2014-10-28 12:27:50

by Aya Mahfouz

[permalink] [raw]
Subject: [PATCH v2] sound: pci: pcxhr: convert timeval to ktime_t

This patch is concerned with migrating the time variables in the pcxhr
module found in the sound driver. The changes are concerend with the
y2038 problem where timeval will overflow in the year 2038. ktime_t
was used instead of timeval to get the wall time. The difference
is displayed now in nanoseconds instead of microseconds.

Signed-off-by: Aya Mahfouz <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
---
v2: changed variables names to avoid redeclaration conflicts.

sound/pci/pcxhr/pcxhr.c | 10 ++++++----
sound/pci/pcxhr/pcxhr_core.c | 10 ++++++----
2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index b854fc5..7c33c97 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -711,8 +711,9 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
int playback_mask = 0;

#ifdef CONFIG_SND_DEBUG_VERBOSE
- struct timeval my_tv1, my_tv2;
- do_gettimeofday(&my_tv1);
+ ktime_t start_time, stop_time, diff_time;
+
+ start_time = ktime_get();
#endif
mutex_lock(&mgr->setup_mutex);

@@ -823,9 +824,10 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
mutex_unlock(&mgr->setup_mutex);

#ifdef CONFIG_SND_DEBUG_VERBOSE
- do_gettimeofday(&my_tv2);
+ stop_time = ktime_get();
+ diff_time = ktime_sub(stop_time, start_time);
dev_dbg(&mgr->pci->dev, "***TRIGGER START*** TIME = %ld (err = %x)\n",
- (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
+ (long)(ktime_to_ns(diff_time)), err);
#endif
}

diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c
index a584acb..181f772 100644
--- a/sound/pci/pcxhr/pcxhr_core.c
+++ b/sound/pci/pcxhr/pcxhr_core.c
@@ -910,8 +910,9 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
int audio_mask;

#ifdef CONFIG_SND_DEBUG_VERBOSE
- struct timeval my_tv1, my_tv2;
- do_gettimeofday(&my_tv1);
+ ktime_t start_time, stop_time, diff_time;
+
+ start_time = ktime_get();
#endif
audio_mask = (playback_mask |
(capture_mask << PCXHR_PIPE_STATE_CAPTURE_OFFSET));
@@ -960,9 +961,10 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
return err;
}
#ifdef CONFIG_SND_DEBUG_VERBOSE
- do_gettimeofday(&my_tv2);
+ stop_time = ktime_get();
+ diff_time = ktime_sub(stop_time, start_time);
dev_dbg(&mgr->pci->dev, "***SET PIPE STATE*** TIME = %ld (err = %x)\n",
- (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
+ (long)(ktime_to_ns(diff_time)), err);
#endif
return 0;
}
--
1.9.3


2014-10-28 14:08:48

by Takashi Iwai

[permalink] [raw]
Subject: Re: [PATCH v2] sound: pci: pcxhr: convert timeval to ktime_t

At Tue, 28 Oct 2014 14:27:44 +0200,
Aya Mahfouz wrote:
>
> This patch is concerned with migrating the time variables in the pcxhr
> module found in the sound driver. The changes are concerend with the
> y2038 problem where timeval will overflow in the year 2038. ktime_t
> was used instead of timeval to get the wall time. The difference
> is displayed now in nanoseconds instead of microseconds.
>
> Signed-off-by: Aya Mahfouz <[email protected]>
> Reviewed-by: Arnd Bergmann <[email protected]>
> ---
> v2: changed variables names to avoid redeclaration conflicts.

Applied, thanks.


Takashi

>
> sound/pci/pcxhr/pcxhr.c | 10 ++++++----
> sound/pci/pcxhr/pcxhr_core.c | 10 ++++++----
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
> index b854fc5..7c33c97 100644
> --- a/sound/pci/pcxhr/pcxhr.c
> +++ b/sound/pci/pcxhr/pcxhr.c
> @@ -711,8 +711,9 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
> int playback_mask = 0;
>
> #ifdef CONFIG_SND_DEBUG_VERBOSE
> - struct timeval my_tv1, my_tv2;
> - do_gettimeofday(&my_tv1);
> + ktime_t start_time, stop_time, diff_time;
> +
> + start_time = ktime_get();
> #endif
> mutex_lock(&mgr->setup_mutex);
>
> @@ -823,9 +824,10 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
> mutex_unlock(&mgr->setup_mutex);
>
> #ifdef CONFIG_SND_DEBUG_VERBOSE
> - do_gettimeofday(&my_tv2);
> + stop_time = ktime_get();
> + diff_time = ktime_sub(stop_time, start_time);
> dev_dbg(&mgr->pci->dev, "***TRIGGER START*** TIME = %ld (err = %x)\n",
> - (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
> + (long)(ktime_to_ns(diff_time)), err);
> #endif
> }
>
> diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c
> index a584acb..181f772 100644
> --- a/sound/pci/pcxhr/pcxhr_core.c
> +++ b/sound/pci/pcxhr/pcxhr_core.c
> @@ -910,8 +910,9 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
> int audio_mask;
>
> #ifdef CONFIG_SND_DEBUG_VERBOSE
> - struct timeval my_tv1, my_tv2;
> - do_gettimeofday(&my_tv1);
> + ktime_t start_time, stop_time, diff_time;
> +
> + start_time = ktime_get();
> #endif
> audio_mask = (playback_mask |
> (capture_mask << PCXHR_PIPE_STATE_CAPTURE_OFFSET));
> @@ -960,9 +961,10 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
> return err;
> }
> #ifdef CONFIG_SND_DEBUG_VERBOSE
> - do_gettimeofday(&my_tv2);
> + stop_time = ktime_get();
> + diff_time = ktime_sub(stop_time, start_time);
> dev_dbg(&mgr->pci->dev, "***SET PIPE STATE*** TIME = %ld (err = %x)\n",
> - (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
> + (long)(ktime_to_ns(diff_time)), err);
> #endif
> return 0;
> }
> --
> 1.9.3
>