Add dapm kcontrols to select left/right ADC input source, one to select
the left ADC input source and one for the right ADC input source.
In default, the left ADC will select the left input, and the right ADC will
select the right input. When the left(right) ADC select the right(left) input,
the left(right) input path will be powered down.
Signed-off-by: Zidan Wang <[email protected]>
---
sound/soc/codecs/wm8960.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 023e898..3ea12b7 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -141,6 +141,8 @@ static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
+static const char *wm8960_adcl_src_text[] = {"Left", "Right"};
+static const char *wm8960_adcr_src_text[] = {"Right", "Left"};
static const struct soc_enum wm8960_enum[] = {
SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
@@ -150,6 +152,10 @@ static const struct soc_enum wm8960_enum[] = {
SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
};
+static SOC_ENUM_SINGLE_DECL(wm8960_adcl_src_enum,
+ WM8960_ADDCTL1, 3, wm8960_adcl_src_text);
+static SOC_ENUM_SINGLE_DECL(wm8960_adcr_src_enum,
+ WM8960_ADDCTL1, 2, wm8960_adcr_src_text);
static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
@@ -281,6 +287,11 @@ SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
};
+static const struct snd_kcontrol_new wm8960_adcl_mux =
+ SOC_DAPM_ENUM("ADCL Source", wm8960_adcl_src_enum);
+static const struct snd_kcontrol_new wm8960_adcr_mux =
+ SOC_DAPM_ENUM("ADCR Source", wm8960_adcr_src_enum);
+
static const struct snd_kcontrol_new wm8960_lin_boost[] = {
SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
@@ -344,6 +355,9 @@ SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
+SND_SOC_DAPM_MUX("ADCL Source", SND_SOC_NOPM, 0, 0, &wm8960_adcl_mux),
+SND_SOC_DAPM_MUX("ADCR Source", SND_SOC_NOPM, 0, 0, &wm8960_adcr_mux),
+
SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
&wm8960_loutput_mixer[0],
ARRAY_SIZE(wm8960_loutput_mixer)),
@@ -399,8 +413,14 @@ static const struct snd_soc_dapm_route audio_paths[] = {
{ "Right Input Mixer", NULL, "RINPUT2" },
{ "Right Input Mixer", NULL, "RINPUT3" },
- { "Left ADC", NULL, "Left Input Mixer" },
- { "Right ADC", NULL, "Right Input Mixer" },
+ { "ADCL Source", "Left", "Left Input Mixer" },
+ { "ADCL Source", "Right", "Right Input Mixer" },
+
+ { "ADCR Source", "Left", "Left Input Mixer" },
+ { "ADCR Source", "Right", "Right Input Mixer" },
+
+ { "Left ADC", NULL, "ADCL Source" },
+ { "Right ADC", NULL, "ADCR Source" },
{ "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
{ "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} ,
--
1.9.1
On Tue, Jun 16, 2015 at 02:23:19PM +0800, Zidan Wang wrote:
> Add dapm kcontrols to select left/right ADC input source, one to select
> the left ADC input source and one for the right ADC input source.
>
> In default, the left ADC will select the left input, and the right ADC will
> select the right input. When the left(right) ADC select the right(left) input,
> the left(right) input path will be powered down.
>
> Signed-off-by: Zidan Wang <[email protected]>
> ---
> sound/soc/codecs/wm8960.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> index 023e898..3ea12b7 100644
> --- a/sound/soc/codecs/wm8960.c
> +++ b/sound/soc/codecs/wm8960.c
> @@ -141,6 +141,8 @@ static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
> static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
> static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
> static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
> +static const char *wm8960_adcl_src_text[] = {"Left", "Right"};
> +static const char *wm8960_adcr_src_text[] = {"Right", "Left"};
>
> static const struct soc_enum wm8960_enum[] = {
> SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
> @@ -150,6 +152,10 @@ static const struct soc_enum wm8960_enum[] = {
> SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
> SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
> };
> +static SOC_ENUM_SINGLE_DECL(wm8960_adcl_src_enum,
> + WM8960_ADDCTL1, 3, wm8960_adcl_src_text);
> +static SOC_ENUM_SINGLE_DECL(wm8960_adcr_src_enum,
> + WM8960_ADDCTL1, 2, wm8960_adcr_src_text);
>
> static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
>
> @@ -281,6 +287,11 @@ SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
> WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
> };
>
> +static const struct snd_kcontrol_new wm8960_adcl_mux =
> + SOC_DAPM_ENUM("ADCL Source", wm8960_adcl_src_enum);
> +static const struct snd_kcontrol_new wm8960_adcr_mux =
> + SOC_DAPM_ENUM("ADCR Source", wm8960_adcr_src_enum);
> +
> static const struct snd_kcontrol_new wm8960_lin_boost[] = {
> SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
> SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
> @@ -344,6 +355,9 @@ SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
> SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
> SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
>
> +SND_SOC_DAPM_MUX("ADCL Source", SND_SOC_NOPM, 0, 0, &wm8960_adcl_mux),
> +SND_SOC_DAPM_MUX("ADCR Source", SND_SOC_NOPM, 0, 0, &wm8960_adcr_mux),
> +
> SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
> &wm8960_loutput_mixer[0],
> ARRAY_SIZE(wm8960_loutput_mixer)),
> @@ -399,8 +413,14 @@ static const struct snd_soc_dapm_route audio_paths[] = {
> { "Right Input Mixer", NULL, "RINPUT2" },
> { "Right Input Mixer", NULL, "RINPUT3" },
>
> - { "Left ADC", NULL, "Left Input Mixer" },
> - { "Right ADC", NULL, "Right Input Mixer" },
> + { "ADCL Source", "Left", "Left Input Mixer" },
> + { "ADCL Source", "Right", "Right Input Mixer" },
> +
> + { "ADCR Source", "Left", "Left Input Mixer" },
> + { "ADCR Source", "Right", "Right Input Mixer" },
> +
> + { "Left ADC", NULL, "ADCL Source" },
> + { "Right ADC", NULL, "ADCR Source" },
Are you sure this is correct? My reading is that those bits don't
affect routing at all, they mearly determine how the channel is
sent out on the AIF.
Thanks,
Charles
On Tue, Jun 16, 2015 at 01:18:39PM +0100, Charles Keepax wrote:
> On Tue, Jun 16, 2015 at 02:23:19PM +0800, Zidan Wang wrote:
> > Add dapm kcontrols to select left/right ADC input source, one to select
> > the left ADC input source and one for the right ADC input source.
> >
> > In default, the left ADC will select the left input, and the right ADC will
> > select the right input. When the left(right) ADC select the right(left) input,
> > the left(right) input path will be powered down.
> >
> > Signed-off-by: Zidan Wang <[email protected]>
> > ---
> > sound/soc/codecs/wm8960.c | 24 ++++++++++++++++++++++--
> > 1 file changed, 22 insertions(+), 2 deletions(-)
> >
> > diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> > index 023e898..3ea12b7 100644
> > --- a/sound/soc/codecs/wm8960.c
> > +++ b/sound/soc/codecs/wm8960.c
> > @@ -141,6 +141,8 @@ static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
> > static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
> > static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
> > static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
> > +static const char *wm8960_adcl_src_text[] = {"Left", "Right"};
> > +static const char *wm8960_adcr_src_text[] = {"Right", "Left"};
> >
> > static const struct soc_enum wm8960_enum[] = {
> > SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
> > @@ -150,6 +152,10 @@ static const struct soc_enum wm8960_enum[] = {
> > SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
> > SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
> > };
> > +static SOC_ENUM_SINGLE_DECL(wm8960_adcl_src_enum,
> > + WM8960_ADDCTL1, 3, wm8960_adcl_src_text);
> > +static SOC_ENUM_SINGLE_DECL(wm8960_adcr_src_enum,
> > + WM8960_ADDCTL1, 2, wm8960_adcr_src_text);
> >
> > static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
> >
> > @@ -281,6 +287,11 @@ SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
> > WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
> > };
> >
> > +static const struct snd_kcontrol_new wm8960_adcl_mux =
> > + SOC_DAPM_ENUM("ADCL Source", wm8960_adcl_src_enum);
> > +static const struct snd_kcontrol_new wm8960_adcr_mux =
> > + SOC_DAPM_ENUM("ADCR Source", wm8960_adcr_src_enum);
> > +
> > static const struct snd_kcontrol_new wm8960_lin_boost[] = {
> > SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
> > SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
> > @@ -344,6 +355,9 @@ SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
> > SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
> > SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
> >
> > +SND_SOC_DAPM_MUX("ADCL Source", SND_SOC_NOPM, 0, 0, &wm8960_adcl_mux),
> > +SND_SOC_DAPM_MUX("ADCR Source", SND_SOC_NOPM, 0, 0, &wm8960_adcr_mux),
> > +
> > SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
> > &wm8960_loutput_mixer[0],
> > ARRAY_SIZE(wm8960_loutput_mixer)),
> > @@ -399,8 +413,14 @@ static const struct snd_soc_dapm_route audio_paths[] = {
> > { "Right Input Mixer", NULL, "RINPUT2" },
> > { "Right Input Mixer", NULL, "RINPUT3" },
> >
> > - { "Left ADC", NULL, "Left Input Mixer" },
> > - { "Right ADC", NULL, "Right Input Mixer" },
> > + { "ADCL Source", "Left", "Left Input Mixer" },
> > + { "ADCL Source", "Right", "Right Input Mixer" },
> > +
> > + { "ADCR Source", "Left", "Left Input Mixer" },
> > + { "ADCR Source", "Right", "Right Input Mixer" },
> > +
> > + { "Left ADC", NULL, "ADCL Source" },
> > + { "Right ADC", NULL, "ADCR Source" },
>
> Are you sure this is correct? My reading is that those bits don't
> affect routing at all, they mearly determine how the channel is
> sent out on the AIF.
>
I have tested on my board, it can works, but it has something wrong.
If set "ADCR Source" to "Left", RINPUT1(RINPUT2 and RINPUT3)->"Right Input Mixer" will
be powered down, but "Right ADC" is still powered up. Do you have some best method to
set the audio route?
Thanks,
Zidan Wang
> Thanks,
> Charles
On Wed, Jun 17, 2015 at 04:58:30PM +0800, Zidan Wang wrote:
> On Tue, Jun 16, 2015 at 01:18:39PM +0100, Charles Keepax wrote:
> > On Tue, Jun 16, 2015 at 02:23:19PM +0800, Zidan Wang wrote:
> > > Add dapm kcontrols to select left/right ADC input source, one to select
> > > the left ADC input source and one for the right ADC input source.
> > >
> > > In default, the left ADC will select the left input, and the right ADC will
> > > select the right input. When the left(right) ADC select the right(left) input,
> > > the left(right) input path will be powered down.
> > >
> > > Signed-off-by: Zidan Wang <[email protected]>
> > > ---
> > > - { "Left ADC", NULL, "Left Input Mixer" },
> > > - { "Right ADC", NULL, "Right Input Mixer" },
> > > + { "ADCL Source", "Left", "Left Input Mixer" },
> > > + { "ADCL Source", "Right", "Right Input Mixer" },
> > > +
> > > + { "ADCR Source", "Left", "Left Input Mixer" },
> > > + { "ADCR Source", "Right", "Right Input Mixer" },
> > > +
> > > + { "Left ADC", NULL, "ADCL Source" },
> > > + { "Right ADC", NULL, "ADCR Source" },
> >
> > Are you sure this is correct? My reading is that those bits don't
> > affect routing at all, they mearly determine how the channel is
> > sent out on the AIF.
> >
> I have tested on my board, it can works, but it has something wrong.
>
> If set "ADCR Source" to "Left", RINPUT1(RINPUT2 and RINPUT3)->"Right Input Mixer" will
> be powered down, but "Right ADC" is still powered up. Do you have some best method to
> set the audio route?
I think your last patch that didn't touch DAPM for this was
closer to correct, I would revert back to something similar to
that but fixing up for the other comments on it.
Thanks,
Charles