This version of patchset contains following style changes since v5:
- nodes sorted in alphabetical order;
- pinctrl entries sorted alphabetically;
- new line inserted between nodes.
Audio on phyFLEX boards is presented by tlv320aic3007 codec connected
over SSI interface.
Signed-off-by: Dmitry Lavnikevich <[email protected]>
---
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 101 ++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 ++++
2 files changed, 114 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index f1bdcae..6b2c892 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -9,10 +9,96 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
/ {
chosen {
linux,stdout-path = &uart4;
};
+
+ regulators {
+ sound_1v8: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "i2s-audio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ sound_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "i2s-audio-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ tlv320_mclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "tlv320-mclk";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "OnboardTLV320AIC3007";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "Speaker", "SPOP",
+ "Speaker", "SPOM",
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&tlv320_mclk>;
+ };
+ };
+
+};
+
+&audmux {
+ status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ pins5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ 0x00000000
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
};
&fec {
@@ -30,9 +116,16 @@
&i2c2 {
status = "okay";
- tlv320@18 {
- compatible = "ti,tlv320aic3x";
+ codec: tlv320@18 {
+ compatible = "ti,tlv320aic3007";
+ #sound-dai-cells = <0>;
reg = <0x18>;
+ ai3x-micbias-vg = <2>;
+
+ AVDD-supply = <&sound_3v3>;
+ IOVDD-supply = <&sound_3v3>;
+ DRVDD-supply = <&sound_3v3>;
+ DVDD-supply = <&sound_1v8>;
};
stmpe@41 {
@@ -55,6 +148,10 @@
status = "okay";
};
+&ssi2 {
+ status = "okay";
+};
+
&uart3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index aa22756..ab3b1f9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -58,6 +58,12 @@
};
};
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "disabled";
+};
+
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
@@ -319,6 +325,15 @@
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0
+ MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ >;
+ };
};
};
--
2.1.2
Since pins and frequency are specific to module (pfla02), not base board
(pbab02), it is better to be initialized in corresponding dts file.
This patch fixes i2c2, i2c3 pin configuration which caused messages:
imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp
imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp
imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp
imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp
Signed-off-by: Dmitry Lavnikevich <[email protected]>
---
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 22 ----------------------
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 26 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index 5847212..f1bdcae 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -28,9 +28,6 @@
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock-frequency = <100000>;
status = "okay";
tlv320@18 {
@@ -55,9 +52,6 @@
};
&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- clock-frequency = <100000>;
status = "okay";
};
@@ -84,19 +78,3 @@
&usdhc3 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 0e50bb0..aa22756 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -162,6 +162,18 @@
};
};
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
@@ -235,6 +247,20 @@
>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
--
2.1.2
Used on Phytec PBAB01 board.
Signed-off-by: Dmitry Lavnikevich <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 8fca6e2..cac07d6 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -210,6 +210,7 @@ CONFIG_SND_SOC_IMX_WM8962=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
--
2.1.2
On Tue, Nov 04, 2014 at 04:05:47PM +0300, Dmitry Lavnikevich wrote:
> Since pins and frequency are specific to module (pfla02), not base board
> (pbab02), it is better to be initialized in corresponding dts file.
>
> This patch fixes i2c2, i2c3 pin configuration which caused messages:
>
> imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp
> imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp
> imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp
> imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp
>
> Signed-off-by: Dmitry Lavnikevich <[email protected]>
Applied all 3, thanks.