+ .enable_reg = _family##_##_id##_CTRL, \
+ .enable_mask = ACT8865_ENA, \
+ .owner = THIS_MODULE, \
+ }
+
+static const struct regulator_desc act8865_regulators[] = {
+ ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1),
+ ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1),
+ ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1),
+ ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET),
+ ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET),
+ ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET),
+ ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET),
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
- { .compatible = "active-semi,act8865" },
+ { .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
@@ -206,7 +132,9 @@ static struct of_regulator_match act8865_matches[] = {
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
- struct act8865_platform_data *pdata)
+ struct act8865_platform_data *pdata,
+ struct of_regulator_match *matches,
+ int num_matches)
{
int matched, i;
struct device_node *np;
@@ -218,26 +146,25 @@ static int act8865_pdata_from_dt(struct device *dev,
return -EINVAL;
}
- matched = of_regulator_match(dev, np,
- act8865_matches, ARRAY_SIZE(act8865_matches));
+ matched = of_regulator_match(dev, np, matches, num_matches);
of_node_put(np);
if (matched <= 0)
return matched;
pdata->regulators = devm_kzalloc(dev,
- sizeof(struct act8865_regulator_data) *
- ARRAY_SIZE(act8865_matches), GFP_KERNEL);
+ sizeof(struct act8865_regulator_data) *
+ num_matches, GFP_KERNEL);
if (!pdata->regulators)
return -ENOMEM;
- pdata->num_regulators = ARRAY_SIZE(act8865_matches);
+ pdata->num_regulators = num_matches;
regulator = pdata->regulators;
- for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
+ for (i = 0; i < num_matches; i++) {
regulator->id = i;
- regulator->name = act8865_matches[i].name;
- regulator->platform_data = act8865_matches[i].init_data;
- of_node[i] = act8865_matches[i].of_node;
+ regulator->name = matches[i].name;
+ regulator->platform_data = matches[i].init_data;
+ of_node[i] = matches[i].of_node;
regulator++;
}
@@ -269,34 +196,59 @@ static struct regulator_init_data
}
static int act8865_pmic_probe(struct i2c_client *client,
- const struct i2c_device_id *i2c_id)
+ const struct i2c_device_id *i2c_id)
{
- struct regulator_dev *rdev;
+ static const struct regulator_desc *regulators;
+ struct act8865_platform_data pdata_of, *pdata;
+ struct of_regulator_match *matches;
struct device *dev = &client->dev;
- struct act8865_platform_data *pdata = dev_get_platdata(dev);
- struct regulator_config config = { };
+ struct device_node **of_node;
+ int i, ret, num_regulators;
struct act8865 *act8865;
- struct device_node *of_node[ACT8865_REG_NUM];
- int i;
- int ret;
+ unsigned long type;
+
+ pdata = dev_get_platdata(dev);
if (dev->of_node && !pdata) {
const struct of_device_id *id;
- struct act8865_platform_data pdata_of;
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
if (!id)
return -ENODEV;
- ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
+ type = (unsigned long) id->data;
+ } else {
+ type = i2c_id->driver_data;
+ }
+
+ switch (type) {
+ case ACT8865:
+ matches = act8865_matches;
+ regulators = act8865_regulators;
+ num_regulators = ARRAY_SIZE(act8865_regulators);
+ break;
+ default:
+ dev_err(dev, "invalid device id %lu\n", type);
+ return -EINVAL;
+ }
+
+ of_node = devm_kzalloc(dev, sizeof(struct device_node *) *
+ num_regulators, GFP_KERNEL);
+ if (!of_node)
+ return -ENOMEM;
+
+ if (dev->of_node && !pdata) {
+ ret = act8865_pdata_from_dt(dev, of_node, &pdata_of, matches,
+ num_regulators);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
- if (pdata->num_regulators > ACT8865_REG_NUM) {
- dev_err(dev, "Too many regulators found!\n");
+ if (pdata->num_regulators > num_regulators) {
+ dev_err(dev, "too many regulators: %d\n",
+ pdata->num_regulators);
return -EINVAL;
}
@@ -313,8 +265,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
/* Finally register devices */
- for (i = 0; i < ACT8865_REG_NUM; i++) {
- const struct regulator_desc *desc = &act8865_reg[i];
+ for (i = 0; i < num_regulators; i++) {
+ const struct regulator_desc *desc = ®ulators[i];
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
config.dev = dev;
config.init_data = act8865_get_init_data(desc->id, pdata);
@@ -330,12 +284,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
i2c_set_clientdata(client, act8865);
+ devm_kfree(dev, of_node);
return 0;
}
static const struct i2c_device_id act8865_ids[] = {
- { "act8865", 0 },
+ { .name = "act8865", .driver_data = ACT8865 },
{ },
};
MODULE_DEVICE_TABLE(i2c, act8865_ids);
@@ -351,6 +306,6 @@ static struct i2c_driver act8865_pmic_driver = {
module_i2c_driver(act8865_pmic_driver);
-MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
+MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver");
MODULE_AUTHOR("Wenyou Yang <[email protected]>");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h
index 49206c1..b49be81 100644
--- a/include/linux/regulator/act8865.h
+++ b/include/linux/regulator/act8865.h
@@ -1,5 +1,5 @@
/*
- * act8865.h -- Voltage regulation for the active-semi act8865
+ * act8865.h -- Voltage regulation for active-semi act88xx PMUs
*
* Copyright (C) 2013 Atmel Corporation.
*
@@ -29,6 +29,10 @@ enum {
ACT8865_REG_NUM,
};
+enum {
+ ACT8865,
+};
+
/**
* act8865_regulator_data - regulator data
* @id: regulator id
--
1.7.10.4
2014-07-05 21:20 GMT+08:00 Beniamino Galvani <[email protected]>:
> act8865_pdata_from_dt() populates the array pdata->regulators with all
> the regulators and then assigns the field init_data only for the ones
> actually found in the DT.
>
> The patch changes the value assigned to pdata->num_regulators to match
> the size of the array.
>
> Signed-off-by: Beniamino Galvani <[email protected]>
> Tested-by: Wenyou Yang <[email protected]>
> ---
> drivers/regulator/act8865-regulator.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
> index f07be36..52d1b6c 100644
> --- a/drivers/regulator/act8865-regulator.c
> +++ b/drivers/regulator/act8865-regulator.c
> @@ -230,7 +230,7 @@ static int act8865_pdata_from_dt(struct device *dev,
> if (!pdata->regulators)
> return -ENOMEM;
>
> - pdata->num_regulators = matched;
> + pdata->num_regulators = ARRAY_SIZE(act8865_matches);
> regulator = pdata->regulators;
You can also include below change as well:
diff --git a/drivers/regulator/act8865-regulator.c
b/drivers/regulator/act8865-regulator.c
index f07be36..9fcedc5 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -226,7 +226,7 @@ static int act8865_pdata_from_dt(struct device *dev,
pdata->regulators = devm_kzalloc(dev,
sizeof(struct act8865_regulator_data) *
- ARRAY_SIZE(act8865_matches), GFP_KERNEL);
+ matched, GFP_KERNEL);
if (!pdata->regulators)
return -ENOMEM;
2014-07-05 23:08 GMT+08:00 Axel Lin <[email protected]>:
> 2014-07-05 21:20 GMT+08:00 Beniamino Galvani <[email protected]>:
>> act8865_pdata_from_dt() populates the array pdata->regulators with all
>> the regulators and then assigns the field init_data only for the ones
>> actually found in the DT.
>>
>> The patch changes the value assigned to pdata->num_regulators to match
>> the size of the array.
>>
>> Signed-off-by: Beniamino Galvani <[email protected]>
>> Tested-by: Wenyou Yang <[email protected]>
>> ---
>> drivers/regulator/act8865-regulator.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
>> index f07be36..52d1b6c 100644
>> --- a/drivers/regulator/act8865-regulator.c
>> +++ b/drivers/regulator/act8865-regulator.c
>> @@ -230,7 +230,7 @@ static int act8865_pdata_from_dt(struct device *dev,
>> if (!pdata->regulators)
>> return -ENOMEM;
>>
>> - pdata->num_regulators = matched;
>> + pdata->num_regulators = ARRAY_SIZE(act8865_matches);
>> regulator = pdata->regulators;
>
> You can also include below change as well:
> diff --git a/drivers/regulator/act8865-regulator.c
> b/drivers/regulator/act8865-regulator.c
> index f07be36..9fcedc5 100644
> --- a/drivers/regulator/act8865-regulator.c
> +++ b/drivers/regulator/act8865-regulator.c
> @@ -226,7 +226,7 @@ static int act8865_pdata_from_dt(struct device *dev,
>
> pdata->regulators = devm_kzalloc(dev,
> sizeof(struct act8865_regulator_data) *
> - ARRAY_SIZE(act8865_matches), GFP_KERNEL);
> + matched, GFP_KERNEL);
> if (!pdata->regulators)
> return -ENOMEM;
Ah.. I misread the code, please forget above comment.
Reviewed-by: Axel Lin <[email protected]>
Axel
2014-07-05 21:20 GMT+08:00 Beniamino Galvani <[email protected]>:
> This patch prepares support for other devices in the act88xx family of
> PMUs manufactured by Active-Semi.
>
> http://www.active-semi.com/products/power-management-units/act88xx/
>
> Signed-off-by: Beniamino Galvani <[email protected]>
> Tested-by: Wenyou Yang <[email protected]>
For this serial, Reviewed-by: Axel Lin <[email protected]>
patch 3/4 was not CCed to me, but I have checked the code on LKML mail list.
Regards,
Axel
On Sat, Jul 05, 2014 at 11:41:26PM +0800, Axel Lin wrote:
> 2014-07-05 21:20 GMT+08:00 Beniamino Galvani <[email protected]>:
> > This patch prepares support for other devices in the act88xx family of
> > PMUs manufactured by Active-Semi.
> >
> > http://www.active-semi.com/products/power-management-units/act88xx/
> >
> > Signed-off-by: Beniamino Galvani <[email protected]>
> > Tested-by: Wenyou Yang <[email protected]>
>
> For this serial, Reviewed-by: Axel Lin <[email protected]>
Thanks!
Beniamino