2014-11-14 22:32:29

by Dmitry Torokhov

Subject: [PATCH] NFC: st21nfca: fix error handling of irq_of_parse_and_map

Return value of irq_of_parse_and_map() is unsigned int, with 0
indicating failure, so testing for negative result never works.

Also report error returned by devm_gpio_request_one instead of
clobbering it with -ENODEV.

Signed-off-by: Dmitry Torokhov <[email protected]>
---
drivers/nfc/st21nfca/i2c.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index 0ea756b..6d6d282 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -531,20 +531,19 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
"clf_enable");
if (r) {
nfc_err(&client->dev, "Failed to request enable pin\n");
- return -ENODEV;
+ return r;
}

phy->gpio_ena = gpio;

/* IRQ */
- r = irq_of_parse_and_map(pp, 0);
- if (r < 0) {
- nfc_err(&client->dev, "Unable to get irq, error: %d\n", r);
- return r;
+ client->irq = irq_of_parse_and_map(pp, 0);
+ if (!client->irq) {
+ nfc_err(&client->dev, "Unable to get irq\n");
+ return -EINVAL;
}

phy->irq_polarity = irq_get_trigger_type(r);
- client->irq = r;

return 0;
}
--
2.1.0.rc2.206.gedb03e5


--
Dmitry

2014-11-15 20:48:58

by Christophe Ricard

Subject: Re: [PATCH] NFC: st21nfca: fix error handling of irq_of_parse_and_map

Hi Dmitry,

Thank you for your feedback.
A patch got already pushed earlier this month:
https://lists.01.org/pipermail/linux-nfc/2014-November/003123.html

The i2c-core is already running the i2c_of_parse_and_map function when
registering the slave device when using dts. This step got removed for
this reason.

However, i will take into account your second point in order to report
devm_gpio_request_one instead of -ENODEV in a future patchset.

Best Regards
Christophe

On Fri, 14 Nov 2014 14:32:24 -0800
Dmitry Torokhov <[email protected]> wrote:

> Return value of irq_of_parse_and_map() is unsigned int, with 0
> indicating failure, so testing for negative result never works.
>
> Also report error returned by devm_gpio_request_one instead of
> clobbering it with -ENODEV.
>
> Signed-off-by: Dmitry Torokhov <[email protected]>
> ---
> drivers/nfc/st21nfca/i2c.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
> index 0ea756b..6d6d282 100644
> --- a/drivers/nfc/st21nfca/i2c.c
> +++ b/drivers/nfc/st21nfca/i2c.c
> @@ -531,20 +531,19 @@ static int
> st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
> "clf_enable"); if (r) {
> nfc_err(&client->dev, "Failed to request enable
> pin\n");
> - return -ENODEV;
> + return r;
> }
>
> phy->gpio_ena = gpio;
>
> /* IRQ */
> - r = irq_of_parse_and_map(pp, 0);
> - if (r < 0) {
> - nfc_err(&client->dev, "Unable to get irq, error:
> %d\n", r);
> - return r;
> + client->irq = irq_of_parse_and_map(pp, 0);
> + if (!client->irq) {
> + nfc_err(&client->dev, "Unable to get irq\n");
> + return -EINVAL;
> }
>
> phy->irq_polarity = irq_get_trigger_type(r);
> - client->irq = r;
>
> return 0;
> }