Hi Anand,
> Add pwm-fan node to the OdroidXU3 board.
>
> Tested on OdroidXU3 board.
>
> Signed-off-by: Anand Moon <[email protected]>
> ---
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index a519c86..eaec006
> 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> @@ -278,6 +278,15 @@
> rtc@101E0000 {
> status = "okay";
> };
> +
> + fan0: pwm-fan {
> + compatible = "pwm-fan";
> + pwms = <&pwm 0 20972 0>;
> + cooling-min-state = <0>;
> + cooling-max-state = <3>;
> + #cooling-cells = <2>;
> + cooling-levels = <0 90 130 170 230>;
> + };
> };
>
> &hdmi {
> @@ -369,3 +378,10 @@
> shunt-resistor = <10000>;
> };
> };
> +
> +&pwm {
> + pinctrl-0 = <&pwm0_out>;
> + pinctrl-names = "default";
> + samsung,pwm-outputs = <0>;
> + status = "okay";
> +};
Acked-by: Lukasz Majewski <[email protected]>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group