Patch to the ni_stc.h file that removes spaces before tabs, and adds blank lines
after declarations.
Signed-off-by: Sage Vaillancourt <[email protected]>
---
drivers/staging/comedi/drivers/ni_stc.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index bd69c3f..3b8b3c5 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
#define AI_SCAN_IN_PROG_Pulse _bit4
#define AI_EXTMUX_CLK_Pulse _bit3
#define AI_LOCALMUX_CLK_Pulse _bit2
-#define AI_SC_TC_Pulse _bit1
+#define AI_SC_TC_Pulse _bit1
#define AI_CONVERT_Pulse _bit0
#define AO_Command_1_Register 9
@@ -326,6 +326,7 @@ static inline unsigned RTSI_Output_Bit(unsigned channel, int is_mseries)
{
unsigned max_channel;
unsigned base_bit_shift;
+
if (is_mseries) {
base_bit_shift = 8;
max_channel = 7;
@@ -642,7 +643,7 @@ static unsigned AO_UPDATE_Output_Select(enum ao_update_output_selection
#define G_Load_Source_Select _bit7
#define G_Reload_Source_Switching _bit15
#define G_Loading_On_Gate _bit14
-#define G_Gate_Polarity _bit13
+#define G_Gate_Polarity _bit13
#define G_Counting_Once(a) (((a)&0x03)<<10)
#define G_Stop_Mode(a) (((a)&0x03)<<5)
@@ -1142,6 +1143,7 @@ static inline unsigned MSeries_AI_Config_Bank_Bits(enum ni_reg_type reg_type,
unsigned channel)
{
unsigned bits = channel & 0x30;
+
if (reg_type == ni_reg_622x) {
if (channel & 0x40)
bits |= 0x400;
@@ -1191,6 +1193,7 @@ enum MSeries_PLL_Control_Bits {
static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
{
static const unsigned max_divisor = 0x10;
+
if (divisor < 1 || divisor > max_divisor) {
pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
return 0;
@@ -1201,6 +1204,7 @@ static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
{
static const unsigned max_multiplier = 0x100;
+
if (multiplier < 1 || multiplier > max_multiplier) {
pr_err("%s: bug, invalid multiplier=%i\n", __func__,
multiplier);
--
2.2.0
Sage,
On Sat, Dec 20, 2014 at 09:01:54PM -0500, Sage Vaillancourt wrote:
> Patch to the ni_stc.h file that removes spaces before tabs, and adds blank lines
> after declarations.
> Signed-off-by: Sage Vaillancourt <[email protected]>
Format your log message so it is no more than 80 characters wide (I like
72) and remove the gratuitous spacing on the second line.
Put a blank line between your log message and your Signed-off-by:
This patch is doing two things: adding blank lines and fixing
spaces/tabs in a line. Break it up in to two patches.
> ---
> drivers/staging/comedi/drivers/ni_stc.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
> index bd69c3f..3b8b3c5 100644
> --- a/drivers/staging/comedi/drivers/ni_stc.h
> +++ b/drivers/staging/comedi/drivers/ni_stc.h
> @@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
> #define AI_SCAN_IN_PROG_Pulse _bit4
> #define AI_EXTMUX_CLK_Pulse _bit3
> #define AI_LOCALMUX_CLK_Pulse _bit2
> -#define AI_SC_TC_Pulse _bit1
> +#define AI_SC_TC_Pulse _bit1
> #define AI_CONVERT_Pulse _bit0
>
> #define AO_Command_1_Register 9
> @@ -326,6 +326,7 @@ static inline unsigned RTSI_Output_Bit(unsigned channel, int is_mseries)
> {
> unsigned max_channel;
> unsigned base_bit_shift;
> +
> if (is_mseries) {
> base_bit_shift = 8;
> max_channel = 7;
> @@ -642,7 +643,7 @@ static unsigned AO_UPDATE_Output_Select(enum ao_update_output_selection
> #define G_Load_Source_Select _bit7
> #define G_Reload_Source_Switching _bit15
> #define G_Loading_On_Gate _bit14
> -#define G_Gate_Polarity _bit13
> +#define G_Gate_Polarity _bit13
>
> #define G_Counting_Once(a) (((a)&0x03)<<10)
> #define G_Stop_Mode(a) (((a)&0x03)<<5)
> @@ -1142,6 +1143,7 @@ static inline unsigned MSeries_AI_Config_Bank_Bits(enum ni_reg_type reg_type,
> unsigned channel)
> {
> unsigned bits = channel & 0x30;
> +
> if (reg_type == ni_reg_622x) {
> if (channel & 0x40)
> bits |= 0x400;
> @@ -1191,6 +1193,7 @@ enum MSeries_PLL_Control_Bits {
> static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
> {
> static const unsigned max_divisor = 0x10;
> +
> if (divisor < 1 || divisor > max_divisor) {
> pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
> return 0;
> @@ -1201,6 +1204,7 @@ static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
> static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
> {
> static const unsigned max_multiplier = 0x100;
> +
> if (multiplier < 1 || multiplier > max_multiplier) {
> pr_err("%s: bug, invalid multiplier=%i\n", __func__,
> multiplier);
> --
> 2.2.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
- Jeremiah Mahler
Sage,
On Sun, Dec 21, 2014 at 02:49:29AM -0500, Sage Vaillancourt wrote:
> Jeremiah,
>
> I will get this patching business eventually. When you say "gratuitous
> spacing" do you refer to this line?
>
> > #define G_Gate_Polarity _bit13
>
> Because it looks fine in the code, but there's a tab that's only one
> character wide, so when git adds its one character of formatting, the tab
> expands to its full 8 characters. Before my modification, a space was there
> instead, but I was under the impression that that was less-than-ideal
> practice. Would switching back to the space be preferable? And as far as
> width, should I add a \(enter) where necessary?
>
The spacing in the code was fine. I was referring to your log message
(below).
> And the blank line and two patch bit: understood, simple fix.
>
> - Sage Vaillancourt
>
> On Sun, Dec 21, 2014 at 2:12 AM, Jeremiah Mahler <[email protected]> wrote:
>
> > Sage,
> >
> > On Sat, Dec 20, 2014 at 09:01:54PM -0500, Sage Vaillancourt wrote:
> > > Patch to the ni_stc.h file that removes spaces before tabs, and adds
> > blank lines
> > > after declarations.
^^^^^^^
This was the "gratuitous spacing" I was talking about.
> > > Signed-off-by: Sage Vaillancourt <[email protected]>
> >
> > Format your log message so it is no more than 80 characters wide (I like
> > 72) and remove the gratuitous spacing on the second line.
> >
> > Put a blank line between your log message and your Signed-off-by:
> >
> > This patch is doing two things: adding blank lines and fixing
> > spaces/tabs in a line. Break it up in to two patches.
> >
> > > ---
> > > drivers/staging/comedi/drivers/ni_stc.h | 8 ++++++--
> > > 1 file changed, 6 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/staging/comedi/drivers/ni_stc.h
> > b/drivers/staging/comedi/drivers/ni_stc.h
> > > index bd69c3f..3b8b3c5 100644
> > > --- a/drivers/staging/comedi/drivers/ni_stc.h
> > > +++ b/drivers/staging/comedi/drivers/ni_stc.h
> > > @@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
> > > #define AI_SCAN_IN_PROG_Pulse _bit4
> > > #define AI_EXTMUX_CLK_Pulse _bit3
> > > #define AI_LOCALMUX_CLK_Pulse _bit2
> > > -#define AI_SC_TC_Pulse _bit1
> > > +#define AI_SC_TC_Pulse _bit1
> > > #define AI_CONVERT_Pulse _bit0
> > >
> > > #define AO_Command_1_Register 9
> > > @@ -326,6 +326,7 @@ static inline unsigned RTSI_Output_Bit(unsigned
> > channel, int is_mseries)
> > > {
> > > unsigned max_channel;
> > > unsigned base_bit_shift;
> > > +
> > > if (is_mseries) {
> > > base_bit_shift = 8;
> > > max_channel = 7;
> > > @@ -642,7 +643,7 @@ static unsigned AO_UPDATE_Output_Select(enum
> > ao_update_output_selection
> > > #define G_Load_Source_Select _bit7
> > > #define G_Reload_Source_Switching _bit15
> > > #define G_Loading_On_Gate _bit14
> > > -#define G_Gate_Polarity _bit13
> > > +#define G_Gate_Polarity _bit13
> > >
> > > #define G_Counting_Once(a) (((a)&0x03)<<10)
> > > #define G_Stop_Mode(a) (((a)&0x03)<<5)
> > > @@ -1142,6 +1143,7 @@ static inline unsigned
> > MSeries_AI_Config_Bank_Bits(enum ni_reg_type reg_type,
> > > unsigned channel)
> > > {
> > > unsigned bits = channel & 0x30;
> > > +
> > > if (reg_type == ni_reg_622x) {
> > > if (channel & 0x40)
> > > bits |= 0x400;
> > > @@ -1191,6 +1193,7 @@ enum MSeries_PLL_Control_Bits {
> > > static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
> > > {
> > > static const unsigned max_divisor = 0x10;
> > > +
> > > if (divisor < 1 || divisor > max_divisor) {
> > > pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
> > > return 0;
> > > @@ -1201,6 +1204,7 @@ static inline unsigned
> > MSeries_PLL_Divisor_Bits(unsigned divisor)
> > > static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
> > > {
> > > static const unsigned max_multiplier = 0x100;
> > > +
> > > if (multiplier < 1 || multiplier > max_multiplier) {
> > > pr_err("%s: bug, invalid multiplier=%i\n", __func__,
> > > multiplier);
> > > --
> > > 2.2.0
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > in
> > > the body of a message to [email protected]
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
> >
> > --
> > - Jeremiah Mahler
> >
--
- Jeremiah Mahler