On Thu, Nov 06, 2014 at 11:58:32PM +0000, Vick, Matthew wrote:
> On 11/5/14, 11:36 AM, "Jeff Kirsher" <[email protected]> wrote:
>
> >On Wed, 2014-11-05 at 10:26 -0800, Joe Stringer wrote:
> >> On 5 November 2014 04:47, Jeff Kirsher <[email protected]>
> >>wrote:
> >> >
> >> > On Wed, 2014-11-05 at 14:44 +0200, Or Gerlitz wrote:
> >> > > On Wed, Nov 5, 2014 at 2:34 PM, Jeff Kirsher
> >> > > <[email protected]> wrote:
> >> > > > On Tue, 2014-11-04 at 13:56 -0800, Joe Stringer wrote:
> >> > > >> ndo_gso_check() was recently introduced to allow NICs to report
> >>the
> >> > > >> offloading support that they have on a per-skb basis. Add an
> >> > > >> implementation for this driver which checks for something that
> >>looks
> >> > > >> like VXLAN.
> >> > > >>
> >> > > >> Implementation shamelessly stolen from Tom Herbert:
> >> > > >> http://thread.gmane.org/gmane.linux.network/332428/focus=333111
> >> > > >>
> >> > > >> Signed-off-by: Joe Stringer <[email protected]>
> >> > > >> ---
> >> > > >> Should this driver report support for GSO on packets with tunnel
> >> > > >> headers
> >> > > >> up to 64B like the i40e driver does?
> >> > > >> ---
> >> > > >> drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 12
> >>++++++++++++
> >> > > >> 1 file changed, 12 insertions(+)
> >> > > >
> >> > > > Thanks Joe, I will add your patch to my queue.
> >> > >
> >> > > Hi Jeff, please see my comment on patch 0/5, we're essentially
> >> > > replicating the same helper four different times (fm10k, mlx4,
> >>benet,
> >> > > qlgc) - I don't see the point in doing so. I asked Joe to come up
> >>with
> >> > > one generic helper and then to pick it up by the four drivers, makes
> >> > > sense?
> >> >
> >> > Yeah, I just saw your reply Or. Ok, I will await an update to Joe's
> >> > series, thanks!
> >>
> >> Thanks Or/Jeff.
> >>
> >> There is also the question in the commit message above, perhaps fm10k
> >> support is a bit different - wasn't sure who to ask regarding that.
> >
> >Matthew Vick is the fm10k maintainer now and can answer any fm10k
> >questions you may have.
>
> Hi Joe, fm10k's hardware is pretty lax about the header size. As long as
> the total header length (outer+inner) is 184 bytes or less we're golden,
> so if I'm not mistaken that leaves us with a max of 130 bytes beyond the
> tunnel header.
Oh, okay. To be more explicit, in the case of UDP tunnels I take it that
you're talking about L2+L3+(L4+)tunnel+L2+L3+L4 <= 184? (L4 perhaps
optional depending on the tunnel protocol used)
In that case, the fm10k_gso_check would use something closer to
"skb_inner_transport_header(skb) - skb_mac_header(skb) > 184", or
perhaps 164 to allow for inner L4 header (?).
Joe