size_t should print using %zu, but here it was using %d and hence we
were getting warning while printing.
Signed-off-by: Sudip Mukherjee <[email protected]>
---
I think it will be easy to remove the other warnings if all the typedefs
are removed first.
drivers/staging/wilc1000/wilc_spi.c | 2 +-
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index d0e7610..6d854fd 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
#undef NUM_DUMMY_BYTES
if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
- PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
+ PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",
len2, (sizeof(wb) / sizeof(wb[0])));
result = N_FAIL;
return result;
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index e9ab2cb..6fdb0d6 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -638,7 +638,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
}
- PRINT_D(CFG80211_DBG, "Association request info elements length = %d\n", pstrConnectInfo->ReqIEsLen);
+ PRINT_D(CFG80211_DBG, "Association request info elements length = %zu\n", pstrConnectInfo->ReqIEsLen);
PRINT_D(CFG80211_DBG, "Association response info elements length = %d\n", pstrConnectInfo->u16RespIEsLen);
@@ -778,7 +778,7 @@ static int WILC_WFI_CfgScan(struct wiphy *wiphy, struct cfg80211_scan_request *r
}
PRINT_D(CFG80211_DBG, "Requested num of scan channel %d\n", request->n_channels);
- PRINT_D(CFG80211_DBG, "Scan Request IE len = %d\n", request->ie_len);
+ PRINT_D(CFG80211_DBG, "Scan Request IE len = %zu\n", request->ie_len);
PRINT_D(CFG80211_DBG, "Number of SSIDs %d\n", request->n_ssids);
@@ -3316,7 +3316,7 @@ static int WILC_WFI_start_ap(struct wiphy *wiphy, struct net_device *dev,
priv = wiphy_priv(wiphy);
PRINT_D(HOSTAPD_DBG, "Starting ap\n");
- PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %d Tail length = %d\n",
+ PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %zu Tail length = %zu\n",
settings->beacon_interval, settings->dtim_period, beacon->head_len, beacon->tail_len);
s32Error = WILC_WFI_CfgSetChannel(wiphy, &settings->chandef);
--
1.8.1.2
On 06/02, Sudip Mukherjee wrote:
> size_t should print using %zu, but here it was using %d and hence we
> were getting warning while printing.
>
> Signed-off-by: Sudip Mukherjee <[email protected]>
> ---
>
> I think it will be easy to remove the other warnings if all the typedefs
> are removed first.
>
> drivers/staging/wilc1000/wilc_spi.c | 2 +-
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> index d0e7610..6d854fd 100644
> --- a/drivers/staging/wilc1000/wilc_spi.c
> +++ b/drivers/staging/wilc1000/wilc_spi.c
> @@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
> #undef NUM_DUMMY_BYTES
>
> if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
> - PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
> + PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",
Hi, it seems that the above line should use %zu too. Am I correct or I'm
missing something?
- konrad
> len2, (sizeof(wb) / sizeof(wb[0])));
> result = N_FAIL;
> return result;
> diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> index e9ab2cb..6fdb0d6 100644
> --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> @@ -638,7 +638,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
> }
>
>
> - PRINT_D(CFG80211_DBG, "Association request info elements length = %d\n", pstrConnectInfo->ReqIEsLen);
> + PRINT_D(CFG80211_DBG, "Association request info elements length = %zu\n", pstrConnectInfo->ReqIEsLen);
>
> PRINT_D(CFG80211_DBG, "Association response info elements length = %d\n", pstrConnectInfo->u16RespIEsLen);
>
> @@ -778,7 +778,7 @@ static int WILC_WFI_CfgScan(struct wiphy *wiphy, struct cfg80211_scan_request *r
> }
>
> PRINT_D(CFG80211_DBG, "Requested num of scan channel %d\n", request->n_channels);
> - PRINT_D(CFG80211_DBG, "Scan Request IE len = %d\n", request->ie_len);
> + PRINT_D(CFG80211_DBG, "Scan Request IE len = %zu\n", request->ie_len);
>
> PRINT_D(CFG80211_DBG, "Number of SSIDs %d\n", request->n_ssids);
>
> @@ -3316,7 +3316,7 @@ static int WILC_WFI_start_ap(struct wiphy *wiphy, struct net_device *dev,
> priv = wiphy_priv(wiphy);
> PRINT_D(HOSTAPD_DBG, "Starting ap\n");
>
> - PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %d Tail length = %d\n",
> + PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %zu Tail length = %zu\n",
> settings->beacon_interval, settings->dtim_period, beacon->head_len, beacon->tail_len);
>
> s32Error = WILC_WFI_CfgSetChannel(wiphy, &settings->chandef);
> --
> 1.8.1.2
>
> _______________________________________________
> devel mailing list
> [email protected]
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
On Tue, Jun 02, 2015 at 10:29:17AM +0200, Konrad Zapalowicz wrote:
> On 06/02, Sudip Mukherjee wrote:
> > size_t should print using %zu, but here it was using %d and hence we
> > were getting warning while printing.
> >
> > Signed-off-by: Sudip Mukherjee <[email protected]>
> > ---
> >
> > I think it will be easy to remove the other warnings if all the typedefs
> > are removed first.
> >
> > drivers/staging/wilc1000/wilc_spi.c | 2 +-
> > drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
> > 2 files changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> > index d0e7610..6d854fd 100644
> > --- a/drivers/staging/wilc1000/wilc_spi.c
> > +++ b/drivers/staging/wilc1000/wilc_spi.c
> > @@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
> > #undef NUM_DUMMY_BYTES
> >
> > if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
> > - PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
> > + PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",
>
> Hi, it seems that the above line should use %zu too. Am I correct or I'm
> missing something?
oops. my mistake. %lu is correct but i missed mentioning the warning
about long unsigned int in the commit message.
regards
sudip
On 06/02, Sudip Mukherjee wrote:
> On Tue, Jun 02, 2015 at 10:29:17AM +0200, Konrad Zapalowicz wrote:
> > On 06/02, Sudip Mukherjee wrote:
> > > size_t should print using %zu, but here it was using %d and hence we
> > > were getting warning while printing.
> > >
> > > Signed-off-by: Sudip Mukherjee <[email protected]>
> > > ---
> > >
> > > I think it will be easy to remove the other warnings if all the typedefs
> > > are removed first.
> > >
> > > drivers/staging/wilc1000/wilc_spi.c | 2 +-
> > > drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
> > > 2 files changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> > > index d0e7610..6d854fd 100644
> > > --- a/drivers/staging/wilc1000/wilc_spi.c
> > > +++ b/drivers/staging/wilc1000/wilc_spi.c
> > > @@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
> > > #undef NUM_DUMMY_BYTES
> > >
> > > if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
> > > - PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
> > > + PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",
> >
> > Hi, it seems that the above line should use %zu too. Am I correct or I'm
> > missing something?
> oops. my mistake. %lu is correct but i missed mentioning the warning
> about long unsigned int in the commit message.
Why %lu here and %zu in other places? I mean that it is the same size_t
or I'm missing something?
- konrad
> regards
> sudip
On Tue, Jun 02, 2015 at 10:58:40AM +0200, Konrad Zapalowicz wrote:
> On 06/02, Sudip Mukherjee wrote:
> > On Tue, Jun 02, 2015 at 10:29:17AM +0200, Konrad Zapalowicz wrote:
> > > On 06/02, Sudip Mukherjee wrote:
> > > > size_t should print using %zu, but here it was using %d and hence we
> > > > were getting warning while printing.
> > > >
> > > > Signed-off-by: Sudip Mukherjee <[email protected]>
> > > > ---
> > > >
> > > > I think it will be easy to remove the other warnings if all the typedefs
> > > > are removed first.
> > > >
> > > > drivers/staging/wilc1000/wilc_spi.c | 2 +-
> > > > drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
> > > > 2 files changed, 4 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> > > > index d0e7610..6d854fd 100644
> > > > --- a/drivers/staging/wilc1000/wilc_spi.c
> > > > +++ b/drivers/staging/wilc1000/wilc_spi.c
> > > > @@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
> > > > #undef NUM_DUMMY_BYTES
> > > >
> > > > if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
> > > > - PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
> > > > + PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",
> > >
> > > Hi, it seems that the above line should use %zu too. Am I correct or I'm
> > > missing something?
> > oops. my mistake. %lu is correct but i missed mentioning the warning
> > about long unsigned int in the commit message.
>
> Why %lu here and %zu in other places? I mean that it is the same size_t
> or I'm missing something?
no, this is unsigned long int.
The warning here was:
drivers/staging/wilc1000/wilc_spi.c:407:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
so size_t used %zu and unsigned long int should use %lu
regards
sudip
>
> - konrad
>
> > regards
> > sudip