Em Mon, 12 Jan 2015 00:05:10 +0100
Rickard Strandqvist <[email protected]> escreveu:
> Remove the function as10x_cmd_eLNA_change_mode() that is not used anywhere.
>
> This was partially found by using a static code analysis program called cppcheck.
The fix here should add support for it, as the DVB core now supports
changing the LNA settings via DTV_LNA property, as described at:
http://linuxtv.org/downloads/v4l-dvb-apis/FE_GET_SET_PROPERTY.html#DTV-LNA
Regards,
Mauro
>
> Signed-off-by: Rickard Strandqvist <[email protected]>
> ---
> drivers/media/usb/as102/as10x_cmd.h | 1 -
> drivers/media/usb/as102/as10x_cmd_cfg.c | 49 -------------------------------
> 2 files changed, 50 deletions(-)
>
> diff --git a/drivers/media/usb/as102/as10x_cmd.h b/drivers/media/usb/as102/as10x_cmd.h
> index e06b84e..d87fc2f 100644
> --- a/drivers/media/usb/as102/as10x_cmd.h
> +++ b/drivers/media/usb/as102/as10x_cmd.h
> @@ -518,6 +518,5 @@ int as10x_cmd_get_context(struct as10x_bus_adapter_t *adap,
> uint16_t tag,
> uint32_t *pvalue);
>
> -int as10x_cmd_eLNA_change_mode(struct as10x_bus_adapter_t *adap, uint8_t mode);
> int as10x_context_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id);
> #endif
> diff --git a/drivers/media/usb/as102/as10x_cmd_cfg.c b/drivers/media/usb/as102/as10x_cmd_cfg.c
> index c87f2ca..74def1f 100644
> --- a/drivers/media/usb/as102/as10x_cmd_cfg.c
> +++ b/drivers/media/usb/as102/as10x_cmd_cfg.c
> @@ -130,55 +130,6 @@ out:
> }
>
> /**
> - * as10x_cmd_eLNA_change_mode - send eLNA change mode command to AS10x
> - * @adap: pointer to AS10x bus adapter
> - * @mode: mode selected:
> - * - ON : 0x0 => eLNA always ON
> - * - OFF : 0x1 => eLNA always OFF
> - * - AUTO : 0x2 => eLNA follow hysteresis parameters
> - * to be ON or OFF
> - *
> - * Return 0 on success or negative value in case of error.
> - */
> -int as10x_cmd_eLNA_change_mode(struct as10x_bus_adapter_t *adap, uint8_t mode)
> -{
> - int error;
> - struct as10x_cmd_t *pcmd, *prsp;
> -
> - pcmd = adap->cmd;
> - prsp = adap->rsp;
> -
> - /* prepare command */
> - as10x_cmd_build(pcmd, (++adap->cmd_xid),
> - sizeof(pcmd->body.cfg_change_mode.req));
> -
> - /* fill command */
> - pcmd->body.cfg_change_mode.req.proc_id =
> - cpu_to_le16(CONTROL_PROC_ELNA_CHANGE_MODE);
> - pcmd->body.cfg_change_mode.req.mode = mode;
> -
> - /* send command */
> - if (adap->ops->xfer_cmd) {
> - error = adap->ops->xfer_cmd(adap, (uint8_t *) pcmd,
> - sizeof(pcmd->body.cfg_change_mode.req)
> - + HEADER_SIZE, (uint8_t *) prsp,
> - sizeof(prsp->body.cfg_change_mode.rsp)
> - + HEADER_SIZE);
> - } else {
> - error = AS10X_CMD_ERROR;
> - }
> -
> - if (error < 0)
> - goto out;
> -
> - /* parse response */
> - error = as10x_rsp_parse(prsp, CONTROL_PROC_ELNA_CHANGE_MODE_RSP);
> -
> -out:
> - return error;
> -}
> -
> -/**
> * as10x_context_rsp_parse - Parse context command response
> * @prsp: pointer to AS10x command response buffer
> * @proc_id: id of the command