1/ change request_module call to zero-pad single digit
family numbers. This appears to be the intention of
the code, but not what it actually does.
This means that the alias created for W1_FAMILY_SMEM_01
might actually be useful.
2/ Define a family name for the BQ27000 battery charge monitor.
Unfortunately this is the same number as W1_FAMILY_SMEM_01
so if both a compiled on a system, one module might need to
be blacklisted.
3/ Add a MODULE_ALIAS for the bq27000.
Acked-by: Evgeniy Polyakov <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
---
Hi Greg,
appreciate it if you could queue this up for whenever.
Thanks,
NeilBrown
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
index afbefed5f2c9..caafb1722783 100644
--- a/drivers/w1/slaves/w1_bq27000.c
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -88,7 +88,7 @@ static struct w1_family_ops w1_bq27000_fops = {
};
static struct w1_family w1_bq27000_family = {
- .fid = 1,
+ .fid = W1_FAMILY_BQ27000,
.fops = &w1_bq27000_fops,
};
@@ -111,7 +111,7 @@ module_exit(w1_bq27000_exit);
module_param(F_ID, int, S_IRUSR);
MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
-
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Texas Instruments Ltd");
MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 592f7edc671e..181f41cb960b 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -727,7 +727,7 @@ int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
/* slave modules need to be loaded in a context with unlocked mutex */
mutex_unlock(&dev->mutex);
- request_module("w1-family-0x%0x", rn->family);
+ request_module("w1-family-0x%02x", rn->family);
mutex_lock(&dev->mutex);
spin_lock(&w1_flock);
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 0d18365b61ad..ed5dcb80a1f7 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -27,6 +27,7 @@
#include <linux/atomic.h>
#define W1_FAMILY_DEFAULT 0
+#define W1_FAMILY_BQ27000 0x01
#define W1_FAMILY_SMEM_01 0x01
#define W1_FAMILY_SMEM_81 0x81
#define W1_THERM_DS18S20 0x10