These patches include two changes:
1. Code cleanup around a switch-case statement
2. Bug fix for the possible PCI cache line sizes
Okash Khawaja (2):
adm8211: fix checkpatch errors for indentation and new line.
adm8211: fixed the possible pci cache line sizes inside switch-case
drivers/net/wireless/adm8211.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--
2.4.0
This patch fixes these checkpatch.pl errors around a single switch-case
block:
ERROR: switch and case should be at the same indent
ERROR: trailing statements should be on next line
More specifically, the fix has been applied to the five occurances of
the errors listed below.
ERROR: switch and case should be at the same indent
#1100: FILE: adm8211.c:1100:
+ switch (cline) {
[...]
+ default: reg |= (0x0 << 14);
ERROR: trailing statements should be on next line
#1101: FILE: adm8211.c:1101:
+ case 0x8: reg |= (0x1 << 14);
ERROR: trailing statements should be on next line
#1103: FILE: adm8211.c:1103:
+ case 0x16: reg |= (0x2 << 14);
ERROR: trailing statements should be on next line
#1105: FILE: adm8211.c:1105:
+ case 0x32: reg |= (0x3 << 14);
ERROR: trailing statements should be on next line
#1107: FILE: adm8211.c:1107:
+ default: reg |= (0x0 << 14);
Signed-off-by: Okash Khawaja <[email protected]>
---
drivers/net/wireless/adm8211.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index f07a618..058fb4b 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1098,14 +1098,18 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
switch (cline) {
- case 0x8: reg |= (0x1 << 14);
- break;
- case 0x16: reg |= (0x2 << 14);
- break;
- case 0x32: reg |= (0x3 << 14);
- break;
- default: reg |= (0x0 << 14);
- break;
+ case 0x8:
+ reg |= (0x1 << 14);
+ break;
+ case 0x16:
+ reg |= (0x2 << 14);
+ break;
+ case 0x32:
+ reg |= (0x3 << 14);
+ break;
+ default:
+ reg |= (0x0 << 14);
+ break;
}
}
--
2.4.0
The PCI cache line size value was being compared against decimal values
prefixed with 0x.
Fixed the literals to use the correct hex values.
This has not been tested due to lack of hardware. However, the value in
`cline` is PCI cache line size, which is the CPU's cache line size.
It is less likely for cache line sizes to be 22 or 50, and more likely for
them to be 16 or 32. Also, as far as I understand, cache line size is used for
things like aligning DMA requests with CPU cache line, which improve
performance but wouldn't break anything if the value doesn't match. In
this case, we will fall through to the default case which leaves `reg`
unchanged.
Signed-off-by: Okash Khawaja <[email protected]>
---
drivers/net/wireless/adm8211.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 058fb4b..76c908f 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1101,10 +1101,10 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
case 0x8:
reg |= (0x1 << 14);
break;
- case 0x16:
+ case 0x10:
reg |= (0x2 << 14);
break;
- case 0x32:
+ case 0x20:
reg |= (0x3 << 14);
break;
default:
--
2.4.0
> This patch fixes these checkpatch.pl errors around a single switch-case
> block:
>
> ERROR: switch and case should be at the same indent
> ERROR: trailing statements should be on next line
>
> More specifically, the fix has been applied to the five occurances of
> the errors listed below.
>
> ERROR: switch and case should be at the same indent
> #1100: FILE: adm8211.c:1100:
> + switch (cline) {
> [...]
> + default: reg |= (0x0 << 14);
>
> ERROR: trailing statements should be on next line
> #1101: FILE: adm8211.c:1101:
> + case 0x8: reg |= (0x1 << 14);
>
> ERROR: trailing statements should be on next line
> #1103: FILE: adm8211.c:1103:
> + case 0x16: reg |= (0x2 << 14);
>
> ERROR: trailing statements should be on next line
> #1105: FILE: adm8211.c:1105:
> + case 0x32: reg |= (0x3 << 14);
>
> ERROR: trailing statements should be on next line
> #1107: FILE: adm8211.c:1107:
> + default: reg |= (0x0 << 14);
>
>
> Signed-off-by: Okash Khawaja <[email protected]>
Thanks, 2 patches applied to wireless-drivers-next.git:
f5c65f38912e adm8211: fix checkpatch errors for indentation and new line
fe0a483ecf44 adm8211: fixed the possible pci cache line sizes inside switch-case
Kalle Valo