In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call mpt3sas_base_detach rather than
scsi_remove_host to properly clean up in reverse order.
In _scsih_remove, call scsi_remove_host earlier to clean up in reverse order.
Signed-off-by: Robert Elliott <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Nagalakshmi Nandigama <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 25 ++++++++++++-------------
2 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index b4b391d..20e2ff8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -281,7 +281,7 @@ mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
ioc->fault_reset_work_q = NULL;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
if (wq) {
- if (!cancel_delayed_work(&ioc->fault_reset_work))
+ if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
flush_workqueue(wq);
destroy_workqueue(wq);
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index ed8b6c1..53c4764 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2906,11 +2906,10 @@ _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc)
return;
list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
- if (cancel_delayed_work(&fw_event->delayed_work)) {
+ if (cancel_delayed_work_sync(&fw_event->delayed_work)) {
_scsih_fw_event_free(ioc, fw_event);
continue;
}
- fw_event->cancel_pending_work = 1;
}
}
@@ -7514,7 +7513,7 @@ _firmware_event_work(struct work_struct *work)
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
/* the queue is being flushed so ignore this event */
- if (ioc->remove_host || fw_event->cancel_pending_work ||
+ if (ioc->remove_host ||
ioc->pci_error_recovery) {
_scsih_fw_event_free(ioc, fw_event);
return;
@@ -7970,9 +7969,9 @@ _scsih_remove(struct pci_dev *pdev)
}
sas_remove_host(shost);
+ scsi_remove_host(shost);
mpt2sas_base_detach(ioc);
list_del(&ioc->list);
- scsi_remove_host(shost);
scsi_host_put(shost);
}
@@ -8313,13 +8312,6 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
}
- if ((scsi_add_host(shost, &pdev->dev))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- list_del(&ioc->list);
- goto out_add_shost_fail;
- }
-
/* register EEDP capabilities with SCSI layer */
if (prot_mask)
scsi_host_set_prot(shost, prot_mask);
@@ -8361,16 +8353,23 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
} else
ioc->hide_drives = 0;
+
+ if ((scsi_add_host(shost, &pdev->dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out_add_shost_fail;
+ }
+
scsi_scan_host(shost);
return 0;
+ out_add_shost_fail:
+ mpt2sas_base_detach(ioc);
out_attach_fail:
destroy_workqueue(ioc->firmware_event_thread);
out_thread_fail:
list_del(&ioc->list);
- scsi_remove_host(shost);
- out_add_shost_fail:
scsi_host_put(shost);
return -ENODEV;
}
--
1.7.1