A fairly low overhead debug tool that may be useful to anyone developing
a device driver that uses managed resources.
It allows limited inspection from userspace of managed resources currently
allocated to devices.
When building the kernel, setting flag DEVRES_DEBUGFS adds debug code that
causes a directory to be created in the debugfs file system which will
contain a file for each device that uses managed resources. When read,
this file returns some basic debug information about all the managed
resources currently allocated to that device.
It is possible to trivially identify resources such as GPIOs, IRQs and
memory allocated using devm_kmalloc() without the use of intrusive debug
tools.
Rob Jones (1):
Managed Devices devres_debugfs file system
Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
drivers/base/Kconfig | 18 ++
drivers/base/devres.c | 387 +++++++++++++++++++++++++
3 files changed, 545 insertions(+)
create mode 100644 Documentation/driver-model/devres-debugfs.txt
--
1.7.10.4
Reviewed-by: Ian Molton <[email protected]>
Suggested-by: Ben Dooks <[email protected]>
Signed-off-by: Rob Jones <[email protected]>
---
Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
drivers/base/Kconfig | 18 ++
drivers/base/devres.c | 387 +++++++++++++++++++++++++
3 files changed, 545 insertions(+)
create mode 100644 Documentation/driver-model/devres-debugfs.txt
diff --git a/Documentation/driver-model/devres-debugfs.txt b/Documentation/driver-model/devres-debugfs.txt
new file mode 100644
index 0000000..7004ebd
--- /dev/null
+++ b/Documentation/driver-model/devres-debugfs.txt
@@ -0,0 +1,140 @@
+
+Introduction
+============
+
+This document describes a file system that can be enabled to assist
+with the debugging of devices that use managed reources
+
+Outline of Operation
+====================
+
+Setting the flag DEVRES_DEBUGFS (depends on DEBUG_DEVRES) enables a
+debug facility for device managed resources. This takes the form of
+a directory in the debugfs file system which is a pseudo file system
+(typically mounted at /sys/kernel/debug) similar in concept to sysfs
+but with no restrictions on the format of the data read from a file.
+
+The directory (devres/) is created the first time a managed resource
+is allocated for any device.
+
+The first time a managed resource is allocated for a device, a file
+with the same name as the device is created in devres/.
+
+The file is read only and can be read by normal userspace utilities
+(such as cat).
+
+The data returned is in ASCII text format and has one header line for
+the device followed by one line per allocated resource.
+
+It is possible to seek to a given line within the file: position 0
+(zero) goes directly to the device line, position 1 goes to the first
+resource line and so on. Attempting to seek to a line that does not
+exist returns EOF.
+
+If opened and read sequentially, a file will initially give Line 0 (see
+below) and then each subsequent read will give a Resource Line until
+EOF. Note that the data may change on the fly (see Notes below).
+
+Data Format
+===========
+
+Device Line (Line 0)
+--------------------
+
+dev: <address> <name>
+
+There is a single space between each field.
+
+dev: = literal text identifying this as a device line.
+
+<address> = the address in kernel memory of the device data structure.
+The layout of "struct device" can be found in include/linux/device.h.
+This value is displayed in hexadecimal format using the "%p" format
+specifier and thus will vary in length depending on the word size of
+the kernel, e.g. 8 characters for a 32 bit kernel.
+
+<name> = the name of the device. This should be the same as the file
+name, it is included to facilitate identification when multiple
+devices are being listed. The length of this field can vary.
+
+Resource Line (Line 1 et seq.)
+------------------------------
+
+res: <address> <length> <data> <name>
+
+There is a single space between each field.
+
+res: = literal text identifying this as a resource line.
+
+<address> = the address in kernel memory of the resource data. The
+structure pointed to can vary depending on the type of resource.
+This field is encoded in hexadecimal format using the "%p" format
+specifier and thus will vary in length depending on the word size of
+the kernel, e.g. 8 characters for a 32 bit kernel.
+
+<length> = the length of the resource data. This field is encoded
+in decimal format, right justified, space filled and is always 9
+characters long.
+
+<data> = a hexadecimal display of the first 16 (or <length> if less)
+bytes of data starting for location <address>. If <length> is less
+than 16, this field is padded with spaces on the right to the full
+32 characters.
+
+<name> = a string indentifying the resource type. This is often a
+string containing the name of the function to be used to free the
+resource. Typical examples are "devm_kzalloc_release" which identifies
+a memory resource and "devm_gpio_release" which identifies a gpio
+resource. The length of this field can vary.
+
+Notes
+=====
+
+1. Once created, a file persists until the device is removed even
+ if all allocated resources are freed. This means that the existence
+ of the file is confirmation that at least one resource has been
+ allocated at some point, even if the device now has none allocated.
+
+2. Opening a file and holding it open will prevent the freeing up of
+ of the device - the final removal is held off until the file is
+ closed. Managed resources can still be freed if, say, a driver is
+ removed.
+
+3. Resources can, in principle, be allocated and freed on the fly so
+ it should not be assumed in general that seeking to a particular
+ resource line will always return the same resource. However, that is
+ a function of the device driver concerned and it may be a valid
+ assumption for some drivers, e.g. one that only allocates resources
+ during its .probe function.
+
+4. The device's list of resources is traversed from its base to the
+ requested item each time the file is read. During this scan resources
+ are spinlocked, which may have implications if resources can be
+ allocated during time critical code at the same time as a read is
+ taking place.
+
+5. A copy is taken of (up to) 16 bytes of resource data while the
+ spinlock (see note 4, above) is still in place and so can be relied
+ upon as an accurate snapshot at the time of the read but it must be
+ remembered that resources may change dynamically (see note 3, above)
+ so the memory may have changed subsequently.
+
+Sample Output
+=============
+
+root@arm:~# cat /sys/kernel/debug/devres/mmc0
+dev: ed980008 mmc0
+res: ed95a618 50 000000004884e8800001000039a695ed devm_kzalloc_release
+res: ed95cc58 4 02000000 devm_gpio_release
+res: ed95cc98 8 a2000000000098ed devm_irq_release
+root@arm:~#
+
+This shows three managed resources allocated to device "mmc0".
+
+1. A block of memory 50 bytes long (the first 16 byte are displayed).
+2. A GPIO.
+3. An IRQ.
+
+If 16 bytes of data is insufficient, you can try using other debugging
+tools to examine the data.
+
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 8fa8dea..6a2f125 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -177,6 +177,24 @@ config DEBUG_DEVRES
If you are unsure about this, Say N here.
+config DEVRES_DEBUGFS
+ bool "Managed device resources debugfs file system"
+ depends on DEBUG_DEVRES
+ help
+ This option enables a debugfs file system related to Managed
+ Resources. When a device allocates a managed resource, with
+ this option enabled, a read-only file with the same name as
+ the device is created in the file system. Reading this file
+ provides some basic debug information about the managed
+ resources allocated to the device.
+
+ The overhead caused by enabling this option is quite small.
+ Specifically, a small memory overhead for each device and a
+ small time overhead at each resource allocation and
+ de-allocation.
+
+ If you are unsure about this, Say N here.
+
config SYS_HYPERVISOR
bool
default n
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 5c88a27..41b6465 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -7,9 +7,13 @@
* This file is released under the GPLv2.
*/
+#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
#include "base.h"
@@ -58,6 +62,383 @@ static void devres_log(struct device *dev, struct devres_node *node,
#define devres_log(dev, node, op) do {} while (0)
#endif /* CONFIG_DEBUG_DEVRES */
+#ifdef CONFIG_DEVRES_DEBUGFS
+static const char * const devres_dbgfs_rootname = "devres";
+static struct dentry *devres_dbgfs_root;
+
+struct devres_dbgfs_link {
+ struct list_head list;
+ struct device *dev;
+ struct dentry *dp;
+};
+
+struct devres_dbgfs_private {
+ struct device *dev;
+ loff_t pos;
+ bool eof;
+};
+
+static struct devres_dbgfs_link *devres_dbgfs_lastused;
+static DEFINE_SPINLOCK(devres_dbgfs_lock);
+
+/**
+ * devres_dbgfs_seq_start - seq file iterator init for a devres debugfs file
+ * @s: pointer to seq file structure
+ * @pos: pointer to current file position.
+ *
+ * returns: pointer to private data fo use by devres_dbgfs_seq_next().
+ *
+ * Static debug function called when the user first reads from a device
+ * managed resources debugfs file. It initializes the file position in
+ * the private data structure and returns a pointer to a private structure
+ * for use by devres_dbgfs_seq_next().
+ */
+static void *devres_dbgfs_seq_start(struct seq_file *s, loff_t *pos)
+{
+ struct devres_dbgfs_private *priv = s->private;
+
+ priv->pos = *pos;
+ priv->eof = false;
+
+ return priv;
+}
+
+/**
+ * devres_dbgfs_seq_next - seq file iterator routine for a devres debugfs file
+ * @s: pointer to seq file structure
+ * @v: pointer to private data set up by devres_dbgfs_seq_next().
+ * @pos: pointer to current file position.
+ *
+ * Static debug function called when the user reads from a device managed
+ * resources debugfs file. It returns a pointer to a private structure used
+ * by devres_dbgfs_seq_next() and uppdates the file pointer.
+ */
+static void *devres_dbgfs_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ struct devres_dbgfs_private *priv = v;
+
+ if (priv->eof)
+ return NULL;
+
+ *pos = ++priv->pos;
+
+ return priv;
+}
+
+static void devres_dbgfs_seq_stop(struct seq_file *s, void *v)
+{
+}
+
+/**
+ * devres_dbgfs_seq_show - seq file output routine for a devres debugfs file
+ * @s: pointer to seq file structure
+ * @v: pointer to private data set up by devres_dbgfs_seq_next().
+ *
+ * Static debug function called when the user reads from a device managed
+ * resources debugfs file. It outputs to the user buffer using seq_file
+ * function seq_printf();
+ *
+ * This function locks devres_lock in the device structure.
+ */
+static int devres_dbgfs_seq_show(struct seq_file *s, void *v)
+{
+ struct devres_dbgfs_private *priv = v;
+ struct device *dev = priv->dev;
+ int size, i, pos = priv->pos;
+ struct devres *dr;
+ struct list_head *head;
+ struct list_head *item;
+ unsigned long flags;
+ char data[16];
+ char *dataptr;
+
+ if (pos == 0) {
+ seq_printf(s, "dev: %p %s\n", dev, dev_name(dev));
+ return 0;
+ }
+
+ spin_lock_irqsave(&dev->devres_lock, flags);
+
+ head = &dev->devres_head;
+ if (!head || list_empty(head))
+ goto out_eof;
+ item = head;
+
+ /* Walk the device resource list to item number *position */
+ while (pos--) {
+ item = item->next;
+ /* Check for end of list before required item */
+ if (item == head)
+ goto out_eof;
+ }
+
+ /* Node found, grab the details */
+ dr = container_of(item, struct devres, node.entry);
+ size = dr->node.size;
+ dataptr = (char *)dr->data;
+
+ /* Take a copy of the data before unlock */
+ memcpy(data, dataptr, (size < 16 ? size : 16));
+
+ spin_unlock_irqrestore(&dev->devres_lock, flags);
+
+ /* Print the node details */
+ seq_printf(s, "res: %p %9d ", dataptr, size);
+
+ for (i = 0; i < 16; i++) {
+ if (size-- > 0)
+ seq_printf(s, "%02x", data[i]);
+ else
+ seq_puts(s, " ");
+ }
+
+ if (dr->node.name)
+ seq_printf(s, " %s", dr->node.name);
+
+ seq_putc(s, '\n');
+
+ return 0;
+
+out_eof:
+ spin_unlock_irqrestore(&dev->devres_lock, flags);
+ priv->eof = true;
+ return 0; /* Seek past EOF */
+}
+
+static const struct seq_operations devres_dbgfs_seq_ops = {
+ .start = devres_dbgfs_seq_start,
+ .show = devres_dbgfs_seq_show,
+ .next = devres_dbgfs_seq_next,
+ .stop = devres_dbgfs_seq_stop,
+};
+
+/**
+ * devres_dbgfs_seq_open - open seq file for a devres debugfs file
+ * @ino: pointer to debugfs inode
+ * @fp: pointer to file structure
+ *
+ * Static debug function called when the user opens a device managed
+ * resources debugfs file. It registers with the device to ensure that
+ * the device usage count never drops to zero while the file is open.
+ * This prevents the device from being released if the file is held
+ * open even if its device driver deregisters. This can be useful for
+ * debugging a device even after its driver has been removed with rmmod.
+ *
+ * It then kmallocs a private structure used to keep track of the file
+ * position and the struct device, it exits via seq_open().
+ */
+static int devres_dbgfs_seq_open(struct inode *ino, struct file *fp)
+{
+ struct devres_dbgfs_private *priv;
+ struct device *dev = ino->i_private;
+ struct seq_file *seq;
+ int err = -ENOMEM;
+
+ /* Register as a user of the device to prevent it from */
+ /* going away while the file is still open */
+ if (!get_device(dev))
+ return -ENODEV;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ goto out;
+
+ priv->dev = dev; /* no need to set pos & eof */
+
+ err = seq_open(fp, &devres_dbgfs_seq_ops);
+ if (err)
+ goto out;
+
+ seq = fp->private_data;
+ seq->private = priv;
+
+ return 0;
+
+out:
+ kfree(priv);
+
+ return err;
+}
+
+/**
+ * devres_dbgfs_seq_release - release seq file for a devres debugfs file
+ * @ino: pointer to debugfs inode
+ * @fp: pointer to file structure
+ *
+ * Static debug function called when the user closes a device managed
+ * resources debugfs file. It de-registers from the device to allow
+ * the device to be released.
+ */
+static int devres_dbgfs_seq_release(struct inode *ino, struct file *fp)
+{
+ struct device *dev = fp->f_inode->i_private;
+ struct seq_file *seq = fp->private_data;
+
+ kfree(seq->private);
+
+ /* Deregister from the device to allow it to go away when ready */
+ put_device(dev);
+
+ return seq_release(ino, fp);
+}
+
+static const struct file_operations devres_dbgfs_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = devres_dbgfs_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = devres_dbgfs_seq_release,
+};
+
+/**
+ * devres_dbgfs_get_dir - find dentry of the managed devices debugfs directory
+ *
+ * Static debug function that returns a pointer to the dentry of the debugfs
+ * directory used to contain the debugfs files for devices that use managed
+ * resources.
+ *
+ * This function must only be called if devres_dbgfs_lock is held.
+ *
+ * A return value of NULL means that the directory did not exist and cannot
+ * be created.
+ */
+static struct dentry *devres_dbgfs_get_dir(void)
+{
+ struct dentry *root;
+
+ if (devres_dbgfs_root)
+ return devres_dbgfs_root;
+
+ root = debugfs_create_dir(devres_dbgfs_rootname, NULL);
+ if (!IS_ERR(root))
+ devres_dbgfs_root = root;
+
+ return devres_dbgfs_root;
+}
+
+/**
+ * devres_dbgfs_find_filelink - find the filelink for a device's debugfs file
+ * @dev: device
+ *
+ * Static debug function that locates a link pointing to the dentry
+ * of a device's debugfs file.
+ *
+ * This function must only be called if devres_dbgfs_lock is held.
+ *
+ * Safe to call even if no such file or link exists, just returns
+ * NULL. For speed, the function always starts the scan of the list
+ * of links at the last one accessed, on the assumption that such
+ * searches will occur in clusters for the same device and there will
+ * only be an occasional change of device.
+ */
+static struct devres_dbgfs_link *devres_dbgfs_find_filelink(struct device *dev)
+{
+ struct devres_dbgfs_link *link;
+
+ link = devres_dbgfs_lastused;
+
+ if (!link)
+ return NULL;
+
+ while (1) {
+ if (link->dev == dev) {
+ devres_dbgfs_lastused = link;
+ break;
+ }
+ if (list_is_last(&link->list, &devres_dbgfs_lastused->list)) {
+ link = NULL; /* Not found */
+ break;
+ }
+ link = list_next_entry(link, list);
+ };
+
+ return link;
+}
+
+/**
+ * devres_dbgfs_remove_file - remove a device's debugfs file.
+ * @dev: device
+ *
+ * Static debug function called as part of the device release procedure
+ * IFF at least one managed reource has been allocated resulting in a
+ * file being created.
+ *
+ * It is safe to call without checking that the file has actually been
+ * created.
+ *
+ * This function locks devres_dbgfs_lock.
+ */
+static void devres_remove_debugfs_file(struct device *dev)
+{
+ struct devres_dbgfs_link *link;
+ unsigned long flags;
+
+ spin_lock_irqsave(&devres_dbgfs_lock, flags);
+ link = devres_dbgfs_find_filelink(dev);
+ if (link) {
+ debugfs_remove(link->dp);
+ if (list_empty(&link->list))
+ devres_dbgfs_lastused = NULL;
+ else {
+ devres_dbgfs_lastused = list_next_entry(link, list);
+ list_del(&link->list);
+ }
+ kfree(link);
+ }
+ spin_unlock_irqrestore(&devres_dbgfs_lock, flags);
+}
+
+/**
+ * devres_dbgfs_create_file - create debugfs file for a device
+ * @dev: device
+ *
+ * Static debug function that will automatically create a debugfs file
+ * with the same name as the supplied device IFF the said file has not
+ * already been created.
+ *
+ * This function locks devres_dbgfs_lock.
+ */
+static void devres_dbgfs_create_file(struct device *dev)
+{
+ struct dentry *debugfsfile = NULL;
+ struct devres_dbgfs_link *link;
+ struct dentry *debugfsdir;
+ unsigned long flags;
+
+ spin_lock_irqsave(&devres_dbgfs_lock, flags);
+
+ link = devres_dbgfs_find_filelink(dev);
+ if (link)
+ goto out_unlock;
+
+ debugfsdir = devres_dbgfs_get_dir();
+ if (debugfsdir)
+ /* Create file, n.b. dev goes into inode->i_private */
+ debugfsfile = debugfs_create_file(dev_name(dev), 0444,
+ debugfsdir, dev,
+ &devres_dbgfs_seq_fops);
+ if (!debugfsfile)
+ goto out_unlock;
+
+ /* Success: now create filelink entry in linked list */
+ link = kmalloc(sizeof(*link), GFP_KERNEL);
+ if (!link) {
+ debugfs_remove(debugfsfile);
+ goto out_unlock;
+ }
+
+ INIT_LIST_HEAD(&link->list);
+ link->dev = dev;
+ link->dp = debugfsfile;
+ if (devres_dbgfs_lastused)
+ list_add(&link->list, &devres_dbgfs_lastused->list);
+ devres_dbgfs_lastused = link;
+
+out_unlock:
+ spin_unlock_irqrestore(&devres_dbgfs_lock, flags);
+}
+#endif /* CONFIG_DEVRES_DEBUGFS */
+
/*
* Release functions for devres group. These callbacks are used only
* for identification.
@@ -220,6 +601,9 @@ void devres_add(struct device *dev, void *res)
spin_lock_irqsave(&dev->devres_lock, flags);
add_dr(dev, &dr->node);
spin_unlock_irqrestore(&dev->devres_lock, flags);
+#ifdef CONFIG_DEVRES_DEBUGFS
+ devres_dbgfs_create_file(dev);
+#endif /* CONFIG_DEVRES_DEBUGFS */
}
EXPORT_SYMBOL_GPL(devres_add);
@@ -511,6 +895,9 @@ int devres_release_all(struct device *dev)
/* Looks like an uninitialized device structure */
if (WARN_ON(dev->devres_head.next == NULL))
return -ENODEV;
+#ifdef CONFIG_DEVRES_DEBUGFS
+ devres_remove_debugfs_file(dev);
+#endif /* CONFIG_DEVRES_DEBUGFS */
spin_lock_irqsave(&dev->devres_lock, flags);
return release_nodes(dev, dev->devres_head.next, &dev->devres_head,
flags);
--
1.7.10.4
On 2014-07-24 at 17:18:01 +0200, Rob Jones <[email protected]> wrote:
> Reviewed-by: Ian Molton <[email protected]>
> Suggested-by: Ben Dooks <[email protected]>
> Signed-off-by: Rob Jones <[email protected]>
> ---
> Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
> drivers/base/Kconfig | 18 ++
> drivers/base/devres.c | 387 +++++++++++++++++++++++++
> 3 files changed, 545 insertions(+)
> create mode 100644 Documentation/driver-model/devres-debugfs.txt
[...]
> diff --git a/drivers/base/devres.c b/drivers/base/devres.c
> index 5c88a27..41b6465 100644
> --- a/drivers/base/devres.c
> +++ b/drivers/base/devres.c
> @@ -7,9 +7,13 @@
[...]
> +/**
> + * devres_dbgfs_seq_show - seq file output routine for a devres debugfs file
> + * @s: pointer to seq file structure
> + * @v: pointer to private data set up by devres_dbgfs_seq_next().
> + *
> + * Static debug function called when the user reads from a device managed
> + * resources debugfs file. It outputs to the user buffer using seq_file
> + * function seq_printf();
> + *
> + * This function locks devres_lock in the device structure.
> + */
> +static int devres_dbgfs_seq_show(struct seq_file *s, void *v)
> +{
> + struct devres_dbgfs_private *priv = v;
> + struct device *dev = priv->dev;
> + int size, i, pos = priv->pos;
> + struct devres *dr;
> + struct list_head *head;
> + struct list_head *item;
> + unsigned long flags;
> + char data[16];
> + char *dataptr;
> +
> + if (pos == 0) {
> + seq_printf(s, "dev: %p %s\n", dev, dev_name(dev));
> + return 0;
> + }
> +
> + spin_lock_irqsave(&dev->devres_lock, flags);
> +
> + head = &dev->devres_head;
> + if (!head || list_empty(head))
> + goto out_eof;
> + item = head;
> +
> + /* Walk the device resource list to item number *position */
> + while (pos--) {
> + item = item->next;
> + /* Check for end of list before required item */
> + if (item == head)
> + goto out_eof;
> + }
> +
> + /* Node found, grab the details */
> + dr = container_of(item, struct devres, node.entry);
> + size = dr->node.size;
> + dataptr = (char *)dr->data;
> +
> + /* Take a copy of the data before unlock */
> + memcpy(data, dataptr, (size < 16 ? size : 16));
How about using min_t(size_t, size, 16) and making size of type size_t
for that matter, since dr->node.size is size_t anyway?
> +
> + spin_unlock_irqrestore(&dev->devres_lock, flags);
> +
> + /* Print the node details */
> + seq_printf(s, "res: %p %9d ", dataptr, size);
> +
> + for (i = 0; i < 16; i++) {
Use ARRAY_SIZE(data) here, instead of the 'magic' number 16?
> + if (size-- > 0)
> + seq_printf(s, "%02x", data[i]);
> + else
> + seq_puts(s, " ");
> + }
> +
> + if (dr->node.name)
> + seq_printf(s, " %s", dr->node.name);
> +
> + seq_putc(s, '\n');
> +
> + return 0;
> +
> +out_eof:
> + spin_unlock_irqrestore(&dev->devres_lock, flags);
> + priv->eof = true;
> + return 0; /* Seek past EOF */
> +}
> +
> +static const struct seq_operations devres_dbgfs_seq_ops = {
> + .start = devres_dbgfs_seq_start,
> + .show = devres_dbgfs_seq_show,
> + .next = devres_dbgfs_seq_next,
> + .stop = devres_dbgfs_seq_stop,
> +};
On Thu, Jul 24, 2014 at 04:18:01PM +0100, Rob Jones wrote:
> Reviewed-by: Ian Molton <[email protected]>
> Suggested-by: Ben Dooks <[email protected]>
> Signed-off-by: Rob Jones <[email protected]>
> ---
> Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
> drivers/base/Kconfig | 18 ++
> drivers/base/devres.c | 387 +++++++++++++++++++++++++
> 3 files changed, 545 insertions(+)
> create mode 100644 Documentation/driver-model/devres-debugfs.txt
>
> diff --git a/Documentation/driver-model/devres-debugfs.txt b/Documentation/driver-model/devres-debugfs.txt
> new file mode 100644
> index 0000000..7004ebd
> --- /dev/null
> +++ b/Documentation/driver-model/devres-debugfs.txt
> @@ -0,0 +1,140 @@
> +
> +Introduction
> +============
> +
> +This document describes a file system that can be enabled to assist
> +with the debugging of devices that use managed reources
> +
> +Outline of Operation
> +====================
> +
> +Setting the flag DEVRES_DEBUGFS (depends on DEBUG_DEVRES) enables a
> +debug facility for device managed resources. This takes the form of
> +a directory in the debugfs file system which is a pseudo file system
> +(typically mounted at /sys/kernel/debug) similar in concept to sysfs
> +but with no restrictions on the format of the data read from a file.
> +
> +The directory (devres/) is created the first time a managed resource
> +is allocated for any device.
> +
> +The first time a managed resource is allocated for a device, a file
> +with the same name as the device is created in devres/.
> +
> +The file is read only and can be read by normal userspace utilities
> +(such as cat).
> +
> +The data returned is in ASCII text format and has one header line for
> +the device followed by one line per allocated resource.
> +
> +It is possible to seek to a given line within the file: position 0
> +(zero) goes directly to the device line, position 1 goes to the first
> +resource line and so on. Attempting to seek to a line that does not
> +exist returns EOF.
> +
> +If opened and read sequentially, a file will initially give Line 0 (see
> +below) and then each subsequent read will give a Resource Line until
> +EOF. Note that the data may change on the fly (see Notes below).
> +
> +Data Format
> +===========
> +
> +Device Line (Line 0)
> +--------------------
> +
> +dev: <address> <name>
> +
> +There is a single space between each field.
> +
> +dev: = literal text identifying this as a device line.
> +
> +<address> = the address in kernel memory of the device data structure.
> +The layout of "struct device" can be found in include/linux/device.h.
> +This value is displayed in hexadecimal format using the "%p" format
> +specifier and thus will vary in length depending on the word size of
> +the kernel, e.g. 8 characters for a 32 bit kernel.
> +
> +<name> = the name of the device. This should be the same as the file
> +name, it is included to facilitate identification when multiple
> +devices are being listed. The length of this field can vary.
> +
> +Resource Line (Line 1 et seq.)
> +------------------------------
> +
> +res: <address> <length> <data> <name>
> +
> +There is a single space between each field.
> +
> +res: = literal text identifying this as a resource line.
> +
> +<address> = the address in kernel memory of the resource data. The
> +structure pointed to can vary depending on the type of resource.
> +This field is encoded in hexadecimal format using the "%p" format
> +specifier and thus will vary in length depending on the word size of
> +the kernel, e.g. 8 characters for a 32 bit kernel.
> +
> +<length> = the length of the resource data. This field is encoded
> +in decimal format, right justified, space filled and is always 9
> +characters long.
> +
> +<data> = a hexadecimal display of the first 16 (or <length> if less)
> +bytes of data starting for location <address>. If <length> is less
> +than 16, this field is padded with spaces on the right to the full
> +32 characters.
> +
> +<name> = a string indentifying the resource type. This is often a
> +string containing the name of the function to be used to free the
> +resource. Typical examples are "devm_kzalloc_release" which identifies
> +a memory resource and "devm_gpio_release" which identifies a gpio
> +resource. The length of this field can vary.
> +
> +Notes
> +=====
> +
> +1. Once created, a file persists until the device is removed even
> + if all allocated resources are freed. This means that the existence
> + of the file is confirmation that at least one resource has been
> + allocated at some point, even if the device now has none allocated.
> +
> +2. Opening a file and holding it open will prevent the freeing up of
> + of the device - the final removal is held off until the file is
> + closed. Managed resources can still be freed if, say, a driver is
> + removed.
> +
> +3. Resources can, in principle, be allocated and freed on the fly so
> + it should not be assumed in general that seeking to a particular
> + resource line will always return the same resource. However, that is
> + a function of the device driver concerned and it may be a valid
> + assumption for some drivers, e.g. one that only allocates resources
> + during its .probe function.
> +
> +4. The device's list of resources is traversed from its base to the
> + requested item each time the file is read. During this scan resources
> + are spinlocked, which may have implications if resources can be
> + allocated during time critical code at the same time as a read is
> + taking place.
> +
> +5. A copy is taken of (up to) 16 bytes of resource data while the
> + spinlock (see note 4, above) is still in place and so can be relied
> + upon as an accurate snapshot at the time of the read but it must be
> + remembered that resources may change dynamically (see note 3, above)
> + so the memory may have changed subsequently.
> +
> +Sample Output
> +=============
> +
> +root@arm:~# cat /sys/kernel/debug/devres/mmc0
> +dev: ed980008 mmc0
> +res: ed95a618 50 000000004884e8800001000039a695ed devm_kzalloc_release
> +res: ed95cc58 4 02000000 devm_gpio_release
> +res: ed95cc98 8 a2000000000098ed devm_irq_release
> +root@arm:~#
> +
> +This shows three managed resources allocated to device "mmc0".
> +
> +1. A block of memory 50 bytes long (the first 16 byte are displayed).
> +2. A GPIO.
> +3. An IRQ.
> +
> +If 16 bytes of data is insufficient, you can try using other debugging
> +tools to examine the data.
Why did you pick 16 bytes? What can I do with that information?
> diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> index 8fa8dea..6a2f125 100644
> --- a/drivers/base/Kconfig
> +++ b/drivers/base/Kconfig
> @@ -177,6 +177,24 @@ config DEBUG_DEVRES
>
> If you are unsure about this, Say N here.
>
> +config DEVRES_DEBUGFS
> + bool "Managed device resources debugfs file system"
> + depends on DEBUG_DEVRES
> + help
> + This option enables a debugfs file system related to Managed
> + Resources. When a device allocates a managed resource, with
> + this option enabled, a read-only file with the same name as
> + the device is created in the file system. Reading this file
> + provides some basic debug information about the managed
> + resources allocated to the device.
> +
> + The overhead caused by enabling this option is quite small.
> + Specifically, a small memory overhead for each device and a
> + small time overhead at each resource allocation and
> + de-allocation.
> +
> + If you are unsure about this, Say N here.
> +
> config SYS_HYPERVISOR
> bool
> default n
> diff --git a/drivers/base/devres.c b/drivers/base/devres.c
> index 5c88a27..41b6465 100644
> --- a/drivers/base/devres.c
> +++ b/drivers/base/devres.c
> @@ -7,9 +7,13 @@
> * This file is released under the GPLv2.
> */
>
> +#include <linux/debugfs.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/seq_file.h>
> #include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/uaccess.h>
why not just make this a separate file, that would remove the #ifdef
from this file, right?
> +/**
> + * devres_dbgfs_seq_show - seq file output routine for a devres debugfs file
> + * @s: pointer to seq file structure
> + * @v: pointer to private data set up by devres_dbgfs_seq_next().
> + *
> + * Static debug function called when the user reads from a device managed
> + * resources debugfs file. It outputs to the user buffer using seq_file
> + * function seq_printf();
> + *
> + * This function locks devres_lock in the device structure.
> + */
> +static int devres_dbgfs_seq_show(struct seq_file *s, void *v)
> +{
> + struct devres_dbgfs_private *priv = v;
> + struct device *dev = priv->dev;
> + int size, i, pos = priv->pos;
> + struct devres *dr;
> + struct list_head *head;
> + struct list_head *item;
> + unsigned long flags;
> + char data[16];
> + char *dataptr;
> +
> + if (pos == 0) {
> + seq_printf(s, "dev: %p %s\n", dev, dev_name(dev));
%pK please for all kernel pointers.
> +/**
> + * devres_dbgfs_create_file - create debugfs file for a device
> + * @dev: device
> + *
> + * Static debug function that will automatically create a debugfs file
> + * with the same name as the supplied device IFF the said file has not
> + * already been created.
> + *
> + * This function locks devres_dbgfs_lock.
> + */
> +static void devres_dbgfs_create_file(struct device *dev)
> +{
> + struct dentry *debugfsfile = NULL;
> + struct devres_dbgfs_link *link;
> + struct dentry *debugfsdir;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&devres_dbgfs_lock, flags);
> +
> + link = devres_dbgfs_find_filelink(dev);
> + if (link)
> + goto out_unlock;
> +
> + debugfsdir = devres_dbgfs_get_dir();
> + if (debugfsdir)
> + /* Create file, n.b. dev goes into inode->i_private */
> + debugfsfile = debugfs_create_file(dev_name(dev), 0444,
> + debugfsdir, dev,
> + &devres_dbgfs_seq_fops);
I worry about this, as there is no reason that devices have to have
"unique" names in the system. Odds are, there's lots of conflicts,
which is why sysfs is a tree, not a flat heirachy.
> + if (!debugfsfile)
> + goto out_unlock;
If debugfs is not enabled, this will not trigger, are you sure you want
that?
> +
> + /* Success: now create filelink entry in linked list */
> + link = kmalloc(sizeof(*link), GFP_KERNEL);
> + if (!link) {
> + debugfs_remove(debugfsfile);
> + goto out_unlock;
> + }
> +
> + INIT_LIST_HEAD(&link->list);
> + link->dev = dev;
> + link->dp = debugfsfile;
> + if (devres_dbgfs_lastused)
> + list_add(&link->list, &devres_dbgfs_lastused->list);
> + devres_dbgfs_lastused = link;
> +
> +out_unlock:
> + spin_unlock_irqrestore(&devres_dbgfs_lock, flags);
> +}
> +#endif /* CONFIG_DEVRES_DEBUGFS */
> +
> /*
> * Release functions for devres group. These callbacks are used only
> * for identification.
> @@ -220,6 +601,9 @@ void devres_add(struct device *dev, void *res)
> spin_lock_irqsave(&dev->devres_lock, flags);
> add_dr(dev, &dr->node);
> spin_unlock_irqrestore(&dev->devres_lock, flags);
> +#ifdef CONFIG_DEVRES_DEBUGFS
> + devres_dbgfs_create_file(dev);
> +#endif /* CONFIG_DEVRES_DEBUGFS */
ifdefs like this are strongly discouraged.
Overall, I'm curious as to what this code is good for? What use cases
will benifit for seeing all of this information? Why would a developer
ever care about all of the resources that a specific device has created,
what could I do with that information?
It seems "neat", but not something I would ever actually care about, as
there's nothing to do with that info. A device will never allocate
something it doesn't actually need, right?
thanks,
greg k-h
On 24/07/14 16:59, Greg KH wrote:
> On Thu, Jul 24, 2014 at 04:18:01PM +0100, Rob Jones wrote:
>> Reviewed-by: Ian Molton <[email protected]>
>> Suggested-by: Ben Dooks <[email protected]>
>> Signed-off-by: Rob Jones <[email protected]>
>> ---
>> Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
>> drivers/base/Kconfig | 18 ++
>> drivers/base/devres.c | 387 +++++++++++++++++++++++++
>> 3 files changed, 545 insertions(+)
>> create mode 100644 Documentation/driver-model/devres-debugfs.txt
>>
>> diff --git a/Documentation/driver-model/devres-debugfs.txt b/Documentation/driver-model/devres-debugfs.txt
>> new file mode 100644
>> index 0000000..7004ebd
>> --- /dev/null
>> +++ b/Documentation/driver-model/devres-debugfs.txt
>> @@ -0,0 +1,140 @@
>> +
>> +Introduction
>> +============
>> +
>> +This document describes a file system that can be enabled to assist
>> +with the debugging of devices that use managed reources
>> +
>> +Outline of Operation
>> +====================
>> +
>> +Setting the flag DEVRES_DEBUGFS (depends on DEBUG_DEVRES) enables a
>> +debug facility for device managed resources. This takes the form of
>> +a directory in the debugfs file system which is a pseudo file system
>> +(typically mounted at /sys/kernel/debug) similar in concept to sysfs
>> +but with no restrictions on the format of the data read from a file.
>> +
>> +The directory (devres/) is created the first time a managed resource
>> +is allocated for any device.
>> +
>> +The first time a managed resource is allocated for a device, a file
>> +with the same name as the device is created in devres/.
>> +
>> +The file is read only and can be read by normal userspace utilities
>> +(such as cat).
>> +
>> +The data returned is in ASCII text format and has one header line for
>> +the device followed by one line per allocated resource.
>> +
>> +It is possible to seek to a given line within the file: position 0
>> +(zero) goes directly to the device line, position 1 goes to the first
>> +resource line and so on. Attempting to seek to a line that does not
>> +exist returns EOF.
>> +
>> +If opened and read sequentially, a file will initially give Line 0 (see
>> +below) and then each subsequent read will give a Resource Line until
>> +EOF. Note that the data may change on the fly (see Notes below).
>> +
>> +Data Format
>> +===========
>> +
>> +Device Line (Line 0)
>> +--------------------
>> +
>> +dev: <address> <name>
>> +
>> +There is a single space between each field.
>> +
>> +dev: = literal text identifying this as a device line.
>> +
>> +<address> = the address in kernel memory of the device data structure.
>> +The layout of "struct device" can be found in include/linux/device.h.
>> +This value is displayed in hexadecimal format using the "%p" format
>> +specifier and thus will vary in length depending on the word size of
>> +the kernel, e.g. 8 characters for a 32 bit kernel.
>> +
>> +<name> = the name of the device. This should be the same as the file
>> +name, it is included to facilitate identification when multiple
>> +devices are being listed. The length of this field can vary.
>> +
>> +Resource Line (Line 1 et seq.)
>> +------------------------------
>> +
>> +res: <address> <length> <data> <name>
>> +
>> +There is a single space between each field.
>> +
>> +res: = literal text identifying this as a resource line.
>> +
>> +<address> = the address in kernel memory of the resource data. The
>> +structure pointed to can vary depending on the type of resource.
>> +This field is encoded in hexadecimal format using the "%p" format
>> +specifier and thus will vary in length depending on the word size of
>> +the kernel, e.g. 8 characters for a 32 bit kernel.
>> +
>> +<length> = the length of the resource data. This field is encoded
>> +in decimal format, right justified, space filled and is always 9
>> +characters long.
>> +
>> +<data> = a hexadecimal display of the first 16 (or <length> if less)
>> +bytes of data starting for location <address>. If <length> is less
>> +than 16, this field is padded with spaces on the right to the full
>> +32 characters.
>> +
>> +<name> = a string indentifying the resource type. This is often a
>> +string containing the name of the function to be used to free the
>> +resource. Typical examples are "devm_kzalloc_release" which identifies
>> +a memory resource and "devm_gpio_release" which identifies a gpio
>> +resource. The length of this field can vary.
>> +
>> +Notes
>> +=====
>> +
>> +1. Once created, a file persists until the device is removed even
>> + if all allocated resources are freed. This means that the existence
>> + of the file is confirmation that at least one resource has been
>> + allocated at some point, even if the device now has none allocated.
>> +
>> +2. Opening a file and holding it open will prevent the freeing up of
>> + of the device - the final removal is held off until the file is
>> + closed. Managed resources can still be freed if, say, a driver is
>> + removed.
>> +
>> +3. Resources can, in principle, be allocated and freed on the fly so
>> + it should not be assumed in general that seeking to a particular
>> + resource line will always return the same resource. However, that is
>> + a function of the device driver concerned and it may be a valid
>> + assumption for some drivers, e.g. one that only allocates resources
>> + during its .probe function.
>> +
>> +4. The device's list of resources is traversed from its base to the
>> + requested item each time the file is read. During this scan resources
>> + are spinlocked, which may have implications if resources can be
>> + allocated during time critical code at the same time as a read is
>> + taking place.
>> +
>> +5. A copy is taken of (up to) 16 bytes of resource data while the
>> + spinlock (see note 4, above) is still in place and so can be relied
>> + upon as an accurate snapshot at the time of the read but it must be
>> + remembered that resources may change dynamically (see note 3, above)
>> + so the memory may have changed subsequently.
>> +
>> +Sample Output
>> +=============
>> +
>> +root@arm:~# cat /sys/kernel/debug/devres/mmc0
>> +dev: ed980008 mmc0
>> +res: ed95a618 50 000000004884e8800001000039a695ed devm_kzalloc_release
>> +res: ed95cc58 4 02000000 devm_gpio_release
>> +res: ed95cc98 8 a2000000000098ed devm_irq_release
>> +root@arm:~#
>> +
>> +This shows three managed resources allocated to device "mmc0".
>> +
>> +1. A block of memory 50 bytes long (the first 16 byte are displayed).
>> +2. A GPIO.
>> +3. An IRQ.
>> +
>> +If 16 bytes of data is insufficient, you can try using other debugging
>> +tools to examine the data.
>
> Why did you pick 16 bytes? What can I do with that information?
I chose 16 bytes simply because that occupies 32 columns and usually
fits on a single line with the rest of the information output.
For some resources, such as GPIOs and IRQs, it can be enough to give
you useful information without risking dumping shedloads of data.
For example, a quick look into kernel/irq/devres.c tells me that the
third resource for mmc0, in the example above, is IRQ 0xa2.
I'm sure I don't need to explain that, when you are debugging, being
able to rapidly answer questions such as "Am I getting the right IRQ?"
or "How much memory have I allocated?" can save a lot of time.
For known structures it could be expanded to decode the structure.
>
>
>> diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
>> index 8fa8dea..6a2f125 100644
>> --- a/drivers/base/Kconfig
>> +++ b/drivers/base/Kconfig
>> @@ -177,6 +177,24 @@ config DEBUG_DEVRES
>>
>> If you are unsure about this, Say N here.
>>
>> +config DEVRES_DEBUGFS
>> + bool "Managed device resources debugfs file system"
>> + depends on DEBUG_DEVRES
>> + help
>> + This option enables a debugfs file system related to Managed
>> + Resources. When a device allocates a managed resource, with
>> + this option enabled, a read-only file with the same name as
>> + the device is created in the file system. Reading this file
>> + provides some basic debug information about the managed
>> + resources allocated to the device.
>> +
>> + The overhead caused by enabling this option is quite small.
>> + Specifically, a small memory overhead for each device and a
>> + small time overhead at each resource allocation and
>> + de-allocation.
>> +
>> + If you are unsure about this, Say N here.
>> +
>> config SYS_HYPERVISOR
>> bool
>> default n
>> diff --git a/drivers/base/devres.c b/drivers/base/devres.c
>> index 5c88a27..41b6465 100644
>> --- a/drivers/base/devres.c
>> +++ b/drivers/base/devres.c
>> @@ -7,9 +7,13 @@
>> * This file is released under the GPLv2.
>> */
>>
>> +#include <linux/debugfs.h>
>> #include <linux/device.h>
>> #include <linux/module.h>
>> +#include <linux/seq_file.h>
>> #include <linux/slab.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/uaccess.h>
>
> why not just make this a separate file, that would remove the #ifdef
> from this file, right?
Do you mean create a new module? Or as a file to be included?
I preferred to keep this patch entirely within devres.c, as it feels
less intrusive that way.
If it's in the way, It could as easily go at the end of the file, then
it would only need a function prototype at the top of the file but it
could easily be put in another file, the only externals needed would be
devres_debugfs_create_file() and devres_remove_debugfs_file().
(Thinks: should rename that second one to devres_debugfs_remove_file()
for consistency.)
>
>
>> +/**
>> + * devres_dbgfs_seq_show - seq file output routine for a devres debugfs file
>> + * @s: pointer to seq file structure
>> + * @v: pointer to private data set up by devres_dbgfs_seq_next().
>> + *
>> + * Static debug function called when the user reads from a device managed
>> + * resources debugfs file. It outputs to the user buffer using seq_file
>> + * function seq_printf();
>> + *
>> + * This function locks devres_lock in the device structure.
>> + */
>> +static int devres_dbgfs_seq_show(struct seq_file *s, void *v)
>> +{
>> + struct devres_dbgfs_private *priv = v;
>> + struct device *dev = priv->dev;
>> + int size, i, pos = priv->pos;
>> + struct devres *dr;
>> + struct list_head *head;
>> + struct list_head *item;
>> + unsigned long flags;
>> + char data[16];
>> + char *dataptr;
>> +
>> + if (pos == 0) {
>> + seq_printf(s, "dev: %p %s\n", dev, dev_name(dev));
>
> %pK please for all kernel pointers.
Certainly, I wasn't aware of that convention.
Looking it up, it makes sense.
>
>
>
>> +/**
>> + * devres_dbgfs_create_file - create debugfs file for a device
>> + * @dev: device
>> + *
>> + * Static debug function that will automatically create a debugfs file
>> + * with the same name as the supplied device IFF the said file has not
>> + * already been created.
>> + *
>> + * This function locks devres_dbgfs_lock.
>> + */
>> +static void devres_dbgfs_create_file(struct device *dev)
>> +{
>> + struct dentry *debugfsfile = NULL;
>> + struct devres_dbgfs_link *link;
>> + struct dentry *debugfsdir;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&devres_dbgfs_lock, flags);
>> +
>> + link = devres_dbgfs_find_filelink(dev);
>> + if (link)
>> + goto out_unlock;
>> +
>> + debugfsdir = devres_dbgfs_get_dir();
>> + if (debugfsdir)
>> + /* Create file, n.b. dev goes into inode->i_private */
>> + debugfsfile = debugfs_create_file(dev_name(dev), 0444,
>> + debugfsdir, dev,
>> + &devres_dbgfs_seq_fops);
>
> I worry about this, as there is no reason that devices have to have
> "unique" names in the system. Odds are, there's lots of conflicts,
> which is why sysfs is a tree, not a flat heirachy.
I don't know for sure about the incidence of repeated device names but
the code is, I think, safe: if the file already exists, the create
will fail and no further action will be taken for this device. Any
subsequent read of the file will just return details of the first
device.
If this is common, I could, for example, implement a directory per
device name. I didn't do it in the first instance to reduce complexity.
I was reluctant to add a suffix to the device name as that would have
too high a chance of conflict where there are collections of similar
devices.
>
>
>> + if (!debugfsfile)
>> + goto out_unlock;
>
> If debugfs is not enabled, this will not trigger, are you sure you want
> that?
A good point that I missed: I need to include a dependency on DEBUG_FS
in Kconfig. I presume it wouldn't even compile without that flag, which
must be set in the repository I cloned. So many things to learn :-)
>
>
>> +
>> + /* Success: now create filelink entry in linked list */
>> + link = kmalloc(sizeof(*link), GFP_KERNEL);
>> + if (!link) {
>> + debugfs_remove(debugfsfile);
>> + goto out_unlock;
>> + }
>> +
>> + INIT_LIST_HEAD(&link->list);
>> + link->dev = dev;
>> + link->dp = debugfsfile;
>> + if (devres_dbgfs_lastused)
>> + list_add(&link->list, &devres_dbgfs_lastused->list);
>> + devres_dbgfs_lastused = link;
>> +
>> +out_unlock:
>> + spin_unlock_irqrestore(&devres_dbgfs_lock, flags);
>> +}
>> +#endif /* CONFIG_DEVRES_DEBUGFS */
>> +
>> /*
>> * Release functions for devres group. These callbacks are used only
>> * for identification.
>> @@ -220,6 +601,9 @@ void devres_add(struct device *dev, void *res)
>> spin_lock_irqsave(&dev->devres_lock, flags);
>> add_dr(dev, &dr->node);
>> spin_unlock_irqrestore(&dev->devres_lock, flags);
>> +#ifdef CONFIG_DEVRES_DEBUGFS
>> + devres_dbgfs_create_file(dev);
>> +#endif /* CONFIG_DEVRES_DEBUGFS */
>
> ifdefs like this are strongly discouraged.
I can see why - thought it was ugly as I was writing it.
I could use a #define that evaluates to a no-op if the flag is not
defined, would that be that preferable? I could also put that in an
include file if I move the code into a separate module, thereby
reducing the impact on the source in devres.c to just three lines.
>
> Overall, I'm curious as to what this code is good for? What use cases
> will benifit for seeing all of this information? Why would a developer
> ever care about all of the resources that a specific device has created,
> what could I do with that information?
First of all, it provides a simple way of checking what resources your
driver has allocated at any given time.
Secondly, and maybe more importantly, it provides a simple way to see
what resources other drivers have allocated - potentially very useful
in identifying resource conflicts.
>
> It seems "neat", but not something I would ever actually care about, as
> there's nothing to do with that info. A device will never allocate
> something it doesn't actually need, right?
Er.
In an ideal world populated by perfect programmers creating bug-free
code on model systems, I'm sure you're right :-)
Not to mention the fact that manufacturers' documentation is not always
100% clear.
Using a facility like this can save hours of ploughing through driver
code looking for an obscure conflict.
It becomes trivial to, for example, identify all devices currently
allocated an IRQ:
/sys/kernel/debug/devres# cat *|grep -r -e 'irq'|awk '{print $1 " " $4}'
2004000.spdif:res: 5400000018ec99ed
2028000.ssi:res: 4e00000018a49bed
imx-ipuv3-crtc.3:res: 8301000018d499ed
imx-ipuv3-crtc.2:res: 8201000018d099ed
imx-ipuv3-crtc.1:res: 8101000018cc99ed
imx-ipuv3-crtc.0:res: 8001000018c899ed
mmc2:res: e9000000002099ed
mmc0:res: a2000000000099ed
20cc034.snvs-rtc-lp:res: 3300000010cc1cee
2188000.ethernet:res: a6000000001011ee
2188000.ethernet:res: 97000000001011ee
2200000.sata:res: 4700000058720eee
21a4000.i2c:res: 45000000183423ee
or GPIOs:
/sys/kernel/debug/devres# grep -e 'gpio' *|grep -e 'res'|awk '{print $1
" " $4}'
2188000.ethernet:res: 5d000000
mmc0:res: 02000000
mmc2:res: 49000000
This is real output I just obtained from my Wandboard setup.
>
> thanks,
>
> greg k-h
>
>
--
Rob Jones
Codethink Ltd
mailto:[email protected]
tel:+44 161 236 5575
On Fri, Jul 25, 2014 at 12:11:36PM +0100, Rob Jones wrote:
>
>
> On 24/07/14 16:59, Greg KH wrote:
> >On Thu, Jul 24, 2014 at 04:18:01PM +0100, Rob Jones wrote:
> >>Reviewed-by: Ian Molton <[email protected]>
> >>Suggested-by: Ben Dooks <[email protected]>
> >>Signed-off-by: Rob Jones <[email protected]>
> >>---
> >> Documentation/driver-model/devres-debugfs.txt | 140 +++++++++
> >> drivers/base/Kconfig | 18 ++
> >> drivers/base/devres.c | 387 +++++++++++++++++++++++++
> >> 3 files changed, 545 insertions(+)
> >> create mode 100644 Documentation/driver-model/devres-debugfs.txt
> >>
> >>diff --git a/Documentation/driver-model/devres-debugfs.txt b/Documentation/driver-model/devres-debugfs.txt
> >>new file mode 100644
> >>index 0000000..7004ebd
> >>--- /dev/null
> >>+++ b/Documentation/driver-model/devres-debugfs.txt
> >>@@ -0,0 +1,140 @@
> >>+
> >>+Introduction
> >>+============
> >>+
> >>+This document describes a file system that can be enabled to assist
> >>+with the debugging of devices that use managed reources
> >>+
> >>+Outline of Operation
> >>+====================
> >>+
> >>+Setting the flag DEVRES_DEBUGFS (depends on DEBUG_DEVRES) enables a
> >>+debug facility for device managed resources. This takes the form of
> >>+a directory in the debugfs file system which is a pseudo file system
> >>+(typically mounted at /sys/kernel/debug) similar in concept to sysfs
> >>+but with no restrictions on the format of the data read from a file.
> >>+
> >>+The directory (devres/) is created the first time a managed resource
> >>+is allocated for any device.
> >>+
> >>+The first time a managed resource is allocated for a device, a file
> >>+with the same name as the device is created in devres/.
> >>+
> >>+The file is read only and can be read by normal userspace utilities
> >>+(such as cat).
> >>+
> >>+The data returned is in ASCII text format and has one header line for
> >>+the device followed by one line per allocated resource.
> >>+
> >>+It is possible to seek to a given line within the file: position 0
> >>+(zero) goes directly to the device line, position 1 goes to the first
> >>+resource line and so on. Attempting to seek to a line that does not
> >>+exist returns EOF.
> >>+
> >>+If opened and read sequentially, a file will initially give Line 0 (see
> >>+below) and then each subsequent read will give a Resource Line until
> >>+EOF. Note that the data may change on the fly (see Notes below).
> >>+
> >>+Data Format
> >>+===========
> >>+
> >>+Device Line (Line 0)
> >>+--------------------
> >>+
> >>+dev: <address> <name>
> >>+
> >>+There is a single space between each field.
> >>+
> >>+dev: = literal text identifying this as a device line.
> >>+
> >>+<address> = the address in kernel memory of the device data structure.
> >>+The layout of "struct device" can be found in include/linux/device.h.
> >>+This value is displayed in hexadecimal format using the "%p" format
> >>+specifier and thus will vary in length depending on the word size of
> >>+the kernel, e.g. 8 characters for a 32 bit kernel.
> >>+
> >>+<name> = the name of the device. This should be the same as the file
> >>+name, it is included to facilitate identification when multiple
> >>+devices are being listed. The length of this field can vary.
> >>+
> >>+Resource Line (Line 1 et seq.)
> >>+------------------------------
> >>+
> >>+res: <address> <length> <data> <name>
> >>+
> >>+There is a single space between each field.
> >>+
> >>+res: = literal text identifying this as a resource line.
> >>+
> >>+<address> = the address in kernel memory of the resource data. The
> >>+structure pointed to can vary depending on the type of resource.
> >>+This field is encoded in hexadecimal format using the "%p" format
> >>+specifier and thus will vary in length depending on the word size of
> >>+the kernel, e.g. 8 characters for a 32 bit kernel.
> >>+
> >>+<length> = the length of the resource data. This field is encoded
> >>+in decimal format, right justified, space filled and is always 9
> >>+characters long.
> >>+
> >>+<data> = a hexadecimal display of the first 16 (or <length> if less)
> >>+bytes of data starting for location <address>. If <length> is less
> >>+than 16, this field is padded with spaces on the right to the full
> >>+32 characters.
> >>+
> >>+<name> = a string indentifying the resource type. This is often a
> >>+string containing the name of the function to be used to free the
> >>+resource. Typical examples are "devm_kzalloc_release" which identifies
> >>+a memory resource and "devm_gpio_release" which identifies a gpio
> >>+resource. The length of this field can vary.
> >>+
> >>+Notes
> >>+=====
> >>+
> >>+1. Once created, a file persists until the device is removed even
> >>+ if all allocated resources are freed. This means that the existence
> >>+ of the file is confirmation that at least one resource has been
> >>+ allocated at some point, even if the device now has none allocated.
> >>+
> >>+2. Opening a file and holding it open will prevent the freeing up of
> >>+ of the device - the final removal is held off until the file is
> >>+ closed. Managed resources can still be freed if, say, a driver is
> >>+ removed.
> >>+
> >>+3. Resources can, in principle, be allocated and freed on the fly so
> >>+ it should not be assumed in general that seeking to a particular
> >>+ resource line will always return the same resource. However, that is
> >>+ a function of the device driver concerned and it may be a valid
> >>+ assumption for some drivers, e.g. one that only allocates resources
> >>+ during its .probe function.
> >>+
> >>+4. The device's list of resources is traversed from its base to the
> >>+ requested item each time the file is read. During this scan resources
> >>+ are spinlocked, which may have implications if resources can be
> >>+ allocated during time critical code at the same time as a read is
> >>+ taking place.
> >>+
> >>+5. A copy is taken of (up to) 16 bytes of resource data while the
> >>+ spinlock (see note 4, above) is still in place and so can be relied
> >>+ upon as an accurate snapshot at the time of the read but it must be
> >>+ remembered that resources may change dynamically (see note 3, above)
> >>+ so the memory may have changed subsequently.
> >>+
> >>+Sample Output
> >>+=============
> >>+
> >>+root@arm:~# cat /sys/kernel/debug/devres/mmc0
> >>+dev: ed980008 mmc0
> >>+res: ed95a618 50 000000004884e8800001000039a695ed devm_kzalloc_release
> >>+res: ed95cc58 4 02000000 devm_gpio_release
> >>+res: ed95cc98 8 a2000000000098ed devm_irq_release
> >>+root@arm:~#
> >>+
> >>+This shows three managed resources allocated to device "mmc0".
> >>+
> >>+1. A block of memory 50 bytes long (the first 16 byte are displayed).
> >>+2. A GPIO.
> >>+3. An IRQ.
> >>+
> >>+If 16 bytes of data is insufficient, you can try using other debugging
> >>+tools to examine the data.
> >
> >Why did you pick 16 bytes? What can I do with that information?
>
> I chose 16 bytes simply because that occupies 32 columns and usually
> fits on a single line with the rest of the information output.
>
> For some resources, such as GPIOs and IRQs, it can be enough to give
> you useful information without risking dumping shedloads of data.
If you know the binary format here, right?
> For example, a quick look into kernel/irq/devres.c tells me that the
> third resource for mmc0, in the example above, is IRQ 0xa2.
/proc/interrupts ?
> I'm sure I don't need to explain that, when you are debugging, being
> able to rapidly answer questions such as "Am I getting the right IRQ?"
Again, we have a proc file for that :)
> or "How much memory have I allocated?" can save a lot of time.
I've _never_ needed to know that, and I've written a few drivers...
> For known structures it could be expanded to decode the structure.
Then you are embedding a debugger into the kernel :)
> >>diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> >>index 8fa8dea..6a2f125 100644
> >>--- a/drivers/base/Kconfig
> >>+++ b/drivers/base/Kconfig
> >>@@ -177,6 +177,24 @@ config DEBUG_DEVRES
> >>
> >> If you are unsure about this, Say N here.
> >>
> >>+config DEVRES_DEBUGFS
> >>+ bool "Managed device resources debugfs file system"
> >>+ depends on DEBUG_DEVRES
> >>+ help
> >>+ This option enables a debugfs file system related to Managed
> >>+ Resources. When a device allocates a managed resource, with
> >>+ this option enabled, a read-only file with the same name as
> >>+ the device is created in the file system. Reading this file
> >>+ provides some basic debug information about the managed
> >>+ resources allocated to the device.
> >>+
> >>+ The overhead caused by enabling this option is quite small.
> >>+ Specifically, a small memory overhead for each device and a
> >>+ small time overhead at each resource allocation and
> >>+ de-allocation.
> >>+
> >>+ If you are unsure about this, Say N here.
> >>+
> >> config SYS_HYPERVISOR
> >> bool
> >> default n
> >>diff --git a/drivers/base/devres.c b/drivers/base/devres.c
> >>index 5c88a27..41b6465 100644
> >>--- a/drivers/base/devres.c
> >>+++ b/drivers/base/devres.c
> >>@@ -7,9 +7,13 @@
> >> * This file is released under the GPLv2.
> >> */
> >>
> >>+#include <linux/debugfs.h>
> >> #include <linux/device.h>
> >> #include <linux/module.h>
> >>+#include <linux/seq_file.h>
> >> #include <linux/slab.h>
> >>+#include <linux/spinlock.h>
> >>+#include <linux/uaccess.h>
> >
> >why not just make this a separate file, that would remove the #ifdef
> >from this file, right?
>
> Do you mean create a new module? Or as a file to be included?
A separate file.
> I preferred to keep this patch entirely within devres.c, as it feels
> less intrusive that way.
Really?
> If it's in the way, It could as easily go at the end of the file, then
> it would only need a function prototype at the top of the file but it
> could easily be put in another file, the only externals needed would be
> devres_debugfs_create_file() and devres_remove_debugfs_file().
Why not try it as a separate file.
> >>+ if (debugfsdir)
> >>+ /* Create file, n.b. dev goes into inode->i_private */
> >>+ debugfsfile = debugfs_create_file(dev_name(dev), 0444,
> >>+ debugfsdir, dev,
> >>+ &devres_dbgfs_seq_fops);
> >
> >I worry about this, as there is no reason that devices have to have
> >"unique" names in the system. Odds are, there's lots of conflicts,
> >which is why sysfs is a tree, not a flat heirachy.
>
> I don't know for sure about the incidence of repeated device names but
> the code is, I think, safe: if the file already exists, the create
> will fail and no further action will be taken for this device. Any
> subsequent read of the file will just return details of the first
> device.
Then the file will be useless as you don't know which one it really is
for.
On your system, how many different files are listed here? How many were
not able to be listed due to duplicated names?
> If this is common, I could, for example, implement a directory per
> device name. I didn't do it in the first instance to reduce complexity.
Then you are back to the whole sysfs tree, in debugfs, you don't want to
do that :)
> I was reluctant to add a suffix to the device name as that would have
> too high a chance of conflict where there are collections of similar
> devices.
A full "pathname" would be better, but really, I still fail to see the
usefulness of this. How would getting the information here help a user
report to a developer? How would I as a developer ever need the info
here? What situations has this helped you debug, that a "simple" printk
in your code wouldn't have found?
thanks,
greg k-h