2015-07-15 06:33:02

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 00/46] usb: gadget: rework ep matching and claiming mechanism

Hello,

This patch series reworks endpoint matching and claiming mechanism in
epautoconf. From v2 there are couple of new patches adding 'ep_match'
to usb_gadget_ops and removing chip-specific quirk handling from generic
code of autoconfig.

I'm not sure if this patch set isn't too long, as it has 46 patches,
but I decided to send it as single series to avoid problems with patch
applying order.

The aim of whole patchset is to rework epautoconf code to get rid of
things like name-based endpoint matching and UDC name-based quirks in
generic code. These needed to do some modifications in framework like
adding 'endpoint capabilities flags' feature or adding 'match_ep'.

Following paragraphs contain brief description of what modifications are
done by particular parts of this patch set:

Patch (1) introduces new safer endpoint claiming method, basing on new
'claimed' flag. It was discussed here [1]. I proposed this solution over
year ago and it was accepted, but I apparently forgot to send the final
version of my patch.

Patches (2-3) add the 'capabilities flags' structure and helper macros.
This solution is inspired by the 'feature flags' originally proposed
by Felipe Balbi in 2013 [2], but unfortunately implementation of this
feature has never been completed.

Patches (4-36) add' capabilites flags' support to all UDC drivers present
in the kernel tree. It's needed to be done before replacing old endpoint
matching mechanism, otherwise UDC drivers which doesn't set 'capabilities
flags' won't work with new matching function.

Patch (37) finally replaces old endpoint matching method with the new
one basing on capabilities flags.

These changes aims to get rid of code, which guesses endpoint capabilities
basing on it's name, and introduce new better replacement. In result
we have better way to describe types and directions supported by each
endpoint.

For example the old name-based method didn't allow to have endpoint
supporing two types of transfers - there were only ability to support
one or all of endpoint types. The 'capabilities flags' feature supply
precise, flexible and extensible mechanism of description of endpoint
hardware limitations, which is desired for proper endpoint matching.

Patch (38) removes chip-specific quirk from ep_matches() function.

Patches (39-40) remove code modifying endpoint and descriptor structures
from ep_matches() function and cleans it up to make it simpler and more
readable.

Patch (41) add 'match_ep' callback to usb_gadget_ops and make use of
it in epautoconf. This callback allows UDC drivers to supply non-standard
endpoint matching algorithms.

Patches (42-43) move ep_matches() and find_ep() functions outside
epautoconf and rename them to usb_gadget_ep_match_desc() and
gadget_find_ep_by_name(). It's because they may be useful in 'match_ep'
callbacks in UDC drivers to avoid writing repetitive code.

Patches (44-46) move chip-specific enpoint matching algorithms from
generic code of usb_ep_autoconfig_ss() function to UDC controller drivers
using 'match_ep' callback.

In the result we have epautoconf source free of chip-specific code, plus
two new mechanisms allowing to handle non-standard hardware limitations.

[1] https://lkml.org/lkml/2014/6/16/94
[2] http://www.spinics.net/lists/linux-usb/msg99662.html

Best regards,
Robert Baldyga

Changelog:

v3:
- addressed comments from Sergei Shtylyov

v2: https://lkml.org/lkml/2015/7/14/172
- remove PXA quirk from ep_matches() function without behaviour change
using ep capabilities flags
- separate ep and desc configuration code from ep_match() function
- add 'ep_match' to usb_gadget_ops and move chip-specific endpoint
matching algorithms from generic code to UDC controller drivers

v1: https://lkml.org/lkml/2015/7/8/436

Robert Baldyga (46):
usb: gadget: encapsulate endpoint claiming mechanism
usb: gadget: add endpoint capabilities flags
usb: gadget: add endpoint capabilities helper macros
staging: emxx_udc: add ep capabilities support
usb: chipidea: udc: add ep capabilities support
usb: dwc2: gadget: add ep capabilities support
usb: dwc3: gadget: add ep capabilities support
usb: gadget: amd5536udc: add ep capabilities support
usb: gadget: at91_udc: add ep capabilities support
usb: gadget: bcm63xx_udc: add ep capabilities support
usb: gadget: bdc: add ep capabilities support
usb: gadget: dummy-hcd: add ep capabilities support
usb: gadget: fotg210-udc: add ep capabilities support
usb: gadget: fsl_qe_udc: add ep capabilities support
usb: gadget: fsl_udc_core: add ep capabilities support
usb: gadget: fusb300_udc: add ep capabilities support
usb: gadget: goku_udc: add ep capabilities support
usb: gadget: gr_udc: add ep capabilities support
usb: gadget: lpc32xx_udc: add ep capabilities support
usb: gadget: m66592-udc: add ep capabilities support
usb: gadget: mv_u3d_core: add ep capabilities support
usb: gadget: mv_udc_core: add ep capabilities support
usb: gadget: net2272: add ep capabilities support
usb: gadget: net2280: add ep capabilities support
usb: gadget: omap_udc: add ep capabilities support
usb: gadget: pch_ud: add ep capabilities support
usb: gadget: pxa25x_udc: add ep capabilities support
usb: gadget: pxa27x_udc: add ep capabilities support
usb: gadget: r8a66597-udc: add ep capabilities support
usb: gadget: s3c-hsudc: add ep capabilities support
usb: gadget: s3c2410_udc: add ep capabilities support
usb: gadget: udc-xilinx: add ep capabilities support
usb: isp1760: udc: add ep capabilities support
usb: musb: gadget: add ep capabilities support
usb: renesas: gadget: add ep capabilities support
usb: gadget: atmel_usba_udc: add ep capabilities support
usb: gadget: epautoconf: add endpoint capabilities flags verification
usb: gadget: epautoconf: remove pxa quirk from ep_matches()
usb: gadget: epautoconf: remove ep and desc configuration from
ep_matches()
usb: gadget: epautoconf: rework ep_matches() function
usb: gadget: add 'ep_match' callback to usb_gadget_ops
usb: gadget: move ep_matches() from epautoconf to udc-core
usb: gadget: move find_ep() from epautoconf to gadget.h
usb: gadget: net2280: add net2280_match_ep() function
usb: gadget: goku_udc: add goku_match_ep() function
usb: musb: gadget: add musb_match_ep() function

drivers/staging/emxx_udc/emxx_udc.c | 60 ++++---
drivers/usb/chipidea/udc.c | 14 ++
drivers/usb/dwc2/gadget.c | 13 ++
drivers/usb/dwc3/gadget.c | 13 ++
drivers/usb/gadget/epautoconf.c | 280 +++++---------------------------
drivers/usb/gadget/udc/amd5536udc.c | 57 +++++--
drivers/usb/gadget/udc/at91_udc.c | 33 +++-
drivers/usb/gadget/udc/atmel_usba_udc.c | 11 ++
drivers/usb/gadget/udc/bcm63xx_udc.c | 25 ++-
drivers/usb/gadget/udc/bdc/bdc_ep.c | 9 +
drivers/usb/gadget/udc/dummy_hcd.c | 65 ++++++--
drivers/usb/gadget/udc/fotg210-udc.c | 11 ++
drivers/usb/gadget/udc/fsl_qe_udc.c | 11 ++
drivers/usb/gadget/udc/fsl_udc_core.c | 13 ++
drivers/usb/gadget/udc/fusb300_udc.c | 11 ++
drivers/usb/gadget/udc/goku_udc.c | 33 ++++
drivers/usb/gadget/udc/gr_udc.c | 11 ++
drivers/usb/gadget/udc/lpc32xx_udc.c | 32 ++++
drivers/usb/gadget/udc/m66592-udc.c | 11 ++
drivers/usb/gadget/udc/mv_u3d_core.c | 9 +
drivers/usb/gadget/udc/mv_udc_core.c | 9 +
drivers/usb/gadget/udc/net2272.c | 11 ++
drivers/usb/gadget/udc/net2280.c | 81 +++++++--
drivers/usb/gadget/udc/omap_udc.c | 22 +++
drivers/usb/gadget/udc/pch_udc.c | 14 +-
drivers/usb/gadget/udc/pxa25x_udc.c | 29 ++++
drivers/usb/gadget/udc/pxa27x_udc.h | 33 ++--
drivers/usb/gadget/udc/r8a66597-udc.c | 10 ++
drivers/usb/gadget/udc/s3c-hsudc.c | 15 ++
drivers/usb/gadget/udc/s3c2410_udc.c | 10 ++
drivers/usb/gadget/udc/udc-core.c | 69 ++++++++
drivers/usb/gadget/udc/udc-xilinx.c | 9 +
drivers/usb/isp1760/isp1760-udc.c | 11 ++
drivers/usb/musb/musb_gadget.c | 46 ++++++
drivers/usb/renesas_usbhs/mod_gadget.c | 6 +
include/linux/usb/gadget.h | 71 ++++++++
36 files changed, 833 insertions(+), 335 deletions(-)

--
1.9.1


2015-07-15 06:33:14

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 01/46] usb: gadget: encapsulate endpoint claiming mechanism

So far it was necessary for usb functions to set ep->driver_data in
endpoint obtained from autoconfig to non-null value, to indicate that
endpoint is claimed by function (in autoconfig it was checked if endpoint
has set this field to non-null value, and if it has, it was assumed that
it is claimed). It could cause bugs becouse if some function doesn't
set this field autoconfig could return the same endpoint more than one
time.

To help to avoid such bugs this patch adds claimed flag to struct usb_ep,
and encapsulates endpoint claiming mechanism inside usb_ep_autoconfig_ss()
and usb_ep_autoconfig_reset(), so now usb functions don't need to perform
any additional actions to mark endpoint obtained from autoconfig as claimed.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 11 ++++++-----
include/linux/usb/gadget.h | 1 +
2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 919cdfd..8e00ca7 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -53,7 +53,7 @@ ep_matches (
int num_req_streams = 0;

/* endpoint already claimed? */
- if (NULL != ep->driver_data)
+ if (ep->claimed)
return 0;

/* only support ep0 for portable CONTROL traffic */
@@ -240,7 +240,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
* updated with the assigned number of streams if it is
* different from the original value. To prevent the endpoint
* from being returned by a later autoconfig call, claim it by
- * assigning ep->driver_data to some non-null value.
+ * assigning ep->claimed to true.
*
* On failure, this returns a null endpoint descriptor.
*/
@@ -323,6 +323,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
found_ep:
ep->desc = NULL;
ep->comp_desc = NULL;
+ ep->claimed = true;
return ep;
}
EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
@@ -354,7 +355,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
* descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value
* is initialized as if the endpoint were used at full speed. To prevent
* the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * by assigning ep->claimed to true.
*
* On failure, this returns a null endpoint descriptor.
*/
@@ -373,7 +374,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
*
* Use this for devices where one configuration may need to assign
* endpoint resources very differently from the next one. It clears
- * state such as ep->driver_data and the record of assigned endpoints
+ * state such as ep->claimed and the record of assigned endpoints
* used by usb_ep_autoconfig().
*/
void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
@@ -381,7 +382,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
struct usb_ep *ep;

list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- ep->driver_data = NULL;
+ ep->claimed = false;
}
gadget->in_epnum = 0;
gadget->out_epnum = 0;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 4f3dfb7..fcb0a4e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -173,6 +173,7 @@ struct usb_ep {
const char *name;
const struct usb_ep_ops *ops;
struct list_head ep_list;
+ bool claimed;
unsigned maxpacket:16;
unsigned maxpacket_limit:16;
unsigned max_streams:16;
--
1.9.1

2015-07-15 06:33:37

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 02/46] usb: gadget: add endpoint capabilities flags

Introduce struct usb_ep_caps which contains information about capabilities
of usb endpoints - supported transfer types and directions. This structure
should be filled by UDC driver for each of its endpoints, and will be
used in epautoconf in new ep matching mechanism which will replace ugly
guessing of endpoint capabilities basing on its name.

Signed-off-by: Robert Baldyga <[email protected]>
---
include/linux/usb/gadget.h | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fcb0a4e..6f3e0fb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -141,10 +141,29 @@ struct usb_ep_ops {
};

/**
+ * struct usb_ep_caps - endpoint capabilities description
+ * @type_control:Endpoint supports control type (reserved for ep0).
+ * @type_iso:Endpoint supports isochronous transfers.
+ * @type_bulk:Endpoint supports bulk transfers.
+ * @type_int:Endpoint supports interrupt transfers.
+ * @dir_in:Endpoint supports IN direction.
+ * @dir_out:Endpoint supports OUT direction.
+ */
+struct usb_ep_caps {
+ unsigned type_control:1;
+ unsigned type_iso:1;
+ unsigned type_bulk:1;
+ unsigned type_int:1;
+ unsigned dir_in:1;
+ unsigned dir_out:1;
+};
+
+/**
* struct usb_ep - device side representation of USB endpoint
* @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
* @ops: Function pointers used to access hardware-specific operations.
* @ep_list:the gadget's ep_list holds all of its endpoints
+ * @caps:The structure describing types and directions supported by endoint.
* @maxpacket:The maximum packet size used on this endpoint. The initial
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
@@ -167,12 +186,14 @@ struct usb_ep_ops {
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
* and is accessed only in response to a driver setup() callback.
*/
+
struct usb_ep {
void *driver_data;

const char *name;
const struct usb_ep_ops *ops;
struct list_head ep_list;
+ struct usb_ep_caps caps;
bool claimed;
unsigned maxpacket:16;
unsigned maxpacket_limit:16;
--
1.9.1

2015-07-15 06:33:43

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 03/46] usb: gadget: add endpoint capabilities helper macros

Add macros useful while initializing array of endpoint capabilities
structures. These macros makes structure initialization more compact
to decrease number of code lines and increase readability of code.

Signed-off-by: Robert Baldyga <[email protected]>
---
include/linux/usb/gadget.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 6f3e0fb..e6cbc25 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -158,6 +158,26 @@ struct usb_ep_caps {
unsigned dir_out:1;
};

+#define USB_EP_CAPS_TYPE_CONTROL 0x01
+#define USB_EP_CAPS_TYPE_ISO 0x02
+#define USB_EP_CAPS_TYPE_BULK 0x04
+#define USB_EP_CAPS_TYPE_INT 0x08
+#define USB_EP_CAPS_TYPE_ALL \
+ (USB_EP_CAPS_TYPE_ISO | USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
+#define USB_EP_CAPS_DIR_IN 0x01
+#define USB_EP_CAPS_DIR_OUT 0x02
+#define USB_EP_CAPS_DIR_ALL (USB_EP_CAPS_DIR_IN | USB_EP_CAPS_DIR_OUT)
+
+#define USB_EP_CAPS(_type, _dir) \
+ { \
+ .type_control = !!(_type & USB_EP_CAPS_TYPE_CONTROL), \
+ .type_iso = !!(_type & USB_EP_CAPS_TYPE_ISO), \
+ .type_bulk = !!(_type & USB_EP_CAPS_TYPE_BULK), \
+ .type_int = !!(_type & USB_EP_CAPS_TYPE_INT), \
+ .dir_in = !!(_dir & USB_EP_CAPS_DIR_IN), \
+ .dir_out = !!(_dir & USB_EP_CAPS_DIR_OUT), \
+ }
+
/**
* struct usb_ep - device side representation of USB endpoint
* @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
--
1.9.1

2015-07-15 06:33:48

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 04/46] staging: emxx_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Fixed typo in "epc-nulk" to "epc-bulk".

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/staging/emxx_udc/emxx_udc.c | 60 ++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 31 deletions(-)

diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 3b7aa36..0d64bee 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -3153,36 +3153,33 @@ static const struct usb_gadget_ops nbu2ss_gadget_ops = {
.ioctl = nbu2ss_gad_ioctl,
};

-static const char g_ep0_name[] = "ep0";
-static const char g_ep1_name[] = "ep1-bulk";
-static const char g_ep2_name[] = "ep2-bulk";
-static const char g_ep3_name[] = "ep3in-int";
-static const char g_ep4_name[] = "ep4-iso";
-static const char g_ep5_name[] = "ep5-iso";
-static const char g_ep6_name[] = "ep6-bulk";
-static const char g_ep7_name[] = "ep7-bulk";
-static const char g_ep8_name[] = "ep8in-int";
-static const char g_ep9_name[] = "ep9-iso";
-static const char g_epa_name[] = "epa-iso";
-static const char g_epb_name[] = "epb-bulk";
-static const char g_epc_name[] = "epc-nulk";
-static const char g_epd_name[] = "epdin-int";
-
-static const char *gp_ep_name[NUM_ENDPOINTS] = {
- g_ep0_name,
- g_ep1_name,
- g_ep2_name,
- g_ep3_name,
- g_ep4_name,
- g_ep5_name,
- g_ep6_name,
- g_ep7_name,
- g_ep8_name,
- g_ep9_name,
- g_epa_name,
- g_epb_name,
- g_epc_name,
- g_epd_name,
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} ep_info[NUM_ENDPOINTS] = {
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }
+
+ EP_INFO("ep0", CONTROL, ALL),
+ EP_INFO("ep1-bulk", BULK, ALL),
+ EP_INFO("ep2-bulk", BULK, ALL),
+ EP_INFO("ep3in-int", INT, IN),
+ EP_INFO("ep4-iso", INT, ALL),
+ EP_INFO("ep5-iso", ISO, ALL),
+ EP_INFO("ep6-bulk", ISO, ALL),
+ EP_INFO("ep7-bulk", BULK, ALL),
+ EP_INFO("ep8in-int", INT, IN),
+ EP_INFO("ep9-iso", ISO, ALL),
+ EP_INFO("epa-iso", ISO, ALL),
+ EP_INFO("epb-bulk", BULK, ALL),
+ EP_INFO("epc-bulk", BULK, ALL),
+ EP_INFO("epdin-int", INT, IN),
+
+#undef EP_INFO
};

/*-------------------------------------------------------------------------*/
@@ -3200,7 +3197,8 @@ static void __init nbu2ss_drv_ep_init(struct nbu2ss_udc *udc)
ep->desc = NULL;

ep->ep.driver_data = NULL;
- ep->ep.name = gp_ep_name[i];
+ ep->ep.name = ep_info[i].name;
+ ep->ep.caps = ep_info[i].caps;
ep->ep.ops = &nbu2ss_ep_ops;

usb_ep_set_maxpacket_limit(&ep->ep,
--
1.9.1

2015-07-15 06:33:58

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 05/46] usb: chipidea: udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/chipidea/udc.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 764f668..eff7cfb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1624,6 +1624,20 @@ static int init_eps(struct ci_hdrc *ci)

hwep->ep.name = hwep->name;
hwep->ep.ops = &usb_ep_ops;
+
+ if (i == 0) {
+ hwep->ep.caps.type_control = true;
+ } else {
+ hwep->ep.caps.type_iso = true;
+ hwep->ep.caps.type_bulk = true;
+ hwep->ep.caps.type_int = true;
+ }
+
+ if (j == TX)
+ hwep->ep.caps.dir_in = true;
+ else
+ hwep->ep.caps.dir_out = true;
+
/*
* for ep0: maxP defined in desc, for other
* eps, maxP is set by epautoconfig() called
--
1.9.1

2015-07-15 06:34:06

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 06/46] usb: dwc2: gadget: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/dwc2/gadget.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4d47b7c..8771b66 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3289,6 +3289,19 @@ static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg,
usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
hs_ep->ep.ops = &s3c_hsotg_ep_ops;

+ if (epnum == 0) {
+ hs_ep->ep.caps.type_control = true;
+ } else {
+ hs_ep->ep.caps.type_iso = true;
+ hs_ep->ep.caps.type_bulk = true;
+ hs_ep->ep.caps.type_int = true;
+ }
+
+ if (dir_in)
+ hs_ep->ep.caps.dir_in = true;
+ else
+ hs_ep->ep.caps.dir_out = true;
+
/*
* if we're using dma, we need to set the next-endpoint pointer
* to be something valid.
--
1.9.1

2015-07-15 06:34:12

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 07/46] usb: dwc3: gadget: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/dwc3/gadget.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 333a7c0..8d1f768 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1713,6 +1713,19 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
return ret;
}

+ if (epnum == 0) {
+ dep->endpoint.caps.type_control = true;
+ } else {
+ dep->endpoint.caps.type_iso = true;
+ dep->endpoint.caps.type_bulk = true;
+ dep->endpoint.caps.type_int = true;
+ }
+
+ if (epnum & 1)
+ dep->endpoint.caps.dir_in = true;
+ else
+ dep->endpoint.caps.dir_out = true;
+
INIT_LIST_HEAD(&dep->request_list);
INIT_LIST_HEAD(&dep->req_queued);
}
--
1.9.1

2015-07-15 06:34:37

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 08/46] usb: gadget: amd5536udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/amd5536udc.c | 57 ++++++++++++++++++++++++++++++-------
1 file changed, 47 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index de7e5e2..1a1d91c 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -138,15 +138,51 @@ static DECLARE_TASKLET(disconnect_tasklet, udc_tasklet_disconnect,

/* endpoint names used for print */
static const char ep0_string[] = "ep0in";
-static const char *const ep_string[] = {
- ep0_string,
- "ep1in-int", "ep2in-bulk", "ep3in-bulk", "ep4in-bulk", "ep5in-bulk",
- "ep6in-bulk", "ep7in-bulk", "ep8in-bulk", "ep9in-bulk", "ep10in-bulk",
- "ep11in-bulk", "ep12in-bulk", "ep13in-bulk", "ep14in-bulk",
- "ep15in-bulk", "ep0out", "ep1out-bulk", "ep2out-bulk", "ep3out-bulk",
- "ep4out-bulk", "ep5out-bulk", "ep6out-bulk", "ep7out-bulk",
- "ep8out-bulk", "ep9out-bulk", "ep10out-bulk", "ep11out-bulk",
- "ep12out-bulk", "ep13out-bulk", "ep14out-bulk", "ep15out-bulk"
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }
+
+ EP_INFO(ep0_string, CONTROL, IN),
+ EP_INFO("ep1in-int", BULK, IN),
+ EP_INFO("ep2in-bulk", BULK, IN),
+ EP_INFO("ep3in-bulk", BULK, IN),
+ EP_INFO("ep4in-bulk", BULK, IN),
+ EP_INFO("ep5in-bulk", BULK, IN),
+ EP_INFO("ep6in-bulk", BULK, IN),
+ EP_INFO("ep7in-bulk", BULK, IN),
+ EP_INFO("ep8in-bulk", BULK, IN),
+ EP_INFO("ep9in-bulk", BULK, IN),
+ EP_INFO("ep10in-bulk", BULK, IN),
+ EP_INFO("ep11in-bulk", BULK, IN),
+ EP_INFO("ep12in-bulk", BULK, IN),
+ EP_INFO("ep13in-bulk", BULK, IN),
+ EP_INFO("ep14in-bulk", BULK, IN),
+ EP_INFO("ep15in-bulk", BULK, IN),
+ EP_INFO("ep0out", CONTROL, OUT),
+ EP_INFO("ep1out-bulk", BULK, OUT),
+ EP_INFO("ep2out-bulk", BULK, OUT),
+ EP_INFO("ep3out-bulk", BULK, OUT),
+ EP_INFO("ep4out-bulk", BULK, OUT),
+ EP_INFO("ep5out-bulk", BULK, OUT),
+ EP_INFO("ep6out-bulk", BULK, OUT),
+ EP_INFO("ep7out-bulk", BULK, OUT),
+ EP_INFO("ep8out-bulk", BULK, OUT),
+ EP_INFO("ep9out-bulk", BULK, OUT),
+ EP_INFO("ep10out-bulk", BULK, OUT),
+ EP_INFO("ep11out-bulk", BULK, OUT),
+ EP_INFO("ep12out-bulk", BULK, OUT),
+ EP_INFO("ep13out-bulk", BULK, OUT),
+ EP_INFO("ep14out-bulk", BULK, OUT),
+ EP_INFO("ep15out-bulk", BULK, OUT),
+
+#undef EP_INFO
};

/* DMA usage flag */
@@ -1517,7 +1553,8 @@ static void udc_setup_endpoints(struct udc *dev)
for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
ep = &dev->ep[tmp];
ep->dev = dev;
- ep->ep.name = ep_string[tmp];
+ ep->ep.name = ep_info[tmp].name;
+ ep->ep.caps = ep_info[tmp].caps;
ep->num = tmp;
/* txfifo size is calculated at enable time */
ep->txfifo = dev->txfifo;
--
1.9.1

2015-07-15 06:34:26

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 09/46] usb: gadget: at91_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/at91_udc.c | 33 ++++++++++++++++++++++++---------
1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index fc42264..a04b073 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -59,15 +59,29 @@
#define DRIVER_VERSION "3 May 2006"

static const char driver_name [] = "at91_udc";
-static const char * const ep_names[] = {
- "ep0",
- "ep1",
- "ep2",
- "ep3-int",
- "ep4",
- "ep5",
+
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }
+
+ EP_INFO("ep0", CONTROL, ALL),
+ EP_INFO("ep1", ALL, ALL),
+ EP_INFO("ep2", ALL, ALL),
+ EP_INFO("ep3-int", INT, ALL),
+ EP_INFO("ep4", ALL, ALL),
+ EP_INFO("ep5", ALL, ALL),
+
+#undef EP_INFO
};
-#define ep0name ep_names[0]
+
+#define ep0name ep_info[0].name

#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000)

@@ -1830,7 +1844,8 @@ static int at91udc_probe(struct platform_device *pdev)

for (i = 0; i < NUM_ENDPOINTS; i++) {
ep = &udc->ep[i];
- ep->ep.name = ep_names[i];
+ ep->ep.name = ep_info[i].name;
+ ep->ep.caps = ep_info[i].caps;
ep->ep.ops = &at91_ep_ops;
ep->udc = udc;
ep->int_mask = BIT(i);
--
1.9.1

2015-07-15 06:34:41

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 10/46] usb: gadget: bcm63xx_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/bcm63xx_udc.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index 9db968b..c5e0894 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -44,9 +44,25 @@
#define DRV_MODULE_NAME "bcm63xx_udc"

static const char bcm63xx_ep0name[] = "ep0";
-static const char *const bcm63xx_ep_name[] = {
- bcm63xx_ep0name,
- "ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int",
+
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} bcm63xx_ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }
+
+ EP_INFO(bcm63xx_ep0name, CONTROL, ALL),
+ EP_INFO("ep1in-bulk", BULK, IN),
+ EP_INFO("ep2out-bulk", BULK, OUT),
+ EP_INFO("ep3in-int", INT, IN),
+ EP_INFO("ep4out-int", INT, OUT),
+
+#undef EP_INFO
};

static bool use_fullspeed;
@@ -943,7 +959,8 @@ static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
for (i = 0; i < BCM63XX_NUM_EP; i++) {
struct bcm63xx_ep *bep = &udc->bep[i];

- bep->ep.name = bcm63xx_ep_name[i];
+ bep->ep.name = bcm63xx_ep_info[i].name;
+ bep->ep.caps = bcm63xx_ep_info[i].caps;
bep->ep_num = i;
bep->ep.ops = &bcm63xx_udc_ep_ops;
list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
--
1.9.1

2015-07-15 06:34:42

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 11/46] usb: gadget: bdc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/bdc/bdc_ep.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index b04980c..f9a8f57 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -1952,12 +1952,18 @@ static int init_ep(struct bdc *bdc, u32 epnum, u32 dir)
ep->bdc = bdc;
ep->dir = dir;

+ if (dir)
+ ep->usb_ep.caps.dir_in = true;
+ else
+ ep->usb_ep.caps.dir_out = true;
+
/* ep->ep_num is the index inside bdc_ep */
if (epnum == 1) {
ep->ep_num = 1;
bdc->bdc_ep_array[ep->ep_num] = ep;
snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1);
usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE);
+ ep->usb_ep.caps.type_control = true;
ep->comp_desc = NULL;
bdc->gadget.ep0 = &ep->usb_ep;
} else {
@@ -1971,6 +1977,9 @@ static int init_ep(struct bdc *bdc, u32 epnum, u32 dir)
dir & 1 ? "in" : "out");

usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024);
+ ep->usb_ep.caps.type_iso = true;
+ ep->usb_ep.caps.type_bulk = true;
+ ep->usb_ep.caps.type_int = true;
ep->usb_ep.max_streams = 0;
list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list);
}
--
1.9.1

2015-07-15 06:34:48

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 12/46] usb: gadget: dummy-hcd: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/dummy_hcd.c | 65 +++++++++++++++++++++++++++++---------
1 file changed, 50 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 181112c..69fd29a 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -127,23 +127,57 @@ static inline struct dummy_request *usb_request_to_dummy_request

static const char ep0name[] = "ep0";

-static const char *const ep_name[] = {
- ep0name, /* everyone has ep0 */
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} ep_info[] = {
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }

+ /* everyone has ep0 */
+ EP_INFO(ep0name, CONTROL, ALL),
/* act like a pxa250: fifteen fixed function endpoints */
- "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
- "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
- "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
- "ep15in-int",
-
+ EP_INFO("ep1in-bulk", BULK, IN),
+ EP_INFO("ep2out-bulk", BULK, OUT),
+ EP_INFO("ep3in-iso", ISO, IN),
+ EP_INFO("ep4out-iso", ISO, OUT),
+ EP_INFO("ep5in-int", INT, IN),
+ EP_INFO("ep6in-bulk", BULK, IN),
+ EP_INFO("ep7out-bulk", BULK, OUT),
+ EP_INFO("ep8in-iso", ISO, IN),
+ EP_INFO("ep9out-iso", ISO, OUT),
+ EP_INFO("ep10in-int", INT, IN),
+ EP_INFO("ep11in-bulk", BULK, IN),
+ EP_INFO("ep12out-bulk", BULK, OUT),
+ EP_INFO("ep13in-iso", ISO, IN),
+ EP_INFO("ep14out-iso", ISO, OUT),
+ EP_INFO("ep15in-int", INT, IN),
/* or like sa1100: two fixed function endpoints */
- "ep1out-bulk", "ep2in-bulk",
-
+ EP_INFO("ep1out-bulk", BULK, OUT),
+ EP_INFO("ep2in-bulk", BULK, IN),
/* and now some generic EPs so we have enough in multi config */
- "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
- "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
+ EP_INFO("ep3out", ALL, OUT),
+ EP_INFO("ep4in", ALL, IN),
+ EP_INFO("ep5out", ALL, OUT),
+ EP_INFO("ep6out", ALL, OUT),
+ EP_INFO("ep7in", ALL, IN),
+ EP_INFO("ep8out", ALL, OUT),
+ EP_INFO("ep9in", ALL, IN),
+ EP_INFO("ep10out", ALL, OUT),
+ EP_INFO("ep11out", ALL, OUT),
+ EP_INFO("ep12in", ALL, IN),
+ EP_INFO("ep13out", ALL, OUT),
+ EP_INFO("ep14in", ALL, IN),
+ EP_INFO("ep15out", ALL, OUT),
+
+#undef EP_INFO
};
-#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
+
+#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info)

/*-------------------------------------------------------------------------*/

@@ -938,9 +972,10 @@ static void init_dummy_udc_hw(struct dummy *dum)
for (i = 0; i < DUMMY_ENDPOINTS; i++) {
struct dummy_ep *ep = &dum->ep[i];

- if (!ep_name[i])
+ if (!ep_info[i].name)
break;
- ep->ep.name = ep_name[i];
+ ep->ep.name = ep_info[i].name;
+ ep->ep.caps = ep_info[i].caps;
ep->ep.ops = &dummy_ep_ops;
list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
ep->halted = ep->wedged = ep->already_seen =
@@ -1684,7 +1719,7 @@ static void dummy_timer(unsigned long _dum_hcd)
}

for (i = 0; i < DUMMY_ENDPOINTS; i++) {
- if (!ep_name[i])
+ if (!ep_info[i].name)
break;
dum->ep[i].already_seen = 0;
}
--
1.9.1

2015-07-15 06:34:54

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 13/46] usb: gadget: fotg210-udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index e547ea7..960c70c 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1153,6 +1153,17 @@ static int fotg210_udc_probe(struct platform_device *pdev)
ep->ep.name = fotg210_ep_name[i];
ep->ep.ops = &fotg210_ep_ops;
usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
+
+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}
usb_ep_set_maxpacket_limit(&fotg210->ep[0]->ep, 0x40);
fotg210->gadget.ep0 = &fotg210->ep[0]->ep;
--
1.9.1

2015-07-15 06:35:20

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 14/46] usb: gadget: fsl_qe_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/fsl_qe_udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index e0822f1..5fb6f8b 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -2417,6 +2417,17 @@ static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
strcpy(ep->name, ep_name[pipe_num]);
ep->ep.name = ep_name[pipe_num];

+ if (pipe_num == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
+
ep->ep.ops = &qe_ep_ops;
ep->stopped = 1;
usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
--
1.9.1

2015-07-15 06:35:10

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 15/46] usb: gadget: fsl_udc_core: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/fsl_udc_core.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index c60022b..aab5221 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2313,6 +2313,19 @@ static int struct_ep_setup(struct fsl_udc *udc, unsigned char index,
ep->ep.ops = &fsl_ep_ops;
ep->stopped = 0;

+ if (index == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ if (index & 1)
+ ep->ep.caps.dir_in = true;
+ else
+ ep->ep.caps.dir_out = true;
+
/* for ep0: maxP defined in desc
* for other eps, maxP is set by epautoconfig() called by gadget layer
*/
--
1.9.1

2015-07-15 06:35:22

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 16/46] usb: gadget: fusb300_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/fusb300_udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 3970f45..948845c 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1450,6 +1450,17 @@ static int fusb300_probe(struct platform_device *pdev)
ep->ep.name = fusb300_ep_name[i];
ep->ep.ops = &fusb300_ep_ops;
usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE);
+
+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}
usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE);
fusb300->ep[0]->epnum = 0;
--
1.9.1

2015-07-15 06:48:15

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 17/46] usb: gadget: goku_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/goku_udc.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 9e8d842..46b8d14 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1257,6 +1257,14 @@ static void udc_reinit (struct goku_udc *dev)
INIT_LIST_HEAD (&ep->queue);

ep_reset(NULL, ep);
+
+ if (i == 0)
+ ep->ep.caps.type_control = true;
+ else
+ ep->ep.caps.type_bulk = true;
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}

dev->ep[0].reg_mode = NULL;
--
1.9.1

2015-07-15 06:47:36

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 18/46] usb: gadget: gr_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/gr_udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index c886887..8aa2593 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2018,12 +2018,23 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)

usb_ep_set_maxpacket_limit(&ep->ep, MAX_CTRL_PL_SIZE);
ep->bytes_per_buffer = MAX_CTRL_PL_SIZE;
+
+ ep->ep.caps.type_control = true;
} else {
usb_ep_set_maxpacket_limit(&ep->ep, (u16)maxplimit);
list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
}
list_add_tail(&ep->ep_list, &dev->ep_list);

+ if (is_in)
+ ep->ep.caps.dir_in = true;
+ else
+ ep->ep.caps.dir_out = true;
+
ep->tailbuf = dma_alloc_coherent(dev->dev, ep->ep.maxpacket_limit,
&ep->tailbuf_paddr, GFP_ATOMIC);
if (!ep->tailbuf)
--
1.9.1

2015-07-15 06:35:40

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 19/46] usb: gadget: lpc32xx_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/lpc32xx_udc.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 3b6a785..00b5006 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -2575,6 +2575,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep0",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 0,
@@ -2586,6 +2588,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep1-int",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 2,
@@ -2597,6 +2601,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep2-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 4,
@@ -2608,6 +2614,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep3-iso",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 1023,
.hwep_num_base = 6,
@@ -2619,6 +2627,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep4-int",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 8,
@@ -2630,6 +2640,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep5-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 10,
@@ -2641,6 +2653,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep6-iso",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 1023,
.hwep_num_base = 12,
@@ -2652,6 +2666,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep7-int",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 14,
@@ -2663,6 +2679,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep8-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 16,
@@ -2674,6 +2692,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep9-iso",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 1023,
.hwep_num_base = 18,
@@ -2685,6 +2705,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep10-int",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 20,
@@ -2696,6 +2718,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep11-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 22,
@@ -2707,6 +2731,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep12-iso",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 1023,
.hwep_num_base = 24,
@@ -2718,6 +2744,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep13-int",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 26,
@@ -2729,6 +2757,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep14-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 64,
.hwep_num_base = 28,
@@ -2740,6 +2770,8 @@ static const struct lpc32xx_udc controller_template = {
.ep = {
.name = "ep15-bulk",
.ops = &lpc32xx_ep_ops,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.maxpacket = 1023,
.hwep_num_base = 30,
--
1.9.1

2015-07-15 06:36:02

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 20/46] usb: gadget: m66592-udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/m66592-udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index 309706f..e404553 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -1644,6 +1644,17 @@ static int m66592_probe(struct platform_device *pdev)
ep->ep.name = m66592_ep_name[i];
ep->ep.ops = &m66592_ep_ops;
usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}
usb_ep_set_maxpacket_limit(&m66592->ep[0].ep, 64);
m66592->ep[0].pipenum = 0;
--
1.9.1

2015-07-15 06:35:53

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 21/46] usb: gadget: mv_u3d_core: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/mv_u3d_core.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index ea35a24..4c48969 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1324,6 +1324,9 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
ep->ep.ops = &mv_u3d_ep_ops;
ep->wedge = 0;
usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE);
+ ep->ep.caps.type_control = true;
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
ep->ep_num = 0;
ep->ep.desc = &mv_u3d_ep0_desc;
INIT_LIST_HEAD(&ep->queue);
@@ -1339,14 +1342,20 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
if (i & 1) {
snprintf(name, sizeof(name), "ep%din", i >> 1);
ep->direction = MV_U3D_EP_DIR_IN;
+ ep->ep.caps.dir_in = true;
} else {
snprintf(name, sizeof(name), "ep%dout", i >> 1);
ep->direction = MV_U3D_EP_DIR_OUT;
+ ep->ep.caps.dir_out = true;
}
ep->u3d = u3d;
strncpy(ep->name, name, sizeof(ep->name));
ep->ep.name = ep->name;

+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+
ep->ep.ops = &mv_u3d_ep_ops;
usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
ep->ep_num = i / 2;
--
1.9.1

2015-07-15 06:36:05

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 22/46] usb: gadget: mv_udc_core: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/mv_udc_core.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index d32160d..306a7ff 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -1257,6 +1257,9 @@ static int eps_init(struct mv_udc *udc)
ep->wedge = 0;
ep->stopped = 0;
usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE);
+ ep->ep.caps.type_control = true;
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
ep->ep_num = 0;
ep->ep.desc = &mv_ep0_desc;
INIT_LIST_HEAD(&ep->queue);
@@ -1269,14 +1272,20 @@ static int eps_init(struct mv_udc *udc)
if (i % 2) {
snprintf(name, sizeof(name), "ep%din", i / 2);
ep->direction = EP_DIR_IN;
+ ep->ep.caps.dir_in = true;
} else {
snprintf(name, sizeof(name), "ep%dout", i / 2);
ep->direction = EP_DIR_OUT;
+ ep->ep.caps.dir_out = true;
}
ep->udc = udc;
strncpy(ep->name, name, sizeof(ep->name));
ep->ep.name = ep->name;

+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+
ep->ep.ops = &mv_ep_ops;
ep->stopped = 0;
usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
--
1.9.1

2015-07-15 06:46:14

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 23/46] usb: gadget: net2272: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/net2272.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 195baf3..34ec1ec 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -1404,6 +1404,17 @@ net2272_usb_reinit(struct net2272 *dev)
else
ep->fifo_size = 64;
net2272_ep_reset(ep);
+
+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}
usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64);

--
1.9.1

2015-07-15 06:36:12

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 24/46] usb: gadget: net2280: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/net2280.c | 50 ++++++++++++++++++++++++++++++----------
1 file changed, 38 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 2bee912..0295cf7 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -74,19 +74,41 @@ static const char driver_desc[] = DRIVER_DESC;

static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 };
static const char ep0name[] = "ep0";
-static const char *const ep_name[] = {
- ep0name,
- "ep-a", "ep-b", "ep-c", "ep-d",
- "ep-e", "ep-f", "ep-g", "ep-h",
-};

-/* Endpoint names for usb3380 advance mode */
-static const char *const ep_name_adv[] = {
- ep0name,
- "ep1in", "ep2out", "ep3in", "ep4out",
- "ep1out", "ep2in", "ep3out", "ep4in",
+#define EP_INFO(_name, _type, _dir) \
+ { \
+ .name = _name, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## _type, \
+ USB_EP_CAPS_DIR_ ## _dir), \
+ }
+
+static const struct {
+ const char *name;
+ const struct usb_ep_caps caps;
+} ep_info_dft[] = { /* Default endpoint configuration */
+ EP_INFO(ep0name, CONTROL, ALL),
+ EP_INFO("ep-a", ALL, ALL),
+ EP_INFO("ep-b", ALL, ALL),
+ EP_INFO("ep-c", ALL, ALL),
+ EP_INFO("ep-d", ALL, ALL),
+ EP_INFO("ep-e", ALL, ALL),
+ EP_INFO("ep-f", ALL, ALL),
+ EP_INFO("ep-g", ALL, ALL),
+ EP_INFO("ep-h", ALL, ALL),
+}, ep_info_adv[] = { /* Endpoints for usb3380 advance mode */
+ EP_INFO(ep0name, CONTROL, ALL),
+ EP_INFO("ep1in", ALL, IN),
+ EP_INFO("ep2out", ALL, OUT),
+ EP_INFO("ep3in", ALL, IN),
+ EP_INFO("ep4out", ALL, OUT),
+ EP_INFO("ep1out", ALL, OUT),
+ EP_INFO("ep2in", ALL, IN),
+ EP_INFO("ep3out", ALL, OUT),
+ EP_INFO("ep4in", ALL, IN),
};

+#undef EP_INFO
+
/* mode 0 == ep-{a,b,c,d} 1K fifo each
* mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
* mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
@@ -2055,7 +2077,8 @@ static void usb_reinit_228x(struct net2280 *dev)
for (tmp = 0; tmp < 7; tmp++) {
struct net2280_ep *ep = &dev->ep[tmp];

- ep->ep.name = ep_name[tmp];
+ ep->ep.name = ep_info_dft[tmp].name;
+ ep->ep.caps = ep_info_dft[tmp].caps;
ep->dev = dev;
ep->num = tmp;

@@ -2095,7 +2118,10 @@ static void usb_reinit_338x(struct net2280 *dev)
for (i = 0; i < dev->n_ep; i++) {
struct net2280_ep *ep = &dev->ep[i];

- ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i];
+ ep->ep.name = dev->enhanced_mode ? ep_info_adv[i].name :
+ ep_info_dft[i].name;
+ ep->ep.caps = dev->enhanced_mode ? ep_info_adv[i].caps :
+ ep_info_dft[i].caps;
ep->dev = dev;
ep->num = i;

--
1.9.1

2015-07-15 06:36:22

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 25/46] usb: gadget: omap_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index e2fcdb8..9b7d394 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2579,6 +2579,28 @@ omap_ep_setup(char *name, u8 addr, u8 type,
ep->double_buf = dbuf;
ep->udc = udc;

+ switch (type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ep->ep.caps.type_control = true;
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ ep->ep.caps.type_iso = true;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ep->ep.caps.type_bulk = true;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ ep->ep.caps.type_int = true;
+ break;
+ };
+
+ if (addr & USB_DIR_IN)
+ ep->ep.caps.dir_in = true;
+ else
+ ep->ep.caps.dir_out = true;
+
ep->ep.name = ep->name;
ep->ep.ops = &omap_ep_ops;
ep->maxpacket = maxp;
--
1.9.1

2015-07-15 06:36:35

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/pch_udc.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 613547f..cc8fb3c 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -2895,11 +2895,21 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
ep->in = ~i & 1;
ep->ep.name = ep_string[i];
ep->ep.ops = &pch_udc_ep_ops;
- if (ep->in)
+ if (ep->in) {
ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
- else
+ ep->ep.caps.dir_in = true;
+ } else {
ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
UDC_EP_REG_SHIFT;
+ ep->ep.caps.dir_out = true;
+ }
+ if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
/* need to set ep->ep.maxpacket and set Default Configuration?*/
usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
--
1.9.1

2015-07-15 06:45:05

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 27/46] usb: gadget: pxa25x_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/pxa25x_udc.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index f6cbe66..1301e29 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -1821,6 +1821,8 @@ static struct pxa25x_udc memory = {
.name = ep0name,
.ops = &pxa25x_ep_ops,
.maxpacket = EP0_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
.reg_udccs = &UDCCS0,
@@ -1833,6 +1835,8 @@ static struct pxa25x_udc memory = {
.name = "ep1in-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1846,6 +1850,8 @@ static struct pxa25x_udc memory = {
.name = "ep2out-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1861,6 +1867,8 @@ static struct pxa25x_udc memory = {
.name = "ep3in-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -1874,6 +1882,8 @@ static struct pxa25x_udc memory = {
.name = "ep4out-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -1888,6 +1898,8 @@ static struct pxa25x_udc memory = {
.name = "ep5in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
@@ -1903,6 +1915,8 @@ static struct pxa25x_udc memory = {
.name = "ep6in-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1916,6 +1930,8 @@ static struct pxa25x_udc memory = {
.name = "ep7out-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1930,6 +1946,8 @@ static struct pxa25x_udc memory = {
.name = "ep8in-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -1943,6 +1961,8 @@ static struct pxa25x_udc memory = {
.name = "ep9out-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -1957,6 +1977,8 @@ static struct pxa25x_udc memory = {
.name = "ep10in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
@@ -1972,6 +1994,8 @@ static struct pxa25x_udc memory = {
.name = "ep11in-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1985,6 +2009,8 @@ static struct pxa25x_udc memory = {
.name = "ep12out-bulk",
.ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = BULK_FIFO_SIZE,
@@ -1999,6 +2025,8 @@ static struct pxa25x_udc memory = {
.name = "ep13in-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -2012,6 +2040,8 @@ static struct pxa25x_udc memory = {
.name = "ep14out-iso",
.ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_OUT),
},
.dev = &memory,
.fifo_size = ISO_FIFO_SIZE,
@@ -2026,6 +2056,8 @@ static struct pxa25x_udc memory = {
.name = "ep15in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_IN),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
--
1.9.1

2015-07-15 06:36:44

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 28/46] usb: gadget: pxa27x_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/pxa27x_udc.h | 33 ++++++++++++++++++---------------
1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h
index 11e1423..ded058c 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.h
+++ b/drivers/usb/gadget/udc/pxa27x_udc.h
@@ -234,25 +234,28 @@
/*
* Endpoint definition helpers
*/
-#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
-{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt, ctype, cdir) \
+{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, \
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ ## ctype, \
+ USB_EP_CAPS_DIR_ ## cdir), }, \
.desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
- .bmAttributes = type, \
+ .bmAttributes = USB_ENDPOINT_XFER_ ## type, \
.wMaxPacketSize = maxpkt, }, \
.dev = &memory \
}
-#define USB_EP_BULK(addr, bname, dir) \
- USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
-#define USB_EP_ISO(addr, bname, dir) \
- USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
-#define USB_EP_INT(addr, bname, dir) \
- USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
-#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1)
-#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0)
-#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1)
-#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0)
-#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1)
-#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, 0, EP0_FIFO_SIZE)
+#define USB_EP_BULK(addr, bname, dir, cdir) \
+ USB_EP_DEF(addr, bname, dir, BULK, BULK_FIFO_SIZE, BULK, cdir)
+#define USB_EP_ISO(addr, bname, dir, cdir) \
+ USB_EP_DEF(addr, bname, dir, ISOC, ISO_FIFO_SIZE, ISO, cdir)
+#define USB_EP_INT(addr, bname, dir, cdir) \
+ USB_EP_DEF(addr, bname, dir, INT, INT_FIFO_SIZE, INT, cdir)
+#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1, IN)
+#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0, OUT)
+#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1, IN)
+#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0, OUT)
+#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1, IN)
+#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, CONTROL, \
+ EP0_FIFO_SIZE, CONTROL, ALL)

#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
{ \
--
1.9.1

2015-07-15 06:44:32

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 29/46] usb: gadget: r8a66597-udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/r8a66597-udc.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 0293f71..baa0609 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1935,6 +1935,16 @@ static int r8a66597_probe(struct platform_device *pdev)
ep->ep.name = r8a66597_ep_name[i];
ep->ep.ops = &r8a66597_ep_ops;
usb_ep_set_maxpacket_limit(&ep->ep, 512);
+
+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
}
usb_ep_set_maxpacket_limit(&r8a66597->ep[0].ep, 64);
r8a66597->ep[0].pipenum = 0;
--
1.9.1

2015-07-15 06:36:56

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 30/46] usb: gadget: s3c-hsudc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/s3c-hsudc.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 85a712a..e9def42 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -1005,6 +1005,21 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
hsep->stopped = 0;
hsep->wedge = 0;

+ if (epnum == 0) {
+ hsep->ep.caps.type_control = true;
+ hsep->ep.caps.dir_in = true;
+ hsep->ep.caps.dir_out = true;
+ } else {
+ hsep->ep.caps.type_iso = true;
+ hsep->ep.caps.type_bulk = true;
+ hsep->ep.caps.type_int = true;
+ }
+
+ if (epnum & 1)
+ hsep->ep.caps.dir_in = true;
+ else
+ hsep->ep.caps.dir_out = true;
+
set_index(hsudc, epnum);
writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR);
}
--
1.9.1

2015-07-15 06:37:04

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 31/46] usb: gadget: s3c2410_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/s3c2410_udc.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index 5d9aa81..eb3571e 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1691,6 +1691,8 @@ static struct s3c2410_udc memory = {
.name = ep0name,
.ops = &s3c2410_ep_ops,
.maxpacket = EP0_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
},
@@ -1702,6 +1704,8 @@ static struct s3c2410_udc memory = {
.name = "ep1-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
@@ -1714,6 +1718,8 @@ static struct s3c2410_udc memory = {
.name = "ep2-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
@@ -1726,6 +1732,8 @@ static struct s3c2410_udc memory = {
.name = "ep3-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
@@ -1738,6 +1746,8 @@ static struct s3c2410_udc memory = {
.name = "ep4-bulk",
.ops = &s3c2410_ep_ops,
.maxpacket = EP_FIFO_SIZE,
+ .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
},
.dev = &memory,
.fifo_size = EP_FIFO_SIZE,
--
1.9.1

2015-07-15 06:37:33

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 32/46] usb: gadget: udc-xilinx: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/udc-xilinx.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index 1f24274..1cbb0ac 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -1317,12 +1317,21 @@ static void xudc_eps_init(struct xusb_udc *udc)
snprintf(ep->name, EPNAME_SIZE, "ep%d", ep_number);
ep->ep_usb.name = ep->name;
ep->ep_usb.ops = &xusb_ep_ops;
+
+ ep->ep_usb.caps.type_iso = true;
+ ep->ep_usb.caps.type_bulk = true;
+ ep->ep_usb.caps.type_int = true;
} else {
ep->ep_usb.name = ep0name;
usb_ep_set_maxpacket_limit(&ep->ep_usb, EP0_MAX_PACKET);
ep->ep_usb.ops = &xusb_ep0_ops;
+
+ ep->ep_usb.caps.type_control = true;
}

+ ep->ep_usb.caps.dir_in = true;
+ ep->ep_usb.caps.dir_out = true;
+
ep->udc = udc;
ep->epnumber = ep_number;
ep->desc = NULL;
--
1.9.1

2015-07-15 06:37:16

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 33/46] usb: isp1760: udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/isp1760/isp1760-udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 3699962..1c3d0fd 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1383,13 +1383,24 @@ static void isp1760_udc_init_eps(struct isp1760_udc *udc)
*/
if (ep_num == 0) {
usb_ep_set_maxpacket_limit(&ep->ep, 64);
+ ep->ep.caps.type_control = true;
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
ep->maxpacket = 64;
udc->gadget.ep0 = &ep->ep;
} else {
usb_ep_set_maxpacket_limit(&ep->ep, 512);
+ ep->ep.caps.type_iso = true;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
ep->maxpacket = 0;
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
}
+
+ if (is_in)
+ ep->ep.caps.dir_in = true;
+ else
+ ep->ep.caps.dir_out = true;
}
}

--
1.9.1

2015-07-15 06:37:27

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 34/46] usb: musb: gadget: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/musb/musb_gadget.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 625d482f..043248a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1729,6 +1729,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
INIT_LIST_HEAD(&ep->end_point.ep_list);
if (!epnum) {
usb_ep_set_maxpacket_limit(&ep->end_point, 64);
+ ep->end_point.caps.type_control = true;
ep->end_point.ops = &musb_g_ep0_ops;
musb->g.ep0 = &ep->end_point;
} else {
@@ -1736,9 +1737,20 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx);
else
usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx);
+ ep->end_point.caps.type_iso = true;
+ ep->end_point.caps.type_bulk = true;
+ ep->end_point.caps.type_int = true;
ep->end_point.ops = &musb_ep_ops;
list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
}
+
+ if (!epnum || hw_ep->is_shared_fifo) {
+ ep->end_point.caps.dir_in = true;
+ ep->end_point.caps.dir_out = true;
+ } else if (is_in)
+ ep->end_point.caps.dir_in = true;
+ else
+ ep->end_point.caps.dir_out = true;
}

/*
--
1.9.1

2015-07-15 06:37:31

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 35/46] usb: renesas: gadget: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index dc2aa32..ed8d890 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1041,12 +1041,18 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
if (usbhsg_is_dcp(uep)) {
gpriv->gadget.ep0 = &uep->ep;
usb_ep_set_maxpacket_limit(&uep->ep, 64);
+ uep->ep.caps.type_control = true;
}
/* init normal pipe */
else {
usb_ep_set_maxpacket_limit(&uep->ep, 512);
+ uep->ep.caps.type_iso = true;
+ uep->ep.caps.type_bulk = true;
+ uep->ep.caps.type_int = true;
list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
}
+ uep->ep.caps.dir_in = true;
+ uep->ep.caps.dir_out = true;
}

ret = usb_add_gadget_udc(dev, &gpriv->gadget);
--
1.9.1

2015-07-15 06:38:09

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 36/46] usb: gadget: atmel_usba_udc: add ep capabilities support

Convert endpoint configuration to new capabilities model.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 37d414e..267d84f 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2067,6 +2067,17 @@ static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
ep->can_dma = pdata->ep[i].can_dma;
ep->can_isoc = pdata->ep[i].can_isoc;

+ if (i == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = ep->can_isoc;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
+
if (i)
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
}
--
1.9.1

2015-07-15 06:37:47

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 37/46] usb: gadget: epautoconf: add endpoint capabilities flags verification

Introduce endpoint matching mechanism basing on endpoint capabilities
flags. We check if endpoint supports transfer type and direction requested
in ep descriptor. Since we have this new endpoint matching mechanism
there is no need to have old code guessing endpoint capabilities basing
on its name, so we are getting rid of it. Remove also the obsolete comment.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 96 +++++++++++++----------------------------
1 file changed, 30 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 8e00ca7..af4b10a 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,22 +22,6 @@

#include "gadget_chips.h"

-/*
- * This should work with endpoints from controller drivers sharing the
- * same endpoint naming convention. By example:
- *
- * - ep1, ep2, ... address is fixed, not direction or type
- * - ep1in, ep2out, ... address and direction are fixed, not type
- * - ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
- * - ep1in-bulk, ep2out-iso, ... all three are fixed
- * - ep-* ... no functionality restrictions
- *
- * Type suffixes are "-bulk", "-iso", or "-int". Numbers are decimal.
- * Less common restrictions are implied by gadget_is_*().
- *
- * NOTE: each endpoint is unidirectional, as specified by its USB
- * descriptor; and isn't specific to a configuration or altsetting.
- */
static int
ep_matches (
struct usb_gadget *gadget,
@@ -47,7 +31,6 @@ ep_matches (
)
{
u8 type;
- const char *tmp;
u16 max;

int num_req_streams = 0;
@@ -56,58 +39,39 @@ ep_matches (
if (ep->claimed)
return 0;

- /* only support ep0 for portable CONTROL traffic */
type = usb_endpoint_type(desc);
- if (USB_ENDPOINT_XFER_CONTROL == type)
- return 0;
-
- /* some other naming convention */
- if ('e' != ep->name[0])
+ switch (type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* only support ep0 for portable CONTROL traffic */
return 0;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->caps.type_iso)
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (!ep->caps.type_bulk)
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* bulk endpoints handle interrupt transfers,
+ * except the toggle-quirky iso-synch kind
+ */
+ if (!ep->caps.type_int && !ep->caps.type_bulk)
+ return 0;
+ /* for now, avoid PXA "interrupt-in";
+ * it's documented as never using DATA1.
+ */
+ if (gadget_is_pxa(gadget) && ep->caps.type_int)
+ return 0;
+ break;
+ }

- /* type-restriction: "-iso", "-bulk", or "-int".
- * direction-restriction: "in", "out".
- */
- if ('-' != ep->name[2]) {
- tmp = strrchr (ep->name, '-');
- if (tmp) {
- switch (type) {
- case USB_ENDPOINT_XFER_INT:
- /* bulk endpoints handle interrupt transfers,
- * except the toggle-quirky iso-synch kind
- */
- if ('s' == tmp[2]) // == "-iso"
- return 0;
- /* for now, avoid PXA "interrupt-in";
- * it's documented as never using DATA1.
- */
- if (gadget_is_pxa (gadget)
- && 'i' == tmp [1])
- return 0;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if ('b' != tmp[1]) // != "-bulk"
- return 0;
- break;
- case USB_ENDPOINT_XFER_ISOC:
- if ('s' != tmp[2]) // != "-iso"
- return 0;
- }
- } else {
- tmp = ep->name + strlen (ep->name);
- }
-
- /* direction-restriction: "..in-..", "out-.." */
- tmp--;
- if (!isdigit (*tmp)) {
- if (desc->bEndpointAddress & USB_DIR_IN) {
- if ('n' != *tmp)
- return 0;
- } else {
- if ('t' != *tmp)
- return 0;
- }
- }
+ if (usb_endpoint_dir_in(desc)) {
+ if (!ep->caps.dir_in)
+ return 0;
+ } else {
+ if (!ep->caps.dir_out)
+ return 0;
}

/*
--
1.9.1

2015-07-15 06:37:58

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 38/46] usb: gadget: epautoconf: remove pxa quirk from ep_matches()

The same effect can be achieved by using capabilities flags, so now we can
get rid of handling of hardware specific limitations in generic code.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 5 -----
drivers/usb/gadget/udc/pxa25x_udc.c | 9 +++------
2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index af4b10a..4f66e9d73 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -58,11 +58,6 @@ ep_matches (
*/
if (!ep->caps.type_int && !ep->caps.type_bulk)
return 0;
- /* for now, avoid PXA "interrupt-in";
- * it's documented as never using DATA1.
- */
- if (gadget_is_pxa(gadget) && ep->caps.type_int)
- return 0;
break;
}

diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 1301e29..f53e526 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -1898,8 +1898,7 @@ static struct pxa25x_udc memory = {
.name = "ep5in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
- .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
- USB_EP_CAPS_DIR_IN),
+ .caps = USB_EP_CAPS(0, 0),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
@@ -1977,8 +1976,7 @@ static struct pxa25x_udc memory = {
.name = "ep10in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
- .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
- USB_EP_CAPS_DIR_IN),
+ .caps = USB_EP_CAPS(0, 0),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
@@ -2056,8 +2054,7 @@ static struct pxa25x_udc memory = {
.name = "ep15in-int",
.ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
- .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
- USB_EP_CAPS_DIR_IN),
+ .caps = USB_EP_CAPS(0, 0),
},
.dev = &memory,
.fifo_size = INT_FIFO_SIZE,
--
1.9.1

2015-07-15 06:38:19

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 39/46] usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()

As function ep_matches() is used to match endpoint with usb descriptor it's
highly unintuitive that it modifies endpoint and descriptor structures fields.
This patch moves code configuring ep and desc from ep_matches() to
usb_ep_autoconfig_ss(), so now function ep_matches() does nothing more than
its name suggests.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 66 +++++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 4f66e9d73..7bb28f1 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -82,13 +82,6 @@ ep_matches (

}

- /*
- * If the protocol driver hasn't yet decided on wMaxPacketSize
- * and wants to know the maximum possible, provide the info.
- */
- if (desc->wMaxPacketSize == 0)
- desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
-
/* endpoint maxpacket size is an input parameter, except for bulk
* where it's an output parameter representing the full speed limit.
* the usb spec fixes high speed bulk maxpacket at 512 bytes.
@@ -119,31 +112,6 @@ ep_matches (

/* MATCH!! */

- /* report address */
- desc->bEndpointAddress &= USB_DIR_IN;
- if (isdigit (ep->name [2])) {
- u8 num = simple_strtoul (&ep->name [2], NULL, 10);
- desc->bEndpointAddress |= num;
- } else if (desc->bEndpointAddress & USB_DIR_IN) {
- if (++gadget->in_epnum > 15)
- return 0;
- desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
- } else {
- if (++gadget->out_epnum > 15)
- return 0;
- desc->bEndpointAddress |= gadget->out_epnum;
- }
-
- /* report (variable) full speed bulk maxpacket */
- if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
- int size = ep->maxpacket_limit;
-
- /* min() doesn't work on bitfields with gcc-3.5 */
- if (size > 64)
- size = 64;
- desc->wMaxPacketSize = cpu_to_le16(size);
- }
- ep->address = desc->bEndpointAddress;
return 1;
}

@@ -280,6 +248,40 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* Fail */
return NULL;
found_ep:
+
+ /*
+ * If the protocol driver hasn't yet decided on wMaxPacketSize
+ * and wants to know the maximum possible, provide the info.
+ */
+ if (desc->wMaxPacketSize == 0)
+ desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
+
+ /* report address */
+ desc->bEndpointAddress &= USB_DIR_IN;
+ if (isdigit(ep->name[2])) {
+ u8 num = simple_strtoul(&ep->name[2], NULL, 10);
+ desc->bEndpointAddress |= num;
+ } else if (desc->bEndpointAddress & USB_DIR_IN) {
+ if (++gadget->in_epnum > 15)
+ return 0;
+ desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
+ } else {
+ if (++gadget->out_epnum > 15)
+ return 0;
+ desc->bEndpointAddress |= gadget->out_epnum;
+ }
+
+ /* report (variable) full speed bulk maxpacket */
+ if ((type == USB_ENDPOINT_XFER_BULK) && !ep_comp) {
+ int size = ep->maxpacket_limit;
+
+ /* min() doesn't work on bitfields with gcc-3.5 */
+ if (size > 64)
+ size = 64;
+ desc->wMaxPacketSize = cpu_to_le16(size);
+ }
+
+ ep->address = desc->bEndpointAddress;
ep->desc = NULL;
ep->comp_desc = NULL;
ep->claimed = true;
--
1.9.1

2015-07-15 06:38:07

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 40/46] usb: gadget: epautoconf: rework ep_matches() function

Rework ep_matches() function to make it shorter and more readable.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 87 +++++++++++++++++------------------------
1 file changed, 35 insertions(+), 52 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7bb28f1..4fa6f5d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -30,16 +30,29 @@ ep_matches (
struct usb_ss_ep_comp_descriptor *ep_comp
)
{
- u8 type;
- u16 max;
-
- int num_req_streams = 0;
+ u8 type;
+ u16 max;
+ int num_req_streams = 0;

/* endpoint already claimed? */
if (ep->claimed)
return 0;

type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ else if (!ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
switch (type) {
case USB_ENDPOINT_XFER_CONTROL:
/* only support ep0 for portable CONTROL traffic */
@@ -47,66 +60,36 @@ ep_matches (
case USB_ENDPOINT_XFER_ISOC:
if (!ep->caps.type_iso)
return 0;
+ /* ISO: limit 1023 bytes full speed,
+ * 1024 high/super speed
+ */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
break;
case USB_ENDPOINT_XFER_BULK:
if (!ep->caps.type_bulk)
return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
break;
case USB_ENDPOINT_XFER_INT:
- /* bulk endpoints handle interrupt transfers,
+ /* Bulk endpoints handle interrupt transfers,
* except the toggle-quirky iso-synch kind
*/
if (!ep->caps.type_int && !ep->caps.type_bulk)
return 0;
- break;
- }
-
- if (usb_endpoint_dir_in(desc)) {
- if (!ep->caps.dir_in)
- return 0;
- } else {
- if (!ep->caps.dir_out)
- return 0;
- }
-
- /*
- * Get the number of required streams from the EP companion
- * descriptor and see if the EP matches it
- */
- if (usb_endpoint_xfer_bulk(desc)) {
- if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
-
- }
-
- /* endpoint maxpacket size is an input parameter, except for bulk
- * where it's an output parameter representing the full speed limit.
- * the usb spec fixes high speed bulk maxpacket at 512 bytes.
- */
- max = 0x7ff & usb_endpoint_maxp(desc);
- switch (type) {
- case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ /* INT: limit 64 bytes full speed,
+ * 1024 high/super speed
+ */
if (!gadget_is_dualspeed(gadget) && max > 64)
return 0;
- /* FALLTHROUGH */
-
- case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
- if (ep->maxpacket_limit < max)
- return 0;
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
-
- /* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
- if (!gadget_is_dualspeed(gadget))
- return 0;
- /* configure your hardware with enough buffering!! */
- }
break;
}

--
1.9.1

2015-07-15 06:38:16

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 41/46] usb: gadget: add 'ep_match' callback to usb_gadget_ops

Add callback that is called by epautoconf to allow UDC driver match the
best endpoint for specific descriptor. It's intended to supply mechanism
which allows to get rid of chip-specific endpoint matching code from
epautoconf.

If gadget has set 'ep_match' callback we prefer to call it first, and
if it fails to find matching endpoint, then we try to use default matching
algorithm.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 6 ++++++
include/linux/usb/gadget.h | 3 +++
2 files changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 4fa6f5d..1b1fee0 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -165,6 +165,12 @@ struct usb_ep *usb_ep_autoconfig_ss(

type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;

+ if (gadget->ops->match_ep) {
+ ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+ if (ep)
+ goto found_ep;
+ }
+
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e6cbc25..0041bb9 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -534,6 +534,9 @@ struct usb_gadget_ops {
int (*udc_start)(struct usb_gadget *,
struct usb_gadget_driver *);
int (*udc_stop)(struct usb_gadget *);
+ struct usb_ep *(*match_ep)(struct usb_gadget *,
+ struct usb_endpoint_descriptor *,
+ struct usb_ss_ep_comp_descriptor *);
};

/**
--
1.9.1

2015-07-15 06:38:26

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 42/46] usb: gadget: move ep_matches() from epautoconf to udc-core

Move ep_matches() function to udc-core and rename it to
usb_gadget_ep_match_desc(). This function can be used by UDC drivers
in 'match_ep' callback to avoid writing lots of repetitive code.

Replace all calls of ep_matches() with usb_gadget_ep_match_desc().

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 95 +++++----------------------------------
drivers/usb/gadget/udc/udc-core.c | 69 ++++++++++++++++++++++++++++
include/linux/usb/gadget.h | 8 ++++
3 files changed, 88 insertions(+), 84 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 1b1fee0..3f0a380 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,82 +22,6 @@

#include "gadget_chips.h"

-static int
-ep_matches (
- struct usb_gadget *gadget,
- struct usb_ep *ep,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
- u8 type;
- u16 max;
- int num_req_streams = 0;
-
- /* endpoint already claimed? */
- if (ep->claimed)
- return 0;
-
- type = usb_endpoint_type(desc);
- max = 0x7ff & usb_endpoint_maxp(desc);
-
- if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
- return 0;
- else if (!ep->caps.dir_out)
- return 0;
-
- if (max > ep->maxpacket_limit)
- return 0;
-
- /* "high bandwidth" works only at high speed */
- if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
- return 0;
-
- switch (type) {
- case USB_ENDPOINT_XFER_CONTROL:
- /* only support ep0 for portable CONTROL traffic */
- return 0;
- case USB_ENDPOINT_XFER_ISOC:
- if (!ep->caps.type_iso)
- return 0;
- /* ISO: limit 1023 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (!ep->caps.type_bulk)
- return 0;
- if (ep_comp && gadget_is_superspeed(gadget)) {
- /* Get the number of required streams from the
- * EP companion descriptor and see if the EP
- * matches it
- */
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- /* Bulk endpoints handle interrupt transfers,
- * except the toggle-quirky iso-synch kind
- */
- if (!ep->caps.type_int && !ep->caps.type_bulk)
- return 0;
- /* INT: limit 64 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 64)
- return 0;
- break;
- }
-
- /* MATCH!! */
-
- return 1;
-}
-
static struct usb_ep *
find_ep (struct usb_gadget *gadget, const char *name)
{
@@ -180,10 +104,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep(gadget, "ep-e");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
ep = find_ep(gadget, "ep-f");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}

@@ -191,20 +117,21 @@ struct usb_ep *usb_ep_autoconfig_ss(
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
ep = find_ep(gadget, name);
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = find_ep(gadget, "ep3-bulk");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
ep = find_ep(gadget, "ep2-bulk");
- if (ep && ep_matches(gadget, ep, desc,
- ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}

@@ -223,14 +150,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep = find_ep(gadget, "ep2out");
} else
ep = NULL;
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
#endif
}

/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches(gadget, ep, desc, ep_comp))
+ if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
}

diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index d69c355..2dff8df 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -129,6 +129,75 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);

/* ------------------------------------------------------------------------- */

+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ u8 type;
+ u16 max;
+ int num_req_streams = 0;
+
+ /* endpoint already claimed? */
+ if (ep->claimed)
+ return 0;
+
+ type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ else if (!ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
+ switch (type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* only support ep0 for portable CONTROL traffic */
+ return 0;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->caps.type_iso)
+ return 0;
+ /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (!ep->caps.type_bulk)
+ return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* Bulk endpoints handle interrupt transfers,
+ * except the toggle-quirky iso-synch kind
+ */
+ if (!ep->caps.type_int && !ep->caps.type_bulk)
+ return 0;
+ /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 64)
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
static void usb_gadget_state_work(struct work_struct *work)
{
struct usb_gadget *gadget = work_to_gadget(work);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 0041bb9..77e2c1e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1079,6 +1079,14 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,

/*-------------------------------------------------------------------------*/

+/* utility to check if endpoint caps match descriptor needs */
+
+extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp);
+
+/*-------------------------------------------------------------------------*/
+
/* utility to update vbus status for udc core, it may be scheduled */
extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);

--
1.9.1

2015-07-15 06:39:57

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 43/46] usb: gadget: move find_ep() from epautoconf to gadget.h

Move find_ep() function to gadget.h, rename it to gadget_find_ep_by_name()
and make it static inline. It can be used in UDC drivers, especially in
'match_ep' callback after moving chip-specific endpoint matching logic from
epautoconf to UDC drivers.

Replace all calls of find_ep() function with gadget_find_ep_by_name().

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 30 +++++++++---------------------
include/linux/usb/gadget.h | 18 ++++++++++++++++++
2 files changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 3f0a380..cc0b084 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,18 +22,6 @@

#include "gadget_chips.h"

-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
- struct usb_ep *ep;
-
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (0 == strcmp (ep->name, name))
- return ep;
- }
- return NULL;
-}
-
/**
* usb_ep_autoconfig_ss() - choose an endpoint matching the ep
* descriptor and ep companion descriptor
@@ -103,11 +91,11 @@ struct usb_ep *usb_ep_autoconfig_ss(

if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep(gadget, "ep-e");
+ ep = gadget_find_ep_by_name(gadget, "ep-e");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
- ep = find_ep(gadget, "ep-f");
+ ep = gadget_find_ep_by_name(gadget, "ep-f");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
@@ -116,20 +104,20 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* USB3380: use same address for usb and hardware endpoints */
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
- ep = find_ep(gadget, name);
+ ep = gadget_find_ep_by_name(gadget, name);
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
- ep = find_ep(gadget, "ep3-bulk");
+ ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
- ep = find_ep(gadget, "ep2-bulk");
+ ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
@@ -140,14 +128,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
if ((USB_ENDPOINT_XFER_BULK == type) ||
(USB_ENDPOINT_XFER_ISOC == type)) {
if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep (gadget, "ep5in");
+ ep = gadget_find_ep_by_name(gadget, "ep5in");
else
- ep = find_ep (gadget, "ep6out");
+ ep = gadget_find_ep_by_name(gadget, "ep6out");
} else if (USB_ENDPOINT_XFER_INT == type) {
if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep(gadget, "ep1in");
+ ep = gadget_find_ep_by_name(gadget, "ep1in");
else
- ep = find_ep(gadget, "ep2out");
+ ep = gadget_find_ep_by_name(gadget, "ep2out");
} else
ep = NULL;
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 77e2c1e..42e951b 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -629,6 +629,24 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
#define gadget_for_each_ep(tmp, gadget) \
list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)

+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ * in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+static inline struct usb_ep *
+gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+ struct usb_ep *ep;
+
+ gadget_for_each_ep(ep, g) {
+ if (!strcmp(ep->name, name))
+ return ep;
+ }
+
+ return NULL;
+}

/**
* usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
--
1.9.1

2015-07-15 06:38:43

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 44/46] usb: gadget: net2280: add net2280_match_ep() function

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 23 +----------------------
drivers/usb/gadget/udc/net2280.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index cc0b084..d41fd82 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,28 +86,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280(gadget)) {
- char name[8];
-
- if (type == USB_ENDPOINT_XFER_INT) {
- /* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = gadget_find_ep_by_name(gadget, "ep-e");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- ep = gadget_find_ep_by_name(gadget, "ep-f");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- }
-
- /* USB3380: use same address for usb and hardware endpoints */
- snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
- usb_endpoint_dir_in(desc) ? "in" : "out");
- ep = gadget_find_ep_by_name(gadget, name);
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- } else if (gadget_is_goku (gadget)) {
+ if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 0295cf7..41e6568 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1533,6 +1533,36 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
return 0;
}

+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ char name[8];
+ struct usb_ep *ep;
+ u8 type;
+
+ type = usb_endpoint_type(desc);
+
+ if (type == USB_ENDPOINT_XFER_INT) {
+ /* ep-e, ep-f are PIO with only 64 byte fifos */
+ ep = gadget_find_ep_by_name(_gadget, "ep-e");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep-f");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ }
+
+ /* USB3380: use same address for usb and hardware endpoints */
+ snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+ usb_endpoint_dir_in(desc) ? "in" : "out");
+ ep = gadget_find_ep_by_name(_gadget, name);
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+
static int net2280_start(struct usb_gadget *_gadget,
struct usb_gadget_driver *driver);
static int net2280_stop(struct usb_gadget *_gadget);
@@ -1544,6 +1574,7 @@ static const struct usb_gadget_ops net2280_ops = {
.pullup = net2280_pullup,
.udc_start = net2280_start,
.udc_stop = net2280_stop,
+ .match_ep = net2280_match_ep,
};

/*-------------------------------------------------------------------------*/
--
1.9.1

2015-07-15 06:38:41

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 45/46] usb: gadget: goku_udc: add goku_match_ep() function

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 20 ++------------------
drivers/usb/gadget/udc/goku_udc.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index d41fd82..da45371 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,24 +86,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_goku (gadget)) {
- if (USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough */
- ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- } else if (USB_ENDPOINT_XFER_BULK == type
- && (USB_DIR_IN & desc->bEndpointAddress)) {
- /* DMA may be available */
- ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- }
-
#ifdef CONFIG_BLACKFIN
- } else if (gadget_is_musbhdrc(gadget)) {
+ if (gadget_is_musbhdrc(gadget)) {
if ((USB_ENDPOINT_XFER_BULK == type) ||
(USB_ENDPOINT_XFER_ISOC == type)) {
if (USB_DIR_IN & desc->bEndpointAddress)
@@ -119,8 +103,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep = NULL;
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
-#endif
}
+#endif

/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 46b8d14..d5a93ea 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -990,6 +990,30 @@ static int goku_get_frame(struct usb_gadget *_gadget)
return -EOPNOTSUPP;
}

+static struct usb_ep *goku_match_ep(struct usb_gadget *g,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ struct goku_udc *dev = to_goku_udc(g);
+ struct usb_ep *ep;
+ u8 type = usb_endpoint_type(desc);
+
+ if (type == USB_ENDPOINT_XFER_INT) {
+ /* single buffering is enough */
+ ep = &dev->ep[3].ep;
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+ } else if (type == USB_ENDPOINT_XFER_BULK
+ && usb_endpoint_dir_in(desc)) {
+ /* DMA may be available */
+ ep = &dev->ep[2].ep;
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+ }
+
+ return NULL;
+}
+
static int goku_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int goku_udc_stop(struct usb_gadget *g);
@@ -998,6 +1022,7 @@ static const struct usb_gadget_ops goku_ops = {
.get_frame = goku_get_frame,
.udc_start = goku_udc_start,
.udc_stop = goku_udc_stop,
+ .match_ep = goku_match_ep,
// no remote wakeup
// not selfpowered
};
--
1.9.1

2015-07-15 06:38:50

by Robert Baldyga

[permalink] [raw]
Subject: [PATCH v3 46/46] usb: musb: gadget: add musb_match_ep() function

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 23 -----------------------
drivers/usb/musb/musb_gadget.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index da45371..254ece7 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -83,29 +83,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
goto found_ep;
}

- /* First, apply chip-specific "best usage" knowledge.
- * This might make a good usb_gadget_ops hook ...
- */
-#ifdef CONFIG_BLACKFIN
- if (gadget_is_musbhdrc(gadget)) {
- if ((USB_ENDPOINT_XFER_BULK == type) ||
- (USB_ENDPOINT_XFER_ISOC == type)) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep5in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep6out");
- } else if (USB_ENDPOINT_XFER_INT == type) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep1in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep2out");
- } else
- ep = NULL;
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- }
-#endif
-
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 043248a..3a64cf2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,6 +1684,39 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}

+#ifdef CONFIG_BLACKFIN
+static struct usb_ep *musb_match_ep(struct usb_gadget *g,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ struct usb_ep *ep = NULL;
+ u8 type = usb_endpoint_type(desc);
+
+ switch(type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ case USB_ENDPOINT_XFER_BULK:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep5in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep6out");
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep1in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep2out");
+ default:
+ }
+
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+#else
+#define musb_match_ep NULL
+#endif
+
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
@@ -1697,6 +1730,7 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
+ .match_ep = musb_match_ep,
};

/* ----------------------------------------------------------------------- */
--
1.9.1

2015-07-20 14:43:29

by Krzysztof Opasiak

[permalink] [raw]
Subject: Re: [PATCH v3 01/46] usb: gadget: encapsulate endpoint claiming mechanism



On 07/15/2015 08:31 AM, Robert Baldyga wrote:
> So far it was necessary for usb functions to set ep->driver_data in
> endpoint obtained from autoconfig to non-null value, to indicate that
> endpoint is claimed by function (in autoconfig it was checked if endpoint
> has set this field to non-null value, and if it has, it was assumed that
> it is claimed). It could cause bugs becouse if some function doesn't

s/becouse/because

Best regards,
--
Krzysztof Opasiak
Samsung R&D Institute Poland
Samsung Electronics

2015-07-20 15:08:20

by Krzysztof Opasiak

[permalink] [raw]
Subject: Re: [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support



On 07/15/2015 08:32 AM, Robert Baldyga wrote:
> Convert endpoint configuration to new capabilities model.
>
> Signed-off-by: Robert Baldyga <[email protected]>
> ---
> drivers/usb/gadget/udc/pch_udc.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
> index 613547f..cc8fb3c 100644
> --- a/drivers/usb/gadget/udc/pch_udc.c
> +++ b/drivers/usb/gadget/udc/pch_udc.c
> @@ -2895,11 +2895,21 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
> ep->in = ~i & 1;
> ep->ep.name = ep_string[i];
> ep->ep.ops = &pch_udc_ep_ops;
> - if (ep->in)
> + if (ep->in) {
> ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
> - else
> + ep->ep.caps.dir_in = true;
> + } else {
> ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
> UDC_EP_REG_SHIFT;
> + ep->ep.caps.dir_out = true;
> + }
> + if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
> + ep->ep.caps.type_control = true;

In all previous patches you set both dir_in and dir_out to true for ep0
but in this patch you don't do this. Is there some reason for this or
it's just a mistake?

> + } else {
> + ep->ep.caps.type_iso = true;
> + ep->ep.caps.type_bulk = true;
> + ep->ep.caps.type_int = true;
> + }
> /* need to set ep->ep.maxpacket and set Default Configuration?*/
> usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
> list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
>

Best Regards,

--
Krzysztof Opasiak
Samsung R&D Institute Poland
Samsung Electronics

2015-07-21 16:44:22

by Felipe Balbi

[permalink] [raw]
Subject: Re: [PATCH v3 07/46] usb: dwc3: gadget: add ep capabilities support

Hi,

On Wed, Jul 15, 2015 at 08:31:54AM +0200, Robert Baldyga wrote:
> Convert endpoint configuration to new capabilities model.
>
> Signed-off-by: Robert Baldyga <[email protected]>
> ---
> drivers/usb/dwc3/gadget.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 333a7c0..8d1f768 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1713,6 +1713,19 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
> return ret;
> }
>
> + if (epnum == 0) {
> + dep->endpoint.caps.type_control = true;

as the name says, this function deals with hw endpoints. This means ep1
is also control.

--
balbi


Attachments:
(No filename) (734.00 B)
signature.asc (819.00 B)
Digital signature
Download all attachments

2015-07-25 09:34:54

by Robert Baldyga

[permalink] [raw]
Subject: Re: [PATCH v3 26/46] usb: gadget: pch_ud: add ep capabilities support

Hi,

On 07/20/2015 05:08 PM, Krzysztof Opasiak wrote:
>
>
> On 07/15/2015 08:32 AM, Robert Baldyga wrote:
>> Convert endpoint configuration to new capabilities model.
>>
>> Signed-off-by: Robert Baldyga <[email protected]>
>> ---
>> drivers/usb/gadget/udc/pch_udc.c | 14 ++++++++++++--
>> 1 file changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/udc/pch_udc.c
>> b/drivers/usb/gadget/udc/pch_udc.c
>> index 613547f..cc8fb3c 100644
>> --- a/drivers/usb/gadget/udc/pch_udc.c
>> +++ b/drivers/usb/gadget/udc/pch_udc.c
>> @@ -2895,11 +2895,21 @@ static void pch_udc_pcd_reinit(struct
>> pch_udc_dev *dev)
>> ep->in = ~i & 1;
>> ep->ep.name = ep_string[i];
>> ep->ep.ops = &pch_udc_ep_ops;
>> - if (ep->in)
>> + if (ep->in) {
>> ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
>> - else
>> + ep->ep.caps.dir_in = true;
>> + } else {
>> ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
>> UDC_EP_REG_SHIFT;
>> + ep->ep.caps.dir_out = true;
>> + }
>> + if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
>> + ep->ep.caps.type_control = true;
>
> In all previous patches you set both dir_in and dir_out to true for ep0
> but in this patch you don't do this. Is there some reason for this or
> it's just a mistake?
>

Most of UDC drivers we have single instance of ep0 for both directions,
but this one has two separate unidirectional ep0in and ep0out.

>> + } else {
>> + ep->ep.caps.type_iso = true;
>> + ep->ep.caps.type_bulk = true;
>> + ep->ep.caps.type_int = true;
>> + }
>> /* need to set ep->ep.maxpacket and set Default
>> Configuration?*/
>> usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
>> list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
>>
>

Thanks,
Robert Baldyga