* Mark Einon <[email protected]> wrote:
> Two static functions are only used if CONFIG_PCI is defined,so only build them
> if this is the case. Fixes the build warnings:
>
> arch/x86/kernel/early_printk.c:98:13: warning: ‘mem32_serial_out’ defined but not used [-Wunused-function]
> static void mem32_serial_out(unsigned long addr, int offset, int value)
> ^
> arch/x86/kernel/early_printk.c:105:21: warning: ‘mem32_serial_in’ defined but not used [-Wunused-function]
> static unsigned int mem32_serial_in(unsigned long addr, int offset)
> ^
>
> Signed-off-by: Mark Einon <[email protected]>
> ---
> v2 - Move code to another #ifdef instead of creating a new ifdef pair after
> comment by Borislav Petkov <[email protected]>.
>
>
> arch/x86/kernel/early_printk.c | 34 ++++++++++++++++++++--------------
> 1 file changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
> index f85e3fb..cb2bab2 100644
> --- a/arch/x86/kernel/early_printk.c
> +++ b/arch/x86/kernel/early_printk.c
> @@ -95,20 +95,6 @@ static unsigned long early_serial_base = 0x3f8; /* ttyS0 */
> #define DLL 0 /* Divisor Latch Low */
> #define DLH 1 /* Divisor latch High */
>
> -static void mem32_serial_out(unsigned long addr, int offset, int value)
> -{
> - uint32_t *vaddr = (uint32_t *)addr;
> - /* shift implied by pointer type */
> - writel(value, vaddr + offset);
> -}
> -
> -static unsigned int mem32_serial_in(unsigned long addr, int offset)
> -{
> - uint32_t *vaddr = (uint32_t *)addr;
> - /* shift implied by pointer type */
> - return readl(vaddr + offset);
> -}
> -
> static unsigned int io_serial_in(unsigned long addr, int offset)
> {
> return inb(addr + offset);
> @@ -205,6 +191,20 @@ static __init void early_serial_init(char *s)
> }
>
> #ifdef CONFIG_PCI
> +static void mem32_serial_out(unsigned long addr, int offset, int value)
> +{
> + uint32_t *vaddr = (uint32_t *)addr;
> + /* shift implied by pointer type */
> + writel(value, vaddr + offset);
> +}
> +
> +static unsigned int mem32_serial_in(unsigned long addr, int offset)
> +{
> + uint32_t *vaddr = (uint32_t *)addr;
> + /* shift implied by pointer type */
> + return readl(vaddr + offset);
> +}
btw., while at it, this should use 'u32'.
> +
> /*
> * early_pci_serial_init()
> *
> @@ -375,6 +375,12 @@ static int __init setup_early_printk(char *buf)
> if (!strncmp(buf, "xen", 3))
> early_console_register(&xenboot_console, keep);
> #endif
> +#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
> + if (!strncmp(buf, "hsu", 3)) {
> + hsu_early_console_init(buf + 3);
> + early_console_register(&early_hsu_console, keep);
> + }
> +#endif
> #ifdef CONFIG_EARLY_PRINTK_EFI
> if (!strncmp(buf, "efi", 3))
> early_console_register(&early_efi_console, keep);
huh?
Thanks,
Ingo
On Wed, Apr 01, 2015 at 09:54:10AM +0200, Ingo Molnar wrote:
>
> * Mark Einon <[email protected]> wrote:
>
> > Two static functions are only used if CONFIG_PCI is defined,so only build them
> > if this is the case. Fixes the build warnings:
> >
> > arch/x86/kernel/early_printk.c:98:13: warning: ‘mem32_serial_out’ defined but not used [-Wunused-function]
> > static void mem32_serial_out(unsigned long addr, int offset, int value)
> > ^
> > arch/x86/kernel/early_printk.c:105:21: warning: ‘mem32_serial_in’ defined but not used [-Wunused-function]
> > static unsigned int mem32_serial_in(unsigned long addr, int offset)
> > ^
> >
> > Signed-off-by: Mark Einon <[email protected]>
> > ---
> > v2 - Move code to another #ifdef instead of creating a new ifdef pair after
> > comment by Borislav Petkov <[email protected]>.
> >
> >
> > arch/x86/kernel/early_printk.c | 34 ++++++++++++++++++++--------------
> > 1 file changed, 20 insertions(+), 14 deletions(-)
> >
> > diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
> > index f85e3fb..cb2bab2 100644
> > --- a/arch/x86/kernel/early_printk.c
> > +++ b/arch/x86/kernel/early_printk.c
> > @@ -95,20 +95,6 @@ static unsigned long early_serial_base = 0x3f8; /* ttyS0 */
> > #define DLL 0 /* Divisor Latch Low */
> > #define DLH 1 /* Divisor latch High */
> >
> > -static void mem32_serial_out(unsigned long addr, int offset, int value)
> > -{
> > - uint32_t *vaddr = (uint32_t *)addr;
> > - /* shift implied by pointer type */
> > - writel(value, vaddr + offset);
> > -}
> > -
> > -static unsigned int mem32_serial_in(unsigned long addr, int offset)
> > -{
> > - uint32_t *vaddr = (uint32_t *)addr;
> > - /* shift implied by pointer type */
> > - return readl(vaddr + offset);
> > -}
> > -
> > static unsigned int io_serial_in(unsigned long addr, int offset)
> > {
> > return inb(addr + offset);
> > @@ -205,6 +191,20 @@ static __init void early_serial_init(char *s)
> > }
> >
> > #ifdef CONFIG_PCI
> > +static void mem32_serial_out(unsigned long addr, int offset, int value)
> > +{
> > + uint32_t *vaddr = (uint32_t *)addr;
> > + /* shift implied by pointer type */
> > + writel(value, vaddr + offset);
> > +}
> > +
> > +static unsigned int mem32_serial_in(unsigned long addr, int offset)
> > +{
> > + uint32_t *vaddr = (uint32_t *)addr;
> > + /* shift implied by pointer type */
> > + return readl(vaddr + offset);
> > +}
>
> btw., while at it, this should use 'u32'.
Sure, I can change this.
> > +
> > /*
> > * early_pci_serial_init()
> > *
> > @@ -375,6 +375,12 @@ static int __init setup_early_printk(char *buf)
> > if (!strncmp(buf, "xen", 3))
> > early_console_register(&xenboot_console, keep);
> > #endif
> > +#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
> > + if (!strncmp(buf, "hsu", 3)) {
> > + hsu_early_console_init(buf + 3);
> > + early_console_register(&early_hsu_console, keep);
> > + }
> > +#endif
> > #ifdef CONFIG_EARLY_PRINTK_EFI
> > if (!strncmp(buf, "efi", 3))
> > early_console_register(&early_efi_console, keep);
>
> huh?
Ah, my bad - looks like I patched the wrong branch before resending. I'll do a
v3 with the other change above.
Mark