From: Gyungoh Yoo <[email protected]>
This patch set includes regulator and backlight driver for SKY81452.
Also it includes documents for device tree and module.
The initial version of sky81452-regulator was applied. Fo this, incremental
patches are included.
v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT
Changed the DT parsing of regulator using regulator_node and of_match
v7:
Modified licensing text to GPLv2
Splitted Kconfig renaming from DT patch
v6:
Added new line character at the end of line of dev_err()
v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Modified sky81452-regulator to return EINVAL when of_node is NULL
Move sky81452-backlight.h to include/linux/platform_data
v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Removed calling to backlight_device_unregister() in sky81452-backlight
v3:
Cleaned-up DBG messages
Cleaned-up DT
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages
Modified sky81452-regulator to return ENODATA when of_node is NULL
v2:
Split the patches for each sub-system
Added 'reg' attribute for I2C address in device tree documents
Added 'compatible' attribute in child drivers
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors.
Added vendor prefix for Skyworks Solutions, Inc.
Add SKY81452 to the Trivial Devices list
Gyungoh Yoo (8):
mfd: Add support for Skyworks SKY81452 driver
backlight: Add support Skyworks SKY81452 backlight driver
devicetree: mfd: Add new SKY81452 mfd binding
devicetree: backlight: Add new SKY81452 backlight binding
devicetree: Add vendor prefix for Skyworks Solutions, Inc.
devicetree: i2c: Add SKY81452 to the Trivial Devices list
regulator: sky81452: Modify Device Tree structure
devicetree: regulator: sky81452: Modify Device Tree structure
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
Documentation/devicetree/bindings/mfd/sky81452.txt | 36 +++
.../bindings/regulator/sky81452-regulator.txt | 10 +-
.../devicetree/bindings/vendor-prefixes.txt | 1 +
.../video/backlight/sky81452-backlight.txt | 29 ++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sky81452.c | 108 +++++++
drivers/regulator/sky81452-regulator.c | 46 +--
drivers/video/backlight/Kconfig | 10 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/sky81452-backlight.c | 340 +++++++++++++++++++++
include/linux/mfd/sky81452.h | 31 ++
include/linux/platform_data/sky81452-backlight.h | 46 +++
14 files changed, 631 insertions(+), 41 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
create mode 100644 drivers/mfd/sky81452.c
create mode 100644 drivers/video/backlight/sky81452-backlight.c
create mode 100644 include/linux/mfd/sky81452.h
create mode 100644 include/linux/platform_data/sky81452-backlight.h
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
Acked-by: Lee Jones <[email protected]>
---
Changes v8:
Nothing
Changes v7:
Modified licensing text to GPLv2
Changes v6:
Added new line character at the end of line of dev_err()
Changes v5:
Move sky81452-backlight.h to include/linux/platform_data
Changes v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Changes v3:
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages
Changes v2:
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors
drivers/mfd/Kconfig | 12 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/sky81452.c | 108 +++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/sky81452.h | 31 +++++++++++++
4 files changed, 152 insertions(+)
create mode 100644 drivers/mfd/sky81452.c
create mode 100644 include/linux/mfd/sky81452.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea7..a54244c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -693,6 +693,18 @@ config MFD_SM501_GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
+config MFD_SKY81452
+ tristate "Skyworks Solutions SKY81452"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ This is the core driver for the Skyworks SKY81452 backlight and
+ voltage regulator device.
+
+ This driver can also be built as a module. If so, the module
+ will be called sky81452.
+
config MFD_SMSC
bool "SMSC ECE1099 series chips"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8bd54b1..d9683ea 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_SKY81452) += sky81452.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
new file mode 100644
index 0000000..b0c9b04
--- /dev/null
+++ b/drivers/mfd/sky81452.c
@@ -0,0 +1,108 @@
+/*
+ * sky81452.c SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/sky81452.h>
+
+static const struct regmap_config sky81452_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int sky81452_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ const struct sky81452_platform_data *pdata = dev_get_platdata(dev);
+ struct mfd_cell cells[2];
+ struct regmap *regmap;
+ int ret;
+
+ if (!pdata) {
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &sky81452_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to initialize.err=%ld\n", PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ i2c_set_clientdata(client, regmap);
+
+ memset(cells, 0, sizeof(cells));
+ cells[0].name = "sky81452-backlight";
+ cells[0].of_compatible = "skyworks,sky81452-backlight";
+ cells[0].platform_data = pdata->bl_pdata;
+ cells[0].pdata_size = sizeof(*pdata->bl_pdata);
+ cells[1].name = "sky81452-regulator";
+ cells[1].platform_data = pdata->regulator_init_data;
+ cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
+
+ ret = mfd_add_devices(dev, -1, cells, ARRAY_SIZE(cells), NULL, 0, NULL);
+ if (ret)
+ dev_err(dev, "failed to add child devices. err=%d\n", ret);
+
+ return ret;
+}
+
+static int sky81452_remove(struct i2c_client *client)
+{
+ mfd_remove_devices(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id sky81452_ids[] = {
+ { "sky81452" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sky81452_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_of_match[] = {
+ { .compatible = "skyworks,sky81452", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sky81452_of_match);
+#endif
+
+static struct i2c_driver sky81452_driver = {
+ .driver = {
+ .name = "sky81452",
+ .of_match_table = of_match_ptr(sky81452_of_match),
+ },
+ .probe = sky81452_probe,
+ .remove = sky81452_remove,
+ .id_table = sky81452_ids,
+};
+
+module_i2c_driver(sky81452_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 MFD driver");
+MODULE_AUTHOR("Gyungoh Yoo <[email protected]>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
new file mode 100644
index 0000000..b0925fa
--- /dev/null
+++ b/include/linux/mfd/sky81452.h
@@ -0,0 +1,31 @@
+/*
+ * sky81452.h SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_H
+#define _SKY81452_H
+
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/regulator/machine.h>
+
+struct sky81452_platform_data {
+ struct sky81452_bl_platform_data *bl_pdata;
+ struct regulator_init_data *regulator_init_data;
+};
+
+#endif
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Changes v7:
Modified licensing text to GPLv2
Changes v6:
Added new line character at the end of line of dev_err()
Changes v5:
Move sky81452-backlight.h to include/linux/platform_data
Changes v4:
Reordering header files for readability
Removed calling to backlight_device_unregister()
Removed MODULE_VERSION()
Modified license to GPLv2
Changes v3:
Modified DBG messages
Changes v2:
Added 'compatible' attribute in the driver
Added message for exception or errors
drivers/video/backlight/Kconfig | 10 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/sky81452-backlight.c | 340 +++++++++++++++++++++++
include/linux/platform_data/sky81452-backlight.h | 46 +++
4 files changed, 397 insertions(+)
create mode 100644 drivers/video/backlight/sky81452-backlight.c
create mode 100644 include/linux/platform_data/sky81452-backlight.h
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 8d03924..2586fdd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
If you have a Pandora console, say Y to enable the
backlight driver.
+config BACKLIGHT_SKY81452
+ tristate "Backlight driver for SKY81452"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
+ help
+ If you have a Skyworks SKY81452, say Y to enable the
+ backlight driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called sky81452-backlight
+
config BACKLIGHT_TPS65217
tristate "TPS65217 Backlight"
depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fcd50b73..d67073f 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
new file mode 100644
index 0000000..45e575f
--- /dev/null
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -0,0 +1,340 @@
+/*
+ * sky81452-backlight.c SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/slab.h>
+
+/* registers */
+#define SKY81452_REG0 0x00
+#define SKY81452_REG1 0x01
+#define SKY81452_REG2 0x02
+#define SKY81452_REG4 0x04
+#define SKY81452_REG5 0x05
+
+/* bit mask */
+#define SKY81452_CS 0xFF
+#define SKY81452_EN 0x3F
+#define SKY81452_IGPW 0x20
+#define SKY81452_PWMMD 0x10
+#define SKY81452_PHASE 0x08
+#define SKY81452_ILIM 0x04
+#define SKY81452_VSHRT 0x03
+#define SKY81452_OCP 0x80
+#define SKY81452_OTMP 0x40
+#define SKY81452_SHRT 0x3F
+#define SKY81452_OPN 0x3F
+
+#define SKY81452_DEFAULT_NAME "lcd-backlight"
+#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1)
+
+#define CTZ(b) __builtin_ctz(b)
+
+static int sky81452_bl_update_status(struct backlight_device *bd)
+{
+ const struct sky81452_bl_platform_data *pdata =
+ dev_get_platdata(bd->dev.parent);
+ const unsigned int brightness = (unsigned int)bd->props.brightness;
+ struct regmap *regmap = bl_get_data(bd);
+ int ret;
+
+ if (brightness > 0) {
+ ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+ pdata->enable << CTZ(SKY81452_EN));
+ }
+
+ return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
+}
+
+static int sky81452_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static const struct backlight_ops sky81452_bl_ops = {
+ .update_status = sky81452_bl_update_status,
+ .get_brightness = sky81452_bl_get_brightness,
+};
+
+static ssize_t sky81452_bl_store_enable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned long value;
+ int ret;
+
+ ret = kstrtoul(buf, 16, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+ value << CTZ(SKY81452_EN));
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ return count;
+}
+
+static ssize_t sky81452_bl_show_open_short(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned int reg, value = 0;
+ char tmp[3];
+ int i, ret;
+
+ reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
+ ret = regmap_read(regmap, reg, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ if (value & SKY81452_SHRT) {
+ *buf = 0;
+ for (i = 0; i < 6; i++) {
+ if (value & 0x01) {
+ sprintf(tmp, "%d ", i + 1);
+ strcat(buf, tmp);
+ }
+ value >>= 1;
+ }
+ strcat(buf, "\n");
+ } else {
+ strcpy(buf, "none\n");
+ }
+
+ return strlen(buf);
+}
+
+static ssize_t sky81452_bl_show_fault(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned int value = 0;
+ int ret;
+
+ ret = regmap_read(regmap, SKY81452_REG4, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ *buf = 0;
+
+ if (value & SKY81452_OCP)
+ strcat(buf, "over-current ");
+
+ if (value & SKY81452_OTMP)
+ strcat(buf, "over-temperature");
+
+ strcat(buf, "\n");
+ return strlen(buf);
+}
+
+static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
+static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
+
+static struct attribute *sky81452_bl_attribute[] = {
+ &dev_attr_enable.attr,
+ &dev_attr_open.attr,
+ &dev_attr_short.attr,
+ &dev_attr_fault.attr,
+ NULL
+};
+
+static const struct attribute_group sky81452_bl_attr_group = {
+ .attrs = sky81452_bl_attribute,
+};
+
+#ifdef CONFIG_OF
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+ struct device *dev)
+{
+ struct device_node *np = of_node_get(dev->of_node);
+ struct sky81452_bl_platform_data *pdata;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "backlight node not found.\n");
+ return ERR_PTR(-ENODATA);
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ of_node_put(np);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ of_property_read_string(np, "name", &pdata->name);
+ pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
+ pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
+ pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
+ pdata->gpio_enable = of_get_gpio(np, 0);
+
+ ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
+ if (IS_ERR_VALUE(ret))
+ pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
+
+ ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
+ &pdata->short_detection_threshold);
+ if (IS_ERR_VALUE(ret))
+ pdata->short_detection_threshold = 7;
+
+ ret = of_property_read_u32(np, "skyworks,current-limit",
+ &pdata->boost_current_limit);
+ if (IS_ERR_VALUE(ret))
+ pdata->boost_current_limit = 2750;
+
+ of_node_put(np);
+ return pdata;
+}
+#else
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+ struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int sky81452_bl_init_device(struct regmap *regmap,
+ struct sky81452_bl_platform_data *pdata)
+{
+ unsigned int value;
+
+ value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
+ value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
+ value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
+
+ if (pdata->boost_current_limit == 2300)
+ value |= SKY81452_ILIM;
+ else if (pdata->boost_current_limit != 2750)
+ return -EINVAL;
+
+ if (pdata->short_detection_threshold < 4 ||
+ pdata->short_detection_threshold > 7)
+ return -EINVAL;
+ value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
+
+ return regmap_write(regmap, SKY81452_REG2, value);
+}
+
+static int sky81452_bl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap = dev_get_drvdata(dev->parent);
+ struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ const char *name;
+ int ret;
+
+ if (!pdata) {
+ pdata = sky81452_bl_parse_dt(dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ }
+
+ if (gpio_is_valid(pdata->gpio_enable)) {
+ ret = devm_gpio_request_one(dev, pdata->gpio_enable,
+ GPIOF_OUT_INIT_HIGH, "sky81452-en");
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to request GPIO. err=%d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = sky81452_bl_init_device(regmap, pdata);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to initialize. err=%d\n", ret);
+ return ret;
+ }
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = SKY81452_MAX_BRIGHTNESS,
+ name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
+ bd = devm_backlight_device_register(dev, name, dev, regmap,
+ &sky81452_bl_ops, &props);
+ if (IS_ERR(bd)) {
+ dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
+ return PTR_ERR(bd);
+ }
+
+ platform_set_drvdata(pdev, bd);
+
+ ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to create attribute. err=%d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sky81452_bl_remove(struct platform_device *pdev)
+{
+ const struct sky81452_bl_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ struct backlight_device *bd = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ if (gpio_is_valid(pdata->gpio_enable))
+ gpio_set_value_cansleep(pdata->gpio_enable, 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_bl_of_match[] = {
+ { .compatible = "skyworks,sky81452-backlight", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
+#endif
+
+static struct platform_driver sky81452_bl_driver = {
+ .driver = {
+ .name = "sky81452-backlight",
+ .of_match_table = of_match_ptr(sky81452_bl_of_match),
+ },
+ .probe = sky81452_bl_probe,
+ .remove = sky81452_bl_remove,
+};
+
+module_platform_driver(sky81452_bl_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
+MODULE_AUTHOR("Gyungoh Yoo <[email protected]>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
new file mode 100644
index 0000000..1231e9b
--- /dev/null
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -0,0 +1,46 @@
+/*
+ * sky81452.h SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_BACKLIGHT_H
+#define _SKY81452_BACKLIGHT_H
+
+/**
+ * struct sky81452_platform_data
+ * @name: backlight driver name.
+ If it is not defined, default name is lcd-backlight.
+ * @gpio_enable:GPIO number which control EN pin
+ * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm: true if DPWMI should be ignored.
+ * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit: It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+ const char *name;
+ int gpio_enable;
+ unsigned int enable;
+ bool ignore_pwm;
+ bool dpwm_mode;
+ bool phase_shift;
+ unsigned int short_detection_threshold;
+ unsigned int boost_current_limit;
+};
+
+#endif
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Made up the example for backlight DT
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added reg attribute for I2C slave address
Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000..ab71473
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,36 @@
+SKY81452 bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452"
+- reg : I2C slave address
+
+Required child nodes:
+- backlight : container node for backlight following the binding
+ in video/backlight/sky81452-backlight.txt
+- regulator : container node for regulators following the binding
+ in regulator/sky81452-regulator.txt
+
+Example:
+
+ sky81452@2c {
+ compatible = "skyworks,sky81452";
+ reg = <0x2c>;
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ skyworks,en-channels = <0x3f>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,ovp-level = <20>;
+ skyworks,current-limit = <2300>;
+ };
+
+ regulator {
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
+ };
+ };
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added reg attribute for I2C slave address
.../video/backlight/sky81452-backlight.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000..8daebf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name : Name of backlight device. Default is 'lcd-backlight'.
+- gpios : GPIO to use to EN pin.
+ See Documentation/devicetree/bindings/gpio/gpio.txt
+- skyworks,en-channels : Enable mask for current sink channel 1 to 6.
+- skyworks,ignore-pwm : Ignore both PWM input
+- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift : Enable phase shift mode
+- skyworks,ovp-level : Over-voltage protection level.
+ Should be between 14 or 28V.
+- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit : It should be 2300mA or 2750mA.
+
+Example:
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ skyworks,en-channels = <0x3f>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,ovp-level = <20>;
+ skyworks,current-limit = <2300>;
+ };
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Nothing
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added vendor prefix for Skyworks Solutions, Inc.
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a344ec2..68143f0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,6 +140,7 @@ sii Seiko Instruments, Inc.
silergy Silergy Corp.
sirf SiRF Technology, Inc.
sitronix Sitronix Technology Corporation
+skyworks Skyworks Solutions, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Nothing
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Add SKY81452 to the Trivial Devices list
Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index fbde415..122fa1e 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -77,6 +77,7 @@ ramtron,24c64 i2c serial eeprom (24cxx)
ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
sii,s35390a 2-wire CMOS real-time clock
+skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Changed the DT parsing of regulator using regulator_node and of_match
Changes v7:
Modified licensing text to GPLv2
Splitted Kconfig renaming from DT patch
Changes v6:
Added new line character at the end of line of dev_err()
Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string
Modified to return EINVAL when of_node is NULL
Changes v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Changes v3:
Modified to return ENODATA when of_node is NULL
Modified the messages in error cases
Changes v2:
Added 'compatible' attribute in the driver
Added message for exception or errors.
drivers/regulator/sky81452-regulator.c | 46 +++++++---------------------------
1 file changed, 9 insertions(+), 37 deletions(-)
diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c
index 97aff0c..6478606 100644
--- a/drivers/regulator/sky81452-regulator.c
+++ b/drivers/regulator/sky81452-regulator.c
@@ -5,9 +5,8 @@
* Author : Gyungoh Yoo <[email protected]>
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -52,6 +51,8 @@ static const struct regulator_linear_range sky81452_reg_ranges[] = {
static const struct regulator_desc sky81452_reg = {
.name = "LOUT",
+ .of_match = of_match_ptr("lout"),
+ .regulators_node = of_match_ptr("regulator"),
.ops = &sky81452_reg_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
@@ -64,30 +65,6 @@ static const struct regulator_desc sky81452_reg = {
.enable_mask = SKY81452_LEN,
};
-#ifdef CONFIG_OF
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- struct regulator_init_data *init_data;
- struct device_node *np;
-
- np = of_get_child_by_name(dev->parent->of_node, "regulator");
- if (unlikely(!np)) {
- dev_err(dev, "regulator node not found");
- return NULL;
- }
-
- init_data = of_get_regulator_init_data(dev, np);
-
- of_node_put(np);
- return init_data;
-}
-#else
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int sky81452_reg_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -95,20 +72,16 @@ static int sky81452_reg_probe(struct platform_device *pdev)
struct regulator_config config = { };
struct regulator_dev *rdev;
- if (!init_data) {
- init_data = sky81452_reg_parse_dt(dev);
- if (IS_ERR(init_data))
- return PTR_ERR(init_data);
- }
-
- config.dev = dev;
+ config.dev = dev->parent;
config.init_data = init_data;
config.of_node = dev->of_node;
config.regmap = dev_get_drvdata(dev->parent);
rdev = devm_regulator_register(dev, &sky81452_reg, &config);
- if (IS_ERR(rdev))
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(rdev));
return PTR_ERR(rdev);
+ }
platform_set_drvdata(pdev, rdev);
@@ -126,5 +99,4 @@ module_platform_driver(sky81452_reg_driver);
MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver");
MODULE_AUTHOR("Gyungoh Yoo <[email protected]>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
--
1.9.1
From: Gyungoh Yoo <[email protected]>
Signed-off-by: Gyungoh Yoo <[email protected]>
---
Changes v8:
Nothing
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added 'compatible' attribute in the driver
.../devicetree/bindings/regulator/sky81452-regulator.txt | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
index 882455e..f9acbc1 100644
--- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -1,6 +1,7 @@
SKY81452 voltage regulator
Required properties:
+- regulator node named lout.
- any required generic properties defined in regulator.txt
Optional properties:
@@ -9,8 +10,9 @@ Optional properties:
Example:
regulator {
- /* generic regulator properties */
- regulator-name = "touch_en";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <8000000>;
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
};
--
1.9.1
On Tue, Nov 25, 2014 at 04:03:05PM +0900, [email protected] wrote:
> From: Gyungoh Yoo <[email protected]>
This doesn't apply, please check and resend.
On Tue, Nov 25, 2014 at 12:19:16PM +0000, Mark Brown wrote:
> On Tue, Nov 25, 2014 at 04:03:05PM +0900, [email protected] wrote:
> > From: Gyungoh Yoo <[email protected]>
>
> This doesn't apply, please check and resend.
Could you please explain why this doesn't?
On Wed, Nov 26, 2014 at 10:40:07AM +0900, Gyungoh Yoo wrote:
> On Tue, Nov 25, 2014 at 12:19:16PM +0000, Mark Brown wrote:
> > On Tue, Nov 25, 2014 at 04:03:05PM +0900, [email protected] wrote:
> > > From: Gyungoh Yoo <[email protected]>
> > This doesn't apply, please check and resend.
> Could you please explain why this doesn't?
When I tried to apply it to my topic/sky81452 branch git am barfed on
it, presumably because the code you based it on is different to that
branch.
On Wed, Nov 26, 2014 at 04:37:02PM +0000, Mark Brown wrote:
> On Wed, Nov 26, 2014 at 10:40:07AM +0900, Gyungoh Yoo wrote:
> > On Tue, Nov 25, 2014 at 12:19:16PM +0000, Mark Brown wrote:
> > > On Tue, Nov 25, 2014 at 04:03:05PM +0900, [email protected] wrote:
> > > > From: Gyungoh Yoo <[email protected]>
>
> > > This doesn't apply, please check and resend.
>
> > Could you please explain why this doesn't?
>
> When I tried to apply it to my topic/sky81452 branch git am barfed on
> it, presumably because the code you based it on is different to that
> branch.
I checked it and I will resend it.
Thank you.