The previous patch switched some dev functions to move the string to a second
line. Doing this for all similar functions because it makes the driver easier
to read if all similar lines use the same criteria.
Signed-off-by: Luis de Bethencourt <[email protected]>
---
drivers/staging/media/lirc/lirc_zilog.c | 57 ++++++++++++++++++---------------
1 file changed, 32 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c
index 8814a7e..27464da 100644
--- a/drivers/staging/media/lirc/lirc_zilog.c
+++ b/drivers/staging/media/lirc/lirc_zilog.c
@@ -369,7 +369,7 @@ static int add_to_buf(struct IR *ir)
ret = i2c_master_send(rx->c, sendbuf, 1);
if (ret != 1) {
dev_err(ir->l.dev, "i2c_master_send failed with %d\n",
- ret);
+ ret);
if (failures >= 3) {
mutex_unlock(&ir->ir_lock);
dev_err(ir->l.dev,
@@ -412,8 +412,9 @@ static int add_to_buf(struct IR *ir)
rx->b[0] = keybuf[3];
rx->b[1] = keybuf[4];
rx->b[2] = keybuf[5];
- dev_dbg(ir->l.dev, "key (0x%02x/0x%02x)\n",
- rx->b[0], rx->b[1]);
+ dev_dbg(ir->l.dev,
+ "key (0x%02x/0x%02x)\n",
+ rx->b[0], rx->b[1]);
}
/* key pressed ? */
@@ -657,8 +658,8 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
dev_dbg(tx->ir->l.dev, "%*ph", 5, buf);
ret = i2c_master_send(tx->c, buf, tosend + 1);
if (ret != tosend + 1) {
- dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n",
- ret);
+ dev_err(tx->ir->l.dev,
+ "i2c_master_send failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
}
i += tosend;
@@ -711,7 +712,7 @@ static int send_boot_data(struct IR_tx *tx)
}
if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
dev_err(tx->ir->l.dev, "unexpected IR TX init response: %02x\n",
- buf[0]);
+ buf[0]);
return 0;
}
dev_notice(tx->ir->l.dev,
@@ -763,8 +764,9 @@ static int fw_load(struct IR_tx *tx)
/* Request codeset data file */
ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx->ir->l.dev);
if (ret != 0) {
- dev_err(tx->ir->l.dev, "firmware haup-ir-blaster.bin not available (%d)\n",
- ret);
+ dev_err(tx->ir->l.dev,
+ "firmware haup-ir-blaster.bin not available (%d)\n",
+ ret);
ret = ret < 0 ? ret : -EFAULT;
goto out;
}
@@ -814,7 +816,7 @@ static int fw_load(struct IR_tx *tx)
goto corrupt;
dev_dbg(tx->ir->l.dev, "%u IR blaster codesets loaded\n",
- tx_data->num_code_sets);
+ tx_data->num_code_sets);
tx_data->code_sets = vmalloc(
tx_data->num_code_sets * sizeof(char *));
@@ -944,8 +946,9 @@ static ssize_t read(struct file *filep, char __user *outbuf, size_t n,
unsigned char buf[MAX_XFER_SIZE];
if (rbuf->chunk_size > sizeof(buf)) {
- dev_err(ir->l.dev, "chunk_size is too big (%d)!\n",
- rbuf->chunk_size);
+ dev_err(ir->l.dev,
+ "chunk_size is too big (%d)!\n",
+ rbuf->chunk_size);
ret = -EINVAL;
break;
}
@@ -968,8 +971,8 @@ static ssize_t read(struct file *filep, char __user *outbuf, size_t n,
put_ir_rx(rx, false);
set_current_state(TASK_RUNNING);
- dev_dbg(ir->l.dev, "read result = %d (%s)\n",
- ret, ret ? "Error" : "OK");
+ dev_dbg(ir->l.dev, "read result = %d (%s)\n", ret,
+ ret ? "Error" : "OK");
return ret ? ret : written;
}
@@ -1081,7 +1084,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
}
if (buf[0] != 0x80) {
dev_err(tx->ir->l.dev, "unexpected IR TX response #2: %02x\n",
- buf[0]);
+ buf[0]);
return -EFAULT;
}
@@ -1233,7 +1236,7 @@ static unsigned int poll(struct file *filep, poll_table *wait)
ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN|POLLRDNORM);
dev_dbg(ir->l.dev, "poll result = %s\n",
- ret ? "POLLIN|POLLRDNORM" : "none");
+ ret ? "POLLIN|POLLRDNORM" : "none");
return ret;
}
@@ -1340,7 +1343,8 @@ static int close(struct inode *node, struct file *filep)
struct IR *ir = filep->private_data;
if (ir == NULL) {
- dev_err(ir->l.dev, "close: no private_data attached to the file!\n");
+ dev_err(ir->l.dev,
+ "close: no private_data attached to the file!\n");
return -ENODEV;
}
@@ -1611,13 +1615,15 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
ir->l.minor = minor; /* module option: user requested minor number */
ir->l.minor = lirc_register_driver(&ir->l);
if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) {
- dev_err(tx->ir->l.dev, "%s: \"minor\" must be between 0 and %d (%d)!\n",
- __func__, MAX_IRCTL_DEVICES-1, ir->l.minor);
+ dev_err(tx->ir->l.dev,
+ "%s: \"minor\" must be between 0 and %d (%d)!\n",
+ __func__, MAX_IRCTL_DEVICES-1, ir->l.minor);
ret = -EBADRQC;
goto out_put_xx;
}
- dev_info(ir->l.dev, "IR unit on %s (i2c-%d) registered as lirc%d and ready\n",
- adap->name, adap->nr, ir->l.minor);
+ dev_info(ir->l.dev,
+ "IR unit on %s (i2c-%d) registered as lirc%d and ready\n",
+ adap->name, adap->nr, ir->l.minor);
out_ok:
if (rx != NULL)
@@ -1625,8 +1631,9 @@ out_ok:
if (tx != NULL)
put_ir_tx(tx, true);
put_ir_device(ir, true);
- dev_info(ir->l.dev, "probe of IR %s on %s (i2c-%d) done\n",
- tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
+ dev_info(ir->l.dev,
+ "probe of IR %s on %s (i2c-%d) done\n",
+ tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
mutex_unlock(&ir_devices_lock);
return 0;
@@ -1638,9 +1645,9 @@ out_put_xx:
out_put_ir:
put_ir_device(ir, true);
out_no_ir:
- dev_err(&client->dev, "%s: probing IR %s on %s (i2c-%d) failed with %d\n",
- __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr,
- ret);
+ dev_err(&client->dev,
+ "%s: probing IR %s on %s (i2c-%d) failed with %d\n",
+ __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr, ret);
mutex_unlock(&ir_devices_lock);
return ret;
}
--
2.1.3