2014-10-09 09:03:34

by Jia He

[permalink] [raw]
Subject: [PATCH] staging: rtl8188eu: Fix coding style error problems

Signed-off-by: Jia He <[email protected]>
This fixes all coding style error problems at rtl8188eu which
makes checkpatch.pl unhappy
---
drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
drivers/staging/rtl8188eu/hal/fw.c | 4 ++--
drivers/staging/rtl8188eu/hal/phy.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 4 ++--
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 80e8cc9..3743a72 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
u32 v1 = array[i];
u32 v2 = array[i+1];

- if (v1 < 0xCDCDCDCD){
+ if (v1 < 0xCDCDCDCD) {
phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
udelay(1);
}
@@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
}
}

-static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
+static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)
{
if (addr == 0xfe) {
msleep(50);
diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
index 17b7f37..d6efd54 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
u32 fwsize;
int err;

- if (request_firmware(&fw, fw_name, device)){
+ if (request_firmware(&fw, fw_name, device)) {
dev_err(device, "Firmware %s not available\n", fw_name);
return -ENOENT;
}

if (fw->size > FW_8188E_SIZE) {
- dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
+ dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
FW_8188E_SIZE);
return -1;
}
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index c4f7f35..3f663fe 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -478,7 +478,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
/* 2.4G, decrease power */
{0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
/* 2.4G, increase power */
- {0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
+ {0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
};
u8 thermal_mapping[2][index_mapping_NUM_88E] = {
/* 2.4G, decrease power */
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index c2fac34..8e7a0b1 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
}
}
rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
- &pwrtrac_value);
+ &pwrtrac_value);

if (direction == 1) {
/* Increase TX power */
@@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
/* powerbase1 for HT MCS rates */
static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
u8 *pwr_level_bw20, u8 *pwr_level_bw40,
- u8 channel,u32 *ofdmbase, u32 *mcs_base)
+ u8 channel, u32 *ofdmbase, u32 *mcs_base)
{
struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
u32 powerbase0, powerbase1;
diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
index ddc2f55..5dc11ca 100644
--- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
@@ -164,7 +164,7 @@ do { \
#define B3WIREDATALENGTH 0x800
#define BRFSI_RFENV 0x10

-static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,u32 addr, u32 mask, u32 data)
+static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u32 addr, u32 mask, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
@@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
u32 content = 0x1000; /*RF Content: radio_a_txt*/
u32 maskforphyset = (u32)(content & 0xE000);

- rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
+ rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
RFREG_OFFSET_MASK,
data);
}
--
1.9.3


2014-10-09 09:56:14

by Sudip Mukherjee

[permalink] [raw]
Subject: Re: [PATCH] staging: rtl8188eu: Fix coding style error problems

On Thu, Oct 09, 2014 at 05:03:07PM +0800, Jia He wrote:
> Signed-off-by: Jia He <[email protected]>
> This fixes all coding style error problems at rtl8188eu which
> makes checkpatch.pl unhappy

your commit message should be above your Signed-off line.

mention what type of error you are fixing.

you are doing multiple types of error fix in this patch,
usually we do only a single type of fix in one patch and if you want
to do multiple fix then better send a series of patch , and in each patch
mention what type of error it fixes.

thanks
sudip

> ---
> drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
> drivers/staging/rtl8188eu/hal/fw.c | 4 ++--
> drivers/staging/rtl8188eu/hal/phy.c | 2 +-
> drivers/staging/rtl8188eu/hal/rf.c | 4 ++--
> drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
> 5 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
> index 80e8cc9..3743a72 100644
> --- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
> +++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
> @@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
> u32 v1 = array[i];
> u32 v2 = array[i+1];
>
> - if (v1 < 0xCDCDCDCD){
> + if (v1 < 0xCDCDCDCD) {
> phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
> udelay(1);
> }
> @@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
> }
> }
>
> -static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
> +static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)
> {
> if (addr == 0xfe) {
> msleep(50);
> diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
> index 17b7f37..d6efd54 100644
> --- a/drivers/staging/rtl8188eu/hal/fw.c
> +++ b/drivers/staging/rtl8188eu/hal/fw.c
> @@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
> u32 fwsize;
> int err;
>
> - if (request_firmware(&fw, fw_name, device)){
> + if (request_firmware(&fw, fw_name, device)) {
> dev_err(device, "Firmware %s not available\n", fw_name);
> return -ENOENT;
> }
>
> if (fw->size > FW_8188E_SIZE) {
> - dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
> + dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
> FW_8188E_SIZE);
> return -1;
> }
> diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
> index c4f7f35..3f663fe 100644
> --- a/drivers/staging/rtl8188eu/hal/phy.c
> +++ b/drivers/staging/rtl8188eu/hal/phy.c
> @@ -478,7 +478,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
> /* 2.4G, decrease power */
> {0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
> /* 2.4G, increase power */
> - {0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
> + {0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
> };
> u8 thermal_mapping[2][index_mapping_NUM_88E] = {
> /* 2.4G, decrease power */
> diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
> index c2fac34..8e7a0b1 100644
> --- a/drivers/staging/rtl8188eu/hal/rf.c
> +++ b/drivers/staging/rtl8188eu/hal/rf.c
> @@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
> }
> }
> rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
> - &pwrtrac_value);
> + &pwrtrac_value);
>
> if (direction == 1) {
> /* Increase TX power */
> @@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
> /* powerbase1 for HT MCS rates */
> static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
> u8 *pwr_level_bw20, u8 *pwr_level_bw40,
> - u8 channel,u32 *ofdmbase, u32 *mcs_base)
> + u8 channel, u32 *ofdmbase, u32 *mcs_base)
> {
> struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
> u32 powerbase0, powerbase1;
> diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
> index ddc2f55..5dc11ca 100644
> --- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
> +++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
> @@ -164,7 +164,7 @@ do { \
> #define B3WIREDATALENGTH 0x800
> #define BRFSI_RFENV 0x10
>
> -static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,u32 addr, u32 mask, u32 data)
> +static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u32 addr, u32 mask, u32 data)
> {
> if (addr == 0xfe) {
> mdelay(50);
> @@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
> u32 content = 0x1000; /*RF Content: radio_a_txt*/
> u32 maskforphyset = (u32)(content & 0xE000);
>
> - rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
> + rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
> RFREG_OFFSET_MASK,
> data);
> }
> --
> 1.9.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

2014-10-09 13:54:23

by Jia He

[permalink] [raw]
Subject: [PATCH 0/2] staging: rtl8188eu: Fix a series of coding style problems

This fixes all coding style error problems at rtl8188eu which
makes checkpatch.pl unhappy

Jia He (2):
staging: rtl8188eu: Fix coding style space missing problems
staging: rtl8188eu: Fix coding style not using tab problem

drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
drivers/staging/rtl8188eu/hal/fw.c | 4 ++--
drivers/staging/rtl8188eu/hal/phy.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 4 ++--
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)

--
1.9.3

2014-10-09 13:54:34

by Jia He

[permalink] [raw]
Subject: [PATCH 1/2] staging: rtl8188eu: Fix coding style space missing problems

This fixes space missing problems,eg. before '-', after ',', around
'|'

Signed-off-by: Jia He <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
drivers/staging/rtl8188eu/hal/fw.c | 4 ++--
drivers/staging/rtl8188eu/hal/phy.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 2 +-
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 80e8cc9..3743a72 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
u32 v1 = array[i];
u32 v2 = array[i+1];

- if (v1 < 0xCDCDCDCD){
+ if (v1 < 0xCDCDCDCD) {
phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
udelay(1);
}
@@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
}
}

-static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
+static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)
{
if (addr == 0xfe) {
msleep(50);
diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
index 17b7f37..d6efd54 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
u32 fwsize;
int err;

- if (request_firmware(&fw, fw_name, device)){
+ if (request_firmware(&fw, fw_name, device)) {
dev_err(device, "Firmware %s not available\n", fw_name);
return -ENOENT;
}

if (fw->size > FW_8188E_SIZE) {
- dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
+ dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
FW_8188E_SIZE);
return -1;
}
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index c4f7f35..3f663fe 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -478,7 +478,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
/* 2.4G, decrease power */
{0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
/* 2.4G, increase power */
- {0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
+ {0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
};
u8 thermal_mapping[2][index_mapping_NUM_88E] = {
/* 2.4G, decrease power */
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index c2fac34..eea4c8a 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
/* powerbase1 for HT MCS rates */
static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
u8 *pwr_level_bw20, u8 *pwr_level_bw40,
- u8 channel,u32 *ofdmbase, u32 *mcs_base)
+ u8 channel, u32 *ofdmbase, u32 *mcs_base)
{
struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
u32 powerbase0, powerbase1;
diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
index ddc2f55..5dc11ca 100644
--- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
@@ -164,7 +164,7 @@ do { \
#define B3WIREDATALENGTH 0x800
#define BRFSI_RFENV 0x10

-static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,u32 addr, u32 mask, u32 data)
+static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u32 addr, u32 mask, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
@@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
u32 content = 0x1000; /*RF Content: radio_a_txt*/
u32 maskforphyset = (u32)(content & 0xE000);

- rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
+ rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
RFREG_OFFSET_MASK,
data);
}
--
1.9.3

2014-10-09 13:54:57

by Jia He

[permalink] [raw]
Subject: [PATCH 2/2] staging: rtl8188eu: Fix coding style not using tab problem

This fixes "ERROR: code indent should use tabs where possible"

Signed-off-by: Jia He <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/hal/rf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index eea4c8a..8e7a0b1 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
}
}
rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
- &pwrtrac_value);
+ &pwrtrac_value);

if (direction == 1) {
/* Increase TX power */
--
1.9.3

2014-10-09 14:36:21

by Joe Perches

[permalink] [raw]
Subject: Re: [PATCH 1/2] staging: rtl8188eu: Fix coding style space missing problems

On Thu, 2014-10-09 at 21:53 +0800, Jia He wrote:
> This fixes space missing problems,eg. before '-', after ',', around
> '|'

I'd just say horizontal whitespace.

You can mostly update these style defect more comprehensively by using:
$ git checkout drivers/staging/rtl8188eu/
$ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING

Do be sure to verify the output by using git diff -w,
verifying the changes yourself, and using scripts/objdiff
on all objects.

If you submit a patch based on that sequence above,
do mention how you've verified it.

> diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
[]
> @@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
> }
> }
>
> -static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
> +static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)

Suboptimal conversion here.
There should be no space before the comma after bit_mask.

btw: here's the unverified output of that sequence above:

drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_ieee80211.c | 16 +++++-----
drivers/staging/rtl8188eu/core/rtw_mlme.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c | 22 +++++++-------
drivers/staging/rtl8188eu/core/rtw_pwrctrl.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_recv.c | 12 ++++----
drivers/staging/rtl8188eu/core/rtw_security.c | 20 ++++++-------
drivers/staging/rtl8188eu/core/rtw_sta_mgt.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_xmit.c | 10 +++----
drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 +--
drivers/staging/rtl8188eu/hal/fw.c | 8 ++---
drivers/staging/rtl8188eu/hal/mac_cfg.c | 2 +-
drivers/staging/rtl8188eu/hal/odm.c | 8 ++---
drivers/staging/rtl8188eu/hal/odm_HWConfig.c | 2 +-
drivers/staging/rtl8188eu/hal/odm_RTL8188E.c | 2 +-
drivers/staging/rtl8188eu/hal/phy.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 2 +-
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 +--
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c | 2 +-
drivers/staging/rtl8188eu/hal/usb_halinit.c | 2 +-
drivers/staging/rtl8188eu/include/ieee80211_ext.h | 20 ++++++-------
drivers/staging/rtl8188eu/include/odm_debug.h | 2 +-
drivers/staging/rtl8188eu/include/osdep_service.h | 4 +--
drivers/staging/rtl8188eu/include/rtw_debug.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_led.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_mlme_ext.h | 26 ++++++++--------
drivers/staging/rtl8188eu/include/wifi.h | 36 +++++++++++------------
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 4 +--
drivers/staging/rtl8188eu/os_dep/os_intfs.c | 2 +-
drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c | 4 +--
drivers/staging/rtl8188eu/os_dep/xmit_linux.c | 2 +-
32 files changed, 116 insertions(+), 116 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 9935e66..7b59a10 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -638,7 +638,7 @@ u8 rtw_setstakey_cmd(struct adapter *padapter, u8 *psta, u8 unicast_key)
ether_addr_copy(psetstakey_para->addr, sta->hwaddr);

if (check_fwstate(pmlmepriv, WIFI_STATION_STATE))
- psetstakey_para->algorithm = (unsigned char) psecuritypriv->dot11PrivacyAlgrthm;
+ psetstakey_para->algorithm = (unsigned char)psecuritypriv->dot11PrivacyAlgrthm;
else
GET_ENCRY_ALGO(psecuritypriv, sta, psetstakey_para->algorithm, false);

diff --git a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
index 755d3ef..f2c3ca7 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ieee80211.c
@@ -159,7 +159,7 @@ u8 *rtw_set_ie
return pbuf + len + 2;
}

-inline u8 *rtw_set_ie_ch_switch (u8 *buf, u32 *buf_len, u8 ch_switch_mode,
+inline u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
u8 new_ch, u8 ch_switch_cnt)
{
u8 ie_data[3];
@@ -870,7 +870,7 @@ static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
if (elen < 4) {
if (show_errors) {
DBG_88E("short vendor specific information element ignored (len=%lu)\n",
- (unsigned long) elen);
+ (unsigned long)elen);
}
return -1;
}
@@ -890,7 +890,7 @@ static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
case WME_OUI_TYPE: /* this is a Wi-Fi WME info. element */
if (elen < 5) {
DBG_88E("short WME information element ignored (len=%lu)\n",
- (unsigned long) elen);
+ (unsigned long)elen);
return -1;
}
switch (pos[4]) {
@@ -905,7 +905,7 @@ static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
break;
default:
DBG_88E("unknown WME information element ignored (subtype=%d len=%lu)\n",
- pos[4], (unsigned long) elen);
+ pos[4], (unsigned long)elen);
return -1;
}
break;
@@ -916,7 +916,7 @@ static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
break;
default:
DBG_88E("Unknown Microsoft information element ignored (type=%d len=%lu)\n",
- pos[3], (unsigned long) elen);
+ pos[3], (unsigned long)elen);
return -1;
}
break;
@@ -929,13 +929,13 @@ static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
break;
default:
DBG_88E("Unknown Broadcom information element ignored (type=%d len=%lu)\n",
- pos[3], (unsigned long) elen);
+ pos[3], (unsigned long)elen);
return -1;
}
break;
default:
DBG_88E("unknown vendor specific information element ignored (vendor OUI %02x:%02x:%02x len=%lu)\n",
- pos[0], pos[1], pos[2], (unsigned long) elen);
+ pos[0], pos[1], pos[2], (unsigned long)elen);
return -1;
}
return 0;
@@ -969,7 +969,7 @@ enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len,
if (elen > left) {
if (show_errors) {
DBG_88E("IEEE 802.11 element parse failed (id=%d elen=%d left=%lu)\n",
- id, elen, (unsigned long) left);
+ id, elen, (unsigned long)left);
}
return ParseFailed;
}
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme.c b/drivers/staging/rtl8188eu/core/rtw_mlme.c
index 149c271..6c3c588 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme.c
@@ -2117,7 +2117,7 @@ void rtw_issue_addbareq_cmd(struct adapter *padapter, struct xmit_frame *pxmitfr
if (0 == issued) {
DBG_88E("rtw_issue_addbareq_cmd, p=%d\n", priority);
psta->htpriv.candidate_tid_bitmap |= BIT((u8)priority);
- rtw_addbareq_cmd(padapter, (u8) priority, pattrib->ra);
+ rtw_addbareq_cmd(padapter, (u8)priority, pattrib->ra);
}
}
}
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
index 5ba5099..63d89bb 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
@@ -227,7 +227,7 @@ static void init_mlme_ext_priv_value(struct adapter *padapter)
pmlmeext->cur_channel = padapter->registrypriv.channel;
pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
- pmlmeext->oper_channel = pmlmeext->cur_channel ;
+ pmlmeext->oper_channel = pmlmeext->cur_channel;
pmlmeext->oper_bwmode = pmlmeext->cur_bwmode;
pmlmeext->oper_ch_offset = pmlmeext->cur_ch_offset;
pmlmeext->retry = 0;
@@ -2000,7 +2000,7 @@ void issue_beacon(struct adapter *padapter, int timeout_ms)
DBG_88E("%s, alloc mgnt frame fail\n", __func__);
return;
}
-#if defined (CONFIG_88EU_AP_MODE)
+#if defined(CONFIG_88EU_AP_MODE)
spin_lock_bh(&pmlmepriv->bcn_update_lock);
#endif /* if defined (CONFIG_88EU_AP_MODE) */

@@ -2027,7 +2027,7 @@ void issue_beacon(struct adapter *padapter, int timeout_ms)
SetFrameSubType(pframe, WIFI_BEACON);

pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
- pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
+ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);

if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
int len_diff;
@@ -2042,8 +2042,8 @@ void issue_beacon(struct adapter *padapter, int timeout_ms)
);
pframe += (cur_network->IELength+len_diff);
pattrib->pktlen += (cur_network->IELength+len_diff);
- wps_ie = rtw_get_wps_ie(pmgntframe->buf_addr+TXDESC_OFFSET+sizeof (struct rtw_ieee80211_hdr_3addr)+_BEACON_IE_OFFSET_,
- pattrib->pktlen-sizeof (struct rtw_ieee80211_hdr_3addr)-_BEACON_IE_OFFSET_, NULL, &wps_ielen);
+ wps_ie = rtw_get_wps_ie(pmgntframe->buf_addr+TXDESC_OFFSET+sizeof(struct rtw_ieee80211_hdr_3addr)+_BEACON_IE_OFFSET_,
+ pattrib->pktlen-sizeof(struct rtw_ieee80211_hdr_3addr)-_BEACON_IE_OFFSET_, NULL, &wps_ielen);
if (wps_ie && wps_ielen > 0)
rtw_get_wps_attr_content(wps_ie, wps_ielen, WPS_ATTR_SELECTED_REGISTRAR, (u8 *)(&sr), NULL);
if (sr != 0)
@@ -2101,7 +2101,7 @@ void issue_beacon(struct adapter *padapter, int timeout_ms)
/* todo:HT for adhoc */
_issue_bcn:

-#if defined (CONFIG_88EU_AP_MODE)
+#if defined(CONFIG_88EU_AP_MODE)
pmlmepriv->update_bcn = false;

spin_unlock_bh(&pmlmepriv->bcn_update_lock);
@@ -2130,7 +2130,7 @@ void issue_probersp(struct adapter *padapter, unsigned char *da, u8 is_valid_p2p
__le16 *fctrl;
unsigned char *mac, *bssid;
struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
-#if defined (CONFIG_88EU_AP_MODE)
+#if defined(CONFIG_88EU_AP_MODE)
u8 *pwps_ie;
uint wps_ielen;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
@@ -2323,8 +2323,8 @@ static int _issue_probereq(struct adapter *padapter, struct ndis_802_11_ssid *ps
pmlmeext->mgnt_seq++;
SetFrameSubType(pframe, WIFI_PROBEREQ);

- pframe += sizeof (struct rtw_ieee80211_hdr_3addr);
- pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
+ pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
+ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);

if (pssid)
pframe = rtw_set_ie(pframe, _SSID_IE_, pssid->SsidLength, pssid->Ssid, &(pattrib->pktlen));
@@ -3209,7 +3209,7 @@ exit:
return ret;
}

-void issue_action_spct_ch_switch (struct adapter *padapter, u8 *ra, u8 new_ch, u8 ch_offset)
+void issue_action_spct_ch_switch(struct adapter *padapter, u8 *ra, u8 new_ch, u8 ch_offset)
{
struct xmit_frame *pmgntframe;
struct pkt_attrib *pattrib;
@@ -3260,7 +3260,7 @@ void issue_action_spct_ch_switch (struct adapter *padapter, u8 *ra, u8 new_ch, u
pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
}

- pframe = rtw_set_ie_ch_switch (pframe, &(pattrib->pktlen), 0, new_ch, 0);
+ pframe = rtw_set_ie_ch_switch(pframe, &(pattrib->pktlen), 0, new_ch, 0);
pframe = rtw_set_ie_secondary_ch_offset(pframe, &(pattrib->pktlen),
hal_ch_offset_to_secondary_ch_offset(ch_offset));

diff --git a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
index 27ed83c..481c187 100644
--- a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
@@ -527,7 +527,7 @@ void rtw_init_pwrctrl_priv(struct adapter *padapter)

pwrctrlpriv->LpsIdleCount = 0;
if (padapter->registrypriv.mp_mode == 1)
- pwrctrlpriv->power_mgnt = PS_MODE_ACTIVE ;
+ pwrctrlpriv->power_mgnt = PS_MODE_ACTIVE;
else
pwrctrlpriv->power_mgnt = padapter->registrypriv.power_mgnt;/* PS_MODE_MIN; */
pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt) ? true : false;
diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 4d56dba..273fbb1 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -46,7 +46,7 @@ void rtw_signal_stat_timer_hdl(RTW_TIMER_HDL_ARGS);
void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv)
{

- memset((u8 *)psta_recvpriv, 0, sizeof (struct sta_recv_priv));
+ memset((u8 *)psta_recvpriv, 0, sizeof(struct sta_recv_priv));

spin_lock_init(&psta_recvpriv->lock);

@@ -109,7 +109,7 @@ exit:
return res;
}

-void _rtw_free_recv_priv (struct recv_priv *precvpriv)
+void _rtw_free_recv_priv(struct recv_priv *precvpriv)
{
struct adapter *padapter = precvpriv->adapter;

@@ -124,7 +124,7 @@ void _rtw_free_recv_priv (struct recv_priv *precvpriv)

}

-struct recv_frame *_rtw_alloc_recvframe (struct __queue *pfree_recv_queue)
+struct recv_frame *_rtw_alloc_recvframe(struct __queue *pfree_recv_queue)
{
struct recv_frame *hdr;
struct list_head *plist, *phead;
@@ -797,7 +797,7 @@ exit:
return ret;
}

-static int ap2sta_data_frame (
+static int ap2sta_data_frame(
struct adapter *adapter,
struct recv_frame *precv_frame,
struct sta_info **psta)
@@ -1266,7 +1266,7 @@ static int validate_recv_frame(struct adapter *adapter,
u8 bDumpRxPkt;
struct rx_pkt_attrib *pattrib = &precv_frame->attrib;
u8 *ptr = precv_frame->rx_data;
- u8 ver = (unsigned char) (*ptr)&0x3;
+ u8 ver = (unsigned char)(*ptr)&0x3;
struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;


@@ -1981,7 +1981,7 @@ static int process_recv_indicatepkts(struct adapter *padapter,
}
}
} else { /* B/G mode */
- retval = wlanhdr_to_ethhdr (prframe);
+ retval = wlanhdr_to_ethhdr(prframe);
if (retval != _SUCCESS) {
RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("wlanhdr_to_ethhdr: drop pkt\n"));
return retval;
diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c
index f9096a5..9c0a8d1 100644
--- a/drivers/staging/rtl8188eu/core/rtw_security.c
+++ b/drivers/staging/rtl8188eu/core/rtw_security.c
@@ -189,7 +189,7 @@ void rtw_wep_encrypt(struct adapter *padapter, u8 *pxmitframe)
arcfour_encrypt(&mycontext, payload+length, crc, 4);

pframe += pxmitpriv->frag_len;
- pframe = (u8 *) round_up((size_t)(pframe), 4);
+ pframe = (u8 *)round_up((size_t)(pframe), 4);
}
}
}
@@ -258,7 +258,7 @@ static void secmicputuint32(u8 *p, u32 val)
{
long i;
for (i = 0; i < 4; i++) {
- *p++ = (u8) (val & 0xff);
+ *p++ = (u8)(val & 0xff);
val >>= 8;
}
}
@@ -621,14 +621,14 @@ u32 rtw_tkip_encrypt(struct adapter *padapter, u8 *pxmitframe)
arcfour_encrypt(&mycontext, payload, payload, length);
arcfour_encrypt(&mycontext, payload+length, crc, 4);
} else {
- length = pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ;
+ length = pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len;
*((__le32 *)crc) = getcrc32(payload, length);/* modified by Amy*/
arcfour_init(&mycontext, rc4key, 16);
arcfour_encrypt(&mycontext, payload, payload, length);
arcfour_encrypt(&mycontext, payload+length, crc, 4);

pframe += pxmitpriv->frag_len;
- pframe = (u8 *) round_up((size_t)(pframe), 4);
+ pframe = (u8 *)round_up((size_t)(pframe), 4);
}
}
} else {
@@ -953,8 +953,8 @@ static void construct_mic_iv(u8 *mic_iv, int qc_exists, int a4_exists, u8 *mpdu,
mic_iv[i] = mpdu[i + 8]; /* mic_iv[2:7] = A2[0:5] = mpdu[10:15] */
for (i = 8; i < 14; i++)
mic_iv[i] = pn_vector[13 - i]; /* mic_iv[8:13] = PN[5:0] */
- mic_iv[14] = (unsigned char) (payload_length / 256);
- mic_iv[15] = (unsigned char) (payload_length % 256);
+ mic_iv[14] = (unsigned char)(payload_length / 256);
+ mic_iv[15] = (unsigned char)(payload_length % 256);
}

/************************************************/
@@ -1045,8 +1045,8 @@ static void construct_ctr_preload(u8 *ctr_preload, int a4_exists, int qc_exists,
ctr_preload[i] = mpdu[i + 8]; /* ctr_preload[2:7] = A2[0:5] = mpdu[10:15] */
for (i = 8; i < 14; i++)
ctr_preload[i] = pn_vector[13 - i]; /* ctr_preload[8:13] = PN[5:0] */
- ctr_preload[14] = (unsigned char) (c / 256); /* Ctr */
- ctr_preload[15] = (unsigned char) (c % 256);
+ ctr_preload[14] = (unsigned char)(c / 256); /* Ctr */
+ ctr_preload[15] = (unsigned char)(c % 256);
}

/************************************/
@@ -1238,11 +1238,11 @@ u32 rtw_aes_encrypt(struct adapter *padapter, u8 *pxmitframe)

aes_cipher(prwskey, pattrib->hdrlen, pframe, length);
} else{
- length = pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ;
+ length = pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len;

aes_cipher(prwskey, pattrib->hdrlen, pframe, length);
pframe += pxmitpriv->frag_len;
- pframe = (u8 *) round_up((size_t)(pframe), 8);
+ pframe = (u8 *)round_up((size_t)(pframe), 8);
}
}
} else{
diff --git a/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c b/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
index e1dc8fa..dc9d0dd 100644
--- a/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
@@ -29,7 +29,7 @@

static void _rtw_init_stainfo(struct sta_info *psta)
{
- memset((u8 *)psta, 0, sizeof (struct sta_info));
+ memset((u8 *)psta, 0, sizeof(struct sta_info));

spin_lock_init(&psta->lock);
INIT_LIST_HEAD(&psta->list);
diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 639ace0..46c4579 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -37,7 +37,7 @@ static void _init_txservq(struct tx_servq *ptxservq)

void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv)
{
- memset((unsigned char *)psta_xmitpriv, 0, sizeof (struct sta_xmit_priv));
+ memset((unsigned char *)psta_xmitpriv, 0, sizeof(struct sta_xmit_priv));
spin_lock_init(&psta_xmitpriv->lock);
_init_txservq(&psta_xmitpriv->be_q);
_init_txservq(&psta_xmitpriv->bk_q);
@@ -223,7 +223,7 @@ exit:
return res;
}

-void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv)
+void _rtw_free_xmit_priv(struct xmit_priv *pxmitpriv)
{
int i;
struct adapter *padapter = pxmitpriv->adapter;
@@ -691,7 +691,7 @@ static s32 xmitframe_addmic(struct adapter *padapter, struct xmit_frame *pxmitfr
payload = pframe;

for (curfragnum = 0; curfragnum < pattrib->nr_frags; curfragnum++) {
- payload = (u8 *) round_up((size_t)(payload), 4);
+ payload = (u8 *)round_up((size_t)(payload), 4);
RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_,
("=== curfragnum=%d, pframe = 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x,!!!\n",
curfragnum, *payload, *(payload+1),
@@ -772,7 +772,7 @@ static s32 xmitframe_swencrypt(struct adapter *padapter, struct xmit_frame *pxmi
return _SUCCESS;
}

-s32 rtw_make_wlanhdr (struct adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib)
+s32 rtw_make_wlanhdr(struct adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib)
{
u16 *qc;

@@ -1098,7 +1098,7 @@ s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt, struct

addr = (size_t)(pframe);

- mem_start = (unsigned char *) round_up(addr, 4) + hw_hdr_offset;
+ mem_start = (unsigned char *)round_up(addr, 4) + hw_hdr_offset;
memcpy(mem_start, pbuf_start + hw_hdr_offset, pattrib->hdrlen);
}

diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 80e8cc9..3743a72 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
u32 v1 = array[i];
u32 v2 = array[i+1];

- if (v1 < 0xCDCDCDCD){
+ if (v1 < 0xCDCDCDCD) {
phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
udelay(1);
}
@@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
}
}

-static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
+static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)
{
if (addr == 0xfe) {
msleep(50);
diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
index 17b7f37..3b28754 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -84,7 +84,7 @@ static void _rtl88e_fw_block_write(struct adapter *adapt,
static void _rtl88e_fill_dummy(u8 *pfwbuf, u32 *pfwlen)
{
u32 fwlen = *pfwlen;
- u8 remain = (u8) (fwlen % 4);
+ u8 remain = (u8)(fwlen % 4);

remain = (remain == 0) ? 0 : (4 - remain);

@@ -101,7 +101,7 @@ static void _rtl88e_fw_page_write(struct adapter *adapt,
u32 page, const u8 *buffer, u32 size)
{
u8 value8;
- u8 u8page = (u8) (page & 0x07);
+ u8 u8page = (u8)(page & 0x07);

value8 = (usb_read8(adapt, REG_MCUFWDL + 2) & 0xF8) | u8page;

@@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
u32 fwsize;
int err;

- if (request_firmware(&fw, fw_name, device)){
+ if (request_firmware(&fw, fw_name, device)) {
dev_err(device, "Firmware %s not available\n", fw_name);
return -ENOENT;
}

if (fw->size > FW_8188E_SIZE) {
- dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
+ dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
FW_8188E_SIZE);
return -1;
}
diff --git a/drivers/staging/rtl8188eu/hal/mac_cfg.c b/drivers/staging/rtl8188eu/hal/mac_cfg.c
index c0e7fa9..febc83a 100644
--- a/drivers/staging/rtl8188eu/hal/mac_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/mac_cfg.c
@@ -127,7 +127,7 @@ bool rtl88eu_phy_mac_config(struct adapter *adapt)
ptrarray = array_MAC_REG_8188E;

for (i = 0; i < arraylength; i = i + 2)
- usb_write8(adapt, ptrarray[i], (u8) ptrarray[i + 1]);
+ usb_write8(adapt, ptrarray[i], (u8)ptrarray[i + 1]);

usb_write8(adapt, REG_MAX_AGGR_NUM, MAX_AGGR_NUM);
return true;
diff --git a/drivers/staging/rtl8188eu/hal/odm.c b/drivers/staging/rtl8188eu/hal/odm.c
index e4df837..9873998 100644
--- a/drivers/staging/rtl8188eu/hal/odm.c
+++ b/drivers/staging/rtl8188eu/hal/odm.c
@@ -437,8 +437,8 @@ void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm)
{
struct adapter *adapter = pDM_Odm->Adapter;

- pDM_Odm->bCckHighPower = (bool) phy_query_bb_reg(adapter, 0x824, BIT9);
- pDM_Odm->RFPathRxEnable = (u8) phy_query_bb_reg(adapter, 0xc04, 0x0F);
+ pDM_Odm->bCckHighPower = (bool)phy_query_bb_reg(adapter, 0x824, BIT9);
+ pDM_Odm->RFPathRxEnable = (u8)phy_query_bb_reg(adapter, 0xc04, 0x0F);

ODM_InitDebugSetting(pDM_Odm);
}
@@ -529,7 +529,7 @@ void odm_DIGInit(struct odm_dm_struct *pDM_Odm)
struct adapter *adapter = pDM_Odm->Adapter;
struct rtw_dig *pDM_DigTable = &pDM_Odm->DM_DigTable;

- pDM_DigTable->CurIGValue = (u8) phy_query_bb_reg(adapter, ODM_REG_IGI_A_11N, ODM_BIT_IGI_11N);
+ pDM_DigTable->CurIGValue = (u8)phy_query_bb_reg(adapter, ODM_REG_IGI_A_11N, ODM_BIT_IGI_11N);
pDM_DigTable->RssiLowThresh = DM_DIG_THRESH_LOW;
pDM_DigTable->RssiHighThresh = DM_DIG_THRESH_HIGH;
pDM_DigTable->FALowThresh = DM_false_ALARM_THRESH_LOW;
@@ -620,7 +620,7 @@ void odm_DIG(struct odm_dm_struct *pDM_Odm)
} else if (pDM_Odm->SupportAbility & ODM_BB_ANT_DIV) {
/* 1 Lower Bound for 88E AntDiv */
if (pDM_Odm->AntDivType == CG_TRX_HW_ANTDIV) {
- DIG_Dynamic_MIN = (u8) pDM_DigTable->AntDiv_RSSI_max;
+ DIG_Dynamic_MIN = (u8)pDM_DigTable->AntDiv_RSSI_max;
ODM_RT_TRACE(pDM_Odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD,
("odm_DIG(): pDM_DigTable->AntDiv_RSSI_max=%d\n",
pDM_DigTable->AntDiv_RSSI_max));
diff --git a/drivers/staging/rtl8188eu/hal/odm_HWConfig.c b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
index 4e4e219..29f87df 100644
--- a/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
@@ -118,7 +118,7 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,

cck_highpwr = dm_odm->bCckHighPower;

- cck_agc_rpt = pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a ;
+ cck_agc_rpt = pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a;

/* 2011.11.28 LukeLee: 88E use different LNA & VGA gain table */
/* The RSSI formula should be modified according to the gain table */
diff --git a/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c b/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
index 5342af7..d3c6873 100644
--- a/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
+++ b/drivers/staging/rtl8188eu/hal/odm_RTL8188E.c
@@ -278,7 +278,7 @@ static void rtl88eu_dm_hw_ant_div(struct odm_dm_struct *dm_odm)
struct rtw_dig *dig_table = &dm_odm->DM_DigTable;
struct sta_info *entry;
u32 i, min_rssi = 0xFF, ant_div_max_rssi = 0, max_rssi = 0;
- u32 local_min_rssi,local_max_rssi;
+ u32 local_min_rssi, local_max_rssi;
u32 main_rssi, aux_rssi;
u8 RxIdleAnt = 0, target_ant = 7;

diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index c4f7f35..3f663fe 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -478,7 +478,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
/* 2.4G, decrease power */
{0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
/* 2.4G, increase power */
- {0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
+ {0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
};
u8 thermal_mapping[2][index_mapping_NUM_88E] = {
/* 2.4G, decrease power */
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index c2fac34..eea4c8a 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
/* powerbase1 for HT MCS rates */
static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
u8 *pwr_level_bw20, u8 *pwr_level_bw40,
- u8 channel,u32 *ofdmbase, u32 *mcs_base)
+ u8 channel, u32 *ofdmbase, u32 *mcs_base)
{
struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
u32 powerbase0, powerbase1;
diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
index ddc2f55..5dc11ca 100644
--- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
@@ -164,7 +164,7 @@ do { \
#define B3WIREDATALENGTH 0x800
#define BRFSI_RFENV 0x10

-static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,u32 addr, u32 mask, u32 data)
+static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u32 addr, u32 mask, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
@@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
u32 content = 0x1000; /*RF Content: radio_a_txt*/
u32 maskforphyset = (u32)(content & 0xE000);

- rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
+ rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
RFREG_OFFSET_MASK,
data);
}
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 023a3d8..ce78b3c 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -254,7 +254,7 @@ void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt)
{
u8 opmode, macid;
u16 mst_rpt = le16_to_cpu(mstatus_rpt);
- opmode = (u8) mst_rpt;
+ opmode = (u8)mst_rpt;
macid = (u8)(mst_rpt >> 8);

DBG_88E("### %s: MStatus=%x MACID=%d\n", __func__, opmode, macid);
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
index be9eede..594c1da 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
@@ -399,7 +399,7 @@ static s32 rtw_dump_xframe(struct adapter *adapt, struct xmit_frame *pxmitframe)

mem_addr += w_sz;

- mem_addr = (u8 *) round_up((size_t)mem_addr, 4);
+ mem_addr = (u8 *)round_up((size_t)mem_addr, 4);
}

rtw_free_xmitframe(pxmitpriv, pxmitframe);
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index caf2ca3..6e46f4e 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -2012,7 +2012,7 @@ static u8 SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eV
u8 bRSSIDump = *((u8 *)pValue);
struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
if (bRSSIDump)
- dm_ocm->DebugComponents = ODM_COMP_DIG|ODM_COMP_FA_CNT ;
+ dm_ocm->DebugComponents = ODM_COMP_DIG|ODM_COMP_FA_CNT;
else
dm_ocm->DebugComponents = 0;
}
diff --git a/drivers/staging/rtl8188eu/include/ieee80211_ext.h b/drivers/staging/rtl8188eu/include/ieee80211_ext.h
index 1052d18..15e53d3 100644
--- a/drivers/staging/rtl8188eu/include/ieee80211_ext.h
+++ b/drivers/staging/rtl8188eu/include/ieee80211_ext.h
@@ -103,24 +103,24 @@ struct wme_parameter_element {

#define WPA_PUT_LE16(a, val) \
do { \
- (a)[1] = ((u16) (val)) >> 8; \
- (a)[0] = ((u16) (val)) & 0xff; \
+ (a)[1] = ((u16)(val)) >> 8; \
+ (a)[0] = ((u16)(val)) & 0xff; \
} while (0)

#define WPA_PUT_BE32(a, val) \
do { \
- (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
- (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
- (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
- (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ (a)[0] = (u8)((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8)((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8)((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8)(((u32) (val)) & 0xff); \
} while (0)

#define WPA_PUT_LE32(a, val) \
do { \
- (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
- (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
- (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
- (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ (a)[3] = (u8)((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8)((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8)((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8)(((u32) (val)) & 0xff); \
} while (0)

#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
diff --git a/drivers/staging/rtl8188eu/include/odm_debug.h b/drivers/staging/rtl8188eu/include/odm_debug.h
index db7b44e..7ca7358a 100644
--- a/drivers/staging/rtl8188eu/include/odm_debug.h
+++ b/drivers/staging/rtl8188eu/include/odm_debug.h
@@ -125,7 +125,7 @@
DbgPrint(title_str); \
DbgPrint(" "); \
for (__i = 0; __i < 6; __i++) \
- DbgPrint("%02X%s", __ptr[__i], (__i == 5)?"":"-");\
+ DbgPrint("%02X%s", __ptr[__i], (__i == 5) ? "" : "-");\
DbgPrint("\n"); \
}

diff --git a/drivers/staging/rtl8188eu/include/osdep_service.h b/drivers/staging/rtl8188eu/include/osdep_service.h
index fed9c86..82f58f8 100644
--- a/drivers/staging/rtl8188eu/include/osdep_service.h
+++ b/drivers/staging/rtl8188eu/include/osdep_service.h
@@ -182,8 +182,8 @@ u64 rtw_modular64(u64 x, u64 y);

/* Macros for handling unaligned memory accesses */

-#define RTW_GET_BE24(a) ((((u32) (a)[0]) << 16) | (((u32) (a)[1]) << 8) | \
- ((u32) (a)[2]))
+#define RTW_GET_BE24(a) ((((u32)(a)[0]) << 16) | (((u32) (a)[1]) << 8) | \
+ ((u32)(a)[2]))

void rtw_buf_free(u8 **buf, u32 *buf_len);
void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len);
diff --git a/drivers/staging/rtl8188eu/include/rtw_debug.h b/drivers/staging/rtl8188eu/include/rtw_debug.h
index a38616e..971bf45 100644
--- a/drivers/staging/rtl8188eu/include/rtw_debug.h
+++ b/drivers/staging/rtl8188eu/include/rtw_debug.h
@@ -106,7 +106,7 @@ extern u32 GlobalDebugLevel;
u8 *ptr = (u8 *)_hexdata; \
pr_info("%s", DRIVER_PREFIX); \
pr_info(_titlestring); \
- for (__i = 0; __i < (int)_hexdatalen; __i++ ) { \
+ for (__i = 0; __i < (int)_hexdatalen; __i++) { \
pr_info("%02X%s", ptr[__i], \
(((__i + 1) % 4) == 0) ? \
" " : " "); \
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index c5194b6..dec8dbc 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -92,7 +92,7 @@ struct LED_871x {

void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction);

-struct led_priv{
+struct led_priv {
/* add for led control */
struct LED_871x SwLed0;
u8 bRegUseLed;
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
index d699ca1..8d72ccf 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
@@ -448,7 +448,7 @@ struct mlme_ext_priv {

int init_mlme_ext_priv(struct adapter *adapter);
int init_hw_mlme_ext(struct adapter *padapter);
-void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext);
+void free_mlme_ext_priv(struct mlme_ext_priv *pmlmeext);
extern void init_mlme_ext_timer(struct adapter *padapter);
extern void init_addba_retry_timer(struct adapter *adapt, struct sta_info *sta);
extern struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv);
@@ -646,8 +646,8 @@ void mlmeext_sta_add_event_callback(struct adapter *padapter,

void linked_status_chk(struct adapter *padapter);

-void survey_timer_hdl (void *function_context);
-void link_timer_hdl (void *funtion_context);
+void survey_timer_hdl(void *function_context);
+void link_timer_hdl(void *funtion_context);
void addba_timer_hdl(void *function_context);

#define set_survey_timer(mlmeext, ms) \
@@ -708,15 +708,15 @@ u8 tdls_hdl(struct adapter *padapter, unsigned char *pbuf);
#ifdef _RTW_CMD_C_

static struct cmd_hdl wlancmds[] = {
- GEN_MLME_EXT_HANDLER(sizeof (struct wlan_bssid_ex), join_cmd_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct disconnect_parm), disconnect_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct wlan_bssid_ex), createbss_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct setopmode_parm), setopmode_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct sitesurvey_parm), sitesurvey_cmd_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct setauth_parm), setauth_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct setkey_parm), setkey_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct set_stakey_parm), set_stakey_hdl)
- GEN_MLME_EXT_HANDLER(sizeof (struct set_assocsta_parm), NULL)
+ GEN_MLME_EXT_HANDLER(sizeof(struct wlan_bssid_ex), join_cmd_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct disconnect_parm), disconnect_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct wlan_bssid_ex), createbss_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct setopmode_parm), setopmode_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct sitesurvey_parm), sitesurvey_cmd_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct setauth_parm), setauth_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct setkey_parm), setkey_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct set_stakey_parm), set_stakey_hdl)
+ GEN_MLME_EXT_HANDLER(sizeof(struct set_assocsta_parm), NULL)
GEN_MLME_EXT_HANDLER(sizeof(struct addBaReq_parm), add_ba_hdl)
GEN_MLME_EXT_HANDLER(sizeof(struct set_ch_parm), set_ch_hdl)
GEN_MLME_EXT_HANDLER(sizeof(struct wlan_bssid_ex), tx_beacon_hdl)
@@ -787,7 +787,7 @@ static struct fwevent wlanevents[] = {
{0, NULL},
{0, NULL},
{0, &rtw_survey_event_callback}, /*8*/
- {sizeof (struct surveydone_event), &rtw_surveydone_event_callback},/*9*/
+ {sizeof(struct surveydone_event), &rtw_surveydone_event_callback},/*9*/
{0, &rtw_joinbss_event_callback}, /*10*/
{sizeof(struct stassoc_event), &rtw_stassoc_event_callback},
{sizeof(struct stadel_event), &rtw_stadel_event_callback},
diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h
index a88ebf4..8dbdfaf 100644
--- a/drivers/staging/rtl8188eu/include/wifi.h
+++ b/drivers/staging/rtl8188eu/include/wifi.h
@@ -766,27 +766,27 @@ enum ht_cap_ampdu_factor {
#define OP_MODE_20MHZ_HT_STA_ASSOCED 2
#define OP_MODE_MIXED 3

-#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1))
-#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0))
-#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1))
-#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH ((u8) BIT(2))
-#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3))
-#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY ((u8) BIT(4))
-#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY ((u8) BIT(5))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8)BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8)BIT(0))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8)BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH ((u8)BIT(2))
+#define HT_INFO_HT_PARAM_RIFS_MODE ((u8)BIT(3))
+#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY ((u8)BIT(4))
+#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY ((u8)BIT(5))

#define HT_INFO_OPERATION_MODE_OP_MODE_MASK \
- ((u16) (0x0001 | 0x0002))
+ ((u16)(0x0001 | 0x0002))
#define HT_INFO_OPERATION_MODE_OP_MODE_OFFSET 0
-#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT ((u8) BIT(2))
-#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8) BIT(3))
-#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8) BIT(4))
-
-#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16) BIT(6))
-#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16) BIT(7))
-#define HT_INFO_STBC_PARAM_SECONDARY_BC ((u16) BIT(8))
-#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16) BIT(9))
-#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16) BIT(10))
-#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16) BIT(11))
+#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT ((u8)BIT(2))
+#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8)BIT(3))
+#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8)BIT(4))
+
+#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16)BIT(6))
+#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16)BIT(7))
+#define HT_INFO_STBC_PARAM_SECONDARY_BC ((u16)BIT(8))
+#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16)BIT(9))
+#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16)BIT(10))
+#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16)BIT(11))

/* ===============WPS Section=============== */
/* For WPSv1.0 */
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index d598fec..874af68 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -361,7 +361,7 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
param->u.crypt.err = 0;
param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';

- if (param_len < (u32) ((u8 *)param->u.crypt.key - (u8 *)param) + param->u.crypt.key_len) {
+ if (param_len < (u32)((u8 *)param->u.crypt.key - (u8 *)param) + param->u.crypt.key_len) {
ret = -EINVAL;
goto exit;
}
@@ -2059,7 +2059,7 @@ static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
struct ieee_param *param;
uint ret = 0;

- if (p->length < sizeof(struct ieee_param) || !p->pointer) {
+ if (p->length < sizeof(struct ieee_param)|| !p->pointer) {
ret = -EINVAL;
goto out;
}
diff --git a/drivers/staging/rtl8188eu/os_dep/os_intfs.c b/drivers/staging/rtl8188eu/os_dep/os_intfs.c
index 08a80f7..0b488d2 100644
--- a/drivers/staging/rtl8188eu/os_dep/os_intfs.c
+++ b/drivers/staging/rtl8188eu/os_dep/os_intfs.c
@@ -527,7 +527,7 @@ static uint loadparam(struct adapter *padapter, struct net_device *pnetdev)

registry_par->channel = (u8)rtw_channel;
registry_par->wireless_mode = (u8)rtw_wireless_mode;
- registry_par->vrtl_carrier_sense = (u8)rtw_vrtl_carrier_sense ;
+ registry_par->vrtl_carrier_sense = (u8)rtw_vrtl_carrier_sense;
registry_par->vcs_type = (u8)rtw_vcs_type;
registry_par->rts_thresh = (u16)rtw_rts_thresh;
registry_par->frag_thresh = (u16)rtw_frag_thresh;
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c b/drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c
index ba1e178..d459a81 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c
@@ -160,10 +160,10 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
switch (haldata->UsbRxAggMode) {
case USB_RX_AGG_DMA:
case USB_RX_AGG_MIX:
- pkt_offset = (u16) round_up(pkt_offset, 128);
+ pkt_offset = (u16)round_up(pkt_offset, 128);
break;
case USB_RX_AGG_USB:
- pkt_offset = (u16) round_up(pkt_offset, 4);
+ pkt_offset = (u16)round_up(pkt_offset, 4);
break;
case USB_RX_AGG_DISABLE:
default:
diff --git a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
index 0ce47b0..d5e41a5 100644
--- a/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/xmit_linux.c
@@ -46,7 +46,7 @@ void _rtw_open_pktfile(struct sk_buff *pktptr, struct pkt_file *pfile)

}

-uint _rtw_pktfile_read (struct pkt_file *pfile, u8 *rmem, uint rlen)
+uint _rtw_pktfile_read(struct pkt_file *pfile, u8 *rmem, uint rlen)
{
uint len = 0;



2014-10-13 05:55:37

by Jia He

[permalink] [raw]
Subject: Re: [PATCH 1/2] staging: rtl8188eu: Fix coding style space missing problems

Thanks for the suggestion, I will update it later

On Thu, 09 Oct 2014 07:35:59 -0700 from [email protected] wrote:
> git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
> xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING