From: Opensource [Steve Twiss] <[email protected]>
Add register definitions for DA9063 AD (0x3) silicon variant ID
and Kconfig support to choose the silicon variant at compile time.
This patch also adds RTC support for the AD silicon changes.
It adds AD support as a compile-time flag under a new menu item in
Kconfig called 'Support DA9063 AD silicon variant ID'. This allows
the user to choose AD support, or to leave blank and choose support
for the newer silicon variant ID, but not both at the same time.
This extra option for supporting AD will only appear if the main 'Dialog
Semiconductor DA9063 PMIC Support' option is chosen. The AD support
boolean will be defaulted to false (unchecked) until the user
modifies it. This means that AD support is not turned on by default.
The DA9063 probe function has been modified to use the compile time
directive CONFIG_MFD_DA9063_AD. This configuration option will allow
AD support only if this boolean is true, otherwise it will default to
support BB (or greater) silicon.
Signed-off-by: Opensource [Steve Twiss] <[email protected]>
---
Checks performed with linux-next/v3.16-rc5/scripts/checkpatch.pl
rtc-da9063.c total: 0 errors, 0 warnings, 367 lines checked
da9063-core.c total: 0 errors, 0 warnings, 198 lines checked
Kconfig total: 0 errors, 41 warnings, 1285 lines checked
core.h total: 0 errors, 0 warnings, 98 lines checked
registers.h total: 0 errors, 0 warnings, 1086 lines checked
This patch adds DA9063 registers for silicon variant ID corresponding
to AD (0x3) and adds RTC support for these register changes.
The requirement add the AD register map back into the Linux kernel
in order to support existing hardware was foreseen as a possible
future change:
https://lkml.org/lkml/2014/2/14/455
This patch applies against linux-next and v3.16-rc5
Regards,
Steve Twiss, Dialog Semiconductor Ltd.
drivers/mfd/Kconfig | 10 +++++++
drivers/mfd/da9063-core.c | 16 ++++++++--
drivers/rtc/rtc-da9063.c | 36 ++++++++++++++++++++++-
include/linux/mfd/da9063/core.h | 3 +-
include/linux/mfd/da9063/registers.h | 54 ++++++++++++++++++++++++++++++++++
5 files changed, 114 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6cc4b6a..7a86563 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -183,6 +183,16 @@ config MFD_DA9063
Additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_DA9063_AD
+ bool "Support DA9063 AD silicon variant ID"
+ depends on MFD_DA9063
+ help
+ This configures the DA9063 PMIC driver for use with AD silicon
+ variant ID. Saying yes here will remove the driver support for new
+ silicon variant IDs.
+
+ Say N unless you know exactly what you are doing.
+
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index e70ae31..07b54ef 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -153,11 +153,21 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
- if (variant_code != PMIC_DA9063_BB) {
- dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
- variant_code);
+#ifdef CONFIG_MFD_DA9063_AD
+ if (variant_code != PMIC_DA9063_AD) {
+ dev_err(da9063->dev,
+ "Only AD (0x3) silicon is supported in this configuration: 0x%02X\n",
+ variant_code);
return -ENODEV;
}
+#else
+ if (variant_code < PMIC_DA9063_BB) {
+ dev_err(da9063->dev,
+ "Cannot support variant code < BB (0x5): 0x%02X\n",
+ variant_code);
+ return -ENODEV;
+ }
+#endif
da9063->model = model;
da9063->variant_code = variant_code;
diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index 5953930..66c3073 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -29,6 +29,10 @@
#define YEARS_FROM_DA9063(year) ((year) + 100)
#define MONTHS_FROM_DA9063(month) ((month) - 1)
+#ifdef CONFIG_MFD_DA9063_AD
+#define RTC_ALARM_DATA_LEN (DA9063_REG_ALARM_Y - DA9063_REG_ALARM_MI + 1)
+#endif
+
#define RTC_DATA_LEN (DA9063_REG_COUNT_Y - DA9063_REG_COUNT_S + 1)
#define RTC_SEC 0
#define RTC_MIN 1
@@ -151,8 +155,14 @@ static int da9063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
int ret;
unsigned int val;
+#ifdef CONFIG_MFD_DA9063_AD
+ data[RTC_SEC] = 0;
+ ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_MI,
+ &data[RTC_MIN], RTC_ALARM_DATA_LEN);
+#else
ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_S,
&data[RTC_SEC], RTC_DATA_LEN);
+#endif
if (ret < 0)
return ret;
@@ -186,14 +196,20 @@ static int da9063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return ret;
}
+#ifdef CONFIG_MFD_DA9063_AD
+ data[RTC_SEC] = 0;
+ ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_MI,
+ &data[RTC_MIN], RTC_ALARM_DATA_LEN);
+#else
ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_S,
data, RTC_DATA_LEN);
+#endif
if (ret < 0) {
dev_err(dev, "Failed to write alarm: %d\n", ret);
return ret;
}
- rtc->alarm_time = alrm->time;
+ da9063_data_to_tm(data, &rtc->alarm_time);
if (alrm->enabled) {
ret = da9063_rtc_start_alarm(dev);
@@ -257,17 +273,29 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
+#ifdef CONFIG_MFD_DA9063_AD
+ ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI,
+ DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM,
+ 0);
+#else
ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM,
0);
+#endif
if (ret < 0) {
dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
goto err;
}
+#ifdef CONFIG_MFD_DA9063_AD
+ ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI,
+ DA9063_ALARM_STATUS_ALARM,
+ DA9063_ALARM_STATUS_ALARM);
+#else
ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
DA9063_ALARM_STATUS_ALARM,
DA9063_ALARM_STATUS_ALARM);
+#endif
if (ret < 0) {
dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
goto err;
@@ -280,8 +308,14 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
+#ifdef CONFIG_MFD_DA9063_AD
+ data[RTC_SEC] = 0;
+ ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_MI,
+ &data[RTC_MIN], RTC_ALARM_DATA_LEN);
+#else
ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_S,
data, RTC_DATA_LEN);
+#endif
if (ret < 0) {
dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
ret);
diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
index 00a9aac..b92a326 100644
--- a/include/linux/mfd/da9063/core.h
+++ b/include/linux/mfd/da9063/core.h
@@ -34,7 +34,8 @@ enum da9063_models {
};
enum da9063_variant_codes {
- PMIC_DA9063_BB = 0x5
+ PMIC_DA9063_AD = 0x3,
+ PMIC_DA9063_BB = 0x5,
};
/* Interrupts */
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index 09a85c6..e5201f9 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -104,6 +104,18 @@
#define DA9063_REG_COUNT_D 0x43
#define DA9063_REG_COUNT_MO 0x44
#define DA9063_REG_COUNT_Y 0x45
+
+#ifdef CONFIG_MFD_DA9063_AD
+#define DA9063_REG_ALARM_MI 0x46
+#define DA9063_REG_ALARM_H 0x47
+#define DA9063_REG_ALARM_D 0x48
+#define DA9063_REG_ALARM_MO 0x49
+#define DA9063_REG_ALARM_Y 0x4A
+#define DA9063_REG_SECOND_A 0x4B
+#define DA9063_REG_SECOND_B 0x4C
+#define DA9063_REG_SECOND_C 0x4D
+#define DA9063_REG_SECOND_D 0x4E
+#else
#define DA9063_REG_ALARM_S 0x46
#define DA9063_REG_ALARM_MI 0x47
#define DA9063_REG_ALARM_H 0x48
@@ -114,6 +126,7 @@
#define DA9063_REG_SECOND_B 0x4D
#define DA9063_REG_SECOND_C 0x4E
#define DA9063_REG_SECOND_D 0x4F
+#endif
/* Sequencer Control Registers */
#define DA9063_REG_SEQ 0x81
@@ -223,6 +236,38 @@
#define DA9063_REG_CONFIG_J 0x10F
#define DA9063_REG_CONFIG_K 0x110
#define DA9063_REG_CONFIG_L 0x111
+
+#ifdef CONFIG_MFD_DA9063_AD
+#define DA9063_REG_MON_REG_1 0x112
+#define DA9063_REG_MON_REG_2 0x113
+#define DA9063_REG_MON_REG_3 0x114
+#define DA9063_REG_MON_REG_4 0x115
+#define DA9063_REG_MON_REG_5 0x116
+#define DA9063_REG_MON_REG_6 0x117
+#define DA9063_REG_TRIM_CLDR 0x118
+
+/* General Purpose Registers */
+#define DA9063_REG_GP_ID_0 0x119
+#define DA9063_REG_GP_ID_1 0x11A
+#define DA9063_REG_GP_ID_2 0x11B
+#define DA9063_REG_GP_ID_3 0x11C
+#define DA9063_REG_GP_ID_4 0x11D
+#define DA9063_REG_GP_ID_5 0x11E
+#define DA9063_REG_GP_ID_6 0x11F
+#define DA9063_REG_GP_ID_7 0x120
+#define DA9063_REG_GP_ID_8 0x121
+#define DA9063_REG_GP_ID_9 0x122
+#define DA9063_REG_GP_ID_10 0x123
+#define DA9063_REG_GP_ID_11 0x124
+#define DA9063_REG_GP_ID_12 0x125
+#define DA9063_REG_GP_ID_13 0x126
+#define DA9063_REG_GP_ID_14 0x127
+#define DA9063_REG_GP_ID_15 0x128
+#define DA9063_REG_GP_ID_16 0x129
+#define DA9063_REG_GP_ID_17 0x12A
+#define DA9063_REG_GP_ID_18 0x12B
+#define DA9063_REG_GP_ID_19 0x12C
+#else
#define DA9063_REG_CONFIG_M 0x112
#define DA9063_REG_CONFIG_N 0x113
@@ -254,6 +299,7 @@
#define DA9063_REG_GP_ID_17 0x132
#define DA9063_REG_GP_ID_18 0x133
#define DA9063_REG_GP_ID_19 0x134
+#endif
/* Chip ID and variant */
#define DA9063_REG_CHIP_ID 0x181
@@ -404,10 +450,14 @@
/* DA9063_REG_CONTROL_B (addr=0x0F) */
#define DA9063_CHG_SEL 0x01
#define DA9063_WATCHDOG_PD 0x02
+#ifndef CONFIG_MFD_DA9063_AD
#define DA9063_RESET_BLINKING 0x04
+#endif
#define DA9063_NRES_MODE 0x08
#define DA9063_NONKEY_LOCK 0x10
+#ifndef CONFIG_MFD_DA9063_AD
#define DA9063_BUCK_SLOWSTART 0x80
+#endif
/* DA9063_REG_CONTROL_C (addr=0x10) */
#define DA9063_DEBOUNCING_MASK 0x07
@@ -467,7 +517,9 @@
#define DA9063_GPADC_PAUSE 0x02
#define DA9063_PMIF_DIS 0x04
#define DA9063_HS2WIRE_DIS 0x08
+#ifndef CONFIG_MFD_DA9063_AD
#define DA9063_CLDR_PAUSE 0x10
+#endif
#define DA9063_BBAT_DIS 0x20
#define DA9063_OUT_32K_PAUSE 0x40
#define DA9063_PMCONT_DIS 0x80
@@ -843,8 +895,10 @@
#define DA9063_COUNT_YEAR_MASK 0x3F
#define DA9063_MONITOR 0x40
+#ifndef CONFIG_MFD_DA9063_AD
/* DA9063_REG_ALARM_S (addr=0x46) */
#define DA9063_ALARM_S_MASK 0x3F
+#endif
#define DA9063_ALARM_STATUS_ALARM 0x80
#define DA9063_ALARM_STATUS_TICK 0x40
/* DA9063_REG_ALARM_MI (addr=0x47) */
--
end-of-patch for RFC V1
On Wed, 16 Jul 2014 17:39:20 +0100
"Opensource [Steve Twiss]" <[email protected]> wrote:
> The DA9063 probe function has been modified to use the compile time
> directive CONFIG_MFD_DA9063_AD. This configuration option will allow
> AD support only if this boolean is true, otherwise it will default to
> support BB (or greater) silicon.
any particular reason for not supporting both at the same time,
either with a module option, platform data, dt, etc ?
--
Best regards,
Alessandro Zummo,
Tower Technologies - Torino, Italy
http://www.towertech.it
On 16 July 2014 18:27 Alessandro Zummo wrote:
>From: Alessandro Zummo [mailto:[email protected]]
>Sent: 16 July 2014 18:27
>To: Opensource [Steve Twiss]
>Cc: Andrew Morton; LINUX-KERNEL; Lee Jones; RTC-LINUX; Samuel Ortiz; David
>Dajun Chen; Mark Brown; Philipp Zabel; Support Opensource
>Subject: Re: [RFC V1] mfd: da9063: Add support for AD silicon variant
>
>On Wed, 16 Jul 2014 17:39:20 +0100
>"Opensource [Steve Twiss]" <[email protected]> wrote:
>
>> The DA9063 probe function has been modified to use the compile time
>> directive CONFIG_MFD_DA9063_AD. This configuration option will allow
>> AD support only if this boolean is true, otherwise it will default to
>> support BB (or greater) silicon.
>
> any particular reason for not supporting both at the same time,
> either with a module option, platform data, dt, etc ?
Hi Alessandro,
If run-time distinction between AD and BB is used this makes the change
bigger, more complicated and difficult to understand.
These problems were discussed in a previous posting back in February
https://lkml.org/lkml/2014/2/16/29
This change is just a supporting option for people who have the older AD silicon
in their hardware.
Regards,
Steve
>
>--
>
> Best regards,
>
> Alessandro Zummo,
> Tower Technologies - Torino, Italy
>
> http://www.towertech.it
Am Mittwoch, den 16.07.2014, 17:39 +0100 schrieb Opensource [Steve
Twiss]:
> From: Opensource [Steve Twiss] <[email protected]>
>
> Add register definitions for DA9063 AD (0x3) silicon variant ID
> and Kconfig support to choose the silicon variant at compile time.
> This patch also adds RTC support for the AD silicon changes.
>
> It adds AD support as a compile-time flag under a new menu item in
> Kconfig called 'Support DA9063 AD silicon variant ID'. This allows
> the user to choose AD support, or to leave blank and choose support
> for the newer silicon variant ID, but not both at the same time.
I second Alessandro's concern. I don't like peppering drivers with
#ifdefs.
If we get the readable/writeable/volatile register handling in
da9063-i2c sorted out, supporting both variants with the same kernel
should be possible.
How about something like this (on top of your patch):
---
drivers/mfd/Kconfig | 10 --
drivers/mfd/da9063-core.c | 11 +--
drivers/mfd/da9063-i2c.c | 146 +++++++++++++++++++++++-----
drivers/rtc/rtc-da9063.c | 79 +++++++---------
include/linux/mfd/da9063/registers.h | 178 ++++++++++++++++-------------------
5 files changed, 237 insertions(+), 187 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 7a86563..6cc4b6a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -183,16 +183,6 @@ config MFD_DA9063
Additional drivers must be enabled in order to use the functionality
of the device.
-config MFD_DA9063_AD
- bool "Support DA9063 AD silicon variant ID"
- depends on MFD_DA9063
- help
- This configures the DA9063 PMIC driver for use with AD silicon
- variant ID. Saying yes here will remove the driver support for new
- silicon variant IDs.
-
- Say N unless you know exactly what you are doing.
-
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 07b54ef..56b2dc4 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -153,21 +153,12 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
-#ifdef CONFIG_MFD_DA9063_AD
- if (variant_code != PMIC_DA9063_AD) {
- dev_err(da9063->dev,
- "Only AD (0x3) silicon is supported in this configuration: 0x%02X\n",
- variant_code);
- return -ENODEV;
- }
-#else
- if (variant_code < PMIC_DA9063_BB) {
+ if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) {
dev_err(da9063->dev,
"Cannot support variant code < BB (0x5): 0x%02X\n",
variant_code);
return -ENODEV;
}
-#endif
da9063->model = model;
da9063->variant_code = variant_code;
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
index 0c0e295..250f868 100644
--- a/drivers/mfd/da9063-i2c.c
+++ b/drivers/mfd/da9063-i2c.c
@@ -25,10 +25,10 @@
#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
-static const struct regmap_range da9063_readable_ranges[] = {
+static const struct regmap_range da9063_ad_readable_ranges[] = {
{
.range_min = DA9063_REG_PAGE_CON,
- .range_max = DA9063_REG_SECOND_D,
+ .range_max = DA9063_AD_REG_SECOND_D,
}, {
.range_min = DA9063_REG_SEQ,
.range_max = DA9063_REG_ID_32_31,
@@ -37,14 +37,14 @@ static const struct regmap_range da9063_readable_ranges[] = {
.range_max = DA9063_REG_AUTO3_LOW,
}, {
.range_min = DA9063_REG_T_OFFSET,
- .range_max = DA9063_REG_GP_ID_19,
+ .range_max = DA9063_AD_REG_GP_ID_19,
}, {
.range_min = DA9063_REG_CHIP_ID,
.range_max = DA9063_REG_CHIP_VARIANT,
},
};
-static const struct regmap_range da9063_writeable_ranges[] = {
+static const struct regmap_range da9063_ad_writeable_ranges[] = {
{
.range_min = DA9063_REG_PAGE_CON,
.range_max = DA9063_REG_PAGE_CON,
@@ -53,7 +53,7 @@ static const struct regmap_range da9063_writeable_ranges[] = {
.range_max = DA9063_REG_VSYS_MON,
}, {
.range_min = DA9063_REG_COUNT_S,
- .range_max = DA9063_REG_ALARM_Y,
+ .range_max = DA9063_AD_REG_ALARM_Y,
}, {
.range_min = DA9063_REG_SEQ,
.range_max = DA9063_REG_ID_32_31,
@@ -62,14 +62,14 @@ static const struct regmap_range da9063_writeable_ranges[] = {
.range_max = DA9063_REG_AUTO3_LOW,
}, {
.range_min = DA9063_REG_CONFIG_I,
- .range_max = DA9063_REG_MON_REG_4,
+ .range_max = DA9063_AD_REG_MON_REG_4,
}, {
- .range_min = DA9063_REG_GP_ID_0,
- .range_max = DA9063_REG_GP_ID_19,
+ .range_min = DA9063_AD_REG_GP_ID_0,
+ .range_max = DA9063_AD_REG_GP_ID_19,
},
};
-static const struct regmap_range da9063_volatile_ranges[] = {
+static const struct regmap_range da9063_ad_volatile_ranges[] = {
{
.range_min = DA9063_REG_STATUS_A,
.range_max = DA9063_REG_EVENT_D,
@@ -81,26 +81,104 @@ static const struct regmap_range da9063_volatile_ranges[] = {
.range_max = DA9063_REG_ADC_MAN,
}, {
.range_min = DA9063_REG_ADC_RES_L,
- .range_max = DA9063_REG_SECOND_D,
+ .range_max = DA9063_AD_REG_SECOND_D,
}, {
- .range_min = DA9063_REG_MON_REG_5,
- .range_max = DA9063_REG_MON_REG_6,
+ .range_min = DA9063_AD_REG_MON_REG_5,
+ .range_max = DA9063_AD_REG_MON_REG_6,
},
};
-static const struct regmap_access_table da9063_readable_table = {
- .yes_ranges = da9063_readable_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_readable_ranges),
+static const struct regmap_access_table da9063_ad_readable_table = {
+ .yes_ranges = da9063_ad_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_readable_ranges),
};
-static const struct regmap_access_table da9063_writeable_table = {
- .yes_ranges = da9063_writeable_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_writeable_ranges),
+static const struct regmap_access_table da9063_ad_writeable_table = {
+ .yes_ranges = da9063_ad_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_writeable_ranges),
};
-static const struct regmap_access_table da9063_volatile_table = {
- .yes_ranges = da9063_volatile_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_volatile_ranges),
+static const struct regmap_access_table da9063_ad_volatile_table = {
+ .yes_ranges = da9063_ad_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_volatile_ranges),
+};
+
+static const struct regmap_range da9063_bb_readable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_BB_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_T_OFFSET,
+ .range_max = DA9063_BB_REG_GP_ID_19,
+ }, {
+ .range_min = DA9063_REG_CHIP_ID,
+ .range_max = DA9063_REG_CHIP_VARIANT,
+ },
+};
+
+static const struct regmap_range da9063_bb_writeable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_REG_PAGE_CON,
+ }, {
+ .range_min = DA9063_REG_FAULT_LOG,
+ .range_max = DA9063_REG_VSYS_MON,
+ }, {
+ .range_min = DA9063_REG_COUNT_S,
+ .range_max = DA9063_BB_REG_ALARM_Y,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_CONFIG_I,
+ .range_max = DA9063_BB_REG_MON_REG_4,
+ }, {
+ .range_min = DA9063_BB_REG_GP_ID_0,
+ .range_max = DA9063_BB_REG_GP_ID_19,
+ },
+};
+
+static const struct regmap_range da9063_bb_volatile_ranges[] = {
+ {
+ .range_min = DA9063_REG_STATUS_A,
+ .range_max = DA9063_REG_EVENT_D,
+ }, {
+ .range_min = DA9063_REG_CONTROL_F,
+ .range_max = DA9063_REG_CONTROL_F,
+ }, {
+ .range_min = DA9063_REG_ADC_MAN,
+ .range_max = DA9063_REG_ADC_MAN,
+ }, {
+ .range_min = DA9063_REG_ADC_RES_L,
+ .range_max = DA9063_BB_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_BB_REG_MON_REG_5,
+ .range_max = DA9063_BB_REG_MON_REG_6,
+ },
+};
+
+static const struct regmap_access_table da9063_bb_readable_table = {
+ .yes_ranges = da9063_bb_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_readable_ranges),
+};
+
+static const struct regmap_access_table da9063_bb_writeable_table = {
+ .yes_ranges = da9063_bb_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_writeable_ranges),
+};
+
+static const struct regmap_access_table da9063_bb_volatile_table = {
+ .yes_ranges = da9063_bb_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_volatile_ranges),
};
static const struct regmap_range_cfg da9063_range_cfg[] = {
@@ -123,10 +201,6 @@ static struct regmap_config da9063_regmap_config = {
.max_register = DA9063_REG_CHIP_VARIANT,
.cache_type = REGCACHE_RBTREE,
-
- .rd_table = &da9063_readable_table,
- .wr_table = &da9063_writeable_table,
- .volatile_table = &da9063_volatile_table,
};
static int da9063_i2c_probe(struct i2c_client *i2c,
@@ -143,7 +217,7 @@ static int da9063_i2c_probe(struct i2c_client *i2c,
da9063->dev = &i2c->dev;
da9063->chip_irq = i2c->irq;
- da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config);
+ da9063->regmap = regmap_init_i2c(i2c, &da9063_regmap_config);
if (IS_ERR(da9063->regmap)) {
ret = PTR_ERR(da9063->regmap);
dev_err(da9063->dev, "Failed to allocate register map: %d\n",
@@ -152,9 +226,29 @@ static int da9063_i2c_probe(struct i2c_client *i2c,
}
ret = da9063_device_init(da9063, i2c->irq);
+ regmap_exit(da9063->regmap);
if (ret)
return ret;
+
+ if (da9063->variant_code == PMIC_DA9063_AD) {
+ da9063_regmap_config.rd_table = &da9063_ad_readable_table;
+ da9063_regmap_config.wr_table = &da9063_ad_writeable_table;
+ da9063_regmap_config.volatile_table = &da9063_ad_volatile_table;
+ } else {
+ da9063_regmap_config.rd_table = &da9063_bb_readable_table;
+ da9063_regmap_config.wr_table = &da9063_bb_writeable_table;
+ da9063_regmap_config.volatile_table = &da9063_bb_volatile_table;
+ }
+
+ da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config);
+ if (IS_ERR(da9063->regmap)) {
+ ret = PTR_ERR(da9063->regmap);
+ dev_err(da9063->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
/*
* Disabling bit BIT(6) in the CONFIG_J register supposedly disables
* the SMBus timeout feature or switches the chip to I2C mode.
diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index 66c3073..815f756 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -29,9 +29,7 @@
#define YEARS_FROM_DA9063(year) ((year) + 100)
#define MONTHS_FROM_DA9063(month) ((month) - 1)
-#ifdef CONFIG_MFD_DA9063_AD
-#define RTC_ALARM_DATA_LEN (DA9063_REG_ALARM_Y - DA9063_REG_ALARM_MI + 1)
-#endif
+#define RTC_ALARM_DATA_LEN (DA9063_AD_REG_ALARM_Y - DA9063_AD_REG_ALARM_MI + 1)
#define RTC_DATA_LEN (DA9063_REG_COUNT_Y - DA9063_REG_COUNT_S + 1)
#define RTC_SEC 0
@@ -46,6 +44,10 @@ struct da9063_rtc {
struct da9063 *hw;
struct rtc_time alarm_time;
bool rtc_sync;
+ int alarm_year;
+ int alarm_start;
+ int alarm_len;
+ int data_start;
};
static void da9063_data_to_tm(u8 *data, struct rtc_time *tm)
@@ -87,7 +89,7 @@ static int da9063_rtc_stop_alarm(struct device *dev)
{
struct da9063_rtc *rtc = dev_get_drvdata(dev);
- return regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ return regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, 0);
}
@@ -95,7 +97,7 @@ static int da9063_rtc_start_alarm(struct device *dev)
{
struct da9063_rtc *rtc = dev_get_drvdata(dev);
- return regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ return regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, DA9063_ALARM_ON);
}
@@ -155,14 +157,9 @@ static int da9063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
int ret;
unsigned int val;
-#ifdef CONFIG_MFD_DA9063_AD
data[RTC_SEC] = 0;
- ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_MI,
- &data[RTC_MIN], RTC_ALARM_DATA_LEN);
-#else
- ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_S,
- &data[RTC_SEC], RTC_DATA_LEN);
-#endif
+ ret = regmap_bulk_read(rtc->hw->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0)
return ret;
@@ -196,14 +193,9 @@ static int da9063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return ret;
}
-#ifdef CONFIG_MFD_DA9063_AD
data[RTC_SEC] = 0;
- ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_MI,
- &data[RTC_MIN], RTC_ALARM_DATA_LEN);
-#else
- ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_S,
- data, RTC_DATA_LEN);
-#endif
+ ret = regmap_bulk_read(rtc->hw->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0) {
dev_err(dev, "Failed to write alarm: %d\n", ret);
return ret;
@@ -234,7 +226,7 @@ static irqreturn_t da9063_alarm_event(int irq, void *data)
{
struct da9063_rtc *rtc = data;
- regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, 0);
rtc->rtc_sync = true;
@@ -273,59 +265,54 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
-#ifdef CONFIG_MFD_DA9063_AD
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI,
- DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM,
- 0);
-#else
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ if (da9063->variant_code == PMIC_DA9063_AD) {
+ rtc->alarm_year = DA9063_AD_REG_ALARM_Y;
+ rtc->alarm_start = DA9063_AD_REG_ALARM_MI;
+ rtc->alarm_len = RTC_ALARM_DATA_LEN;
+ rtc->data_start = RTC_MIN;
+ } else {
+ rtc->alarm_year = DA9063_BB_REG_ALARM_Y;
+ rtc->alarm_start = DA9063_BB_REG_ALARM_S;
+ rtc->alarm_len = RTC_DATA_LEN;
+ rtc->data_start = RTC_SEC;
+ }
+
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_start,
DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM,
0);
-#endif
if (ret < 0) {
dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
goto err;
}
-#ifdef CONFIG_MFD_DA9063_AD
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI,
- DA9063_ALARM_STATUS_ALARM,
- DA9063_ALARM_STATUS_ALARM);
-#else
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_start,
DA9063_ALARM_STATUS_ALARM,
DA9063_ALARM_STATUS_ALARM);
-#endif
if (ret < 0) {
dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
goto err;
}
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_Y,
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_year,
DA9063_TICK_ON, 0);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to disable TICKs\n");
goto err;
}
-#ifdef CONFIG_MFD_DA9063_AD
data[RTC_SEC] = 0;
- ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_MI,
- &data[RTC_MIN], RTC_ALARM_DATA_LEN);
-#else
- ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_S,
- data, RTC_DATA_LEN);
-#endif
+ ret = regmap_bulk_read(da9063->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
ret);
goto err;
}
- rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
- if (!rtc)
- return -ENOMEM;
-
platform_set_drvdata(pdev, rtc);
irq_alarm = platform_get_irq_byname(pdev, "ALARM");
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index e5201f9..66deb1d 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -105,28 +105,26 @@
#define DA9063_REG_COUNT_MO 0x44
#define DA9063_REG_COUNT_Y 0x45
-#ifdef CONFIG_MFD_DA9063_AD
-#define DA9063_REG_ALARM_MI 0x46
-#define DA9063_REG_ALARM_H 0x47
-#define DA9063_REG_ALARM_D 0x48
-#define DA9063_REG_ALARM_MO 0x49
-#define DA9063_REG_ALARM_Y 0x4A
-#define DA9063_REG_SECOND_A 0x4B
-#define DA9063_REG_SECOND_B 0x4C
-#define DA9063_REG_SECOND_C 0x4D
-#define DA9063_REG_SECOND_D 0x4E
-#else
-#define DA9063_REG_ALARM_S 0x46
-#define DA9063_REG_ALARM_MI 0x47
-#define DA9063_REG_ALARM_H 0x48
-#define DA9063_REG_ALARM_D 0x49
-#define DA9063_REG_ALARM_MO 0x4A
-#define DA9063_REG_ALARM_Y 0x4B
-#define DA9063_REG_SECOND_A 0x4C
-#define DA9063_REG_SECOND_B 0x4D
-#define DA9063_REG_SECOND_C 0x4E
-#define DA9063_REG_SECOND_D 0x4F
-#endif
+#define DA9063_AD_REG_ALARM_MI 0x46
+#define DA9063_AD_REG_ALARM_H 0x47
+#define DA9063_AD_REG_ALARM_D 0x48
+#define DA9063_AD_REG_ALARM_MO 0x49
+#define DA9063_AD_REG_ALARM_Y 0x4A
+#define DA9063_AD_REG_SECOND_A 0x4B
+#define DA9063_AD_REG_SECOND_B 0x4C
+#define DA9063_AD_REG_SECOND_C 0x4D
+#define DA9063_AD_REG_SECOND_D 0x4E
+
+#define DA9063_BB_REG_ALARM_S 0x46
+#define DA9063_BB_REG_ALARM_MI 0x47
+#define DA9063_BB_REG_ALARM_H 0x48
+#define DA9063_BB_REG_ALARM_D 0x49
+#define DA9063_BB_REG_ALARM_MO 0x4A
+#define DA9063_BB_REG_ALARM_Y 0x4B
+#define DA9063_BB_REG_SECOND_A 0x4C
+#define DA9063_BB_REG_SECOND_B 0x4D
+#define DA9063_BB_REG_SECOND_C 0x4E
+#define DA9063_BB_REG_SECOND_D 0x4F
/* Sequencer Control Registers */
#define DA9063_REG_SEQ 0x81
@@ -237,69 +235,67 @@
#define DA9063_REG_CONFIG_K 0x110
#define DA9063_REG_CONFIG_L 0x111
-#ifdef CONFIG_MFD_DA9063_AD
-#define DA9063_REG_MON_REG_1 0x112
-#define DA9063_REG_MON_REG_2 0x113
-#define DA9063_REG_MON_REG_3 0x114
-#define DA9063_REG_MON_REG_4 0x115
-#define DA9063_REG_MON_REG_5 0x116
-#define DA9063_REG_MON_REG_6 0x117
-#define DA9063_REG_TRIM_CLDR 0x118
+#define DA9063_AD_REG_MON_REG_1 0x112
+#define DA9063_AD_REG_MON_REG_2 0x113
+#define DA9063_AD_REG_MON_REG_3 0x114
+#define DA9063_AD_REG_MON_REG_4 0x115
+#define DA9063_AD_REG_MON_REG_5 0x116
+#define DA9063_AD_REG_MON_REG_6 0x117
+#define DA9063_AD_REG_TRIM_CLDR 0x118
+
+#define DA9063_BB_REG_CONFIG_M 0x112
+#define DA9063_BB_REG_CONFIG_N 0x113
+
+#define DA9063_BB_REG_MON_REG_1 0x114
+#define DA9063_BB_REG_MON_REG_2 0x115
+#define DA9063_BB_REG_MON_REG_3 0x116
+#define DA9063_BB_REG_MON_REG_4 0x117
+#define DA9063_BB_REG_MON_REG_5 0x11E
+#define DA9063_BB_REG_MON_REG_6 0x11F
+#define DA9063_BB_REG_TRIM_CLDR 0x120
/* General Purpose Registers */
-#define DA9063_REG_GP_ID_0 0x119
-#define DA9063_REG_GP_ID_1 0x11A
-#define DA9063_REG_GP_ID_2 0x11B
-#define DA9063_REG_GP_ID_3 0x11C
-#define DA9063_REG_GP_ID_4 0x11D
-#define DA9063_REG_GP_ID_5 0x11E
-#define DA9063_REG_GP_ID_6 0x11F
-#define DA9063_REG_GP_ID_7 0x120
-#define DA9063_REG_GP_ID_8 0x121
-#define DA9063_REG_GP_ID_9 0x122
-#define DA9063_REG_GP_ID_10 0x123
-#define DA9063_REG_GP_ID_11 0x124
-#define DA9063_REG_GP_ID_12 0x125
-#define DA9063_REG_GP_ID_13 0x126
-#define DA9063_REG_GP_ID_14 0x127
-#define DA9063_REG_GP_ID_15 0x128
-#define DA9063_REG_GP_ID_16 0x129
-#define DA9063_REG_GP_ID_17 0x12A
-#define DA9063_REG_GP_ID_18 0x12B
-#define DA9063_REG_GP_ID_19 0x12C
-#else
-#define DA9063_REG_CONFIG_M 0x112
-#define DA9063_REG_CONFIG_N 0x113
-
-#define DA9063_REG_MON_REG_1 0x114
-#define DA9063_REG_MON_REG_2 0x115
-#define DA9063_REG_MON_REG_3 0x116
-#define DA9063_REG_MON_REG_4 0x117
-#define DA9063_REG_MON_REG_5 0x11E
-#define DA9063_REG_MON_REG_6 0x11F
-#define DA9063_REG_TRIM_CLDR 0x120
-/* General Purpose Registers */
-#define DA9063_REG_GP_ID_0 0x121
-#define DA9063_REG_GP_ID_1 0x122
-#define DA9063_REG_GP_ID_2 0x123
-#define DA9063_REG_GP_ID_3 0x124
-#define DA9063_REG_GP_ID_4 0x125
-#define DA9063_REG_GP_ID_5 0x126
-#define DA9063_REG_GP_ID_6 0x127
-#define DA9063_REG_GP_ID_7 0x128
-#define DA9063_REG_GP_ID_8 0x129
-#define DA9063_REG_GP_ID_9 0x12A
-#define DA9063_REG_GP_ID_10 0x12B
-#define DA9063_REG_GP_ID_11 0x12C
-#define DA9063_REG_GP_ID_12 0x12D
-#define DA9063_REG_GP_ID_13 0x12E
-#define DA9063_REG_GP_ID_14 0x12F
-#define DA9063_REG_GP_ID_15 0x130
-#define DA9063_REG_GP_ID_16 0x131
-#define DA9063_REG_GP_ID_17 0x132
-#define DA9063_REG_GP_ID_18 0x133
-#define DA9063_REG_GP_ID_19 0x134
-#endif
+#define DA9063_AD_REG_GP_ID_0 0x119
+#define DA9063_AD_REG_GP_ID_1 0x11A
+#define DA9063_AD_REG_GP_ID_2 0x11B
+#define DA9063_AD_REG_GP_ID_3 0x11C
+#define DA9063_AD_REG_GP_ID_4 0x11D
+#define DA9063_AD_REG_GP_ID_5 0x11E
+#define DA9063_AD_REG_GP_ID_6 0x11F
+#define DA9063_AD_REG_GP_ID_7 0x120
+#define DA9063_AD_REG_GP_ID_8 0x121
+#define DA9063_AD_REG_GP_ID_9 0x122
+#define DA9063_AD_REG_GP_ID_10 0x123
+#define DA9063_AD_REG_GP_ID_11 0x124
+#define DA9063_AD_REG_GP_ID_12 0x125
+#define DA9063_AD_REG_GP_ID_13 0x126
+#define DA9063_AD_REG_GP_ID_14 0x127
+#define DA9063_AD_REG_GP_ID_15 0x128
+#define DA9063_AD_REG_GP_ID_16 0x129
+#define DA9063_AD_REG_GP_ID_17 0x12A
+#define DA9063_AD_REG_GP_ID_18 0x12B
+#define DA9063_AD_REG_GP_ID_19 0x12C
+
+#define DA9063_BB_REG_GP_ID_0 0x121
+#define DA9063_BB_REG_GP_ID_1 0x122
+#define DA9063_BB_REG_GP_ID_2 0x123
+#define DA9063_BB_REG_GP_ID_3 0x124
+#define DA9063_BB_REG_GP_ID_4 0x125
+#define DA9063_BB_REG_GP_ID_5 0x126
+#define DA9063_BB_REG_GP_ID_6 0x127
+#define DA9063_BB_REG_GP_ID_7 0x128
+#define DA9063_BB_REG_GP_ID_8 0x129
+#define DA9063_BB_REG_GP_ID_9 0x12A
+#define DA9063_BB_REG_GP_ID_10 0x12B
+#define DA9063_BB_REG_GP_ID_11 0x12C
+#define DA9063_BB_REG_GP_ID_12 0x12D
+#define DA9063_BB_REG_GP_ID_13 0x12E
+#define DA9063_BB_REG_GP_ID_14 0x12F
+#define DA9063_BB_REG_GP_ID_15 0x130
+#define DA9063_BB_REG_GP_ID_16 0x131
+#define DA9063_BB_REG_GP_ID_17 0x132
+#define DA9063_BB_REG_GP_ID_18 0x133
+#define DA9063_BB_REG_GP_ID_19 0x134
/* Chip ID and variant */
#define DA9063_REG_CHIP_ID 0x181
@@ -450,14 +446,10 @@
/* DA9063_REG_CONTROL_B (addr=0x0F) */
#define DA9063_CHG_SEL 0x01
#define DA9063_WATCHDOG_PD 0x02
-#ifndef CONFIG_MFD_DA9063_AD
-#define DA9063_RESET_BLINKING 0x04
-#endif
+#define DA9063_BB_RESET_BLINKING 0x04
#define DA9063_NRES_MODE 0x08
#define DA9063_NONKEY_LOCK 0x10
-#ifndef CONFIG_MFD_DA9063_AD
-#define DA9063_BUCK_SLOWSTART 0x80
-#endif
+#define DA9063_BB_BUCK_SLOWSTART 0x80
/* DA9063_REG_CONTROL_C (addr=0x10) */
#define DA9063_DEBOUNCING_MASK 0x07
@@ -517,9 +509,7 @@
#define DA9063_GPADC_PAUSE 0x02
#define DA9063_PMIF_DIS 0x04
#define DA9063_HS2WIRE_DIS 0x08
-#ifndef CONFIG_MFD_DA9063_AD
-#define DA9063_CLDR_PAUSE 0x10
-#endif
+#define DA9063_BB_CLDR_PAUSE 0x10
#define DA9063_BBAT_DIS 0x20
#define DA9063_OUT_32K_PAUSE 0x40
#define DA9063_PMCONT_DIS 0x80
@@ -895,10 +885,8 @@
#define DA9063_COUNT_YEAR_MASK 0x3F
#define DA9063_MONITOR 0x40
-#ifndef CONFIG_MFD_DA9063_AD
/* DA9063_REG_ALARM_S (addr=0x46) */
-#define DA9063_ALARM_S_MASK 0x3F
-#endif
+#define DA9063_BB_ALARM_S_MASK 0x3F
#define DA9063_ALARM_STATUS_ALARM 0x80
#define DA9063_ALARM_STATUS_TICK 0x40
/* DA9063_REG_ALARM_MI (addr=0x47) */
regards
Philipp
On Wed, 16 Jul 2014, Opensource [Steve Twiss] wrote:
> From: Opensource [Steve Twiss] <[email protected]>
>
> Add register definitions for DA9063 AD (0x3) silicon variant ID
> and Kconfig support to choose the silicon variant at compile time.
> This patch also adds RTC support for the AD silicon changes.
>
> It adds AD support as a compile-time flag under a new menu item in
> Kconfig called 'Support DA9063 AD silicon variant ID'. This allows
> the user to choose AD support, or to leave blank and choose support
> for the newer silicon variant ID, but not both at the same time.
>
> This extra option for supporting AD will only appear if the main 'Dialog
> Semiconductor DA9063 PMIC Support' option is chosen. The AD support
> boolean will be defaulted to false (unchecked) until the user
> modifies it. This means that AD support is not turned on by default.
>
> The DA9063 probe function has been modified to use the compile time
> directive CONFIG_MFD_DA9063_AD. This configuration option will allow
> AD support only if this boolean is true, otherwise it will default to
> support BB (or greater) silicon.
>
>
> Signed-off-by: Opensource [Steve Twiss] <[email protected]>
> ---
[...]
> --- a/drivers/mfd/da9063-core.c
> +++ b/drivers/mfd/da9063-core.c
[...]
> - if (variant_code != PMIC_DA9063_BB) {
> - dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
> - variant_code);
> +#ifdef CONFIG_MFD_DA9063_AD
> + if (variant_code != PMIC_DA9063_AD) {
> + dev_err(da9063->dev,
> + "Only AD (0x3) silicon is supported in this configuration: 0x%02X\n",
> + variant_code);
> return -ENODEV;
> }
> +#else
> + if (variant_code < PMIC_DA9063_BB) {
> + dev_err(da9063->dev,
> + "Cannot support variant code < BB (0x5): 0x%02X\n",
> + variant_code);
> + return -ENODEV;
> + }
> +#endif
[...]
> diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
> index 5953930..66c3073 100644
> --- a/drivers/rtc/rtc-da9063.c
> +++ b/drivers/rtc/rtc-da9063.c
[...]
> +#ifdef CONFIG_MFD_DA9063_AD
> + data[RTC_SEC] = 0;
> + ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_MI,
> + &data[RTC_MIN], RTC_ALARM_DATA_LEN);
> +#else
> ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_S,
> &data[RTC_SEC], RTC_DATA_LEN);
> +#endif
This isn't how we normally do things. You need to create local
variables for the differences and populated them in a switch statement
based on variant ID.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog