The shared 'platform' driver module isn't needed, the platform drivers
can directly register with crypto instead. It only adds unneeded
complexity and problems.
The first 4 patches are minor updates/bugfixes to the pSeries driver.
The 5th patch is a minor update to the NX crypto driver.
The last 3 patches merge the crypto and common code driver, and move
the crypto compression driver registration into the platform (pSeries
and PowerNV) drivers. Both platform drivers use the same alg name and
driver name when registering, but since only one (at most) will register
on a system, depending on the platform, their registration will not
conflict.
Dan Streetman (8):
crypto: nx - remove __init/__exit from VIO functions
crypto: nx - remove pSeries NX 'status' field
crypto: nx - move kzalloc() out of spinlock
crypto: nx - don't register pSeries driver if ENODEV
crypto: nx - use common code for both NX decompress success cases
crypto: nx - merge nx-compress and nx-compress-crypto
crypto: nx - rename nx-842-crypto.c to nx-842.c
crypto: nx - make platform drivers directly register with crypto
drivers/crypto/nx/Kconfig | 17 +-
drivers/crypto/nx/Makefile | 8 +-
drivers/crypto/nx/nx-842-crypto.c | 602 ------------------------------------
drivers/crypto/nx/nx-842-platform.c | 84 -----
drivers/crypto/nx/nx-842-powernv.c | 29 +-
drivers/crypto/nx/nx-842-pseries.c | 126 ++++----
drivers/crypto/nx/nx-842.c | 554 +++++++++++++++++++++++++++++----
drivers/crypto/nx/nx-842.h | 65 +++-
8 files changed, 638 insertions(+), 847 deletions(-)
delete mode 100644 drivers/crypto/nx/nx-842-crypto.c
delete mode 100644 drivers/crypto/nx/nx-842-platform.c
--
2.1.0
Remove the __init and __exit modifiers from the VIO driver probe and
remove functions.
The driver functions should not be marked __init/__exit because they
can/will be called during runtime, not only at module init and exit.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index d44524d..fc59520 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -977,8 +977,8 @@ static struct nx842_driver nx842_pseries_driver = {
.decompress = nx842_pseries_decompress,
};
-static int __init nx842_probe(struct vio_dev *viodev,
- const struct vio_device_id *id)
+static int nx842_probe(struct vio_dev *viodev,
+ const struct vio_device_id *id)
{
struct nx842_devdata *old_devdata, *new_devdata = NULL;
unsigned long flags;
@@ -1050,7 +1050,7 @@ error:
return ret;
}
-static int __exit nx842_remove(struct vio_dev *viodev)
+static int nx842_remove(struct vio_dev *viodev)
{
struct nx842_devdata *old_devdata;
unsigned long flags;
@@ -1081,7 +1081,7 @@ static struct vio_device_id nx842_vio_driver_ids[] = {
static struct vio_driver nx842_vio_driver = {
.name = KBUILD_MODNAME,
.probe = nx842_probe,
- .remove = __exit_p(nx842_remove),
+ .remove = nx842_remove,
.get_desired_dma = nx842_get_desired_dma,
.id_table = nx842_vio_driver_ids,
};
--
2.1.0
Remove the 'status' field from the pSeries NX driver data.
The 'status' field isn't used by the driver at all; it simply checks the
devicetree status node at initialization, and returns success if 'okay'
and failure otherwise.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 39 ++++++++++----------------------------
1 file changed, 10 insertions(+), 29 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index fc59520..b375877 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -99,11 +99,6 @@ struct nx842_workmem {
#define NX842_HW_PAGE_SIZE (4096)
#define NX842_HW_PAGE_MASK (~(NX842_HW_PAGE_SIZE-1))
-enum nx842_status {
- UNAVAILABLE,
- AVAILABLE
-};
-
struct ibm_nx842_counters {
atomic64_t comp_complete;
atomic64_t comp_failed;
@@ -121,7 +116,6 @@ static struct nx842_devdata {
unsigned int max_sg_len;
unsigned int max_sync_size;
unsigned int max_sync_sg;
- enum nx842_status status;
} __rcu *devdata;
static DEFINE_SPINLOCK(devdata_mutex);
@@ -537,48 +531,36 @@ static int nx842_OF_set_defaults(struct nx842_devdata *devdata)
devdata->max_sync_size = 0;
devdata->max_sync_sg = 0;
devdata->max_sg_len = 0;
- devdata->status = UNAVAILABLE;
return 0;
} else
return -ENOENT;
}
/**
- * nx842_OF_upd_status -- Update the device info from OF status prop
+ * nx842_OF_upd_status -- Check the device info from OF status prop
*
* The status property indicates if the accelerator is enabled. If the
* device is in the OF tree it indicates that the hardware is present.
* The status field indicates if the device is enabled when the status
* is 'okay'. Otherwise the device driver will be disabled.
*
- * @devdata - struct nx842_devdata to update
* @prop - struct property point containing the maxsyncop for the update
*
* Returns:
* 0 - Device is available
* -ENODEV - Device is not available
*/
-static int nx842_OF_upd_status(struct nx842_devdata *devdata,
- struct property *prop) {
- int ret = 0;
+static int nx842_OF_upd_status(struct property *prop)
+{
const char *status = (const char *)prop->value;
- if (!strncmp(status, "okay", (size_t)prop->length)) {
- devdata->status = AVAILABLE;
- } else {
- /*
- * Caller will log that the device is disabled, so only
- * output if there is an unexpected status.
- */
- if (strncmp(status, "disabled", (size_t)prop->length)) {
- dev_info(devdata->dev, "%s: status '%s' is not 'okay'\n",
- __func__, status);
- }
- devdata->status = UNAVAILABLE;
- ret = -ENODEV;
- }
+ if (!strncmp(status, "okay", (size_t)prop->length))
+ return 0;
+ if (!strncmp(status, "disabled", (size_t)prop->length))
+ return -ENODEV;
+ dev_info(devdata->dev, "%s: unknown status '%s'\n", __func__, status);
- return ret;
+ return -EINVAL;
}
/**
@@ -784,7 +766,7 @@ static int nx842_OF_upd(struct property *new_prop)
goto out;
/* Perform property updates */
- ret = nx842_OF_upd_status(new_devdata, status);
+ ret = nx842_OF_upd_status(status);
if (ret)
goto error_out;
@@ -1100,7 +1082,6 @@ static int __init nx842_pseries_init(void)
pr_err("Could not allocate memory for device data\n");
return -ENOMEM;
}
- new_devdata->status = UNAVAILABLE;
RCU_INIT_POINTER(devdata, new_devdata);
ret = vio_register_driver(&nx842_vio_driver);
--
2.1.0
Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top
of the functions, before taking the devdata spinlock.
Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while
holding a spinlock. Move the calls to before taking the lock.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 38 ++++++++++++++++----------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index b375877..74c53a1 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -724,6 +724,10 @@ static int nx842_OF_upd(struct property *new_prop)
int ret = 0;
unsigned long flags;
+ new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS);
+ if (!new_devdata)
+ return -ENOMEM;
+
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
@@ -733,16 +737,10 @@ static int nx842_OF_upd(struct property *new_prop)
if (!old_devdata || !of_node) {
pr_err("%s: device is not available\n", __func__);
spin_unlock_irqrestore(&devdata_mutex, flags);
+ kfree(new_devdata);
return -ENODEV;
}
- new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS);
- if (!new_devdata) {
- dev_err(old_devdata->dev, "%s: Could not allocate memory for device data\n", __func__);
- ret = -ENOMEM;
- goto error_out;
- }
-
memcpy(new_devdata, old_devdata, sizeof(*old_devdata));
new_devdata->counters = old_devdata->counters;
@@ -966,6 +964,17 @@ static int nx842_probe(struct vio_dev *viodev,
unsigned long flags;
int ret = 0;
+ new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS);
+ if (!new_devdata)
+ return -ENOMEM;
+
+ new_devdata->counters = kzalloc(sizeof(*new_devdata->counters),
+ GFP_NOFS);
+ if (!new_devdata->counters) {
+ kfree(new_devdata);
+ return -ENOMEM;
+ }
+
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
@@ -978,21 +987,6 @@ static int nx842_probe(struct vio_dev *viodev,
dev_set_drvdata(&viodev->dev, NULL);
- new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS);
- if (!new_devdata) {
- dev_err(&viodev->dev, "%s: Could not allocate memory for device data\n", __func__);
- ret = -ENOMEM;
- goto error_unlock;
- }
-
- new_devdata->counters = kzalloc(sizeof(*new_devdata->counters),
- GFP_NOFS);
- if (!new_devdata->counters) {
- dev_err(&viodev->dev, "%s: Could not allocate memory for performance counters\n", __func__);
- ret = -ENOMEM;
- goto error_unlock;
- }
-
new_devdata->vdev = viodev;
new_devdata->dev = &viodev->dev;
nx842_OF_set_defaults(new_devdata);
--
2.1.0
Don't register the pSeries driver when parsing the device tree returns
ENODEV.
The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned. However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index 74c53a1..4b7bd8f 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -999,11 +999,8 @@ static int nx842_probe(struct vio_dev *viodev,
of_reconfig_notifier_register(&nx842_of_nb);
ret = nx842_OF_upd(NULL);
- if (ret && ret != -ENODEV) {
- dev_err(&viodev->dev, "could not parse device tree. %d\n", ret);
- ret = -1;
+ if (ret)
goto error;
- }
rcu_read_lock();
dev_set_drvdata(&viodev->dev, rcu_dereference(devdata));
--
2.1.0
Replace the duplicated finishing code (set destination buffer length and
set return code to 0) in the case of decompressing a buffer with no header
with a goto to the success case of decompressing a buffer with a header.
This is a trivial change that allows both success cases to use common code,
and includes the pr_debug() msg in both cases as well.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/nx-842-crypto.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-crypto.c b/drivers/crypto/nx/nx-842-crypto.c
index 3288a70..51ca168 100644
--- a/drivers/crypto/nx/nx-842-crypto.c
+++ b/drivers/crypto/nx/nx-842-crypto.c
@@ -520,10 +520,7 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
if (ret)
goto unlock;
- *dlen = p.ototal;
-
- ret = 0;
- goto unlock;
+ goto success;
}
if (!hdr->groups) {
@@ -557,6 +554,7 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
goto unlock;
}
+success:
*dlen = p.ototal;
pr_debug("decompress total slen %x dlen %x\n", slen, *dlen);
--
2.1.0
Merge the nx-842.c code into nx-842-crypto.c.
This allows later patches to remove the 'platform' driver, and instead
allow each platform driver to directly register with the crypto
compression api.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/Kconfig | 17 ++-----
drivers/crypto/nx/Makefile | 4 +-
drivers/crypto/nx/nx-842-crypto.c | 70 +++++++++++++-------------
drivers/crypto/nx/nx-842.c | 103 --------------------------------------
drivers/crypto/nx/nx-842.h | 28 +++++++----
5 files changed, 60 insertions(+), 162 deletions(-)
delete mode 100644 drivers/crypto/nx/nx-842.c
diff --git a/drivers/crypto/nx/Kconfig b/drivers/crypto/nx/Kconfig
index e421c96..ad7552a 100644
--- a/drivers/crypto/nx/Kconfig
+++ b/drivers/crypto/nx/Kconfig
@@ -14,11 +14,14 @@ config CRYPTO_DEV_NX_ENCRYPT
config CRYPTO_DEV_NX_COMPRESS
tristate "Compression acceleration support"
default y
+ select CRYPTO_ALGAPI
+ select 842_DECOMPRESS
help
Support for PowerPC Nest (NX) compression acceleration. This
module supports acceleration for compressing memory with the 842
- algorithm. One of the platform drivers must be selected also.
- If you choose 'M' here, this module will be called nx_compress.
+ algorithm using the cryptographic API. One of the platform
+ drivers must be selected also. If you choose 'M' here, this
+ module will be called nx_compress.
if CRYPTO_DEV_NX_COMPRESS
@@ -42,14 +45,4 @@ config CRYPTO_DEV_NX_COMPRESS_POWERNV
algorithm. This supports NX hardware on the PowerNV platform.
If you choose 'M' here, this module will be called nx_compress_powernv.
-config CRYPTO_DEV_NX_COMPRESS_CRYPTO
- tristate "Compression acceleration cryptographic interface"
- select CRYPTO_ALGAPI
- select 842_DECOMPRESS
- default y
- help
- Support for PowerPC Nest (NX) accelerators using the cryptographic
- API. If you choose 'M' here, this module will be called
- nx_compress_crypto.
-
endif
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index e1684f5..e29ee85 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -13,9 +13,7 @@ nx-crypto-objs := nx.o \
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS) += nx-compress.o nx-compress-platform.o
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o
-obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_CRYPTO) += nx-compress-crypto.o
-nx-compress-objs := nx-842.o
+nx-compress-objs := nx-842-crypto.o
nx-compress-platform-objs := nx-842-platform.o
nx-compress-pseries-objs := nx-842-pseries.o
nx-compress-powernv-objs := nx-842-powernv.o
-nx-compress-crypto-objs := nx-842-crypto.o
diff --git a/drivers/crypto/nx/nx-842-crypto.c b/drivers/crypto/nx/nx-842-crypto.c
index 51ca168..4472e20 100644
--- a/drivers/crypto/nx/nx-842-crypto.c
+++ b/drivers/crypto/nx/nx-842-crypto.c
@@ -13,6 +13,9 @@
*
* Copyright (C) IBM Corporation, 2011-2015
*
+ * Designer of the Power data compression engine:
+ * Bulent Abali <[email protected]>
+ *
* Original Authors: Robert Jennings <[email protected]>
* Seth Jennings <[email protected]>
*
@@ -162,24 +165,11 @@ static void nx842_crypto_exit(struct crypto_tfm *tfm)
free_page((unsigned long)ctx->dbounce);
}
-static int read_constraints(struct nx842_constraints *c)
+static void check_constraints(struct nx842_constraints *c)
{
- int ret;
-
- ret = nx842_constraints(c);
- if (ret) {
- pr_err_ratelimited("could not get nx842 constraints : %d\n",
- ret);
- return ret;
- }
-
/* limit maximum, to always have enough bounce buffer to decompress */
- if (c->maximum > BOUNCE_BUFFER_SIZE) {
+ if (c->maximum > BOUNCE_BUFFER_SIZE)
c->maximum = BOUNCE_BUFFER_SIZE;
- pr_info_once("limiting nx842 maximum to %x\n", c->maximum);
- }
-
- return 0;
}
static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf)
@@ -260,7 +250,9 @@ nospc:
timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT);
do {
dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_compress(src, slen, dst, &dlen, ctx->wmem);
+ ret = nx842_platform_driver()->compress(src, slen,
+ dst, &dlen,
+ ctx->wmem);
/* possibly we should reduce the slen here, instead of
* retrying with the dbounce buffer?
*/
@@ -297,12 +289,14 @@ static int nx842_crypto_compress(struct crypto_tfm *tfm,
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_crypto_header *hdr = &ctx->header;
struct nx842_crypto_param p;
- struct nx842_constraints c;
+ struct nx842_constraints c = *nx842_platform_driver()->constraints;
unsigned int groups, hdrsize, h;
int ret, n;
bool add_header;
u16 ignore = 0;
+ check_constraints(&c);
+
p.in = (u8 *)src;
p.iremain = slen;
p.out = dst;
@@ -311,10 +305,6 @@ static int nx842_crypto_compress(struct crypto_tfm *tfm,
*dlen = 0;
- ret = read_constraints(&c);
- if (ret)
- return ret;
-
groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX,
DIV_ROUND_UP(p.iremain, c.maximum));
hdrsize = NX842_CRYPTO_HEADER_SIZE(groups);
@@ -381,8 +371,7 @@ static int decompress(struct nx842_crypto_ctx *ctx,
struct nx842_crypto_param *p,
struct nx842_crypto_header_group *g,
struct nx842_constraints *c,
- u16 ignore,
- bool usehw)
+ u16 ignore)
{
unsigned int slen = be32_to_cpu(g->compressed_length);
unsigned int required_len = be32_to_cpu(g->uncompressed_length);
@@ -404,9 +393,6 @@ static int decompress(struct nx842_crypto_ctx *ctx,
src += padding;
- if (!usehw)
- goto usesw;
-
if (slen % c->multiple)
adj_slen = round_up(slen, c->multiple);
if (slen < c->minimum)
@@ -443,7 +429,9 @@ static int decompress(struct nx842_crypto_ctx *ctx,
timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT);
do {
dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_decompress(src, slen, dst, &dlen, ctx->wmem);
+ ret = nx842_platform_driver()->decompress(src, slen,
+ dst, &dlen,
+ ctx->wmem);
} while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
if (ret) {
usesw:
@@ -486,10 +474,11 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_crypto_header *hdr;
struct nx842_crypto_param p;
- struct nx842_constraints c;
+ struct nx842_constraints c = *nx842_platform_driver()->constraints;
int n, ret, hdr_len;
u16 ignore = 0;
- bool usehw = true;
+
+ check_constraints(&c);
p.in = (u8 *)src;
p.iremain = slen;
@@ -499,9 +488,6 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
*dlen = 0;
- if (read_constraints(&c))
- usehw = false;
-
hdr = (struct nx842_crypto_header *)src;
spin_lock_bh(&ctx->lock);
@@ -516,7 +502,7 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
.uncompressed_length = cpu_to_be32(p.oremain),
};
- ret = decompress(ctx, &p, &g, &c, 0, usehw);
+ ret = decompress(ctx, &p, &g, &c, 0);
if (ret)
goto unlock;
@@ -549,7 +535,7 @@ static int nx842_crypto_decompress(struct crypto_tfm *tfm,
if (n + 1 == hdr->groups)
ignore = be16_to_cpu(hdr->ignore);
- ret = decompress(ctx, &p, &hdr->group[n], &c, ignore, usehw);
+ ret = decompress(ctx, &p, &hdr->group[n], &c, ignore);
if (ret)
goto unlock;
}
@@ -583,6 +569,18 @@ static struct crypto_alg alg = {
static int __init nx842_crypto_mod_init(void)
{
+ request_module("nx-compress-powernv");
+ request_module("nx-compress-pseries");
+
+ /* we prevent loading/registering if there's no platform driver,
+ * and we get the platform module that set it so it won't unload,
+ * so we don't need to check if it's set in any of our functions
+ */
+ if (!nx842_platform_driver_get()) {
+ pr_err("no nx842 platform driver found.\n");
+ return -ENODEV;
+ }
+
return crypto_register_alg(&alg);
}
module_init(nx842_crypto_mod_init);
@@ -590,11 +588,13 @@ module_init(nx842_crypto_mod_init);
static void __exit nx842_crypto_mod_exit(void)
{
crypto_unregister_alg(&alg);
+
+ nx842_platform_driver_put();
}
module_exit(nx842_crypto_mod_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Interface");
+MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver");
MODULE_ALIAS_CRYPTO("842");
MODULE_ALIAS_CRYPTO("842-nx");
MODULE_AUTHOR("Dan Streetman <[email protected]>");
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
deleted file mode 100644
index 6e5e0d6..0000000
--- a/drivers/crypto/nx/nx-842.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Driver frontend for IBM Power 842 compression accelerator
- *
- * Copyright (C) 2015 Dan Streetman, IBM Corp
- *
- * Designer of the Power data compression engine:
- * Bulent Abali <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "nx-842.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dan Streetman <[email protected]>");
-MODULE_DESCRIPTION("842 H/W Compression driver for IBM Power processors");
-
-/**
- * nx842_constraints
- *
- * This provides the driver's constraints. Different nx842 implementations
- * may have varying requirements. The constraints are:
- * @alignment: All buffers should be aligned to this
- * @multiple: All buffer lengths should be a multiple of this
- * @minimum: Buffer lengths must not be less than this amount
- * @maximum: Buffer lengths must not be more than this amount
- *
- * The constraints apply to all buffers and lengths, both input and output,
- * for both compression and decompression, except for the minimum which
- * only applies to compression input and decompression output; the
- * compressed data can be less than the minimum constraint. It can be
- * assumed that compressed data will always adhere to the multiple
- * constraint.
- *
- * The driver may succeed even if these constraints are violated;
- * however the driver can return failure or suffer reduced performance
- * if any constraint is not met.
- */
-int nx842_constraints(struct nx842_constraints *c)
-{
- memcpy(c, nx842_platform_driver()->constraints, sizeof(*c));
- return 0;
-}
-EXPORT_SYMBOL_GPL(nx842_constraints);
-
-/**
- * nx842_workmem_size
- *
- * Get the amount of working memory the driver requires.
- */
-size_t nx842_workmem_size(void)
-{
- return nx842_platform_driver()->workmem_size;
-}
-EXPORT_SYMBOL_GPL(nx842_workmem_size);
-
-int nx842_compress(const unsigned char *in, unsigned int ilen,
- unsigned char *out, unsigned int *olen, void *wmem)
-{
- return nx842_platform_driver()->compress(in, ilen, out, olen, wmem);
-}
-EXPORT_SYMBOL_GPL(nx842_compress);
-
-int nx842_decompress(const unsigned char *in, unsigned int ilen,
- unsigned char *out, unsigned int *olen, void *wmem)
-{
- return nx842_platform_driver()->decompress(in, ilen, out, olen, wmem);
-}
-EXPORT_SYMBOL_GPL(nx842_decompress);
-
-static __init int nx842_init(void)
-{
- request_module("nx-compress-powernv");
- request_module("nx-compress-pseries");
-
- /* we prevent loading if there's no platform driver, and we get the
- * module that set it so it won't unload, so we don't need to check
- * if it's set in any of the above functions
- */
- if (!nx842_platform_driver_get()) {
- pr_err("no nx842 driver found.\n");
- return -ENODEV;
- }
-
- return 0;
-}
-module_init(nx842_init);
-
-static void __exit nx842_exit(void)
-{
- nx842_platform_driver_put();
-}
-module_exit(nx842_exit);
diff --git a/drivers/crypto/nx/nx-842.h b/drivers/crypto/nx/nx-842.h
index ac0ea79..c7dd0a4 100644
--- a/drivers/crypto/nx/nx-842.h
+++ b/drivers/crypto/nx/nx-842.h
@@ -104,6 +104,25 @@ static inline unsigned long nx842_get_pa(void *addr)
#define GET_FIELD(v, m) (((v) & (m)) >> MASK_LSH(m))
#define SET_FIELD(v, m, val) (((v) & ~(m)) | (((val) << MASK_LSH(m)) & (m)))
+/**
+ * This provides the driver's constraints. Different nx842 implementations
+ * may have varying requirements. The constraints are:
+ * @alignment: All buffers should be aligned to this
+ * @multiple: All buffer lengths should be a multiple of this
+ * @minimum: Buffer lengths must not be less than this amount
+ * @maximum: Buffer lengths must not be more than this amount
+ *
+ * The constraints apply to all buffers and lengths, both input and output,
+ * for both compression and decompression, except for the minimum which
+ * only applies to compression input and decompression output; the
+ * compressed data can be less than the minimum constraint. It can be
+ * assumed that compressed data will always adhere to the multiple
+ * constraint.
+ *
+ * The driver may succeed even if these constraints are violated;
+ * however the driver can return failure or suffer reduced performance
+ * if any constraint is not met.
+ */
struct nx842_constraints {
int alignment;
int multiple;
@@ -132,13 +151,4 @@ void nx842_platform_driver_unset(struct nx842_driver *driver);
bool nx842_platform_driver_get(void);
void nx842_platform_driver_put(void);
-size_t nx842_workmem_size(void);
-
-int nx842_constraints(struct nx842_constraints *constraints);
-
-int nx842_compress(const unsigned char *in, unsigned int in_len,
- unsigned char *out, unsigned int *out_len, void *wrkmem);
-int nx842_decompress(const unsigned char *in, unsigned int in_len,
- unsigned char *out, unsigned int *out_len, void *wrkmem);
-
#endif /* __NX_842_H__ */
--
2.1.0
The last commit merged nx-842.c's code into nx-842-crypto.c. It
did not rename nx-842-crypto.c to nx-842.c, in order to let the
patch more clearly show what was merged. This just renames
nx-842-crypto.c to nx-842.c, with no changes to its code.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/Makefile | 2 +-
drivers/crypto/nx/nx-842-crypto.c | 600 --------------------------------------
drivers/crypto/nx/nx-842.c | 600 ++++++++++++++++++++++++++++++++++++++
3 files changed, 601 insertions(+), 601 deletions(-)
delete mode 100644 drivers/crypto/nx/nx-842-crypto.c
create mode 100644 drivers/crypto/nx/nx-842.c
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index e29ee85..ffcc86c 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -13,7 +13,7 @@ nx-crypto-objs := nx.o \
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS) += nx-compress.o nx-compress-platform.o
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o
-nx-compress-objs := nx-842-crypto.o
+nx-compress-objs := nx-842.o
nx-compress-platform-objs := nx-842-platform.o
nx-compress-pseries-objs := nx-842-pseries.o
nx-compress-powernv-objs := nx-842-powernv.o
diff --git a/drivers/crypto/nx/nx-842-crypto.c b/drivers/crypto/nx/nx-842-crypto.c
deleted file mode 100644
index 4472e20..0000000
--- a/drivers/crypto/nx/nx-842-crypto.c
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Cryptographic API for the NX-842 hardware compression.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Copyright (C) IBM Corporation, 2011-2015
- *
- * Designer of the Power data compression engine:
- * Bulent Abali <[email protected]>
- *
- * Original Authors: Robert Jennings <[email protected]>
- * Seth Jennings <[email protected]>
- *
- * Rewrite: Dan Streetman <[email protected]>
- *
- * This is an interface to the NX-842 compression hardware in PowerPC
- * processors. Most of the complexity of this drvier is due to the fact that
- * the NX-842 compression hardware requires the input and output data buffers
- * to be specifically aligned, to be a specific multiple in length, and within
- * specific minimum and maximum lengths. Those restrictions, provided by the
- * nx-842 driver via nx842_constraints, mean this driver must use bounce
- * buffers and headers to correct misaligned in or out buffers, and to split
- * input buffers that are too large.
- *
- * This driver will fall back to software decompression if the hardware
- * decompression fails, so this driver's decompression should never fail as
- * long as the provided compressed buffer is valid. Any compressed buffer
- * created by this driver will have a header (except ones where the input
- * perfectly matches the constraints); so users of this driver cannot simply
- * pass a compressed buffer created by this driver over to the 842 software
- * decompression library. Instead, users must use this driver to decompress;
- * if the hardware fails or is unavailable, the compressed buffer will be
- * parsed and the header removed, and the raw 842 buffer(s) passed to the 842
- * software decompression library.
- *
- * This does not fall back to software compression, however, since the caller
- * of this function is specifically requesting hardware compression; if the
- * hardware compression fails, the caller can fall back to software
- * compression, and the raw 842 compressed buffer that the software compressor
- * creates can be passed to this driver for hardware decompression; any
- * buffer without our specific header magic is assumed to be a raw 842 buffer
- * and passed directly to the hardware. Note that the software compression
- * library will produce a compressed buffer that is incompatible with the
- * hardware decompressor if the original input buffer length is not a multiple
- * of 8; if such a compressed buffer is passed to this driver for
- * decompression, the hardware will reject it and this driver will then pass
- * it over to the software library for decompression.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <linux/vmalloc.h>
-#include <linux/sw842.h>
-#include <linux/ratelimit.h>
-#include <linux/spinlock.h>
-
-#include "nx-842.h"
-
-/* The first 5 bits of this magic are 0x1f, which is an invalid 842 5-bit
- * template (see lib/842/842.h), so this magic number will never appear at
- * the start of a raw 842 compressed buffer. That is important, as any buffer
- * passed to us without this magic is assumed to be a raw 842 compressed
- * buffer, and passed directly to the hardware to decompress.
- */
-#define NX842_CRYPTO_MAGIC (0xf842)
-#define NX842_CRYPTO_GROUP_MAX (0x20)
-#define NX842_CRYPTO_HEADER_SIZE(g) \
- (sizeof(struct nx842_crypto_header) + \
- sizeof(struct nx842_crypto_header_group) * (g))
-#define NX842_CRYPTO_HEADER_MAX_SIZE \
- NX842_CRYPTO_HEADER_SIZE(NX842_CRYPTO_GROUP_MAX)
-
-/* bounce buffer size */
-#define BOUNCE_BUFFER_ORDER (2)
-#define BOUNCE_BUFFER_SIZE \
- ((unsigned int)(PAGE_SIZE << BOUNCE_BUFFER_ORDER))
-
-/* try longer on comp because we can fallback to sw decomp if hw is busy */
-#define COMP_BUSY_TIMEOUT (250) /* ms */
-#define DECOMP_BUSY_TIMEOUT (50) /* ms */
-
-struct nx842_crypto_header_group {
- __be16 padding; /* unused bytes at start of group */
- __be32 compressed_length; /* compressed bytes in group */
- __be32 uncompressed_length; /* bytes after decompression */
-} __packed;
-
-struct nx842_crypto_header {
- __be16 magic; /* NX842_CRYPTO_MAGIC */
- __be16 ignore; /* decompressed end bytes to ignore */
- u8 groups; /* total groups in this header */
- struct nx842_crypto_header_group group[];
-} __packed;
-
-struct nx842_crypto_param {
- u8 *in;
- unsigned int iremain;
- u8 *out;
- unsigned int oremain;
- unsigned int ototal;
-};
-
-static int update_param(struct nx842_crypto_param *p,
- unsigned int slen, unsigned int dlen)
-{
- if (p->iremain < slen)
- return -EOVERFLOW;
- if (p->oremain < dlen)
- return -ENOSPC;
-
- p->in += slen;
- p->iremain -= slen;
- p->out += dlen;
- p->oremain -= dlen;
- p->ototal += dlen;
-
- return 0;
-}
-
-struct nx842_crypto_ctx {
- spinlock_t lock;
-
- u8 *wmem;
- u8 *sbounce, *dbounce;
-
- struct nx842_crypto_header header;
- struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
-};
-
-static int nx842_crypto_init(struct crypto_tfm *tfm)
-{
- struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
-
- spin_lock_init(&ctx->lock);
- ctx->wmem = kmalloc(nx842_workmem_size(), GFP_KERNEL);
- ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
- ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
- if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) {
- kfree(ctx->wmem);
- free_page((unsigned long)ctx->sbounce);
- free_page((unsigned long)ctx->dbounce);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void nx842_crypto_exit(struct crypto_tfm *tfm)
-{
- struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
-
- kfree(ctx->wmem);
- free_page((unsigned long)ctx->sbounce);
- free_page((unsigned long)ctx->dbounce);
-}
-
-static void check_constraints(struct nx842_constraints *c)
-{
- /* limit maximum, to always have enough bounce buffer to decompress */
- if (c->maximum > BOUNCE_BUFFER_SIZE)
- c->maximum = BOUNCE_BUFFER_SIZE;
-}
-
-static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf)
-{
- int s = NX842_CRYPTO_HEADER_SIZE(hdr->groups);
-
- /* compress should have added space for header */
- if (s > be16_to_cpu(hdr->group[0].padding)) {
- pr_err("Internal error: no space for header\n");
- return -EINVAL;
- }
-
- memcpy(buf, hdr, s);
-
- print_hex_dump_debug("header ", DUMP_PREFIX_OFFSET, 16, 1, buf, s, 0);
-
- return 0;
-}
-
-static int compress(struct nx842_crypto_ctx *ctx,
- struct nx842_crypto_param *p,
- struct nx842_crypto_header_group *g,
- struct nx842_constraints *c,
- u16 *ignore,
- unsigned int hdrsize)
-{
- unsigned int slen = p->iremain, dlen = p->oremain, tmplen;
- unsigned int adj_slen = slen;
- u8 *src = p->in, *dst = p->out;
- int ret, dskip = 0;
- ktime_t timeout;
-
- if (p->iremain == 0)
- return -EOVERFLOW;
-
- if (p->oremain == 0 || hdrsize + c->minimum > dlen)
- return -ENOSPC;
-
- if (slen % c->multiple)
- adj_slen = round_up(slen, c->multiple);
- if (slen < c->minimum)
- adj_slen = c->minimum;
- if (slen > c->maximum)
- adj_slen = slen = c->maximum;
- if (adj_slen > slen || (u64)src % c->alignment) {
- adj_slen = min(adj_slen, BOUNCE_BUFFER_SIZE);
- slen = min(slen, BOUNCE_BUFFER_SIZE);
- if (adj_slen > slen)
- memset(ctx->sbounce + slen, 0, adj_slen - slen);
- memcpy(ctx->sbounce, src, slen);
- src = ctx->sbounce;
- slen = adj_slen;
- pr_debug("using comp sbounce buffer, len %x\n", slen);
- }
-
- dst += hdrsize;
- dlen -= hdrsize;
-
- if ((u64)dst % c->alignment) {
- dskip = (int)(PTR_ALIGN(dst, c->alignment) - dst);
- dst += dskip;
- dlen -= dskip;
- }
- if (dlen % c->multiple)
- dlen = round_down(dlen, c->multiple);
- if (dlen < c->minimum) {
-nospc:
- dst = ctx->dbounce;
- dlen = min(p->oremain, BOUNCE_BUFFER_SIZE);
- dlen = round_down(dlen, c->multiple);
- dskip = 0;
- pr_debug("using comp dbounce buffer, len %x\n", dlen);
- }
- if (dlen > c->maximum)
- dlen = c->maximum;
-
- tmplen = dlen;
- timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT);
- do {
- dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_platform_driver()->compress(src, slen,
- dst, &dlen,
- ctx->wmem);
- /* possibly we should reduce the slen here, instead of
- * retrying with the dbounce buffer?
- */
- if (ret == -ENOSPC && dst != ctx->dbounce)
- goto nospc;
- } while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
- if (ret)
- return ret;
-
- dskip += hdrsize;
-
- if (dst == ctx->dbounce)
- memcpy(p->out + dskip, dst, dlen);
-
- g->padding = cpu_to_be16(dskip);
- g->compressed_length = cpu_to_be32(dlen);
- g->uncompressed_length = cpu_to_be32(slen);
-
- if (p->iremain < slen) {
- *ignore = slen - p->iremain;
- slen = p->iremain;
- }
-
- pr_debug("compress slen %x ignore %x dlen %x padding %x\n",
- slen, *ignore, dlen, dskip);
-
- return update_param(p, slen, dskip + dlen);
-}
-
-static int nx842_crypto_compress(struct crypto_tfm *tfm,
- const u8 *src, unsigned int slen,
- u8 *dst, unsigned int *dlen)
-{
- struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
- struct nx842_crypto_header *hdr = &ctx->header;
- struct nx842_crypto_param p;
- struct nx842_constraints c = *nx842_platform_driver()->constraints;
- unsigned int groups, hdrsize, h;
- int ret, n;
- bool add_header;
- u16 ignore = 0;
-
- check_constraints(&c);
-
- p.in = (u8 *)src;
- p.iremain = slen;
- p.out = dst;
- p.oremain = *dlen;
- p.ototal = 0;
-
- *dlen = 0;
-
- groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX,
- DIV_ROUND_UP(p.iremain, c.maximum));
- hdrsize = NX842_CRYPTO_HEADER_SIZE(groups);
-
- spin_lock_bh(&ctx->lock);
-
- /* skip adding header if the buffers meet all constraints */
- add_header = (p.iremain % c.multiple ||
- p.iremain < c.minimum ||
- p.iremain > c.maximum ||
- (u64)p.in % c.alignment ||
- p.oremain % c.multiple ||
- p.oremain < c.minimum ||
- p.oremain > c.maximum ||
- (u64)p.out % c.alignment);
-
- hdr->magic = cpu_to_be16(NX842_CRYPTO_MAGIC);
- hdr->groups = 0;
- hdr->ignore = 0;
-
- while (p.iremain > 0) {
- n = hdr->groups++;
- ret = -ENOSPC;
- if (hdr->groups > NX842_CRYPTO_GROUP_MAX)
- goto unlock;
-
- /* header goes before first group */
- h = !n && add_header ? hdrsize : 0;
-
- if (ignore)
- pr_warn("interal error, ignore is set %x\n", ignore);
-
- ret = compress(ctx, &p, &hdr->group[n], &c, &ignore, h);
- if (ret)
- goto unlock;
- }
-
- if (!add_header && hdr->groups > 1) {
- pr_err("Internal error: No header but multiple groups\n");
- ret = -EINVAL;
- goto unlock;
- }
-
- /* ignore indicates the input stream needed to be padded */
- hdr->ignore = cpu_to_be16(ignore);
- if (ignore)
- pr_debug("marked %d bytes as ignore\n", ignore);
-
- if (add_header)
- ret = nx842_crypto_add_header(hdr, dst);
- if (ret)
- goto unlock;
-
- *dlen = p.ototal;
-
- pr_debug("compress total slen %x dlen %x\n", slen, *dlen);
-
-unlock:
- spin_unlock_bh(&ctx->lock);
- return ret;
-}
-
-static int decompress(struct nx842_crypto_ctx *ctx,
- struct nx842_crypto_param *p,
- struct nx842_crypto_header_group *g,
- struct nx842_constraints *c,
- u16 ignore)
-{
- unsigned int slen = be32_to_cpu(g->compressed_length);
- unsigned int required_len = be32_to_cpu(g->uncompressed_length);
- unsigned int dlen = p->oremain, tmplen;
- unsigned int adj_slen = slen;
- u8 *src = p->in, *dst = p->out;
- u16 padding = be16_to_cpu(g->padding);
- int ret, spadding = 0, dpadding = 0;
- ktime_t timeout;
-
- if (!slen || !required_len)
- return -EINVAL;
-
- if (p->iremain <= 0 || padding + slen > p->iremain)
- return -EOVERFLOW;
-
- if (p->oremain <= 0 || required_len - ignore > p->oremain)
- return -ENOSPC;
-
- src += padding;
-
- if (slen % c->multiple)
- adj_slen = round_up(slen, c->multiple);
- if (slen < c->minimum)
- adj_slen = c->minimum;
- if (slen > c->maximum)
- goto usesw;
- if (slen < adj_slen || (u64)src % c->alignment) {
- /* we can append padding bytes because the 842 format defines
- * an "end" template (see lib/842/842_decompress.c) and will
- * ignore any bytes following it.
- */
- if (slen < adj_slen)
- memset(ctx->sbounce + slen, 0, adj_slen - slen);
- memcpy(ctx->sbounce, src, slen);
- src = ctx->sbounce;
- spadding = adj_slen - slen;
- slen = adj_slen;
- pr_debug("using decomp sbounce buffer, len %x\n", slen);
- }
-
- if (dlen % c->multiple)
- dlen = round_down(dlen, c->multiple);
- if (dlen < required_len || (u64)dst % c->alignment) {
- dst = ctx->dbounce;
- dlen = min(required_len, BOUNCE_BUFFER_SIZE);
- pr_debug("using decomp dbounce buffer, len %x\n", dlen);
- }
- if (dlen < c->minimum)
- goto usesw;
- if (dlen > c->maximum)
- dlen = c->maximum;
-
- tmplen = dlen;
- timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT);
- do {
- dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_platform_driver()->decompress(src, slen,
- dst, &dlen,
- ctx->wmem);
- } while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
- if (ret) {
-usesw:
- /* reset everything, sw doesn't have constraints */
- src = p->in + padding;
- slen = be32_to_cpu(g->compressed_length);
- spadding = 0;
- dst = p->out;
- dlen = p->oremain;
- dpadding = 0;
- if (dlen < required_len) { /* have ignore bytes */
- dst = ctx->dbounce;
- dlen = BOUNCE_BUFFER_SIZE;
- }
- pr_info_ratelimited("using software 842 decompression\n");
- ret = sw842_decompress(src, slen, dst, &dlen);
- }
- if (ret)
- return ret;
-
- slen -= spadding;
-
- dlen -= ignore;
- if (ignore)
- pr_debug("ignoring last %x bytes\n", ignore);
-
- if (dst == ctx->dbounce)
- memcpy(p->out, dst, dlen);
-
- pr_debug("decompress slen %x padding %x dlen %x ignore %x\n",
- slen, padding, dlen, ignore);
-
- return update_param(p, slen + padding, dlen);
-}
-
-static int nx842_crypto_decompress(struct crypto_tfm *tfm,
- const u8 *src, unsigned int slen,
- u8 *dst, unsigned int *dlen)
-{
- struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
- struct nx842_crypto_header *hdr;
- struct nx842_crypto_param p;
- struct nx842_constraints c = *nx842_platform_driver()->constraints;
- int n, ret, hdr_len;
- u16 ignore = 0;
-
- check_constraints(&c);
-
- p.in = (u8 *)src;
- p.iremain = slen;
- p.out = dst;
- p.oremain = *dlen;
- p.ototal = 0;
-
- *dlen = 0;
-
- hdr = (struct nx842_crypto_header *)src;
-
- spin_lock_bh(&ctx->lock);
-
- /* If it doesn't start with our header magic number, assume it's a raw
- * 842 compressed buffer and pass it directly to the hardware driver
- */
- if (be16_to_cpu(hdr->magic) != NX842_CRYPTO_MAGIC) {
- struct nx842_crypto_header_group g = {
- .padding = 0,
- .compressed_length = cpu_to_be32(p.iremain),
- .uncompressed_length = cpu_to_be32(p.oremain),
- };
-
- ret = decompress(ctx, &p, &g, &c, 0);
- if (ret)
- goto unlock;
-
- goto success;
- }
-
- if (!hdr->groups) {
- pr_err("header has no groups\n");
- ret = -EINVAL;
- goto unlock;
- }
- if (hdr->groups > NX842_CRYPTO_GROUP_MAX) {
- pr_err("header has too many groups %x, max %x\n",
- hdr->groups, NX842_CRYPTO_GROUP_MAX);
- ret = -EINVAL;
- goto unlock;
- }
-
- hdr_len = NX842_CRYPTO_HEADER_SIZE(hdr->groups);
- if (hdr_len > slen) {
- ret = -EOVERFLOW;
- goto unlock;
- }
-
- memcpy(&ctx->header, src, hdr_len);
- hdr = &ctx->header;
-
- for (n = 0; n < hdr->groups; n++) {
- /* ignore applies to last group */
- if (n + 1 == hdr->groups)
- ignore = be16_to_cpu(hdr->ignore);
-
- ret = decompress(ctx, &p, &hdr->group[n], &c, ignore);
- if (ret)
- goto unlock;
- }
-
-success:
- *dlen = p.ototal;
-
- pr_debug("decompress total slen %x dlen %x\n", slen, *dlen);
-
- ret = 0;
-
-unlock:
- spin_unlock_bh(&ctx->lock);
-
- return ret;
-}
-
-static struct crypto_alg alg = {
- .cra_name = "842",
- .cra_driver_name = "842-nx",
- .cra_priority = 300,
- .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
- .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
- .cra_module = THIS_MODULE,
- .cra_init = nx842_crypto_init,
- .cra_exit = nx842_crypto_exit,
- .cra_u = { .compress = {
- .coa_compress = nx842_crypto_compress,
- .coa_decompress = nx842_crypto_decompress } }
-};
-
-static int __init nx842_crypto_mod_init(void)
-{
- request_module("nx-compress-powernv");
- request_module("nx-compress-pseries");
-
- /* we prevent loading/registering if there's no platform driver,
- * and we get the platform module that set it so it won't unload,
- * so we don't need to check if it's set in any of our functions
- */
- if (!nx842_platform_driver_get()) {
- pr_err("no nx842 platform driver found.\n");
- return -ENODEV;
- }
-
- return crypto_register_alg(&alg);
-}
-module_init(nx842_crypto_mod_init);
-
-static void __exit nx842_crypto_mod_exit(void)
-{
- crypto_unregister_alg(&alg);
-
- nx842_platform_driver_put();
-}
-module_exit(nx842_crypto_mod_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver");
-MODULE_ALIAS_CRYPTO("842");
-MODULE_ALIAS_CRYPTO("842-nx");
-MODULE_AUTHOR("Dan Streetman <[email protected]>");
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
new file mode 100644
index 0000000..4472e20
--- /dev/null
+++ b/drivers/crypto/nx/nx-842.c
@@ -0,0 +1,600 @@
+/*
+ * Cryptographic API for the NX-842 hardware compression.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) IBM Corporation, 2011-2015
+ *
+ * Designer of the Power data compression engine:
+ * Bulent Abali <[email protected]>
+ *
+ * Original Authors: Robert Jennings <[email protected]>
+ * Seth Jennings <[email protected]>
+ *
+ * Rewrite: Dan Streetman <[email protected]>
+ *
+ * This is an interface to the NX-842 compression hardware in PowerPC
+ * processors. Most of the complexity of this drvier is due to the fact that
+ * the NX-842 compression hardware requires the input and output data buffers
+ * to be specifically aligned, to be a specific multiple in length, and within
+ * specific minimum and maximum lengths. Those restrictions, provided by the
+ * nx-842 driver via nx842_constraints, mean this driver must use bounce
+ * buffers and headers to correct misaligned in or out buffers, and to split
+ * input buffers that are too large.
+ *
+ * This driver will fall back to software decompression if the hardware
+ * decompression fails, so this driver's decompression should never fail as
+ * long as the provided compressed buffer is valid. Any compressed buffer
+ * created by this driver will have a header (except ones where the input
+ * perfectly matches the constraints); so users of this driver cannot simply
+ * pass a compressed buffer created by this driver over to the 842 software
+ * decompression library. Instead, users must use this driver to decompress;
+ * if the hardware fails or is unavailable, the compressed buffer will be
+ * parsed and the header removed, and the raw 842 buffer(s) passed to the 842
+ * software decompression library.
+ *
+ * This does not fall back to software compression, however, since the caller
+ * of this function is specifically requesting hardware compression; if the
+ * hardware compression fails, the caller can fall back to software
+ * compression, and the raw 842 compressed buffer that the software compressor
+ * creates can be passed to this driver for hardware decompression; any
+ * buffer without our specific header magic is assumed to be a raw 842 buffer
+ * and passed directly to the hardware. Note that the software compression
+ * library will produce a compressed buffer that is incompatible with the
+ * hardware decompressor if the original input buffer length is not a multiple
+ * of 8; if such a compressed buffer is passed to this driver for
+ * decompression, the hardware will reject it and this driver will then pass
+ * it over to the software library for decompression.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/vmalloc.h>
+#include <linux/sw842.h>
+#include <linux/ratelimit.h>
+#include <linux/spinlock.h>
+
+#include "nx-842.h"
+
+/* The first 5 bits of this magic are 0x1f, which is an invalid 842 5-bit
+ * template (see lib/842/842.h), so this magic number will never appear at
+ * the start of a raw 842 compressed buffer. That is important, as any buffer
+ * passed to us without this magic is assumed to be a raw 842 compressed
+ * buffer, and passed directly to the hardware to decompress.
+ */
+#define NX842_CRYPTO_MAGIC (0xf842)
+#define NX842_CRYPTO_GROUP_MAX (0x20)
+#define NX842_CRYPTO_HEADER_SIZE(g) \
+ (sizeof(struct nx842_crypto_header) + \
+ sizeof(struct nx842_crypto_header_group) * (g))
+#define NX842_CRYPTO_HEADER_MAX_SIZE \
+ NX842_CRYPTO_HEADER_SIZE(NX842_CRYPTO_GROUP_MAX)
+
+/* bounce buffer size */
+#define BOUNCE_BUFFER_ORDER (2)
+#define BOUNCE_BUFFER_SIZE \
+ ((unsigned int)(PAGE_SIZE << BOUNCE_BUFFER_ORDER))
+
+/* try longer on comp because we can fallback to sw decomp if hw is busy */
+#define COMP_BUSY_TIMEOUT (250) /* ms */
+#define DECOMP_BUSY_TIMEOUT (50) /* ms */
+
+struct nx842_crypto_header_group {
+ __be16 padding; /* unused bytes at start of group */
+ __be32 compressed_length; /* compressed bytes in group */
+ __be32 uncompressed_length; /* bytes after decompression */
+} __packed;
+
+struct nx842_crypto_header {
+ __be16 magic; /* NX842_CRYPTO_MAGIC */
+ __be16 ignore; /* decompressed end bytes to ignore */
+ u8 groups; /* total groups in this header */
+ struct nx842_crypto_header_group group[];
+} __packed;
+
+struct nx842_crypto_param {
+ u8 *in;
+ unsigned int iremain;
+ u8 *out;
+ unsigned int oremain;
+ unsigned int ototal;
+};
+
+static int update_param(struct nx842_crypto_param *p,
+ unsigned int slen, unsigned int dlen)
+{
+ if (p->iremain < slen)
+ return -EOVERFLOW;
+ if (p->oremain < dlen)
+ return -ENOSPC;
+
+ p->in += slen;
+ p->iremain -= slen;
+ p->out += dlen;
+ p->oremain -= dlen;
+ p->ototal += dlen;
+
+ return 0;
+}
+
+struct nx842_crypto_ctx {
+ spinlock_t lock;
+
+ u8 *wmem;
+ u8 *sbounce, *dbounce;
+
+ struct nx842_crypto_header header;
+ struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
+};
+
+static int nx842_crypto_init(struct crypto_tfm *tfm)
+{
+ struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ spin_lock_init(&ctx->lock);
+ ctx->wmem = kmalloc(nx842_workmem_size(), GFP_KERNEL);
+ ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
+ ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
+ if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) {
+ kfree(ctx->wmem);
+ free_page((unsigned long)ctx->sbounce);
+ free_page((unsigned long)ctx->dbounce);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void nx842_crypto_exit(struct crypto_tfm *tfm)
+{
+ struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ kfree(ctx->wmem);
+ free_page((unsigned long)ctx->sbounce);
+ free_page((unsigned long)ctx->dbounce);
+}
+
+static void check_constraints(struct nx842_constraints *c)
+{
+ /* limit maximum, to always have enough bounce buffer to decompress */
+ if (c->maximum > BOUNCE_BUFFER_SIZE)
+ c->maximum = BOUNCE_BUFFER_SIZE;
+}
+
+static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf)
+{
+ int s = NX842_CRYPTO_HEADER_SIZE(hdr->groups);
+
+ /* compress should have added space for header */
+ if (s > be16_to_cpu(hdr->group[0].padding)) {
+ pr_err("Internal error: no space for header\n");
+ return -EINVAL;
+ }
+
+ memcpy(buf, hdr, s);
+
+ print_hex_dump_debug("header ", DUMP_PREFIX_OFFSET, 16, 1, buf, s, 0);
+
+ return 0;
+}
+
+static int compress(struct nx842_crypto_ctx *ctx,
+ struct nx842_crypto_param *p,
+ struct nx842_crypto_header_group *g,
+ struct nx842_constraints *c,
+ u16 *ignore,
+ unsigned int hdrsize)
+{
+ unsigned int slen = p->iremain, dlen = p->oremain, tmplen;
+ unsigned int adj_slen = slen;
+ u8 *src = p->in, *dst = p->out;
+ int ret, dskip = 0;
+ ktime_t timeout;
+
+ if (p->iremain == 0)
+ return -EOVERFLOW;
+
+ if (p->oremain == 0 || hdrsize + c->minimum > dlen)
+ return -ENOSPC;
+
+ if (slen % c->multiple)
+ adj_slen = round_up(slen, c->multiple);
+ if (slen < c->minimum)
+ adj_slen = c->minimum;
+ if (slen > c->maximum)
+ adj_slen = slen = c->maximum;
+ if (adj_slen > slen || (u64)src % c->alignment) {
+ adj_slen = min(adj_slen, BOUNCE_BUFFER_SIZE);
+ slen = min(slen, BOUNCE_BUFFER_SIZE);
+ if (adj_slen > slen)
+ memset(ctx->sbounce + slen, 0, adj_slen - slen);
+ memcpy(ctx->sbounce, src, slen);
+ src = ctx->sbounce;
+ slen = adj_slen;
+ pr_debug("using comp sbounce buffer, len %x\n", slen);
+ }
+
+ dst += hdrsize;
+ dlen -= hdrsize;
+
+ if ((u64)dst % c->alignment) {
+ dskip = (int)(PTR_ALIGN(dst, c->alignment) - dst);
+ dst += dskip;
+ dlen -= dskip;
+ }
+ if (dlen % c->multiple)
+ dlen = round_down(dlen, c->multiple);
+ if (dlen < c->minimum) {
+nospc:
+ dst = ctx->dbounce;
+ dlen = min(p->oremain, BOUNCE_BUFFER_SIZE);
+ dlen = round_down(dlen, c->multiple);
+ dskip = 0;
+ pr_debug("using comp dbounce buffer, len %x\n", dlen);
+ }
+ if (dlen > c->maximum)
+ dlen = c->maximum;
+
+ tmplen = dlen;
+ timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT);
+ do {
+ dlen = tmplen; /* reset dlen, if we're retrying */
+ ret = nx842_platform_driver()->compress(src, slen,
+ dst, &dlen,
+ ctx->wmem);
+ /* possibly we should reduce the slen here, instead of
+ * retrying with the dbounce buffer?
+ */
+ if (ret == -ENOSPC && dst != ctx->dbounce)
+ goto nospc;
+ } while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
+ if (ret)
+ return ret;
+
+ dskip += hdrsize;
+
+ if (dst == ctx->dbounce)
+ memcpy(p->out + dskip, dst, dlen);
+
+ g->padding = cpu_to_be16(dskip);
+ g->compressed_length = cpu_to_be32(dlen);
+ g->uncompressed_length = cpu_to_be32(slen);
+
+ if (p->iremain < slen) {
+ *ignore = slen - p->iremain;
+ slen = p->iremain;
+ }
+
+ pr_debug("compress slen %x ignore %x dlen %x padding %x\n",
+ slen, *ignore, dlen, dskip);
+
+ return update_param(p, slen, dskip + dlen);
+}
+
+static int nx842_crypto_compress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen)
+{
+ struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct nx842_crypto_header *hdr = &ctx->header;
+ struct nx842_crypto_param p;
+ struct nx842_constraints c = *nx842_platform_driver()->constraints;
+ unsigned int groups, hdrsize, h;
+ int ret, n;
+ bool add_header;
+ u16 ignore = 0;
+
+ check_constraints(&c);
+
+ p.in = (u8 *)src;
+ p.iremain = slen;
+ p.out = dst;
+ p.oremain = *dlen;
+ p.ototal = 0;
+
+ *dlen = 0;
+
+ groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX,
+ DIV_ROUND_UP(p.iremain, c.maximum));
+ hdrsize = NX842_CRYPTO_HEADER_SIZE(groups);
+
+ spin_lock_bh(&ctx->lock);
+
+ /* skip adding header if the buffers meet all constraints */
+ add_header = (p.iremain % c.multiple ||
+ p.iremain < c.minimum ||
+ p.iremain > c.maximum ||
+ (u64)p.in % c.alignment ||
+ p.oremain % c.multiple ||
+ p.oremain < c.minimum ||
+ p.oremain > c.maximum ||
+ (u64)p.out % c.alignment);
+
+ hdr->magic = cpu_to_be16(NX842_CRYPTO_MAGIC);
+ hdr->groups = 0;
+ hdr->ignore = 0;
+
+ while (p.iremain > 0) {
+ n = hdr->groups++;
+ ret = -ENOSPC;
+ if (hdr->groups > NX842_CRYPTO_GROUP_MAX)
+ goto unlock;
+
+ /* header goes before first group */
+ h = !n && add_header ? hdrsize : 0;
+
+ if (ignore)
+ pr_warn("interal error, ignore is set %x\n", ignore);
+
+ ret = compress(ctx, &p, &hdr->group[n], &c, &ignore, h);
+ if (ret)
+ goto unlock;
+ }
+
+ if (!add_header && hdr->groups > 1) {
+ pr_err("Internal error: No header but multiple groups\n");
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ /* ignore indicates the input stream needed to be padded */
+ hdr->ignore = cpu_to_be16(ignore);
+ if (ignore)
+ pr_debug("marked %d bytes as ignore\n", ignore);
+
+ if (add_header)
+ ret = nx842_crypto_add_header(hdr, dst);
+ if (ret)
+ goto unlock;
+
+ *dlen = p.ototal;
+
+ pr_debug("compress total slen %x dlen %x\n", slen, *dlen);
+
+unlock:
+ spin_unlock_bh(&ctx->lock);
+ return ret;
+}
+
+static int decompress(struct nx842_crypto_ctx *ctx,
+ struct nx842_crypto_param *p,
+ struct nx842_crypto_header_group *g,
+ struct nx842_constraints *c,
+ u16 ignore)
+{
+ unsigned int slen = be32_to_cpu(g->compressed_length);
+ unsigned int required_len = be32_to_cpu(g->uncompressed_length);
+ unsigned int dlen = p->oremain, tmplen;
+ unsigned int adj_slen = slen;
+ u8 *src = p->in, *dst = p->out;
+ u16 padding = be16_to_cpu(g->padding);
+ int ret, spadding = 0, dpadding = 0;
+ ktime_t timeout;
+
+ if (!slen || !required_len)
+ return -EINVAL;
+
+ if (p->iremain <= 0 || padding + slen > p->iremain)
+ return -EOVERFLOW;
+
+ if (p->oremain <= 0 || required_len - ignore > p->oremain)
+ return -ENOSPC;
+
+ src += padding;
+
+ if (slen % c->multiple)
+ adj_slen = round_up(slen, c->multiple);
+ if (slen < c->minimum)
+ adj_slen = c->minimum;
+ if (slen > c->maximum)
+ goto usesw;
+ if (slen < adj_slen || (u64)src % c->alignment) {
+ /* we can append padding bytes because the 842 format defines
+ * an "end" template (see lib/842/842_decompress.c) and will
+ * ignore any bytes following it.
+ */
+ if (slen < adj_slen)
+ memset(ctx->sbounce + slen, 0, adj_slen - slen);
+ memcpy(ctx->sbounce, src, slen);
+ src = ctx->sbounce;
+ spadding = adj_slen - slen;
+ slen = adj_slen;
+ pr_debug("using decomp sbounce buffer, len %x\n", slen);
+ }
+
+ if (dlen % c->multiple)
+ dlen = round_down(dlen, c->multiple);
+ if (dlen < required_len || (u64)dst % c->alignment) {
+ dst = ctx->dbounce;
+ dlen = min(required_len, BOUNCE_BUFFER_SIZE);
+ pr_debug("using decomp dbounce buffer, len %x\n", dlen);
+ }
+ if (dlen < c->minimum)
+ goto usesw;
+ if (dlen > c->maximum)
+ dlen = c->maximum;
+
+ tmplen = dlen;
+ timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT);
+ do {
+ dlen = tmplen; /* reset dlen, if we're retrying */
+ ret = nx842_platform_driver()->decompress(src, slen,
+ dst, &dlen,
+ ctx->wmem);
+ } while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
+ if (ret) {
+usesw:
+ /* reset everything, sw doesn't have constraints */
+ src = p->in + padding;
+ slen = be32_to_cpu(g->compressed_length);
+ spadding = 0;
+ dst = p->out;
+ dlen = p->oremain;
+ dpadding = 0;
+ if (dlen < required_len) { /* have ignore bytes */
+ dst = ctx->dbounce;
+ dlen = BOUNCE_BUFFER_SIZE;
+ }
+ pr_info_ratelimited("using software 842 decompression\n");
+ ret = sw842_decompress(src, slen, dst, &dlen);
+ }
+ if (ret)
+ return ret;
+
+ slen -= spadding;
+
+ dlen -= ignore;
+ if (ignore)
+ pr_debug("ignoring last %x bytes\n", ignore);
+
+ if (dst == ctx->dbounce)
+ memcpy(p->out, dst, dlen);
+
+ pr_debug("decompress slen %x padding %x dlen %x ignore %x\n",
+ slen, padding, dlen, ignore);
+
+ return update_param(p, slen + padding, dlen);
+}
+
+static int nx842_crypto_decompress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen)
+{
+ struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct nx842_crypto_header *hdr;
+ struct nx842_crypto_param p;
+ struct nx842_constraints c = *nx842_platform_driver()->constraints;
+ int n, ret, hdr_len;
+ u16 ignore = 0;
+
+ check_constraints(&c);
+
+ p.in = (u8 *)src;
+ p.iremain = slen;
+ p.out = dst;
+ p.oremain = *dlen;
+ p.ototal = 0;
+
+ *dlen = 0;
+
+ hdr = (struct nx842_crypto_header *)src;
+
+ spin_lock_bh(&ctx->lock);
+
+ /* If it doesn't start with our header magic number, assume it's a raw
+ * 842 compressed buffer and pass it directly to the hardware driver
+ */
+ if (be16_to_cpu(hdr->magic) != NX842_CRYPTO_MAGIC) {
+ struct nx842_crypto_header_group g = {
+ .padding = 0,
+ .compressed_length = cpu_to_be32(p.iremain),
+ .uncompressed_length = cpu_to_be32(p.oremain),
+ };
+
+ ret = decompress(ctx, &p, &g, &c, 0);
+ if (ret)
+ goto unlock;
+
+ goto success;
+ }
+
+ if (!hdr->groups) {
+ pr_err("header has no groups\n");
+ ret = -EINVAL;
+ goto unlock;
+ }
+ if (hdr->groups > NX842_CRYPTO_GROUP_MAX) {
+ pr_err("header has too many groups %x, max %x\n",
+ hdr->groups, NX842_CRYPTO_GROUP_MAX);
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ hdr_len = NX842_CRYPTO_HEADER_SIZE(hdr->groups);
+ if (hdr_len > slen) {
+ ret = -EOVERFLOW;
+ goto unlock;
+ }
+
+ memcpy(&ctx->header, src, hdr_len);
+ hdr = &ctx->header;
+
+ for (n = 0; n < hdr->groups; n++) {
+ /* ignore applies to last group */
+ if (n + 1 == hdr->groups)
+ ignore = be16_to_cpu(hdr->ignore);
+
+ ret = decompress(ctx, &p, &hdr->group[n], &c, ignore);
+ if (ret)
+ goto unlock;
+ }
+
+success:
+ *dlen = p.ototal;
+
+ pr_debug("decompress total slen %x dlen %x\n", slen, *dlen);
+
+ ret = 0;
+
+unlock:
+ spin_unlock_bh(&ctx->lock);
+
+ return ret;
+}
+
+static struct crypto_alg alg = {
+ .cra_name = "842",
+ .cra_driver_name = "842-nx",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = nx842_crypto_init,
+ .cra_exit = nx842_crypto_exit,
+ .cra_u = { .compress = {
+ .coa_compress = nx842_crypto_compress,
+ .coa_decompress = nx842_crypto_decompress } }
+};
+
+static int __init nx842_crypto_mod_init(void)
+{
+ request_module("nx-compress-powernv");
+ request_module("nx-compress-pseries");
+
+ /* we prevent loading/registering if there's no platform driver,
+ * and we get the platform module that set it so it won't unload,
+ * so we don't need to check if it's set in any of our functions
+ */
+ if (!nx842_platform_driver_get()) {
+ pr_err("no nx842 platform driver found.\n");
+ return -ENODEV;
+ }
+
+ return crypto_register_alg(&alg);
+}
+module_init(nx842_crypto_mod_init);
+
+static void __exit nx842_crypto_mod_exit(void)
+{
+ crypto_unregister_alg(&alg);
+
+ nx842_platform_driver_put();
+}
+module_exit(nx842_crypto_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
+MODULE_AUTHOR("Dan Streetman <[email protected]>");
--
2.1.0
Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers. Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.
The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name. This removes unneeded complexity.
Signed-off-by: Dan Streetman <[email protected]>
---
drivers/crypto/nx/Makefile | 6 +--
drivers/crypto/nx/nx-842-platform.c | 84 -----------------------------
drivers/crypto/nx/nx-842-powernv.c | 29 ++++++++--
drivers/crypto/nx/nx-842-pseries.c | 38 ++++++++++---
drivers/crypto/nx/nx-842.c | 105 +++++++-----------------------------
drivers/crypto/nx/nx-842.h | 43 ++++++++++++---
6 files changed, 114 insertions(+), 191 deletions(-)
delete mode 100644 drivers/crypto/nx/nx-842-platform.c
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index ffcc86c..b727821 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -10,10 +10,8 @@ nx-crypto-objs := nx.o \
nx-sha256.o \
nx-sha512.o
-obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS) += nx-compress.o nx-compress-platform.o
-obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o
-obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o
+obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o nx-compress.o
+obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o nx-compress.o
nx-compress-objs := nx-842.o
-nx-compress-platform-objs := nx-842-platform.o
nx-compress-pseries-objs := nx-842-pseries.o
nx-compress-powernv-objs := nx-842-powernv.o
diff --git a/drivers/crypto/nx/nx-842-platform.c b/drivers/crypto/nx/nx-842-platform.c
deleted file mode 100644
index 664f13d..0000000
--- a/drivers/crypto/nx/nx-842-platform.c
+++ /dev/null
@@ -1,84 +0,0 @@
-
-#include "nx-842.h"
-
-/* this is needed, separate from the main nx-842.c driver, because that main
- * driver loads the platform drivers during its init(), and it expects one
- * (or none) of the platform drivers to set this pointer to its driver.
- * That means this pointer can't be in the main nx-842 driver, because it
- * wouldn't be accessible until after the main driver loaded, which wouldn't
- * be possible as it's waiting for the platform driver to load. So place it
- * here.
- */
-static struct nx842_driver *driver;
-static DEFINE_SPINLOCK(driver_lock);
-
-struct nx842_driver *nx842_platform_driver(void)
-{
- return driver;
-}
-EXPORT_SYMBOL_GPL(nx842_platform_driver);
-
-bool nx842_platform_driver_set(struct nx842_driver *_driver)
-{
- bool ret = false;
-
- spin_lock(&driver_lock);
-
- if (!driver) {
- driver = _driver;
- ret = true;
- } else
- WARN(1, "can't set platform driver, already set to %s\n",
- driver->name);
-
- spin_unlock(&driver_lock);
- return ret;
-}
-EXPORT_SYMBOL_GPL(nx842_platform_driver_set);
-
-/* only call this from the platform driver exit function */
-void nx842_platform_driver_unset(struct nx842_driver *_driver)
-{
- spin_lock(&driver_lock);
-
- if (driver == _driver)
- driver = NULL;
- else if (driver)
- WARN(1, "can't unset platform driver %s, currently set to %s\n",
- _driver->name, driver->name);
- else
- WARN(1, "can't unset platform driver, already unset\n");
-
- spin_unlock(&driver_lock);
-}
-EXPORT_SYMBOL_GPL(nx842_platform_driver_unset);
-
-bool nx842_platform_driver_get(void)
-{
- bool ret = false;
-
- spin_lock(&driver_lock);
-
- if (driver)
- ret = try_module_get(driver->owner);
-
- spin_unlock(&driver_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(nx842_platform_driver_get);
-
-void nx842_platform_driver_put(void)
-{
- spin_lock(&driver_lock);
-
- if (driver)
- module_put(driver->owner);
-
- spin_unlock(&driver_lock);
-}
-EXPORT_SYMBOL_GPL(nx842_platform_driver_put);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dan Streetman <[email protected]>");
-MODULE_DESCRIPTION("842 H/W Compression platform driver");
diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c
index 7e47456..684ce51 100644
--- a/drivers/crypto/nx/nx-842-powernv.c
+++ b/drivers/crypto/nx/nx-842-powernv.c
@@ -26,6 +26,8 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dan Streetman <[email protected]>");
MODULE_DESCRIPTION("842 H/W Compression driver for IBM PowerNV processors");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
#define WORKMEM_ALIGN (CRB_ALIGN)
#define CSB_WAIT_MAX (5000) /* ms */
@@ -581,9 +583,29 @@ static struct nx842_driver nx842_powernv_driver = {
.decompress = nx842_powernv_decompress,
};
+static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
+{
+ return nx842_crypto_init(tfm, &nx842_powernv_driver);
+}
+
+static struct crypto_alg nx842_powernv_alg = {
+ .cra_name = "842",
+ .cra_driver_name = "842-nx",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = nx842_powernv_crypto_init,
+ .cra_exit = nx842_crypto_exit,
+ .cra_u = { .compress = {
+ .coa_compress = nx842_crypto_compress,
+ .coa_decompress = nx842_crypto_decompress } }
+};
+
static __init int nx842_powernv_init(void)
{
struct device_node *dn;
+ int ret;
/* verify workmem size/align restrictions */
BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
@@ -600,7 +622,8 @@ static __init int nx842_powernv_init(void)
if (!nx842_ct)
return -ENODEV;
- if (!nx842_platform_driver_set(&nx842_powernv_driver)) {
+ ret = crypto_register_alg(&nx842_powernv_alg);
+ if (ret) {
struct nx842_coproc *coproc, *n;
list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
@@ -608,7 +631,7 @@ static __init int nx842_powernv_init(void)
kfree(coproc);
}
- return -EEXIST;
+ return ret;
}
return 0;
@@ -619,7 +642,7 @@ static void __exit nx842_powernv_exit(void)
{
struct nx842_coproc *coproc, *n;
- nx842_platform_driver_unset(&nx842_powernv_driver);
+ crypto_unregister_alg(&nx842_powernv_alg);
list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
list_del(&coproc->list);
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index 4b7bd8f..b6a26907 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -29,6 +29,8 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Jennings <[email protected]>");
MODULE_DESCRIPTION("842 H/W Compression driver for IBM Power processors");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
static struct nx842_constraints nx842_pseries_constraints = {
.alignment = DDE_BUFFER_ALIGN,
@@ -957,6 +959,25 @@ static struct nx842_driver nx842_pseries_driver = {
.decompress = nx842_pseries_decompress,
};
+static int nx842_pseries_crypto_init(struct crypto_tfm *tfm)
+{
+ return nx842_crypto_init(tfm, &nx842_pseries_driver);
+}
+
+static struct crypto_alg nx842_pseries_alg = {
+ .cra_name = "842",
+ .cra_driver_name = "842-nx",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = nx842_pseries_crypto_init,
+ .cra_exit = nx842_crypto_exit,
+ .cra_u = { .compress = {
+ .coa_compress = nx842_crypto_compress,
+ .coa_decompress = nx842_crypto_decompress } }
+};
+
static int nx842_probe(struct vio_dev *viodev,
const struct vio_device_id *id)
{
@@ -1002,6 +1023,12 @@ static int nx842_probe(struct vio_dev *viodev,
if (ret)
goto error;
+ ret = crypto_register_alg(&nx842_pseries_alg);
+ if (ret) {
+ dev_err(&viodev->dev, "could not register comp alg: %d\n", ret);
+ goto error;
+ }
+
rcu_read_lock();
dev_set_drvdata(&viodev->dev, rcu_dereference(devdata));
rcu_read_unlock();
@@ -1031,6 +1058,8 @@ static int nx842_remove(struct vio_dev *viodev)
pr_info("Removing IBM Power 842 compression device\n");
sysfs_remove_group(&viodev->dev.kobj, &nx842_attribute_group);
+ crypto_unregister_alg(&nx842_pseries_alg);
+
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
@@ -1083,12 +1112,6 @@ static int __init nx842_pseries_init(void)
return ret;
}
- if (!nx842_platform_driver_set(&nx842_pseries_driver)) {
- vio_unregister_driver(&nx842_vio_driver);
- kfree(new_devdata);
- return -EEXIST;
- }
-
return 0;
}
@@ -1099,7 +1122,8 @@ static void __exit nx842_pseries_exit(void)
struct nx842_devdata *old_devdata;
unsigned long flags;
- nx842_platform_driver_unset(&nx842_pseries_driver);
+ crypto_unregister_alg(&nx842_pseries_alg);
+
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
index 4472e20..046c1c4 100644
--- a/drivers/crypto/nx/nx-842.c
+++ b/drivers/crypto/nx/nx-842.c
@@ -57,12 +57,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/crypto.h>
#include <linux/vmalloc.h>
#include <linux/sw842.h>
-#include <linux/ratelimit.h>
#include <linux/spinlock.h>
#include "nx-842.h"
@@ -74,7 +70,6 @@
* buffer, and passed directly to the hardware to decompress.
*/
#define NX842_CRYPTO_MAGIC (0xf842)
-#define NX842_CRYPTO_GROUP_MAX (0x20)
#define NX842_CRYPTO_HEADER_SIZE(g) \
(sizeof(struct nx842_crypto_header) + \
sizeof(struct nx842_crypto_header_group) * (g))
@@ -90,19 +85,6 @@
#define COMP_BUSY_TIMEOUT (250) /* ms */
#define DECOMP_BUSY_TIMEOUT (50) /* ms */
-struct nx842_crypto_header_group {
- __be16 padding; /* unused bytes at start of group */
- __be32 compressed_length; /* compressed bytes in group */
- __be32 uncompressed_length; /* bytes after decompression */
-} __packed;
-
-struct nx842_crypto_header {
- __be16 magic; /* NX842_CRYPTO_MAGIC */
- __be16 ignore; /* decompressed end bytes to ignore */
- u8 groups; /* total groups in this header */
- struct nx842_crypto_header_group group[];
-} __packed;
-
struct nx842_crypto_param {
u8 *in;
unsigned int iremain;
@@ -128,22 +110,13 @@ static int update_param(struct nx842_crypto_param *p,
return 0;
}
-struct nx842_crypto_ctx {
- spinlock_t lock;
-
- u8 *wmem;
- u8 *sbounce, *dbounce;
-
- struct nx842_crypto_header header;
- struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
-};
-
-static int nx842_crypto_init(struct crypto_tfm *tfm)
+int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
spin_lock_init(&ctx->lock);
- ctx->wmem = kmalloc(nx842_workmem_size(), GFP_KERNEL);
+ ctx->driver = driver;
+ ctx->wmem = kmalloc(driver->workmem_size, GFP_KERNEL);
ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER);
if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) {
@@ -155,8 +128,9 @@ static int nx842_crypto_init(struct crypto_tfm *tfm)
return 0;
}
+EXPORT_SYMBOL_GPL(nx842_crypto_init);
-static void nx842_crypto_exit(struct crypto_tfm *tfm)
+void nx842_crypto_exit(struct crypto_tfm *tfm)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
@@ -164,6 +138,7 @@ static void nx842_crypto_exit(struct crypto_tfm *tfm)
free_page((unsigned long)ctx->sbounce);
free_page((unsigned long)ctx->dbounce);
}
+EXPORT_SYMBOL_GPL(nx842_crypto_exit);
static void check_constraints(struct nx842_constraints *c)
{
@@ -250,9 +225,7 @@ nospc:
timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT);
do {
dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_platform_driver()->compress(src, slen,
- dst, &dlen,
- ctx->wmem);
+ ret = ctx->driver->compress(src, slen, dst, &dlen, ctx->wmem);
/* possibly we should reduce the slen here, instead of
* retrying with the dbounce buffer?
*/
@@ -282,14 +255,14 @@ nospc:
return update_param(p, slen, dskip + dlen);
}
-static int nx842_crypto_compress(struct crypto_tfm *tfm,
- const u8 *src, unsigned int slen,
- u8 *dst, unsigned int *dlen)
+int nx842_crypto_compress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_crypto_header *hdr = &ctx->header;
struct nx842_crypto_param p;
- struct nx842_constraints c = *nx842_platform_driver()->constraints;
+ struct nx842_constraints c = *ctx->driver->constraints;
unsigned int groups, hdrsize, h;
int ret, n;
bool add_header;
@@ -366,6 +339,7 @@ unlock:
spin_unlock_bh(&ctx->lock);
return ret;
}
+EXPORT_SYMBOL_GPL(nx842_crypto_compress);
static int decompress(struct nx842_crypto_ctx *ctx,
struct nx842_crypto_param *p,
@@ -429,9 +403,7 @@ static int decompress(struct nx842_crypto_ctx *ctx,
timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT);
do {
dlen = tmplen; /* reset dlen, if we're retrying */
- ret = nx842_platform_driver()->decompress(src, slen,
- dst, &dlen,
- ctx->wmem);
+ ret = ctx->driver->decompress(src, slen, dst, &dlen, ctx->wmem);
} while (ret == -EBUSY && ktime_before(ktime_get(), timeout));
if (ret) {
usesw:
@@ -467,14 +439,14 @@ usesw:
return update_param(p, slen + padding, dlen);
}
-static int nx842_crypto_decompress(struct crypto_tfm *tfm,
- const u8 *src, unsigned int slen,
- u8 *dst, unsigned int *dlen)
+int nx842_crypto_decompress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_crypto_header *hdr;
struct nx842_crypto_param p;
- struct nx842_constraints c = *nx842_platform_driver()->constraints;
+ struct nx842_constraints c = *ctx->driver->constraints;
int n, ret, hdr_len;
u16 ignore = 0;
@@ -552,49 +524,8 @@ unlock:
return ret;
}
-
-static struct crypto_alg alg = {
- .cra_name = "842",
- .cra_driver_name = "842-nx",
- .cra_priority = 300,
- .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
- .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
- .cra_module = THIS_MODULE,
- .cra_init = nx842_crypto_init,
- .cra_exit = nx842_crypto_exit,
- .cra_u = { .compress = {
- .coa_compress = nx842_crypto_compress,
- .coa_decompress = nx842_crypto_decompress } }
-};
-
-static int __init nx842_crypto_mod_init(void)
-{
- request_module("nx-compress-powernv");
- request_module("nx-compress-pseries");
-
- /* we prevent loading/registering if there's no platform driver,
- * and we get the platform module that set it so it won't unload,
- * so we don't need to check if it's set in any of our functions
- */
- if (!nx842_platform_driver_get()) {
- pr_err("no nx842 platform driver found.\n");
- return -ENODEV;
- }
-
- return crypto_register_alg(&alg);
-}
-module_init(nx842_crypto_mod_init);
-
-static void __exit nx842_crypto_mod_exit(void)
-{
- crypto_unregister_alg(&alg);
-
- nx842_platform_driver_put();
-}
-module_exit(nx842_crypto_mod_exit);
+EXPORT_SYMBOL_GPL(nx842_crypto_decompress);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver");
-MODULE_ALIAS_CRYPTO("842");
-MODULE_ALIAS_CRYPTO("842-nx");
MODULE_AUTHOR("Dan Streetman <[email protected]>");
diff --git a/drivers/crypto/nx/nx-842.h b/drivers/crypto/nx/nx-842.h
index c7dd0a4..a4eee3b 100644
--- a/drivers/crypto/nx/nx-842.h
+++ b/drivers/crypto/nx/nx-842.h
@@ -3,8 +3,9 @@
#define __NX_842_H__
#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/module.h>
-#include <linux/sw842.h>
+#include <linux/crypto.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -145,10 +146,40 @@ struct nx842_driver {
void *wrkmem);
};
-struct nx842_driver *nx842_platform_driver(void);
-bool nx842_platform_driver_set(struct nx842_driver *driver);
-void nx842_platform_driver_unset(struct nx842_driver *driver);
-bool nx842_platform_driver_get(void);
-void nx842_platform_driver_put(void);
+struct nx842_crypto_header_group {
+ __be16 padding; /* unused bytes at start of group */
+ __be32 compressed_length; /* compressed bytes in group */
+ __be32 uncompressed_length; /* bytes after decompression */
+} __packed;
+
+struct nx842_crypto_header {
+ __be16 magic; /* NX842_CRYPTO_MAGIC */
+ __be16 ignore; /* decompressed end bytes to ignore */
+ u8 groups; /* total groups in this header */
+ struct nx842_crypto_header_group group[];
+} __packed;
+
+#define NX842_CRYPTO_GROUP_MAX (0x20)
+
+struct nx842_crypto_ctx {
+ spinlock_t lock;
+
+ u8 *wmem;
+ u8 *sbounce, *dbounce;
+
+ struct nx842_crypto_header header;
+ struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
+
+ struct nx842_driver *driver;
+};
+
+int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver);
+void nx842_crypto_exit(struct crypto_tfm *tfm);
+int nx842_crypto_compress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen);
+int nx842_crypto_decompress(struct crypto_tfm *tfm,
+ const u8 *src, unsigned int slen,
+ u8 *dst, unsigned int *dlen);
#endif /* __NX_842_H__ */
--
2.1.0
On Wed, Jul 22, 2015 at 02:26:30PM -0400, Dan Streetman wrote:
> The shared 'platform' driver module isn't needed, the platform drivers
> can directly register with crypto instead. It only adds unneeded
> complexity and problems.
>
> The first 4 patches are minor updates/bugfixes to the pSeries driver.
>
> The 5th patch is a minor update to the NX crypto driver.
>
> The last 3 patches merge the crypto and common code driver, and move
> the crypto compression driver registration into the platform (pSeries
> and PowerNV) drivers. Both platform drivers use the same alg name and
> driver name when registering, but since only one (at most) will register
> on a system, depending on the platform, their registration will not
> conflict.
All applied. Thanks!
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt