Quoting Tony Lindgren (2015-01-30 17:04:44)
> Hi all,
>
> Looks like commit cb75a8fcd14e ("clk: Add rate constraints to clocks")
> causes a regression on at least omaps where the serial console either
> does not show anything, or just prints garbage.
>
> Reverting cb75a8fcd14e makes things work again on next-20150130.
>
> Any ideas?
Stephen posted a patch[0] to fix this. I've squashed that into Tomeu's
commit that you reference above and my Panda board is booting fine once
again.
[0] http://lkml.kernel.org/r/<[email protected]>
Please let me know if any other issues pop up. There are new WARNs for
OMAP3+ boards introduced by a different patch from Tomeu, but this is
really because the OMAP DPLL and FAPLL code are dereferencing struct clk
pointers when they should not be and is a separate issue from the
constraints patch (with a separate email thread).
Regards,
Mike
>
> Regards,
>
> Tony
* Mike Turquette <[email protected]> [150201 15:29]:
> Quoting Tony Lindgren (2015-01-30 17:04:44)
> > Hi all,
> >
> > Looks like commit cb75a8fcd14e ("clk: Add rate constraints to clocks")
> > causes a regression on at least omaps where the serial console either
> > does not show anything, or just prints garbage.
> >
> > Reverting cb75a8fcd14e makes things work again on next-20150130.
> >
> > Any ideas?
>
> Stephen posted a patch[0] to fix this. I've squashed that into Tomeu's
> commit that you reference above and my Panda board is booting fine once
> again.
>
> [0] http://lkml.kernel.org/r/<[email protected]>
>
> Please let me know if any other issues pop up. There are new WARNs for
> OMAP3+ boards introduced by a different patch from Tomeu, but this is
> really because the OMAP DPLL and FAPLL code are dereferencing struct clk
> pointers when they should not be and is a separate issue from the
> constraints patch (with a separate email thread).
Seems Linux next is broken again. Now we omaps get tons of:
clock: dpll_abe_ck failed transition to 'locked'
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:925 clk_disable+0x28/0x34()
and
WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/dpll3xxx.c:436
omap3_noncore_dpll_enable+0xdc/0x10c()
Regards,
Tony