This is the start of the stable review cycle for the 4.1.6 release.
There are 84 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Aug 16 17:41:54 UTC 2015.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.6-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.1.6-rc1
Jeff Layton <[email protected]>
nfsd: do nfs4_check_fh in nfs4_check_file instead of nfs4_check_olstateid
Christoph Hellwig <[email protected]>
nfsd: refactor nfs4_preprocess_stateid_op
Paolo Bonzini <[email protected]>
kvm: x86: fix kvm_apic_has_events to check for NULL pointer
Amanieu d'Antras <[email protected]>
signal: fix information leak in copy_siginfo_from_user32
Amanieu d'Antras <[email protected]>
signal: fix information leak in copy_siginfo_to_user
Amanieu d'Antras <[email protected]>
signalfd: fix information leak in signalfd_copyinfo
Michal Hocko <[email protected]>
mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations
Krzysztof Kozlowski <[email protected]>
thermal: exynos: Disable the regulator on probe failure
Hans de Goede <[email protected]>
Input: alps - only Dell laptops have separate button bits for v2 dualpoint sticks
Scott Wood <[email protected]>
mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict
Pieter Hollants <[email protected]>
USB: qcserial: Add support for Dell Wireless 5809e 4G Modem
Reinhard Speyerer <[email protected]>
USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355
Peter Chen <[email protected]>
usb: gadget: f_uac2: fix calculation of uac2->p_interval
Guenter Roeck <[email protected]>
staging: lustre: Include unaligned.h instead of access_ok.h
Malcolm Priestley <[email protected]>
staging: vt6655: vnt_bss_info_changed check conf->beacon_rate is not NULL
Mike Snitzer <[email protected]>
dm: fix dm_merge_bvec regression on 32 bit systems
NeilBrown <[email protected]>
md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies
Michael S. Tsirkin <[email protected]>
PCI: Restore PCI_MSIX_FLAGS_BIRMASK definition
Kinglong Mee <[email protected]>
nfsd: Drop BUG_ON and ignore SECLABEL on absent filesystem
Joseph Qi <[email protected]>
ocfs2: fix shift left overflow
Joseph Qi <[email protected]>
ocfs2: fix BUG in ocfs2_downconvert_thread_do_work()
Marcus Gelderie <[email protected]>
ipc: modify message queue accounting to not take kernel data structures into account
Pali Rohár <[email protected]>
hwmon: (dell-smm) Blacklist Dell Studio XPS 8100
Javier Martinez Canillas <[email protected]>
hwmon: (nct7904) Export I2C module alias information
Takashi Sakamoto <[email protected]>
ALSA: fireworks/firewire-lib: add support for recent firmware quirk
Hui Wang <[email protected]>
ALSA: hda - one Dell machine needs the headphone white noise fixup
Dan Carpenter <[email protected]>
ALSA: hda - fix cs4210_spdif_automute()
Roger Quadros <[email protected]>
ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
Denis Carikli <[email protected]>
ARM: dts: i.MX35: Fix can support.
Ilya Dryomov <[email protected]>
rbd: fix copyup completion race
Herbert Xu <[email protected]>
crypto: ixp4xx - Remove bogus BUG_ON on scattered dst buffer
Tadeusz Struk <[email protected]>
crypto: qat - Fix invalid synchronization between register/unregister sym algs
Martin Schwidefsky <[email protected]>
hwrng: core - correct error check of kthread_run call
Marek Marczykowski-Górecki <[email protected]>
xen/gntdevt: Fix race condition in gntdev_release()
Andy Lutomirski <[email protected]>
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
Lars-Peter Clausen <[email protected]>
ASoC: dapm: Don't add prefix to widget stream name
Lars-Peter Clausen <[email protected]>
ASoC: dapm: Lock during userspace access
Axel Lin <[email protected]>
ASoC: pcm1681: Fix setting de-emphasis sampling rate selection
Ben Zhang <[email protected]>
ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmt
Shilpa Sreeramalu <[email protected]>
ASoC: Intel: Get correct usage_count value to load firmware
Murali Karicheri <[email protected]>
ARM: dts: keystone: fix dt bindings to use post div register for mainpll
Murali Karicheri <[email protected]>
clk: keystone: add support for post divider register for main pll
David S. Miller <[email protected]>
sparc64: Fix userspace FPU register corruptions.
Herbert Xu <[email protected]>
crypto: nx - Fix reentrancy bugs
Leonidas Da Silva Barbosa <[email protected]>
crypto: nx - Fixing SHA update bug
Leonidas Da Silva Barbosa <[email protected]>
crypto: nx - Fixing NX data alignment with nx_sg list
Cyrille Pitchen <[email protected]>
dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
Andy Lutomirski <[email protected]>
x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
Andy Lutomirski <[email protected]>
x86/nmi/64: Reorder nested NMI checks
Andy Lutomirski <[email protected]>
x86/nmi/64: Improve nested NMI comments
Andy Lutomirski <[email protected]>
x86/nmi/64: Switch stacks on userspace NMI entry
Andy Lutomirski <[email protected]>
x86/nmi/64: Remove asm code that saves CR2
Andy Lutomirski <[email protected]>
x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
Andy Lutomirski <[email protected]>
x86/asm/entry/64: Remove pointless jump to irq_return
Michal Kazior <[email protected]>
ath10k: fix qca61x4 hw2.1 support
Benjamin Randazzo <[email protected]>
md: use kzalloc() when bitmap is disabled
NeilBrown <[email protected]>
phy: twl4030-usb: make runtime pm more reliable.
Peter Chen <[email protected]>
usb: chipidea: ehci_init_driver is intended to call one time
Alan Stern <[email protected]>
usb: udc: core: add device_del() call to error pathway
Dirk Behme <[email protected]>
USB: sierra: add 1199:68AB device ID
Gavin Shan <[email protected]>
drivers/usb: Delete XHCI command timer if necessary
Mathias Nyman <[email protected]>
xhci: fix off by one error in TRB DMA address boundary check
Krzysztof Kozlowski <[email protected]>
dmaengine: pl330: Really fix choppy sound because of wrong residue calculation
Krzysztof Kozlowski <[email protected]>
dmaengine: pl330: Fix overflow when reporting residue in memcpy
Johan Hedberg <[email protected]>
Bluetooth: Fix NULL pointer dereference in smp_conn_security
Brian King <[email protected]>
ipr: Fix invalid array indexing for HRRQ
Brian King <[email protected]>
ipr: Fix incorrect trace indexing
Brian King <[email protected]>
ipr: Fix locking for unit attention handling
Daniel Vetter <[email protected]>
drm/dp-mst: Remove debug WARN_ON
Alex Deucher <[email protected]>
drm/radeon/combios: add some validation of lvds values
Alex Deucher <[email protected]>
drm/radeon: rework audio detect (v4)
Chris Wilson <[email protected]>
drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop
Chris Wilson <[email protected]>
drm/i915: Declare the swizzling unknown for L-shaped configurations
Jan Kara <[email protected]>
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
David Daney <[email protected]>
MIPS: Make set_pte() SMP safe.
James Hogan <[email protected]>
MIPS: Flush RPS on kernel entry with EVA
Florian Fainelli <[email protected]>
Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook"
James Hogan <[email protected]>
MIPS: show_stack: Fix stack trace with EVA
James Hogan <[email protected]>
MIPS: do_mcheck: Fix kernel code dump with EVA
Felix Fietkau <[email protected]>
MIPS: Export get_c0_perfcount_int()
Felix Fietkau <[email protected]>
MIPS: Fix sched_getaffinity with MT FPAFF enabled
James Hogan <[email protected]>
MIPS: Malta: Don't reinitialise RTC
James Cowgill <[email protected]>
MIPS: Replace add and sub instructions in relocate_kernel.S with addiu
James Cowgill <[email protected]>
MIPS: unaligned: Fix build error on big endian R6 kernels
-------------
Diffstat:
.../devicetree/bindings/clock/keystone-pll.txt | 8 +-
Documentation/input/alps.txt | 6 +-
Makefile | 4 +-
arch/arm/boot/dts/imx35.dtsi | 8 +-
arch/arm/boot/dts/k2e-clocks.dtsi | 5 +-
arch/arm/boot/dts/k2hk-clocks.dtsi | 5 +-
arch/arm/boot/dts/k2l-clocks.dtsi | 5 +-
arch/arm/mach-omap2/omap_hwmod.c | 24 +-
arch/arm64/kernel/signal32.c | 5 +-
arch/mips/ath79/setup.c | 1 +
arch/mips/include/asm/mach-bcm63xx/dma-coherence.h | 10 -
arch/mips/include/asm/pgtable.h | 31 +++
arch/mips/include/asm/stackframe.h | 25 ++
arch/mips/kernel/mips-mt-fpaff.c | 5 +-
arch/mips/kernel/relocate_kernel.S | 8 +-
arch/mips/kernel/signal32.c | 2 -
arch/mips/kernel/traps.c | 13 +
arch/mips/kernel/unaligned.c | 2 +-
arch/mips/lantiq/irq.c | 1 +
arch/mips/mti-malta/malta-time.c | 16 +-
arch/mips/mti-sead3/sead3-time.c | 1 +
arch/mips/pistachio/time.c | 1 +
arch/mips/ralink/irq.c | 1 +
arch/powerpc/kernel/signal_32.c | 2 -
arch/sparc/include/asm/visasm.h | 16 +-
arch/sparc/lib/NG4memcpy.S | 5 +-
arch/sparc/lib/VISsave.S | 67 +----
arch/sparc/lib/ksyms.c | 4 -
arch/tile/kernel/compat_signal.c | 2 -
arch/x86/kernel/entry_64.S | 286 +++++++++++++--------
arch/x86/kernel/nmi.c | 123 ++++-----
arch/x86/kvm/lapic.h | 2 +-
arch/x86/xen/enlighten.c | 40 +++
drivers/block/rbd.c | 22 +-
drivers/char/hw_random/core.c | 2 +-
drivers/char/i8k.c | 18 +-
drivers/clk/keystone/pll.c | 20 +-
drivers/crypto/ixp4xx_crypto.c | 1 -
drivers/crypto/nx/nx-aes-ccm.c | 6 +-
drivers/crypto/nx/nx-aes-ctr.c | 7 +-
drivers/crypto/nx/nx-aes-gcm.c | 17 +-
drivers/crypto/nx/nx-aes-xcbc.c | 70 +++--
drivers/crypto/nx/nx-sha256.c | 105 ++++----
drivers/crypto/nx/nx-sha512.c | 107 ++++----
drivers/crypto/nx/nx.c | 71 ++---
drivers/crypto/nx/nx.h | 16 +-
drivers/crypto/qat/qat_common/qat_algs.c | 24 +-
drivers/dma/at_xdmac.c | 7 +-
drivers/dma/pl330.c | 3 +-
drivers/gpu/drm/drm_dp_mst_topology.c | 1 -
drivers/gpu/drm/i915/i915_drv.h | 17 +-
drivers/gpu/drm/i915/i915_gem_tiling.c | 5 +-
drivers/gpu/drm/radeon/dce6_afmt.c | 62 ++---
drivers/gpu/drm/radeon/radeon_audio.c | 143 +++++------
drivers/gpu/drm/radeon/radeon_audio.h | 3 +-
drivers/gpu/drm/radeon/radeon_combios.c | 7 +-
drivers/gpu/drm/radeon/radeon_connectors.c | 18 +-
drivers/gpu/drm/radeon/radeon_mode.h | 2 +-
drivers/hwmon/nct7904.c | 1 +
drivers/input/mouse/alps.c | 8 +-
drivers/md/dm.c | 27 +-
drivers/md/md.c | 2 +-
drivers/md/raid1.c | 10 +-
drivers/net/wireless/ath/ath10k/pci.c | 5 +-
drivers/phy/phy-twl4030-usb.c | 29 ++-
drivers/scsi/ipr.c | 28 +-
drivers/scsi/ipr.h | 1 +
drivers/staging/lustre/lustre/obdclass/debug.c | 2 +-
drivers/staging/vt6655/device_main.c | 5 +-
drivers/thermal/samsung/exynos_tmu.c | 2 +
drivers/usb/chipidea/core.c | 13 +-
drivers/usb/chipidea/host.c | 7 +-
drivers/usb/chipidea/host.h | 6 +
drivers/usb/gadget/function/f_uac2.c | 4 +-
drivers/usb/gadget/udc/udc-core.c | 1 +
drivers/usb/host/xhci-mem.c | 3 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/option.c | 2 +
drivers/usb/serial/qcserial.c | 2 +-
drivers/usb/serial/sierra.c | 1 +
drivers/xen/gntdev.c | 2 +
fs/nfsd/nfs4state.c | 101 ++++----
fs/nfsd/nfs4xdr.c | 11 +-
fs/notify/mark.c | 30 ++-
fs/ocfs2/aops.c | 4 +-
fs/ocfs2/dlmglue.c | 10 +-
fs/signalfd.c | 5 +-
include/linux/mtd/nand.h | 10 +-
include/uapi/linux/pci_regs.h | 1 +
ipc/mqueue.c | 5 -
kernel/signal.c | 13 +-
mm/vmscan.c | 14 +-
net/bluetooth/smp.c | 4 +
sound/firewire/amdtp.c | 5 +-
sound/firewire/amdtp.h | 2 +
sound/firewire/fireworks/fireworks.c | 8 +
sound/firewire/fireworks/fireworks.h | 1 +
sound/firewire/fireworks/fireworks_stream.c | 9 +
sound/pci/hda/patch_cirrus.c | 4 +-
sound/pci/hda/patch_realtek.c | 1 +
sound/soc/codecs/pcm1681.c | 2 +-
sound/soc/codecs/ssm4567.c | 8 +-
sound/soc/intel/atom/sst/sst_drv_interface.c | 14 +-
sound/soc/soc-dapm.c | 21 +-
104 files changed, 1115 insertions(+), 819 deletions(-)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Cowgill <[email protected]>
commit 531a6d599f4304156236ebdd531aaa80be61868d upstream.
Commit eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel
unaligned accesses") renamed the Load* and Store* defines in unaligned.c
to _Load* and _Store* as part of its fix. One define was missed out which
causes big endian R6 kernels to fail to build.
arch/mips/kernel/unaligned.c:880:35:
error: implicit declaration of function '_StoreDW'
#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
^
Signed-off-by: James Cowgill <[email protected]>
Fixes: eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses")
Cc: Markos Chandras <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10575/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/unaligned.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -438,7 +438,7 @@ do {
: "memory"); \
} while(0)
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Cowgill <[email protected]>
commit a4504755e7dc8d43ed2a934397032691cd03adf7 upstream.
Fixes the assembler errors generated when compiling a MIPS R6 kernel with
CONFIG_KEXEC on, by replacing the offending add and sub instructions with
addiu instructions.
Build errors:
arch/mips/kernel/relocate_kernel.S: Assembler messages:
arch/mips/kernel/relocate_kernel.S:27: Error: invalid operands `dadd $16,$16,8'
arch/mips/kernel/relocate_kernel.S:64: Error: invalid operands `dadd $20,$20,8'
arch/mips/kernel/relocate_kernel.S:65: Error: invalid operands `dadd $18,$18,8'
arch/mips/kernel/relocate_kernel.S:66: Error: invalid operands `dsub $22,$22,1'
scripts/Makefile.build:294: recipe for target 'arch/mips/kernel/relocate_kernel.o' failed
Signed-off-by: James Cowgill <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10558/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/relocate_kernel.S | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -24,7 +24,7 @@ LEAF(relocate_new_kernel)
process_entry:
PTR_L s2, (s0)
- PTR_ADD s0, s0, SZREG
+ PTR_ADDIU s0, s0, SZREG
/*
* In case of a kdump/crash kernel, the indirection page is not
@@ -61,9 +61,9 @@ copy_word:
/* copy page word by word */
REG_L s5, (s2)
REG_S s5, (s4)
- PTR_ADD s4, s4, SZREG
- PTR_ADD s2, s2, SZREG
- LONG_SUB s6, s6, 1
+ PTR_ADDIU s4, s4, SZREG
+ PTR_ADDIU s2, s2, SZREG
+ LONG_ADDIU s6, s6, -1
beq s6, zero, process_entry
b copy_word
b process_entry
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 106eccb4d20f35ebc58ff2286c170d9e79c5ff68 upstream.
On Malta, since commit a87ea88d8f6c ("MIPS: Malta: initialise the RTC at
boot"), the RTC is reinitialised and forced into binary coded decimal
(BCD) mode during init, even if the bootloader has already initialised
it, and may even have already put it into binary mode (as YAMON does).
This corrupts the current time, can result in the RTC seconds being an
invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing
YAMON for a while after reset, enough for it to report timeouts when
attempting to load from TFTP (it actually uses the RTC in that code).
Therefore only initialise the RTC to the extent that is necessary so
that Linux avoids interfering with the bootloader setup, while also
allowing it to estimate the CPU frequency without hanging, without a
bootloader necessarily having done anything with the RTC (for example
when the kernel is loaded via EJTAG).
The divider control is configured for a 32KHZ reference clock if
necessary, and the SET bit of the RTC_CONTROL register is cleared if
necessary without changing any other bits (this bit will be set when
coming out of reset if the battery has been disconnected).
Fixes: a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot")
Signed-off-by: James Hogan <[email protected]>
Reviewed-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10739/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/mti-malta/malta-time.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -165,14 +165,17 @@ unsigned int get_c0_compare_int(void)
static void __init init_rtc(void)
{
- /* stop the clock whilst setting it up */
- CMOS_WRITE(RTC_SET | RTC_24H, RTC_CONTROL);
+ unsigned char freq, ctrl;
- /* 32KHz time base */
- CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_FREQ_SELECT);
+ /* Set 32KHz time base if not already set */
+ freq = CMOS_READ(RTC_FREQ_SELECT);
+ if ((freq & RTC_DIV_CTL) != RTC_REF_CLCK_32KHZ)
+ CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_FREQ_SELECT);
- /* start the clock */
- CMOS_WRITE(RTC_24H, RTC_CONTROL);
+ /* Ensure SET bit is clear so RTC can run */
+ ctrl = CMOS_READ(RTC_CONTROL);
+ if (ctrl & RTC_SET)
+ CMOS_WRITE(ctrl & ~RTC_SET, RTC_CONTROL);
}
void __init plat_time_init(void)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 1d62d737555e1378eb62a8bba26644f7d97139d2 upstream.
p->thread.user_cpus_allowed is zero-initialized and is only filled on
the first sched_setaffinity call.
To avoid adding overhead in the task initialization codepath, simply OR
the returned mask in sched_getaffinity with p->cpus_allowed.
Signed-off-by: Felix Fietkau <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10740/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/mips-mt-fpaff.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
unsigned long __user *user_mask_ptr)
{
unsigned int real_len;
- cpumask_t mask;
+ cpumask_t allowed, mask;
int retval;
struct task_struct *p;
@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
if (retval)
goto out_unlock;
- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
+ cpumask_and(&mask, &allowed, cpu_active_mask);
out_unlock:
read_unlock(&tasklist_lock);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 0cb0985f57783c2f3c6c8ffe7e7665e80c56bd92 upstream.
get_c0_perfcount_int is tested from oprofile code. If oprofile is
compiled as module, get_c0_perfcount_int needs to be exported, otherwise
it cannot be resolved.
Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt")
Signed-off-by: Felix Fietkau <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10763/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/ath79/setup.c | 1 +
arch/mips/lantiq/irq.c | 1 +
arch/mips/mti-malta/malta-time.c | 1 +
arch/mips/mti-sead3/sead3-time.c | 1 +
arch/mips/pistachio/time.c | 1 +
arch/mips/ralink/irq.c | 1 +
6 files changed, 6 insertions(+)
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -186,6 +186,7 @@ int get_c0_perfcount_int(void)
{
return ATH79_MISC_IRQ(5);
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
unsigned int get_c0_compare_int(void)
{
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -466,6 +466,7 @@ int get_c0_perfcount_int(void)
{
return ltq_perfcount_irq;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
unsigned int get_c0_compare_int(void)
{
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -148,6 +148,7 @@ int get_c0_perfcount_int(void)
return mips_cpu_perf_irq;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
unsigned int get_c0_compare_int(void)
{
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -77,6 +77,7 @@ int get_c0_perfcount_int(void)
return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
return -1;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
unsigned int get_c0_compare_int(void)
{
--- a/arch/mips/pistachio/time.c
+++ b/arch/mips/pistachio/time.c
@@ -26,6 +26,7 @@ int get_c0_perfcount_int(void)
{
return gic_get_c0_perfcount_int();
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
void __init plat_time_init(void)
{
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -89,6 +89,7 @@ int get_c0_perfcount_int(void)
{
return rt_perfcount_irq;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
unsigned int get_c0_compare_int(void)
{
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 55c723e181ccec30fb5c672397fe69ec35967d97 upstream.
If a machine check exception is raised in kernel mode, user context,
with EVA enabled, then the do_mcheck handler will attempt to read the
code around the EPC using EVA load instructions, i.e. as if the reads
were from user mode. This will either read random user data if the
process has anything mapped at the same address, or it will cause an
exception which is handled by __get_user, resulting in this output:
Code: (Bad address in epc)
Fix by setting the current user access mode to kernel if the saved
register context indicates the exception was taken in kernel mode. This
causes __get_user to use normal loads to read the kernel code.
Signed-off-by: James Hogan <[email protected]>
Cc: Markos Chandras <[email protected]>
Cc: Leonid Yegoshin <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10777/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/traps.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1518,6 +1518,7 @@ asmlinkage void do_mcheck(struct pt_regs
const int field = 2 * sizeof(unsigned long);
int multi_match = regs->cp0_status & ST0_TS;
enum ctx_state prev_state;
+ mm_segment_t old_fs = get_fs();
prev_state = exception_enter();
show_regs(regs);
@@ -1539,8 +1540,13 @@ asmlinkage void do_mcheck(struct pt_regs
dump_tlb_all();
}
+ if (!user_mode(regs))
+ set_fs(KERNEL_DS);
+
show_code((unsigned int __user *) regs->cp0_epc);
+ set_fs(old_fs);
+
/*
* Some chips may have other causes of machine check (e.g. SB1
* graduation timer)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 1e77863a51698c4319587df34171bd823691a66a upstream.
The show_stack() function deals exclusively with kernel contexts, but if
it gets called in user context with EVA enabled, show_stacktrace() will
attempt to access the stack using EVA accesses, which will either read
other user mapped data, or more likely cause an exception which will be
handled by __get_user().
This is easily reproduced using SysRq t to show all task states, which
results in the following stack dump output:
Stack : (Bad stack address)
Fix by setting the current user access mode to kernel around the call to
show_stacktrace(). This causes __get_user() to use normal loads to read
the kernel stack.
Now we get the correct output, like this:
Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c
1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002
1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0
...
Signed-off-by: James Hogan <[email protected]>
Cc: Markos Chandras <[email protected]>
Cc: Leonid Yegoshin <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10778/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/traps.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -192,6 +192,7 @@ static void show_stacktrace(struct task_
void show_stack(struct task_struct *task, unsigned long *sp)
{
struct pt_regs regs;
+ mm_segment_t old_fs = get_fs();
if (sp) {
regs.regs[29] = (unsigned long)sp;
regs.regs[31] = 0;
@@ -210,7 +211,13 @@ void show_stack(struct task_struct *task
prepare_frametrace(®s);
}
}
+ /*
+ * show_stack() deals exclusively with kernel mode, so be sure to access
+ * the stack in the kernel (not user) address space.
+ */
+ set_fs(KERNEL_DS);
show_stacktrace(task, ®s);
+ set_fs(old_fs);
}
static void show_code(unsigned int __user *pc)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 3aff47c062b944a5e1f9af56a37a23f5295628fc upstream.
When EVA is enabled, flush the Return Prediction Stack (RPS) present on
some MIPS cores on entry to the kernel from user mode.
This is important specifically for interAptiv with EVA enabled,
otherwise kernel mode RPS mispredicts may trigger speculative fetches of
user return addresses, which may be sensitive in the kernel address
space due to EVA's overlapping user/kernel address spaces.
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Markos Chandras <[email protected]>
Cc: Leonid Yegoshin <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10812/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/stackframe.h | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -152,6 +152,31 @@
.set noreorder
bltz k0, 8f
move k1, sp
+#ifdef CONFIG_EVA
+ /*
+ * Flush interAptiv's Return Prediction Stack (RPS) by writing
+ * EntryHi. Toggling Config7.RPS is slower and less portable.
+ *
+ * The RPS isn't automatically flushed when exceptions are
+ * taken, which can result in kernel mode speculative accesses
+ * to user addresses if the RPS mispredicts. That's harmless
+ * when user and kernel share the same address space, but with
+ * EVA the same user segments may be unmapped to kernel mode,
+ * even containing sensitive MMIO regions or invalid memory.
+ *
+ * This can happen when the kernel sets the return address to
+ * ret_from_* and jr's to the exception handler, which looks
+ * more like a tail call than a function call. If nested calls
+ * don't evict the last user address in the RPS, it will
+ * mispredict the return and fetch from a user controlled
+ * address into the icache.
+ *
+ * More recent EVA-capable cores with MAAR to restrict
+ * speculative accesses aren't affected.
+ */
+ MFC0 k0, CP0_ENTRYHI
+ MTC0 k0, CP0_ENTRYHI
+#endif
.set reorder
/* Called from user mode, new stack. */
get_saved_sp
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Daney <[email protected]>
commit 46011e6ea39235e4aca656673c500eac81a07a17 upstream.
On MIPS the GLOBAL bit of the PTE must have the same value in any
aligned pair of PTEs. These pairs of PTEs are referred to as
"buddies". In a SMP system is is possible for two CPUs to be calling
set_pte() on adjacent PTEs at the same time. There is a race between
setting the PTE and a different CPU setting the GLOBAL bit in its
buddy PTE.
This race can be observed when multiple CPUs are executing
vmap()/vfree() at the same time.
Make setting the buddy PTE's GLOBAL bit an atomic operation to close
the race condition.
The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not*
handled.
Signed-off-by: David Daney <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10835/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/pgtable.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -182,8 +182,39 @@ static inline void set_pte(pte_t *ptep,
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
+#ifdef CONFIG_SMP
+ /*
+ * For SMP, multiple CPUs can race, so we need to do
+ * this atomically.
+ */
+#ifdef CONFIG_64BIT
+#define LL_INSN "lld"
+#define SC_INSN "scd"
+#else /* CONFIG_32BIT */
+#define LL_INSN "ll"
+#define SC_INSN "sc"
+#endif
+ unsigned long page_global = _PAGE_GLOBAL;
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+ " .set push\n"
+ " .set noreorder\n"
+ "1: " LL_INSN " %[tmp], %[buddy]\n"
+ " bnez %[tmp], 2f\n"
+ " or %[tmp], %[tmp], %[global]\n"
+ " " SC_INSN " %[tmp], %[buddy]\n"
+ " beqz %[tmp], 1b\n"
+ " nop\n"
+ "2:\n"
+ " .set pop"
+ : [buddy] "+m" (buddy->pte),
+ [tmp] "=&r" (tmp)
+ : [global] "r" (page_global));
+#else /* !CONFIG_SMP */
if (pte_none(*buddy))
pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+#endif /* CONFIG_SMP */
}
#endif
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 8f2f3eb59dff4ec538de55f2e0592fec85966aab upstream.
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so that when fsnotify_destroy_mark_locked()
drops mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and thus the next
entry pointer we have cached may become stale and we dereference free
memory.
Fix the problem by first moving marks to free to a special private list
and then always free the first entry in the special list. This method
is safe even when entries from the list can disappear once we drop the
lock.
Signed-off-by: Jan Kara <[email protected]>
Reported-by: Ashish Sangwan <[email protected]>
Reviewed-by: Ashish Sangwan <[email protected]>
Cc: Lino Sanfilippo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/notify/mark.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -412,16 +412,36 @@ void fsnotify_clear_marks_by_group_flags
unsigned int flags)
{
struct fsnotify_mark *lmark, *mark;
+ LIST_HEAD(to_free);
+ /*
+ * We have to be really careful here. Anytime we drop mark_mutex, e.g.
+ * fsnotify_clear_marks_by_inode() can come and free marks. Even in our
+ * to_free list so we have to use mark_mutex even when accessing that
+ * list. And freeing mark requires us to drop mark_mutex. So we can
+ * reliably free only the first mark in the list. That's why we first
+ * move marks to free to to_free list in one go and then free marks in
+ * to_free list one by one.
+ */
mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);
list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
- if (mark->flags & flags) {
- fsnotify_get_mark(mark);
- fsnotify_destroy_mark_locked(mark, group);
- fsnotify_put_mark(mark);
- }
+ if (mark->flags & flags)
+ list_move(&mark->g_list, &to_free);
}
mutex_unlock(&group->mark_mutex);
+
+ while (1) {
+ mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);
+ if (list_empty(&to_free)) {
+ mutex_unlock(&group->mark_mutex);
+ break;
+ }
+ mark = list_first_entry(&to_free, struct fsnotify_mark, g_list);
+ fsnotify_get_mark(mark);
+ fsnotify_destroy_mark_locked(mark, group);
+ mutex_unlock(&group->mark_mutex);
+ fsnotify_put_mark(mark);
+ }
}
/*
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 5eb3e5a5e11d14f9deb2a4b83555443b69ab9940 upstream.
The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle.
Note that this is a new attempt for the previously merged one,
reverted in
commit d82c0ba6e306f079407f07003e53c262d683397b
Author: Daniel Vetter <[email protected]>
Date: Tue Jul 14 12:29:27 2015 +0200
Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
This is cc: stable since we need it to fix up troubles with wc cpu
mmaps that userspace recently started to use widely.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105
Signed-off-by: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
[danvet: Add note about previous (failed attempt).]
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_gem_tiling.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -464,7 +464,10 @@ i915_gem_get_tiling(struct drm_device *d
}
/* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
- args->phys_swizzle_mode = args->swizzle_mode;
+ if (dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES)
+ args->phys_swizzle_mode = I915_BIT_6_SWIZZLE_UNKNOWN;
+ else
+ args->phys_swizzle_mode = args->swizzle_mode;
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d0ea397e22f9ad0113c1dbdaab14eded050472eb upstream.
1. Always assign audio function pointers even if the display does
not support audio. We need to properly disable the audio stream
when when using a non-audio capable monitor. Fixes purple line
on some hdmi monitors.
2. Check if a pin is in use by another encoder before disabling
it.
v2: make sure we've fetched the edid before checking audio and
look up the encoder before calling audio_detect since
connector->encoder may not be assigned yet. Separate
pin and afmt. They are allocated at different times and
have no dependency on eachother.
v3: fix connector fetching in encoder functions
v4: fix missed dig->pin check in dce6_afmt_write_latency_fields
bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=93701
https://bugzilla.redhat.com/show_bug.cgi?id=1236337
https://bugs.freedesktop.org/show_bug.cgi?id=91041
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/dce6_afmt.c | 62 +++++-------
drivers/gpu/drm/radeon/radeon_audio.c | 143 ++++++++++++-----------------
drivers/gpu/drm/radeon/radeon_audio.h | 3
drivers/gpu/drm/radeon/radeon_connectors.c | 18 ++-
drivers/gpu/drm/radeon/radeon_mode.h | 2
5 files changed, 105 insertions(+), 123 deletions(-)
--- a/drivers/gpu/drm/radeon/dce6_afmt.c
+++ b/drivers/gpu/drm/radeon/dce6_afmt.c
@@ -93,30 +93,26 @@ void dce6_afmt_select_pin(struct drm_enc
struct radeon_device *rdev = encoder->dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 offset;
- if (!dig || !dig->afmt || !dig->afmt->pin)
+ if (!dig || !dig->afmt || !dig->pin)
return;
- offset = dig->afmt->offset;
-
- WREG32(AFMT_AUDIO_SRC_CONTROL + offset,
- AFMT_AUDIO_SRC_SELECT(dig->afmt->pin->id));
+ WREG32(AFMT_AUDIO_SRC_CONTROL + dig->afmt->offset,
+ AFMT_AUDIO_SRC_SELECT(dig->pin->id));
}
void dce6_afmt_write_latency_fields(struct drm_encoder *encoder,
- struct drm_connector *connector, struct drm_display_mode *mode)
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 tmp = 0, offset;
+ u32 tmp = 0;
- if (!dig || !dig->afmt || !dig->afmt->pin)
+ if (!dig || !dig->afmt || !dig->pin)
return;
- offset = dig->afmt->pin->offset;
-
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
if (connector->latency_present[1])
tmp = VIDEO_LIPSYNC(connector->video_latency[1]) |
@@ -130,24 +126,24 @@ void dce6_afmt_write_latency_fields(stru
else
tmp = VIDEO_LIPSYNC(0) | AUDIO_LIPSYNC(0);
}
- WREG32_ENDPOINT(offset, AZ_F0_CODEC_PIN_CONTROL_RESPONSE_LIPSYNC, tmp);
+ WREG32_ENDPOINT(dig->pin->offset,
+ AZ_F0_CODEC_PIN_CONTROL_RESPONSE_LIPSYNC, tmp);
}
void dce6_afmt_hdmi_write_speaker_allocation(struct drm_encoder *encoder,
- u8 *sadb, int sad_count)
+ u8 *sadb, int sad_count)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 offset, tmp;
+ u32 tmp;
- if (!dig || !dig->afmt || !dig->afmt->pin)
+ if (!dig || !dig->afmt || !dig->pin)
return;
- offset = dig->afmt->pin->offset;
-
/* program the speaker allocation */
- tmp = RREG32_ENDPOINT(offset, AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER);
+ tmp = RREG32_ENDPOINT(dig->pin->offset,
+ AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set HDMI mode */
tmp |= HDMI_CONNECTION;
@@ -155,24 +151,24 @@ void dce6_afmt_hdmi_write_speaker_alloca
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
- WREG32_ENDPOINT(offset, AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER, tmp);
+ WREG32_ENDPOINT(dig->pin->offset,
+ AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER, tmp);
}
void dce6_afmt_dp_write_speaker_allocation(struct drm_encoder *encoder,
- u8 *sadb, int sad_count)
+ u8 *sadb, int sad_count)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 offset, tmp;
+ u32 tmp;
- if (!dig || !dig->afmt || !dig->afmt->pin)
+ if (!dig || !dig->afmt || !dig->pin)
return;
- offset = dig->afmt->pin->offset;
-
/* program the speaker allocation */
- tmp = RREG32_ENDPOINT(offset, AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER);
+ tmp = RREG32_ENDPOINT(dig->pin->offset,
+ AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(HDMI_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set DP mode */
tmp |= DP_CONNECTION;
@@ -180,13 +176,13 @@ void dce6_afmt_dp_write_speaker_allocati
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
- WREG32_ENDPOINT(offset, AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER, tmp);
+ WREG32_ENDPOINT(dig->pin->offset,
+ AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER, tmp);
}
void dce6_afmt_write_sad_regs(struct drm_encoder *encoder,
- struct cea_sad *sads, int sad_count)
+ struct cea_sad *sads, int sad_count)
{
- u32 offset;
int i;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
@@ -206,11 +202,9 @@ void dce6_afmt_write_sad_regs(struct drm
{ AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO },
};
- if (!dig || !dig->afmt || !dig->afmt->pin)
+ if (!dig || !dig->afmt || !dig->pin)
return;
- offset = dig->afmt->pin->offset;
-
for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) {
u32 value = 0;
u8 stereo_freqs = 0;
@@ -237,7 +231,7 @@ void dce6_afmt_write_sad_regs(struct drm
value |= SUPPORTED_FREQUENCIES_STEREO(stereo_freqs);
- WREG32_ENDPOINT(offset, eld_reg_to_type[i][0], value);
+ WREG32_ENDPOINT(dig->pin->offset, eld_reg_to_type[i][0], value);
}
}
@@ -253,7 +247,7 @@ void dce6_audio_enable(struct radeon_dev
}
void dce6_hdmi_audio_set_dto(struct radeon_device *rdev,
- struct radeon_crtc *crtc, unsigned int clock)
+ struct radeon_crtc *crtc, unsigned int clock)
{
/* Two dtos; generally use dto0 for HDMI */
u32 value = 0;
@@ -272,7 +266,7 @@ void dce6_hdmi_audio_set_dto(struct rade
}
void dce6_dp_audio_set_dto(struct radeon_device *rdev,
- struct radeon_crtc *crtc, unsigned int clock)
+ struct radeon_crtc *crtc, unsigned int clock)
{
/* Two dtos; generally use dto1 for DP */
u32 value = 0;
--- a/drivers/gpu/drm/radeon/radeon_audio.c
+++ b/drivers/gpu/drm/radeon/radeon_audio.c
@@ -245,6 +245,28 @@ static struct radeon_audio_funcs dce6_dp
static void radeon_audio_enable(struct radeon_device *rdev,
struct r600_audio_pin *pin, u8 enable_mask)
{
+ struct drm_encoder *encoder;
+ struct radeon_encoder *radeon_encoder;
+ struct radeon_encoder_atom_dig *dig;
+ int pin_count = 0;
+
+ if (!pin)
+ return;
+
+ if (rdev->mode_info.mode_config_initialized) {
+ list_for_each_entry(encoder, &rdev->ddev->mode_config.encoder_list, head) {
+ if (radeon_encoder_is_digital(encoder)) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ dig = radeon_encoder->enc_priv;
+ if (dig->pin == pin)
+ pin_count++;
+ }
+ }
+
+ if ((pin_count > 1) && (enable_mask == 0))
+ return;
+ }
+
if (rdev->audio.funcs->enable)
rdev->audio.funcs->enable(rdev, pin, enable_mask);
}
@@ -336,24 +358,13 @@ void radeon_audio_endpoint_wreg(struct r
static void radeon_audio_write_sad_regs(struct drm_encoder *encoder)
{
- struct radeon_encoder *radeon_encoder;
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector = NULL;
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct cea_sad *sads;
int sad_count;
- list_for_each_entry(connector,
- &encoder->dev->mode_config.connector_list, head) {
- if (connector->encoder == encoder) {
- radeon_connector = to_radeon_connector(connector);
- break;
- }
- }
-
- if (!radeon_connector) {
- DRM_ERROR("Couldn't find encoder's connector\n");
+ if (!connector)
return;
- }
sad_count = drm_edid_to_sad(radeon_connector_edid(connector), &sads);
if (sad_count <= 0) {
@@ -362,8 +373,6 @@ static void radeon_audio_write_sad_regs(
}
BUG_ON(!sads);
- radeon_encoder = to_radeon_encoder(encoder);
-
if (radeon_encoder->audio && radeon_encoder->audio->write_sad_regs)
radeon_encoder->audio->write_sad_regs(encoder, sads, sad_count);
@@ -372,27 +381,16 @@ static void radeon_audio_write_sad_regs(
static void radeon_audio_write_speaker_allocation(struct drm_encoder *encoder)
{
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector = NULL;
u8 *sadb = NULL;
int sad_count;
- list_for_each_entry(connector,
- &encoder->dev->mode_config.connector_list, head) {
- if (connector->encoder == encoder) {
- radeon_connector = to_radeon_connector(connector);
- break;
- }
- }
-
- if (!radeon_connector) {
- DRM_ERROR("Couldn't find encoder's connector\n");
+ if (!connector)
return;
- }
- sad_count = drm_edid_to_speaker_allocation(
- radeon_connector_edid(connector), &sadb);
+ sad_count = drm_edid_to_speaker_allocation(radeon_connector_edid(connector),
+ &sadb);
if (sad_count < 0) {
DRM_DEBUG("Couldn't read Speaker Allocation Data Block: %d\n",
sad_count);
@@ -406,26 +404,13 @@ static void radeon_audio_write_speaker_a
}
static void radeon_audio_write_latency_fields(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
+ struct drm_display_mode *mode)
{
- struct radeon_encoder *radeon_encoder;
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector = 0;
-
- list_for_each_entry(connector,
- &encoder->dev->mode_config.connector_list, head) {
- if (connector->encoder == encoder) {
- radeon_connector = to_radeon_connector(connector);
- break;
- }
- }
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- if (!radeon_connector) {
- DRM_ERROR("Couldn't find encoder's connector\n");
+ if (!connector)
return;
- }
-
- radeon_encoder = to_radeon_encoder(encoder);
if (radeon_encoder->audio && radeon_encoder->audio->write_latency_fields)
radeon_encoder->audio->write_latency_fields(encoder, connector, mode);
@@ -451,29 +436,23 @@ static void radeon_audio_select_pin(stru
}
void radeon_audio_detect(struct drm_connector *connector,
+ struct drm_encoder *encoder,
enum drm_connector_status status)
{
- struct radeon_device *rdev;
- struct radeon_encoder *radeon_encoder;
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig;
- if (!connector || !connector->encoder)
+ if (!radeon_audio_chipset_supported(rdev))
return;
- rdev = connector->encoder->dev->dev_private;
-
- if (!radeon_audio_chipset_supported(rdev))
+ if (!radeon_encoder_is_digital(encoder))
return;
- radeon_encoder = to_radeon_encoder(connector->encoder);
dig = radeon_encoder->enc_priv;
if (status == connector_status_connected) {
- if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) {
- radeon_encoder->audio = NULL;
- return;
- }
-
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
@@ -486,11 +465,17 @@ void radeon_audio_detect(struct drm_conn
radeon_encoder->audio = rdev->audio.hdmi_funcs;
}
- dig->afmt->pin = radeon_audio_get_pin(connector->encoder);
- radeon_audio_enable(rdev, dig->afmt->pin, 0xf);
+ if (drm_detect_monitor_audio(radeon_connector_edid(connector))) {
+ if (!dig->pin)
+ dig->pin = radeon_audio_get_pin(encoder);
+ radeon_audio_enable(rdev, dig->pin, 0xf);
+ } else {
+ radeon_audio_enable(rdev, dig->pin, 0);
+ dig->pin = NULL;
+ }
} else {
- radeon_audio_enable(rdev, dig->afmt->pin, 0);
- dig->afmt->pin = NULL;
+ radeon_audio_enable(rdev, dig->pin, 0);
+ dig->pin = NULL;
}
}
@@ -518,29 +503,18 @@ static void radeon_audio_set_dto(struct
}
static int radeon_audio_set_avi_packet(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
+ struct drm_display_mode *mode)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector = NULL;
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
int err;
- list_for_each_entry(connector,
- &encoder->dev->mode_config.connector_list, head) {
- if (connector->encoder == encoder) {
- radeon_connector = to_radeon_connector(connector);
- break;
- }
- }
-
- if (!radeon_connector) {
- DRM_ERROR("Couldn't find encoder's connector\n");
- return -ENOENT;
- }
+ if (!connector)
+ return -EINVAL;
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
@@ -563,8 +537,8 @@ static int radeon_audio_set_avi_packet(s
return err;
}
- if (dig && dig->afmt &&
- radeon_encoder->audio && radeon_encoder->audio->set_avi_packet)
+ if (dig && dig->afmt && radeon_encoder->audio &&
+ radeon_encoder->audio->set_avi_packet)
radeon_encoder->audio->set_avi_packet(rdev, dig->afmt->offset,
buffer, sizeof(buffer));
@@ -745,7 +719,7 @@ static void radeon_audio_hdmi_mode_set(s
}
static void radeon_audio_dp_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
+ struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
@@ -756,6 +730,9 @@ static void radeon_audio_dp_mode_set(str
struct radeon_connector_atom_dig *dig_connector =
radeon_connector->con_priv;
+ if (!connector)
+ return;
+
if (!dig || !dig->afmt)
return;
@@ -774,7 +751,7 @@ static void radeon_audio_dp_mode_set(str
}
void radeon_audio_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
+ struct drm_display_mode *mode)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
--- a/drivers/gpu/drm/radeon/radeon_audio.h
+++ b/drivers/gpu/drm/radeon/radeon_audio.h
@@ -68,7 +68,8 @@ struct radeon_audio_funcs
int radeon_audio_init(struct radeon_device *rdev);
void radeon_audio_detect(struct drm_connector *connector,
- enum drm_connector_status status);
+ struct drm_encoder *encoder,
+ enum drm_connector_status status);
u32 radeon_audio_endpoint_rreg(struct radeon_device *rdev,
u32 offset, u32 reg);
void radeon_audio_endpoint_wreg(struct radeon_device *rdev,
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1379,8 +1379,16 @@ out:
/* updated in get modes as well since we need to know if it's analog or digital */
radeon_connector_update_scratch_regs(connector, ret);
- if (radeon_audio != 0)
- radeon_audio_detect(connector, ret);
+ if ((radeon_audio != 0) && radeon_connector->use_digital) {
+ const struct drm_connector_helper_funcs *connector_funcs =
+ connector->helper_private;
+
+ encoder = connector_funcs->best_encoder(connector);
+ if (encoder && (encoder->encoder_type == DRM_MODE_ENCODER_TMDS)) {
+ radeon_connector_get_edid(connector);
+ radeon_audio_detect(connector, encoder, ret);
+ }
+ }
exit:
pm_runtime_mark_last_busy(connector->dev->dev);
@@ -1717,8 +1725,10 @@ radeon_dp_detect(struct drm_connector *c
radeon_connector_update_scratch_regs(connector, ret);
- if (radeon_audio != 0)
- radeon_audio_detect(connector, ret);
+ if ((radeon_audio != 0) && encoder) {
+ radeon_connector_get_edid(connector);
+ radeon_audio_detect(connector, encoder, ret);
+ }
out:
pm_runtime_mark_last_busy(connector->dev->dev);
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -237,7 +237,6 @@ struct radeon_afmt {
int offset;
bool last_buffer_filled_status;
int id;
- struct r600_audio_pin *pin;
};
struct radeon_mode_info {
@@ -439,6 +438,7 @@ struct radeon_encoder_atom_dig {
uint8_t backlight_level;
int panel_mode;
struct radeon_afmt *afmt;
+ struct r600_audio_pin *pin;
int active_mst_links;
};
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 0a90a0cff9f429f886f423967ae053150dce9259 upstream.
Fixes a broken hsync start value uncovered by:
abc0b1447d4974963548777a5ba4a4457c82c426
(drm: Perform basic sanity checks on probed modes)
The driver handled the bad hsync start elsewhere, but
the above commit prevented it from getting added.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91401
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_combios.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1255,10 +1255,15 @@ struct radeon_encoder_lvds *radeon_combi
if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) &&
(RBIOS16(tmp + 2) == lvds->native_mode.vdisplay)) {
+ u32 hss = (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - 1) * 8;
+
+ if (hss > lvds->native_mode.hdisplay)
+ hss = (10 - 1) * 8;
+
lvds->native_mode.htotal = lvds->native_mode.hdisplay +
(RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8;
lvds->native_mode.hsync_start = lvds->native_mode.hdisplay +
- (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - 1) * 8;
+ hss;
lvds->native_mode.hsync_end = lvds->native_mode.hsync_start +
(RBIOS8(tmp + 23) * 8);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <[email protected]>
commit 42639ba554655c280ae6cb72df0522b1201f2961 upstream.
Apparently been in there since forever and fairly easy to hit when
hotplugging really fast. I can do that since my mst hub has a manual
button to flick the hpd line for reprobing. The resulting WARNING spam
isn't pretty.
Cc: Dave Airlie <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Reviewed-by: Ander Conselvan de Oliveira <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -1294,7 +1294,6 @@ retry:
goto retry;
}
DRM_DEBUG_KMS("failed to dpcd write %d %d\n", tosend, ret);
- WARN(1, "fail\n");
return -EIO;
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit 36b8e180e1e929e00b351c3b72aab3147fc14116 upstream.
Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes
a crash seen as the __devices list in the scsi host was changing as we were
iterating through it.
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6263,21 +6263,23 @@ static void ipr_scsi_done(struct ipr_cmn
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
- unsigned long hrrq_flags;
+ unsigned long lock_flags;
scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->s.ioasa.hdr.residual_data_len));
if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
scsi_dma_unmap(scsi_cmd);
- spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_lock_irqsave(ipr_cmd->hrrq->lock, lock_flags);
list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
scsi_cmd->scsi_done(scsi_cmd);
- spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_unlock_irqrestore(ipr_cmd->hrrq->lock, lock_flags);
} else {
- spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ spin_lock(&ipr_cmd->hrrq->_lock);
ipr_erp_start(ioa_cfg, ipr_cmd);
- spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_unlock(&ipr_cmd->hrrq->_lock);
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
}
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit bb7c54339e6a10ecce5c4961adf5e75b3cf0af30 upstream.
When ipr's internal driver trace was changed to an atomic, a signed/unsigned
bug slipped in which results in us indexing backwards in our memory buffer
writing on memory that does not belong to us. This patch fixes this by removing
the modulo and instead just mask off the low bits.
Tested-by: Wen Xiong <[email protected]>
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 5 +++--
drivers/scsi/ipr.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -599,9 +599,10 @@ static void ipr_trc_hook(struct ipr_cmnd
{
struct ipr_trace_entry *trace_entry;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+ unsigned int trace_index;
- trace_entry = &ioa_cfg->trace[atomic_add_return
- (1, &ioa_cfg->trace_index)%IPR_NUM_TRACE_ENTRIES];
+ trace_index = atomic_add_return(1, &ioa_cfg->trace_index) & IPR_TRACE_INDEX_MASK;
+ trace_entry = &ioa_cfg->trace[trace_index];
trace_entry->time = jiffies;
trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
trace_entry->type = type;
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1486,6 +1486,7 @@ struct ipr_ioa_cfg {
#define IPR_NUM_TRACE_INDEX_BITS 8
#define IPR_NUM_TRACE_ENTRIES (1 << IPR_NUM_TRACE_INDEX_BITS)
+#define IPR_TRACE_INDEX_MASK (IPR_NUM_TRACE_ENTRIES - 1)
#define IPR_TRACE_SIZE (sizeof(struct ipr_trace_entry) * IPR_NUM_TRACE_ENTRIES)
char trace_start[8];
#define IPR_TRACE_START_LABEL "trace"
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit 3f1c0581310d5d94bd72740231507e763a6252a4 upstream.
Fixes another signed / unsigned array indexing bug in the ipr driver.
Currently, when hrrq_index wraps, it becomes a negative number. We
do the modulo, but still have a negative number, so we end up indexing
backwards in the array. Given where the hrrq array is located in memory,
we probably won't actually reference memory we don't own, but nonetheless
ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as
struct ipr_hrr_queue data, so bad things could certainly happen.
Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new
adapters. Let's take an example:
Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4:
The atomic_add_return will then return -1. We mod this with 3 and get -2, add
one and get -1 for an array index.
On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter
initialization and error interrupts so that we can optimize the other queues
for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the
I/O requests across those HRRQs.
With the default module parameter settings, this bug won't hit, only when
someone sets the ipr.number_of_msix parameter to a value larger than 3 is when
bad things start to happen.
Tested-by: Wen Xiong <[email protected]>
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1052,10 +1052,15 @@ static void ipr_send_blocking_cmd(struct
static int ipr_get_hrrq_index(struct ipr_ioa_cfg *ioa_cfg)
{
+ unsigned int hrrq;
+
if (ioa_cfg->hrrq_num == 1)
- return 0;
- else
- return (atomic_add_return(1, &ioa_cfg->hrrq_index) % (ioa_cfg->hrrq_num - 1)) + 1;
+ hrrq = 0;
+ else {
+ hrrq = atomic_add_return(1, &ioa_cfg->hrrq_index);
+ hrrq = (hrrq % (ioa_cfg->hrrq_num - 1)) + 1;
+ }
+ return hrrq;
}
/**
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hedberg <[email protected]>
commit 25ba265390c09b0a2b2f3fd9ba82e37248b7a371 upstream.
The l2cap_conn->smp pointer may be NULL for various valid reasons where SMP has
failed to initialize properly. One such scenario is when crypto support is
missing, another when the adapter has been powered on through a legacy method.
The smp_conn_security() function should have the appropriate check for this
situation to avoid NULL pointer dereferences.
Signed-off-by: Johan Hedberg <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/smp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -2295,6 +2295,10 @@ int smp_conn_security(struct hci_conn *h
return 1;
chan = conn->smp;
+ if (!chan) {
+ BT_ERR("SMP security requested but not available");
+ return 1;
+ }
if (!hci_dev_test_flag(hcon->hdev, HCI_LE_ENABLED))
return 1;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit ae128293d97404f491dc76f1843c7adacfec3441 upstream.
During memcpy operations the residue was always set to an u32 overflowed
value.
In pl330_tx_status() function number of currently transferred bytes was
subtracted from internal "bytes_requested" field. However this
"bytes_requested" was not initialized at start to length of memcpy
buffer so transferred bytes were subtracted from 0 causing overflow.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/pl330.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2621,6 +2621,7 @@ pl330_prep_dma_memcpy(struct dma_chan *c
desc->rqcfg.brst_len = 1;
desc->rqcfg.brst_len = get_burst_len(desc, len);
+ desc->bytes_requested = len;
desc->txd.flags = flags;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 5dd90e5b91e0f5c925b12b132c7cd27538870256 upstream.
When pl330 driver was used during sound playback, after some time or
after a number of plays the sound became choppy or totally noisy. For
example on Odroid XU3 board the first four executions of aplay with
small WAVE worked fine, but fifth was unrecognizable with errors:
$ aplay /usr/share/sounds/alsa/Front_Right.wava
underrun!!! (at least 0.095 ms long)
Issue was caused by wrong residue reported by pl330 driver to
pcm_dmaengine for its cyclic dma transfers.
The pl330_tx_status(), residue reporting function, used a "last" flag in
a descriptor to indicate that there is no more data to send.
The pl330_tx_submit() iterated over descriptors trying to remove this
flag from them and then mark last descriptor as "last". However when
iterating it actually removed the flag not from descriptors but always
from last of it (and then reset it). Thus effectively once some
descriptor was marked as last, then it stayed like this forever causing
residue to be reported too low.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
Reported-by: [email protected]
Suggested-by: Marek Szyprowski <[email protected]>
Tested-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/pl330.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2328,7 +2328,7 @@ static dma_cookie_t pl330_tx_submit(stru
desc->txd.callback = last->txd.callback;
desc->txd.callback_param = last->txd.callback_param;
}
- last->last = false;
+ desc->last = false;
dma_cookie_assign(&desc->txd);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gavin Shan <[email protected]>
commit ffe5adcb7661d94e952d6b5ed7f493cb4ef0c7bc upstream.
When xhci_mem_cleanup() is called, it's possible that the command
timer isn't initialized and scheduled. For those cases, to delete
the command timer causes soft-lockup as below stack dump shows.
The patch avoids deleting the command timer if it's not scheduled
with the help of timer_pending().
NMI watchdog: BUG: soft lockup - CPU#40 stuck for 23s! [kworker/40:1:8140]
:
NIP [c000000000150b30] lock_timer_base.isra.34+0x90/0xa0
LR [c000000000150c24] try_to_del_timer_sync+0x34/0xa0
Call Trace:
[c000000f67c975e0] [c0000000015b84f8] mon_ops+0x0/0x8 (unreliable)
[c000000f67c97620] [c000000000150c24] try_to_del_timer_sync+0x34/0xa0
[c000000f67c97660] [c000000000150cf0] del_timer_sync+0x60/0x80
[c000000f67c97690] [c00000000070ac0c] xhci_mem_cleanup+0x5c/0x5e0
[c000000f67c97740] [c00000000070c2e8] xhci_mem_init+0x1158/0x13b0
[c000000f67c97860] [c000000000700978] xhci_init+0x88/0x110
[c000000f67c978e0] [c000000000701644] xhci_gen_setup+0x2b4/0x590
[c000000f67c97970] [c0000000006d4410] xhci_pci_setup+0x40/0x190
[c000000f67c979f0] [c0000000006b1af8] usb_add_hcd+0x418/0xba0
[c000000f67c97ab0] [c0000000006cb15c] usb_hcd_pci_probe+0x1dc/0x5c0
[c000000f67c97b50] [c0000000006d3ba4] xhci_pci_probe+0x64/0x1f0
[c000000f67c97ba0] [c0000000004fe9ac] local_pci_probe+0x6c/0x130
[c000000f67c97c30] [c0000000000e5ce8] work_for_cpu_fn+0x38/0x60
[c000000f67c97c60] [c0000000000eacb8] process_one_work+0x198/0x470
[c000000f67c97cf0] [c0000000000eb6ac] worker_thread+0x37c/0x5a0
[c000000f67c97d80] [c0000000000f2730] kthread+0x110/0x130
[c000000f67c97e30] [c000000000009660] ret_from_kernel_thread+0x5c/0x7c
Reported-by: Priya M. A <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mem.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *x
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ if (timer_pending(&xhci->cmd_timer))
+ del_timer_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dirk Behme <[email protected]>
commit 74472233233f577eaa0ca6d6e17d9017b6e53150 upstream.
Add support for the Sierra Wireless AR8550 device with
USB descriptor 0x1199, 0x68AB.
It is common with MC879x modules 1199:683c/683d which
also are composite devices with 7 interfaces (0..6)
and also MDM62xx based as the AR8550.
The major difference are only the interface attributes
02/02/01 on interfaces 3 and 4 on the AR8550. They are
vendor specific ff/ff/ff on MC879x modules.
lsusb reports:
Bus 001 Device 004: ID 1199:68ab Sierra Wireless, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x68ab
bcdDevice 0.06
iManufacturer 3 Sierra Wireless, Incorporated
iProduct 2 AR8550
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 198
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 1 Sierra Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8b EP 11 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Signed-off-by: Dirk Behme <[email protected]>
Cc: Lars Melin <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/sierra.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit c93e64e91248becd0edb8f01723dff9da890e2ab upstream.
This patch fixes a bug in the error pathway of
usb_add_gadget_udc_release() in udc-core.c. If the udc registration
fails, the gadget registration is not fully undone; there's a
put_device(&gadget->dev) call but no device_del().
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/udc-core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -321,6 +321,7 @@ err4:
err3:
put_device(&udc->dev);
+ device_del(&gadget->dev);
err2:
put_device(&gadget->dev);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit 2f01a33bd26545c16fea7592697f7f15c416402b upstream.
The ehci_init_driver is used to initialize hcd APIs for each
ehci controller driver, it is designed to be called only one time
and before driver register is called. The current design will
cause ehci_init_driver is called multiple times at probe process,
it will cause hc_driver's initialization affect current running hcd.
We run out NULL pointer dereference problem when one hcd is started
by module_init, and the other is started by otg thread at SMP platform.
The reason for this problem is ehci_init_driver will do memory copy
for current uniform hc_driver, and this memory copy will do memset (as 0)
first, so when the first hcd is running usb_add_hcd, and the second
hcd may clear the uniform hc_driver's space (at ehci_init_driver),
then the first hcd will meet NULL pointer at the same time.
See below two logs:
LOG_1:
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: doesn't support gadget
Unable to handle kernel NULL pointer dereference at virtual address 00000014
pgd = 80004000
[00000014] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-222193-g24b2734-dirty #25
Workqueue: ci_otg ci_otg_work
task: d839ec00 ti: d8400000 task.ti: d8400000
PC is at ehci_run+0x4c/0x284
LR is at _raw_spin_unlock_irqrestore+0x28/0x54
pc : [<8041f9a0>] lr : [<8070ea84>] psr: 60000113
sp : d8401e30 ip : 00000000 fp : d8004400
r10: 00000001 r9 : 00000001 r8 : 00000000
r7 : 00000000 r6 : d8419940 r5 : 80dd24c0 r4 : d8419800
r3 : 8001d060 r2 : 00000000 r1 : 00000001 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 1000404a DAC: 00000015
Process kworker/u8:2 (pid: 108, stack limit = 0xd8400238)
Stack: (0xd8401e30 to 0xd8402000)
1e20: d87523c0 d8401e48 66667562 d8419800
1e40: 00000000 00000000 d8419800 00000000 00000000 00000000 d84198b0 8040fcdc
1e60: 00000000 80dd320c d8477610 d8419c00 d803d010 d8419800 00000000 00000000
1e80: d8004400 00000000 d8400008 80431494 80431374 d803d100 d803d010 d803d1ac
1ea0: 00000000 80432428 804323d4 d803d100 00000001 80435eb8 80e0d0bc d803d100
1ec0: 00000006 80436458 00000000 d803d100 80e92ec8 80436f44 d803d010 d803d100
1ee0: d83fde00 8043292c d8752710 d803d1f4 d803d010 8042ddfc 8042ddb8 d83f3b00
1f00: d803d1f4 80042b60 00000000 00000003 00000001 00000001 80054598 d83f3b00
1f20: d8004400 d83f3b18 d8004414 d8400000 80e3957b 00000089 d8004400 80043814
1f40: d839ec00 00000000 d83fcd80 d83f3b00 800436e4 00000000 00000000 00000000
1f60: 00000000 80048f34 00000000 00000000 00000000 d83f3b00 00000000 00000000
1f80: d8401f80 d8401f80 00000000 00000000 d8401f90 d8401f90 d8401fac d83fcd80
1fa0: 80048e68 00000000 00000000 8000e538 00000000 00000000 00000000 00000000
1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<8041f9a0>] (ehci_run) from [<8040fcdc>] (usb_add_hcd+0x248/0x6e8)
[<8040fcdc>] (usb_add_hcd) from [<80431494>] (host_start+0x120/0x2e4)
[<80431494>] (host_start) from [<80432428>] (ci_otg_start_host+0x54/0xbc)
[<80432428>] (ci_otg_start_host) from [<80435eb8>] (otg_set_protocol+0xa4/0xd0)
[<80435eb8>] (otg_set_protocol) from [<80436458>] (otg_set_state+0x574/0xc58)
[<80436458>] (otg_set_state) from [<80436f44>] (otg_statemachine+0x408/0x46c)
[<80436f44>] (otg_statemachine) from [<8043292c>] (ci_otg_fsm_work+0x3c/0x190)
[<8043292c>] (ci_otg_fsm_work) from [<8042ddfc>] (ci_otg_work+0x44/0x1c4)
[<8042ddfc>] (ci_otg_work) from [<80042b60>] (process_one_work+0xf4/0x35c)
[<80042b60>] (process_one_work) from [<80043814>] (worker_thread+0x130/0x3bc)
[<80043814>] (worker_thread) from [<80048f34>] (kthread+0xcc/0xe4)
[<80048f34>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c)
Code: e5953018 e3530000 0a000000 e12fff33 (e5878014)
LOG_2:
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: doesn't support gadget
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = 80004000
[00000000] *pgd=00000000
In Online 00:00ternal e Offline rror: Oops: 80000005 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-02007-g24b2734-dirty #127
Workque Online 00:00ue: ci_o Offline tg ci_otg_work
Online 00:00task: d8 Offline 39ec00 ti: d83ea000 task.ti: d83ea000
PC is at 0x0
LR is at usb_add_hcd+0x248/0x6e8
pc : [<00000000>] lr : [<8040f644>] psr: 60000113
sp : d83ebe60 ip : 00000000 fp : d8004400
r10: 00000001 r9 : 00000001 r8 : d85fd4b0
r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : d85fd400
r3 : 00000000 r2 : d85fd4f4 r1 : 80410178 r0 : d85fd400
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 1000404a DAC: 00000015
Process kworker/u8:2 (pid: 108, stack limit = 0xd83ea238)
Stack: (0xd83ebe60 to 0xd83ec000)
be60: 00000000 80dd920c d8654e10 d85fd800 d803e010 d85fd400 00000000 00000000
be80: d8004400 00000000 d83ea008 80430e34 80430d14 d803e100 d803e010 d803e1ac
bea0: 00000000 80431dc8 80431d74 d803e100 00000001 80435858 80e130bc d803e100
bec0: 00000006 80435df8 00000000 d803e100 80e98ec8 804368e4 d803e010 d803e100
bee0: d86e8100 804322cc d86cf050 d803e1f4 d803e010 8042d79c 8042d758 d83cf900
bf00: d803e1f4 80042b78 00000000 00000003 00000001 00000001 800545e8 d83cf900
bf20: d8004400 d83cf918 d8004414 d83ea000 80e3f57b 00000089 d8004400 8004382c
bf40: d839ec00 00000000 d8393780 d83cf900 800436fc 00000000 00000000 00000000
bf60: 00000000 80048f50 80e019f4 00000000 0000264c d83cf900 00000000 00000000
bf80: d83ebf80 d83ebf80 00000000 00000000 d83ebf90 d83ebf90 d83ebfac d8393780
bfa0: 80048e84 00000000 00000000 8000e538 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ee66e85d 133ebd03
[<804 Online 00:000f644>] Offline (usb_add_hcd) from [<80430e34>] (host_start+0x120/0x2e4)
[<80430e34>] (host_start) from [<80431dc8>] (ci_otg_start_host+0x54/0xbc)
[<80431dc8>] (ci_otg_start_host) from [<80435858>] (otg_set_protocol+0xa4/0xd0)
[<80435858>] (otg_set_protocol) from [<80435df8>] (otg_set_state+0x574/0xc58)
[<80435df8>] (otg_set_state) from [<804368e4>] (otg_statemachine+0x408/0x46c)
[<804368e4>] (otg_statemachine) from [<804322cc>] (ci_otg_fsm_work+0x3c/0x190)
[<804322cc>] (ci_otg_fsm_work) from [<8042d79c>] (ci_otg_work+0x44/0x1c4)
[<8042d79c>] (ci_otg_work) from [<80042b78>] (process_one_work+0xf4/0x35c)
[<80042b78>] (process_one_work) from [<8004382c>] (worker_thread+0x130/0x3bc)
[<8004382c>] (worker_thread) from [<80048f50>] (kthread+0xcc/0xe4)
[<80048f50>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c)
Code: bad PC value
Cc: Jun Li <[email protected]>
Cc: Alan Stern <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/core.c | 13 ++++++++++++-
drivers/usb/chipidea/host.c | 7 +++++--
drivers/usb/chipidea/host.h | 6 ++++++
3 files changed, 23 insertions(+), 3 deletions(-)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1024,7 +1024,18 @@ static struct platform_driver ci_hdrc_dr
},
};
-module_platform_driver(ci_hdrc_driver);
+static int __init ci_hdrc_platform_register(void)
+{
+ ci_hdrc_host_driver_init();
+ return platform_driver_register(&ci_hdrc_driver);
+}
+module_init(ci_hdrc_platform_register);
+
+static void __exit ci_hdrc_platform_unregister(void)
+{
+ platform_driver_unregister(&ci_hdrc_driver);
+}
+module_exit(ci_hdrc_platform_unregister);
MODULE_ALIAS("platform:ci_hdrc");
MODULE_LICENSE("GPL v2");
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -237,9 +237,12 @@ int ci_hdrc_host_init(struct ci_hdrc *ci
rdrv->name = "host";
ci->roles[CI_ROLE_HOST] = rdrv;
+ return 0;
+}
+
+void ci_hdrc_host_driver_init(void)
+{
ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
-
- return 0;
}
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -5,6 +5,7 @@
int ci_hdrc_host_init(struct ci_hdrc *ci);
void ci_hdrc_host_destroy(struct ci_hdrc *ci);
+void ci_hdrc_host_driver_init(void);
#else
@@ -17,6 +18,11 @@ static inline void ci_hdrc_host_destroy(
{
}
+
+static void ci_hdrc_host_driver_init(void)
+{
+
+}
#endif
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 56301df6bcaaed31e77b8c500ca1b437f46a3158 upstream.
A construct like:
if (pm_runtime_suspended(twl->dev))
pm_runtime_get_sync(twl->dev);
is against the spirit of the runtime_pm interface as it
makes the internal refcounting useless.
In this case it is also racy, particularly as 'put_autosuspend'
is used to drop a reference.
When that happens a timer is started and the device is
runtime-suspended after the timeout.
If the above code runs in this window, the device will not be
found to be suspended so no pm_runtime reference is taken.
When the timer expires the device will be suspended, which is
against the intention of the code.
So be more direct is taking and dropping references.
If twl->linkstat is VBUS_VALID or ID_GROUND, then hold a
pm_runtime reference, otherwise don't.
Define "cable_present()" to test for this condition.
Tested-by: Tony Lindgren <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Cc: Alexander Holler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/phy-twl4030-usb.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -144,6 +144,16 @@
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
+/*
+ * If VBUS is valid or ID is ground, then we know a
+ * cable is present and we need to be runtime-enabled
+ */
+static inline bool cable_present(enum omap_musb_vbus_id_status stat)
+{
+ return stat == OMAP_MUSB_VBUS_VALID ||
+ stat == OMAP_MUSB_ID_GROUND;
+}
+
struct twl4030_usb {
struct usb_phy phy;
struct device *dev;
@@ -536,8 +546,10 @@ static irqreturn_t twl4030_usb_irq(int i
mutex_lock(&twl->lock);
if (status >= 0 && status != twl->linkstat) {
+ status_changed =
+ cable_present(twl->linkstat) !=
+ cable_present(status);
twl->linkstat = status;
- status_changed = true;
}
mutex_unlock(&twl->lock);
@@ -553,15 +565,11 @@ static irqreturn_t twl4030_usb_irq(int i
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
- if ((status == OMAP_MUSB_VBUS_VALID) ||
- (status == OMAP_MUSB_ID_GROUND)) {
- if (pm_runtime_suspended(twl->dev))
- pm_runtime_get_sync(twl->dev);
+ if (cable_present(status)) {
+ pm_runtime_get_sync(twl->dev);
} else {
- if (pm_runtime_active(twl->dev)) {
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
- }
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
}
omap_musb_mailbox(status);
}
@@ -766,6 +774,9 @@ static int twl4030_usb_remove(struct pla
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+
+ if (cable_present(twl->linkstat))
+ pm_runtime_put_noidle(twl->dev);
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put(twl->dev);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Randazzo <[email protected]>
commit b6878d9e03043695dbf3fa1caa6dfc09db225b16 upstream.
In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a
mdu_bitmap_file_t called "file".
5769 file = kmalloc(sizeof(*file), GFP_NOIO);
5770 if (!file)
5771 return -ENOMEM;
This structure is copied to user space at the end of the function.
5786 if (err == 0 &&
5787 copy_to_user(arg, file, sizeof(*file)))
5788 err = -EFAULT
But if bitmap is disabled only the first byte of "file" is initialized
with zero, so it's possible to read some bytes (up to 4095) of kernel
space memory from user space. This is an information leak.
5775 /* bitmap disabled, zero the first byte and copy out */
5776 if (!mddev->bitmap_info.file)
5777 file->pathname[0] = '\0';
Signed-off-by: Benjamin Randazzo <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5740,7 +5740,7 @@ static int get_bitmap_file(struct mddev
char *ptr;
int err;
- file = kmalloc(sizeof(*file), GFP_NOIO);
+ file = kzalloc(sizeof(*file), GFP_NOIO);
if (!file)
return -ENOMEM;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Kazior <[email protected]>
commit 11a002efbaa7fbd9f6e616695ab42aa9f1caf060 upstream.
During initialization firmware does some sort of
memory switch between DRAM and IRAM. If
configuration value for bank switching isn't
correct device crashes during init.
The new value prevents firmware 11.0.0.302 (and
possibly others) for qca61x4 hw2.1 from crashing
during init.
Signed-off-by: Michal Kazior <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/pci.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1524,12 +1524,11 @@ static int ath10k_pci_get_num_banks(stru
switch (MS(ar->chip_id, SOC_CHIP_ID_REV)) {
case QCA6174_HW_1_0_CHIP_ID_REV:
case QCA6174_HW_1_1_CHIP_ID_REV:
+ case QCA6174_HW_2_1_CHIP_ID_REV:
+ case QCA6174_HW_2_2_CHIP_ID_REV:
return 3;
case QCA6174_HW_1_3_CHIP_ID_REV:
return 2;
- case QCA6174_HW_2_1_CHIP_ID_REV:
- case QCA6174_HW_2_2_CHIP_ID_REV:
- return 6;
case QCA6174_HW_3_0_CHIP_ID_REV:
case QCA6174_HW_3_1_CHIP_ID_REV:
case QCA6174_HW_3_2_CHIP_ID_REV:
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 5ca6f70f387b4f82903037cc3c5488e2c97dcdbc upstream.
INTERRUPT_RETURN turns into a jmp instruction. There's no need
for extra indirection.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/2f2318653dbad284a59311f13f08cea71298fd7c.1433449436.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -793,8 +793,6 @@ retint_kernel:
restore_c_regs_and_iret:
RESTORE_C_REGS
REMOVE_PT_GPREGS_FROM_STACK 8
-
-irq_return:
INTERRUPT_RETURN
ENTRY(native_iret)
@@ -1640,7 +1638,7 @@ nmi_restore:
/* Clear the NMI executing stack variable */
movq $0, 5*8(%rsp)
- jmp irq_return
+ INTERRUPT_RETURN
CFI_ENDPROC
END(nmi)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 9d05041679904b12c12421cbcf9cb5f4860a8d7b upstream.
32-bit kernels handle nested NMIs in C. Enable the exact same
handling on 64-bit kernels as well. This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/nmi.c | 125 +++++++++++++++++++++-----------------------------
1 file changed, 53 insertions(+), 72 deletions(-)
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -408,15 +408,15 @@ static void default_do_nmi(struct pt_reg
NOKPROBE_SYMBOL(default_do_nmi);
/*
- * NMIs can hit breakpoints which will cause it to lose its
- * NMI context with the CPU when the breakpoint does an iret.
- */
-#ifdef CONFIG_X86_32
-/*
- * For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C (preventing nested
- * NMIs if an NMI takes a trap). Simply have 3 states the NMI
- * can be in:
+ * NMIs can hit breakpoints which will cause it to lose its NMI context
+ * with the CPU when the breakpoint or page fault does an IRET.
+ *
+ * As a result, NMIs can nest if NMIs get unmasked due an IRET during
+ * NMI processing. On x86_64, the asm glue protects us from nested NMIs
+ * if the outer NMI came from kernel mode, but we can still nest if the
+ * outer NMI came from user mode.
+ *
+ * To handle these nested NMIs, we have three states:
*
* 1) not running
* 2) executing
@@ -430,15 +430,14 @@ NOKPROBE_SYMBOL(default_do_nmi);
* (Note, the latch is binary, thus multiple NMIs triggering,
* when one is running, are ignored. Only one NMI is restarted.)
*
- * If an NMI hits a breakpoint that executes an iret, another
- * NMI can preempt it. We do not want to allow this new NMI
- * to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the exit of the first NMI will
- * perform a dec_return, if the result is zero (NOT_RUNNING), then
- * it will simply exit the NMI handler. If not, the dec_return
- * would have set the state to NMI_EXECUTING (what we want it to
- * be when we are running). In this case, we simply jump back
- * to rerun the NMI handler again, and restart the 'latched' NMI.
+ * If an NMI executes an iret, another NMI can preempt it. We do not
+ * want to allow this new NMI to run, but we want to execute it when the
+ * first one finishes. We set the state to "latched", and the exit of
+ * the first NMI will perform a dec_return, if the result is zero
+ * (NOT_RUNNING), then it will simply exit the NMI handler. If not, the
+ * dec_return would have set the state to NMI_EXECUTING (what we want it
+ * to be when we are running). In this case, we simply jump back to
+ * rerun the NMI handler again, and restart the 'latched' NMI.
*
* No trap (breakpoint or page fault) should be hit before nmi_restart,
* thus there is no race between the first check of state for NOT_RUNNING
@@ -461,49 +460,36 @@ enum nmi_states {
static DEFINE_PER_CPU(enum nmi_states, nmi_state);
static DEFINE_PER_CPU(unsigned long, nmi_cr2);
-#define nmi_nesting_preprocess(regs) \
- do { \
- if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { \
- this_cpu_write(nmi_state, NMI_LATCHED); \
- return; \
- } \
- this_cpu_write(nmi_state, NMI_EXECUTING); \
- this_cpu_write(nmi_cr2, read_cr2()); \
- } while (0); \
- nmi_restart:
-
-#define nmi_nesting_postprocess() \
- do { \
- if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) \
- write_cr2(this_cpu_read(nmi_cr2)); \
- if (this_cpu_dec_return(nmi_state)) \
- goto nmi_restart; \
- } while (0)
-#else /* x86_64 */
+#ifdef CONFIG_X86_64
/*
- * In x86_64 things are a bit more difficult. This has the same problem
- * where an NMI hitting a breakpoint that calls iret will remove the
- * NMI context, allowing a nested NMI to enter. What makes this more
- * difficult is that both NMIs and breakpoints have their own stack.
- * When a new NMI or breakpoint is executed, the stack is set to a fixed
- * point. If an NMI is nested, it will have its stack set at that same
- * fixed address that the first NMI had, and will start corrupting the
- * stack. This is handled in entry_64.S, but the same problem exists with
- * the breakpoint stack.
- *
- * If a breakpoint is being processed, and the debug stack is being used,
- * if an NMI comes in and also hits a breakpoint, the stack pointer
- * will be set to the same fixed address as the breakpoint that was
- * interrupted, causing that stack to be corrupted. To handle this case,
- * check if the stack that was interrupted is the debug stack, and if
- * so, change the IDT so that new breakpoints will use the current stack
- * and not switch to the fixed address. On return of the NMI, switch back
- * to the original IDT.
+ * In x86_64, we need to handle breakpoint -> NMI -> breakpoint. Without
+ * some care, the inner breakpoint will clobber the outer breakpoint's
+ * stack.
+ *
+ * If a breakpoint is being processed, and the debug stack is being
+ * used, if an NMI comes in and also hits a breakpoint, the stack
+ * pointer will be set to the same fixed address as the breakpoint that
+ * was interrupted, causing that stack to be corrupted. To handle this
+ * case, check if the stack that was interrupted is the debug stack, and
+ * if so, change the IDT so that new breakpoints will use the current
+ * stack and not switch to the fixed address. On return of the NMI,
+ * switch back to the original IDT.
*/
static DEFINE_PER_CPU(int, update_debug_stack);
+#endif
-static inline void nmi_nesting_preprocess(struct pt_regs *regs)
+dotraplinkage notrace void
+do_nmi(struct pt_regs *regs, long error_code)
{
+ if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {
+ this_cpu_write(nmi_state, NMI_LATCHED);
+ return;
+ }
+ this_cpu_write(nmi_state, NMI_EXECUTING);
+ this_cpu_write(nmi_cr2, read_cr2());
+nmi_restart:
+
+#ifdef CONFIG_X86_64
/*
* If we interrupted a breakpoint, it is possible that
* the nmi handler will have breakpoints too. We need to
@@ -514,22 +500,8 @@ static inline void nmi_nesting_preproces
debug_stack_set_zero();
this_cpu_write(update_debug_stack, 1);
}
-}
-
-static inline void nmi_nesting_postprocess(void)
-{
- if (unlikely(this_cpu_read(update_debug_stack))) {
- debug_stack_reset();
- this_cpu_write(update_debug_stack, 0);
- }
-}
#endif
-dotraplinkage notrace void
-do_nmi(struct pt_regs *regs, long error_code)
-{
- nmi_nesting_preprocess(regs);
-
nmi_enter();
inc_irq_stat(__nmi_count);
@@ -539,8 +511,17 @@ do_nmi(struct pt_regs *regs, long error_
nmi_exit();
- /* On i386, may loop back to preprocess */
- nmi_nesting_postprocess();
+#ifdef CONFIG_X86_64
+ if (unlikely(this_cpu_read(update_debug_stack))) {
+ debug_stack_reset();
+ this_cpu_write(update_debug_stack, 0);
+ }
+#endif
+
+ if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))
+ write_cr2(this_cpu_read(nmi_cr2));
+ if (this_cpu_dec_return(nmi_state))
+ goto nmi_restart;
}
NOKPROBE_SYMBOL(do_nmi);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 0e181bb58143cb4a2e8f01c281b0816cd0e4798e upstream.
Now that do_nmi saves CR2, we don't need to save it in asm.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 18 ------------------
1 file changed, 18 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1603,29 +1603,11 @@ end_repeat_nmi:
call paranoid_entry
DEFAULT_FRAME 0
- /*
- * Save off the CR2 register. If we take a page fault in the NMI then
- * it could corrupt the CR2 value. If the NMI preempts a page fault
- * handler before it was able to read the CR2 register, and then the
- * NMI itself takes a page fault, the page fault that was preempted
- * will read the information from the NMI page fault and not the
- * origin fault. Save it off and restore it if it changes.
- * Use the r12 callee-saved register.
- */
- movq %cr2, %r12
-
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
movq %rsp,%rdi
movq $-1,%rsi
call do_nmi
- /* Did the NMI take a page fault? Restore cr2 if it did */
- movq %cr2, %rcx
- cmpq %rcx, %r12
- je 1f
- movq %r12, %cr2
-1:
-
testl %ebx,%ebx /* swapgs needed? */
jnz nmi_restore
nmi_swapgs:
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a upstream.
Returning to userspace is tricky: IRET can fail, and ESPFIX can
rearrange the stack prior to IRET.
The NMI nesting fixup relies on a precise stack layout and
atomic IRET. Rather than trying to teach the NMI nesting fixup
to handle ESPFIX and failed IRET, punt: run NMIs that came from
user mode on the normal kernel stack.
This will make some nested NMIs visible to C code, but the C
code is okay with that.
As a side effect, this should speed up perf: it eliminates an
RDMSR when NMIs come from user mode.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 61 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 4 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1424,19 +1424,72 @@ ENTRY(nmi)
* a nested NMI that updated the copy interrupt stack frame, a
* jump will be made to the repeat_nmi code that will handle the second
* NMI.
+ *
+ * However, espfix prevents us from directly returning to userspace
+ * with a single IRET instruction. Similarly, IRET to user mode
+ * can fault. We therefore handle NMIs from user space like
+ * other IST entries.
*/
/* Use %rdx as our temp variable throughout */
pushq_cfi %rdx
CFI_REL_OFFSET rdx, 0
+ testb $3, CS-RIP+8(%rsp)
+ jz .Lnmi_from_kernel
+
+ /*
+ * NMI from user mode. We need to run on the thread stack, but we
+ * can't go through the normal entry paths: NMIs are masked, and
+ * we don't want to enable interrupts, because then we'll end
+ * up in an awkward situation in which IRQs are on but NMIs
+ * are off.
+ */
+
+ SWAPGS
+ cld
+ movq %rsp, %rdx
+ movq PER_CPU_VAR(kernel_stack), %rsp
+ pushq 5*8(%rdx) /* pt_regs->ss */
+ pushq 4*8(%rdx) /* pt_regs->rsp */
+ pushq 3*8(%rdx) /* pt_regs->flags */
+ pushq 2*8(%rdx) /* pt_regs->cs */
+ pushq 1*8(%rdx) /* pt_regs->rip */
+ pushq $-1 /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq (%rdx) /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq %rax /* pt_regs->ax */
+ pushq %r8 /* pt_regs->r8 */
+ pushq %r9 /* pt_regs->r9 */
+ pushq %r10 /* pt_regs->r10 */
+ pushq %r11 /* pt_regs->r11 */
+ pushq %rbx /* pt_regs->rbx */
+ pushq %rbp /* pt_regs->rbp */
+ pushq %r12 /* pt_regs->r12 */
+ pushq %r13 /* pt_regs->r13 */
+ pushq %r14 /* pt_regs->r14 */
+ pushq %r15 /* pt_regs->r15 */
+
+ /*
+ * At this point we no longer need to worry about stack damage
+ * due to nesting -- we're on the normal thread stack and we're
+ * done with the NMI stack.
+ */
+ movq %rsp, %rdi
+ movq $-1, %rsi
+ call do_nmi
+
/*
- * If %cs was not the kernel segment, then the NMI triggered in user
- * space, which means it is definitely not nested.
+ * Return back to user mode. We must *not* do the normal exit
+ * work, because we don't want to enable interrupts. Fortunately,
+ * do_nmi doesn't modify pt_regs.
*/
- cmpl $__KERNEL_CS, 16(%rsp)
- jne first_nmi
+ SWAPGS
+ jmp restore_c_regs_and_iret
+.Lnmi_from_kernel:
/*
* Check the special variable on the stack to see if NMIs are
* executing.
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 0b22930ebad563ae97ff3f8d7b9f12060b4c6e6b upstream.
I found the nested NMI documentation to be difficult to follow.
Improve the comments.
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 160 +++++++++++++++++++++++++--------------------
arch/x86/kernel/nmi.c | 4 -
2 files changed, 94 insertions(+), 70 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1411,11 +1411,12 @@ ENTRY(nmi)
* If the variable is not set and the stack is not the NMI
* stack then:
* o Set the special variable on the stack
- * o Copy the interrupt frame into a "saved" location on the stack
- * o Copy the interrupt frame into a "copy" location on the stack
+ * o Copy the interrupt frame into an "outermost" location on the
+ * stack
+ * o Copy the interrupt frame into an "iret" location on the stack
* o Continue processing the NMI
* If the variable is set or the previous stack is the NMI stack:
- * o Modify the "copy" location to jump to the repeate_nmi
+ * o Modify the "iret" location to jump to the repeat_nmi
* o return back to the first NMI
*
* Now on exit of the first NMI, we first clear the stack variable
@@ -1491,18 +1492,60 @@ ENTRY(nmi)
.Lnmi_from_kernel:
/*
- * Check the special variable on the stack to see if NMIs are
- * executing.
+ * Here's what our stack frame will look like:
+ * +---------------------------------------------------------+
+ * | original SS |
+ * | original Return RSP |
+ * | original RFLAGS |
+ * | original CS |
+ * | original RIP |
+ * +---------------------------------------------------------+
+ * | temp storage for rdx |
+ * +---------------------------------------------------------+
+ * | "NMI executing" variable |
+ * +---------------------------------------------------------+
+ * | iret SS } Copied from "outermost" frame |
+ * | iret Return RSP } on each loop iteration; overwritten |
+ * | iret RFLAGS } by a nested NMI to force another |
+ * | iret CS } iteration if needed. |
+ * | iret RIP } |
+ * +---------------------------------------------------------+
+ * | outermost SS } initialized in first_nmi; |
+ * | outermost Return RSP } will not be changed before |
+ * | outermost RFLAGS } NMI processing is done. |
+ * | outermost CS } Copied to "iret" frame on each |
+ * | outermost RIP } iteration. |
+ * +---------------------------------------------------------+
+ * | pt_regs |
+ * +---------------------------------------------------------+
+ *
+ * The "original" frame is used by hardware. Before re-enabling
+ * NMIs, we need to be done with it, and we need to leave enough
+ * space for the asm code here.
+ *
+ * We return by executing IRET while RSP points to the "iret" frame.
+ * That will either return for real or it will loop back into NMI
+ * processing.
+ *
+ * The "outermost" frame is copied to the "iret" frame on each
+ * iteration of the loop, so each iteration starts with the "iret"
+ * frame pointing to the final return target.
+ */
+
+ /*
+ * Determine whether we're a nested NMI.
+ *
+ * First check "NMI executing". If it's set, then we're nested.
+ * This will not detect if we interrupted an outer NMI just
+ * before IRET.
*/
cmpl $1, -8(%rsp)
je nested_nmi
/*
- * Now test if the previous stack was an NMI stack.
- * We need the double check. We check the NMI stack to satisfy the
- * race when the first NMI clears the variable before returning.
- * We check the variable because the first NMI could be in a
- * breakpoint routine using a breakpoint stack.
+ * Now test if the previous stack was an NMI stack. This covers
+ * the case where we interrupt an outer NMI after it clears
+ * "NMI executing" but before IRET.
*/
lea 6*8(%rsp), %rdx
/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
@@ -1519,9 +1562,11 @@ ENTRY(nmi)
nested_nmi:
/*
- * Do nothing if we interrupted the fixup in repeat_nmi.
- * It's about to repeat the NMI handler, so we are fine
- * with ignoring this one.
+ * If we interrupted an NMI that is between repeat_nmi and
+ * end_repeat_nmi, then we must not modify the "iret" frame
+ * because it's being written by the outer NMI. That's okay;
+ * the outer NMI handler is about to call do_nmi anyway,
+ * so we can just resume the outer NMI.
*/
movq $repeat_nmi, %rdx
cmpq 8(%rsp), %rdx
@@ -1531,7 +1576,10 @@ nested_nmi:
ja nested_nmi_out
1:
- /* Set up the interrupted NMIs stack to jump to repeat_nmi */
+ /*
+ * Modify the "iret" frame to point to repeat_nmi, forcing another
+ * iteration of NMI handling.
+ */
leaq -1*8(%rsp), %rdx
movq %rdx, %rsp
CFI_ADJUST_CFA_OFFSET 1*8
@@ -1550,60 +1598,23 @@ nested_nmi_out:
popq_cfi %rdx
CFI_RESTORE rdx
- /* No need to check faults here */
+ /* We are returning to kernel mode, so this cannot result in a fault. */
INTERRUPT_RETURN
CFI_RESTORE_STATE
first_nmi:
- /*
- * Because nested NMIs will use the pushed location that we
- * stored in rdx, we must keep that space available.
- * Here's what our stack frame will look like:
- * +-------------------------+
- * | original SS |
- * | original Return RSP |
- * | original RFLAGS |
- * | original CS |
- * | original RIP |
- * +-------------------------+
- * | temp storage for rdx |
- * +-------------------------+
- * | NMI executing variable |
- * +-------------------------+
- * | copied SS |
- * | copied Return RSP |
- * | copied RFLAGS |
- * | copied CS |
- * | copied RIP |
- * +-------------------------+
- * | Saved SS |
- * | Saved Return RSP |
- * | Saved RFLAGS |
- * | Saved CS |
- * | Saved RIP |
- * +-------------------------+
- * | pt_regs |
- * +-------------------------+
- *
- * The saved stack frame is used to fix up the copied stack frame
- * that a nested NMI may change to make the interrupted NMI iret jump
- * to the repeat_nmi. The original stack frame and the temp storage
- * is also used by nested NMIs and can not be trusted on exit.
- */
- /* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+ /* Restore rdx. */
movq (%rsp), %rdx
CFI_RESTORE rdx
- /* Set the NMI executing variable on the stack. */
+ /* Set "NMI executing" on the stack. */
pushq_cfi $1
- /*
- * Leave room for the "copied" frame
- */
+ /* Leave room for the "iret" frame */
subq $(5*8), %rsp
CFI_ADJUST_CFA_OFFSET 5*8
- /* Copy the stack frame to the Saved frame */
+ /* Copy the "original" frame to the "outermost" frame */
.rept 5
pushq_cfi 11*8(%rsp)
.endr
@@ -1611,6 +1622,7 @@ first_nmi:
/* Everything up to here is safe from nested NMIs */
+repeat_nmi:
/*
* If there was a nested NMI, the first NMI's iret will return
* here. But NMIs are still enabled and we can take another
@@ -1619,16 +1631,21 @@ first_nmi:
* it will just return, as we are about to repeat an NMI anyway.
* This makes it safe to copy to the stack frame that a nested
* NMI will update.
- */
-repeat_nmi:
- /*
- * Update the stack variable to say we are still in NMI (the update
- * is benign for the non-repeat case, where 1 was pushed just above
- * to this very stack slot).
+ *
+ * RSP is pointing to "outermost RIP". gsbase is unknown, but, if
+ * we're repeating an NMI, gsbase has the same value that it had on
+ * the first iteration. paranoid_entry will load the kernel
+ * gsbase if needed before we call do_nmi.
+ *
+ * Set "NMI executing" in case we came back here via IRET.
*/
movq $1, 10*8(%rsp)
- /* Make another copy, this one may be modified by nested NMIs */
+ /*
+ * Copy the "outermost" frame to the "iret" frame. NMIs that nest
+ * here must not modify the "iret" frame while we're writing to
+ * it or it will end up containing garbage.
+ */
addq $(10*8), %rsp
CFI_ADJUST_CFA_OFFSET -10*8
.rept 5
@@ -1639,9 +1656,9 @@ repeat_nmi:
end_repeat_nmi:
/*
- * Everything below this point can be preempted by a nested
- * NMI if the first NMI took an exception and reset our iret stack
- * so that we repeat another NMI.
+ * Everything below this point can be preempted by a nested NMI.
+ * If this happens, then the inner NMI will change the "iret"
+ * frame to point back to repeat_nmi.
*/
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
ALLOC_PT_GPREGS_ON_STACK
@@ -1668,11 +1685,18 @@ nmi_swapgs:
nmi_restore:
RESTORE_EXTRA_REGS
RESTORE_C_REGS
- /* Pop the extra iret frame at once */
+
+ /* Point RSP at the "iret" frame. */
REMOVE_PT_GPREGS_FROM_STACK 6*8
- /* Clear the NMI executing stack variable */
+ /* Clear "NMI executing". */
movq $0, 5*8(%rsp)
+
+ /*
+ * INTERRUPT_RETURN reads the "iret" frame and exits the NMI
+ * stack in a single instruction. We are returning to kernel
+ * mode, so this cannot result in a fault.
+ */
INTERRUPT_RETURN
CFI_ENDPROC
END(nmi)
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -408,8 +408,8 @@ static void default_do_nmi(struct pt_reg
NOKPROBE_SYMBOL(default_do_nmi);
/*
- * NMIs can hit breakpoints which will cause it to lose its NMI context
- * with the CPU when the breakpoint or page fault does an IRET.
+ * NMIs can page fault or hit breakpoints which will cause it to lose
+ * its NMI context with the CPU when the breakpoint or page fault does an IRET.
*
* As a result, NMIs can nest if NMIs get unmasked due an IRET during
* NMI processing. On x86_64, the asm glue protects us from nested NMIs
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit a27507ca2d796cfa8d907de31ad730359c8a6d06 upstream.
Check the repeat_nmi .. end_repeat_nmi special case first. The
next patch will rework the RSP check and, as a side effect, the
RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so
we'll need this ordering of the checks.
Note: this is more subtle than it appears. The check for
repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code
instead of adjusting the "iret" frame to force a repeat. This
is necessary, because the code between repeat_nmi and
end_repeat_nmi sets "NMI executing" and then writes to the
"iret" frame itself. If a nested NMI comes in and modifies the
"iret" frame while repeat_nmi is also modifying it, we'll end up
with garbage. The old code got this right, as does the new
code, but the new code is a bit more explicit.
If we were to move the check right after the "NMI executing"
check, then we'd get it wrong and have random crashes.
( Because the "NMI executing" check would jump to the code that would
modify the "iret" frame without checking if the interrupted NMI was
currently modifying it. )
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1535,7 +1535,24 @@ ENTRY(nmi)
/*
* Determine whether we're a nested NMI.
*
- * First check "NMI executing". If it's set, then we're nested.
+ * If we interrupted kernel code between repeat_nmi and
+ * end_repeat_nmi, then we are a nested NMI. We must not
+ * modify the "iret" frame because it's being written by
+ * the outer NMI. That's okay; the outer NMI handler is
+ * about to about to call do_nmi anyway, so we can just
+ * resume the outer NMI.
+ */
+
+ movq $repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja 1f
+ movq $end_repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja nested_nmi_out
+1:
+
+ /*
+ * Now check "NMI executing". If it's set, then we're nested.
* This will not detect if we interrupted an outer NMI just
* before IRET.
*/
@@ -1562,21 +1579,6 @@ ENTRY(nmi)
nested_nmi:
/*
- * If we interrupted an NMI that is between repeat_nmi and
- * end_repeat_nmi, then we must not modify the "iret" frame
- * because it's being written by the outer NMI. That's okay;
- * the outer NMI handler is about to call do_nmi anyway,
- * so we can just resume the outer NMI.
- */
- movq $repeat_nmi, %rdx
- cmpq 8(%rsp), %rdx
- ja 1f
- movq $end_repeat_nmi, %rdx
- cmpq 8(%rsp), %rdx
- ja nested_nmi_out
-
-1:
- /*
* Modify the "iret" frame to point to repeat_nmi, forcing another
* iteration of NMI handling.
*/
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 810bc075f78ff2c221536eb3008eac6a492dba2d upstream.
We have a tricky bug in the nested NMI code: if we see RSP
pointing to the NMI stack on NMI entry from kernel mode, we
assume that we are executing a nested NMI.
This isn't quite true. A malicious userspace program can point
RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to
happen while RSP is still pointing at the NMI stack.
Fix it with a sneaky trick. Set DF in the region of code that
the RSP check is intended to detect. IRET will clear DF
atomically.
( Note: other than paravirt, there's little need for all this
complexity. We could check RIP instead of RSP. )
Signed-off-by: Andy Lutomirski <[email protected]>
Reviewed-by: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/entry_64.S | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1562,7 +1562,14 @@ ENTRY(nmi)
/*
* Now test if the previous stack was an NMI stack. This covers
* the case where we interrupt an outer NMI after it clears
- * "NMI executing" but before IRET.
+ * "NMI executing" but before IRET. We need to be careful, though:
+ * there is one case in which RSP could point to the NMI stack
+ * despite there being no NMI active: naughty userspace controls
+ * RSP at the very beginning of the SYSCALL targets. We can
+ * pull a fast one on naughty userspace, though: we program
+ * SYSCALL to mask DF, so userspace cannot cause DF to be set
+ * if it controls the kernel's RSP. We set DF before we clear
+ * "NMI executing".
*/
lea 6*8(%rsp), %rdx
/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
@@ -1573,7 +1580,13 @@ ENTRY(nmi)
cmpq %rdx, 4*8(%rsp)
/* If it is below the NMI stack, it is a normal NMI */
jb first_nmi
- /* Ah, it is within the NMI stack, treat it as nested */
+
+ /* Ah, it is within the NMI stack. */
+
+ testb $(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp)
+ jz first_nmi /* RSP was user controlled. */
+
+ /* This is a nested NMI. */
CFI_REMEMBER_STATE
@@ -1691,8 +1704,16 @@ nmi_restore:
/* Point RSP at the "iret" frame. */
REMOVE_PT_GPREGS_FROM_STACK 6*8
- /* Clear "NMI executing". */
- movq $0, 5*8(%rsp)
+ /*
+ * Clear "NMI executing". Set DF first so that we can easily
+ * distinguish the remaining code between here and IRET from
+ * the SYSCALL entry and exit paths. On a native kernel, we
+ * could just inspect RIP, but, on paravirt kernels,
+ * INTERRUPT_RETURN can translate into a jump into a
+ * hypercall page.
+ */
+ std
+ movq $0, 5*8(%rsp) /* clear "NMI executing" */
/*
* INTERRUPT_RETURN reads the "iret" frame and exits the NMI
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cyrille Pitchen <[email protected]>
commit 1c8a38b1268aebc1a903b21b11575077e02d2cf7 upstream.
This patch adds the missing update of the transfer data width in
at_xdmac_prep_slave_sg().
Indeed, for each item in the scatter-gather list, we check whether the
transfer length is aligned with the data width provided by
dmaengine_slave_config(). If so, we directly use this data width for the
current part of the transfer we are preparing. Otherwise, the data width
is reduced to 8 bits (1 byte). Of course, the actual number of register
accesses must also be updated to match the new data width.
So one chunk was missing in the original patch (see Fixes tag below): the
number of register accesses was correctly set to (len >> fixed_dwidth) in
mbr_ubc but the real data width was not updated in mbr_cfg. Since mbr_cfg
may change for each part of the scatter-gather transfer this also explains
why the original patch used the Descriptor View 2 instead of the
Descriptor View 1.
Let's take the example of a DMA transfer to write 8bit data into an Atmel
USART with FIFOs. When FIFOs are enabled in the USART, its Transmit
Holding Register (THR) works in multidata mode, that is to say that up to
4 8bit data can be written into the THR in a single 32bit access and it is
still possible to write only one data with a 8bit access. To take
advantage of this new feature, the DMA driver was modified to allow
multiple dwidths when doing slave transfers.
For instance, when the total length is 22 bytes, the USART driver splits
the transfer into 2 parts:
First part: 20 bytes transferred through 5 32bit writes into THR
Second part: 2 bytes transferred though 2 8bit writes into THR
For the second part, the data width was first set to 4_BYTES by the USART
driver thanks to dmaengine_slave_config() then at_xdmac_prep_slave_sg()
reduces this data width to 1_BYTE because the 2 byte length is not aligned
with the original 4_BYTES data width. Since the data width is modified,
the actual number of writes into THR must be set accordingly.
Signed-off-by: Cyrille Pitchen <[email protected]>
Fixes: 6d3a7d9e3ada ("dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers")
Cc: [email protected] #4.0 and later
Acked-by: Nicolas Ferre <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -648,16 +648,17 @@ at_xdmac_prep_slave_sg(struct dma_chan *
desc->lld.mbr_sa = mem;
desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
- desc->lld.mbr_cfg = atchan->cfg;
- dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
+ dwidth = at_xdmac_get_dwidth(atchan->cfg);
fixed_dwidth = IS_ALIGNED(len, 1 << dwidth)
- ? at_xdmac_get_dwidth(desc->lld.mbr_cfg)
+ ? dwidth
: AT_XDMAC_CC_DWIDTH_BYTE;
desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV2 /* next descriptor view */
| AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */
| AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */
| (i == sg_len - 1 ? 0 : AT_XDMAC_MBR_UBC_NDE) /* descriptor fetch */
| (len >> fixed_dwidth); /* microblock length */
+ desc->lld.mbr_cfg = (atchan->cfg & ~AT_XDMAC_CC_DWIDTH_MASK) |
+ AT_XDMAC_CC_DWIDTH(fixed_dwidth);
dev_dbg(chan2dev(chan),
"%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n",
__func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leonidas Da Silva Barbosa <[email protected]>
commit c3365ce130e50176533debe1cabebcdb8e61156c upstream.
In NX we need to pass always a 16 multiple size nx_sg_list to
co processor. Trim function handle with this assuring all nx_sg_lists
are 16 multiple size, although data was not being considerated when
crop was done. It was causing an unalignment between size of the list
and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or
invalid operation.
This patch fix this recalculating how much data should be put back
in to_process variable what assures the size of sg_list will be
correct with size of the data.
Signed-off-by: Leonidas S. Barbosa <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/nx/nx.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -215,8 +215,15 @@ struct nx_sg *nx_walk_and_build(struct n
* @delta: is the amount we need to crop in order to bound the list.
*
*/
-static long int trim_sg_list(struct nx_sg *sg, struct nx_sg *end, unsigned int delta)
+static long int trim_sg_list(struct nx_sg *sg,
+ struct nx_sg *end,
+ unsigned int delta,
+ unsigned int *nbytes)
{
+ long int oplen;
+ long int data_back;
+ unsigned int is_delta = delta;
+
while (delta && end > sg) {
struct nx_sg *last = end - 1;
@@ -228,7 +235,20 @@ static long int trim_sg_list(struct nx_s
delta -= last->len;
}
}
- return (sg - end) * sizeof(struct nx_sg);
+
+ /* There are cases where we need to crop list in order to make it
+ * a block size multiple, but we also need to align data. In order to
+ * that we need to calculate how much we need to put back to be
+ * processed
+ */
+ oplen = (sg - end) * sizeof(struct nx_sg);
+ if (is_delta) {
+ data_back = (abs(oplen) / AES_BLOCK_SIZE) * sg->len;
+ data_back = *nbytes - (data_back & ~(AES_BLOCK_SIZE - 1));
+ *nbytes -= data_back;
+ }
+
+ return oplen;
}
/**
@@ -330,8 +350,8 @@ int nx_build_sg_lists(struct nx_crypto_c
/* these lengths should be negative, which will indicate to phyp that
* the input and output parameters are scatterlists, not linear
* buffers */
- nx_ctx->op.inlen = trim_sg_list(nx_ctx->in_sg, nx_insg, delta);
- nx_ctx->op.outlen = trim_sg_list(nx_ctx->out_sg, nx_outsg, delta);
+ nx_ctx->op.inlen = trim_sg_list(nx_ctx->in_sg, nx_insg, delta, nbytes);
+ nx_ctx->op.outlen = trim_sg_list(nx_ctx->out_sg, nx_outsg, delta, nbytes);
return 0;
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leonidas Da Silva Barbosa <[email protected]>
commit 10d87b730e1d9f1442cae6487bb3aef8632bed23 upstream.
Bug happens when a data size less than SHA block size is passed.
Since first attempt will be saved in buffer, second round attempt
get into two step to calculate op.inlen and op.outlen. The issue
resides in this step. A wrong value of op.inlen and outlen was being
calculated.
This patch fix this eliminate the nx_sha_build_sg_list, that is
useless in SHA's algorithm context. Instead we call nx_build_sg_list
directly and pass a previous calculated max_sg_len to it.
Signed-off-by: Leonidas S. Barbosa <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/nx/nx-sha256.c | 84 ++++++++++++++++++++++++-----------------
drivers/crypto/nx/nx-sha512.c | 85 ++++++++++++++++++++++++------------------
drivers/crypto/nx/nx.c | 47 -----------------------
drivers/crypto/nx/nx.h | 2
4 files changed, 99 insertions(+), 119 deletions(-)
--- a/drivers/crypto/nx/nx-sha256.c
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -33,8 +33,9 @@ static int nx_sha256_init(struct shash_d
{
struct sha256_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+ struct nx_sg *out_sg;
int len;
- int rc;
+ u32 max_sg_len;
nx_ctx_init(nx_ctx, HCOP_FC_SHA);
@@ -44,15 +45,18 @@ static int nx_sha256_init(struct shash_d
NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA256);
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
len = SHA256_DIGEST_SIZE;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->out_sg,
- &nx_ctx->op.outlen,
- &len,
- (u8 *) sctx->state,
- NX_DS_SHA256);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+ &len, max_sg_len);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
- if (rc)
- goto out;
+ if (len != SHA256_DIGEST_SIZE)
+ return -EINVAL;
sctx->state[0] = __cpu_to_be32(SHA256_H0);
sctx->state[1] = __cpu_to_be32(SHA256_H1);
@@ -64,7 +68,6 @@ static int nx_sha256_init(struct shash_d
sctx->state[7] = __cpu_to_be32(SHA256_H7);
sctx->count = 0;
-out:
return 0;
}
@@ -74,10 +77,12 @@ static int nx_sha256_update(struct shash
struct sha256_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+ struct nx_sg *in_sg;
u64 to_process = 0, leftover, total;
unsigned long irq_flags;
int rc = 0;
int data_len;
+ u32 max_sg_len;
u64 buf_len = (sctx->count % SHA256_BLOCK_SIZE);
spin_lock_irqsave(&nx_ctx->lock, irq_flags);
@@ -97,6 +102,12 @@ static int nx_sha256_update(struct shash
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+ in_sg = nx_ctx->in_sg;
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
do {
/*
* to_process: the SHA256_BLOCK_SIZE data chunk to process in
@@ -108,25 +119,22 @@ static int nx_sha256_update(struct shash
if (buf_len) {
data_len = buf_len;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &data_len,
- (u8 *) sctx->buf,
- NX_DS_SHA256);
+ in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ (u8 *) sctx->buf,
+ &data_len,
+ max_sg_len);
- if (rc || data_len != buf_len)
+ if (data_len != buf_len) {
+ rc = -EINVAL;
goto out;
+ }
}
data_len = to_process - buf_len;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &data_len,
- (u8 *) data,
- NX_DS_SHA256);
+ in_sg = nx_build_sg_list(in_sg, (u8 *) data,
+ &data_len, max_sg_len);
- if (rc)
- goto out;
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
to_process = (data_len + buf_len);
leftover = total - to_process;
@@ -173,12 +181,19 @@ static int nx_sha256_final(struct shash_
struct sha256_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+ struct nx_sg *in_sg, *out_sg;
unsigned long irq_flags;
- int rc;
+ u32 max_sg_len;
+ int rc = 0;
int len;
spin_lock_irqsave(&nx_ctx->lock, irq_flags);
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
/* final is represented by continuing the operation and indicating that
* this is not an intermediate operation */
if (sctx->count >= SHA256_BLOCK_SIZE) {
@@ -195,25 +210,24 @@ static int nx_sha256_final(struct shash_
csbcpb->cpb.sha256.message_bit_length = (u64) (sctx->count * 8);
len = sctx->count & (SHA256_BLOCK_SIZE - 1);
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &len,
- (u8 *) sctx->buf,
- NX_DS_SHA256);
+ in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *) sctx->buf,
+ &len, max_sg_len);
- if (rc || len != (sctx->count & (SHA256_BLOCK_SIZE - 1)))
+ if (len != (sctx->count & (SHA256_BLOCK_SIZE - 1))) {
+ rc = -EINVAL;
goto out;
+ }
len = SHA256_DIGEST_SIZE;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->out_sg,
- &nx_ctx->op.outlen,
- &len,
- out,
- NX_DS_SHA256);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, out, &len, max_sg_len);
- if (rc || len != SHA256_DIGEST_SIZE)
+ if (len != SHA256_DIGEST_SIZE) {
+ rc = -EINVAL;
goto out;
+ }
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
if (!nx_ctx->op.outlen) {
rc = -EINVAL;
goto out;
--- a/drivers/crypto/nx/nx-sha512.c
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -32,8 +32,9 @@ static int nx_sha512_init(struct shash_d
{
struct sha512_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+ struct nx_sg *out_sg;
int len;
- int rc;
+ u32 max_sg_len;
nx_ctx_init(nx_ctx, HCOP_FC_SHA);
@@ -43,15 +44,18 @@ static int nx_sha512_init(struct shash_d
NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA512);
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
len = SHA512_DIGEST_SIZE;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->out_sg,
- &nx_ctx->op.outlen,
- &len,
- (u8 *)sctx->state,
- NX_DS_SHA512);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+ &len, max_sg_len);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
- if (rc || len != SHA512_DIGEST_SIZE)
- goto out;
+ if (len != SHA512_DIGEST_SIZE)
+ return -EINVAL;
sctx->state[0] = __cpu_to_be64(SHA512_H0);
sctx->state[1] = __cpu_to_be64(SHA512_H1);
@@ -63,7 +67,6 @@ static int nx_sha512_init(struct shash_d
sctx->state[7] = __cpu_to_be64(SHA512_H7);
sctx->count[0] = 0;
-out:
return 0;
}
@@ -73,10 +76,12 @@ static int nx_sha512_update(struct shash
struct sha512_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+ struct nx_sg *in_sg;
u64 to_process, leftover = 0, total;
unsigned long irq_flags;
int rc = 0;
int data_len;
+ u32 max_sg_len;
u64 buf_len = (sctx->count[0] % SHA512_BLOCK_SIZE);
spin_lock_irqsave(&nx_ctx->lock, irq_flags);
@@ -96,6 +101,12 @@ static int nx_sha512_update(struct shash
NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+ in_sg = nx_ctx->in_sg;
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
do {
/*
* to_process: the SHA512_BLOCK_SIZE data chunk to process in
@@ -108,25 +119,26 @@ static int nx_sha512_update(struct shash
if (buf_len) {
data_len = buf_len;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &data_len,
- (u8 *) sctx->buf,
- NX_DS_SHA512);
+ in_sg = nx_build_sg_list(nx_ctx->in_sg,
+ (u8 *) sctx->buf,
+ &data_len, max_sg_len);
- if (rc || data_len != buf_len)
+ if (data_len != buf_len) {
+ rc = -EINVAL;
goto out;
+ }
}
data_len = to_process - buf_len;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &data_len,
- (u8 *) data,
- NX_DS_SHA512);
+ in_sg = nx_build_sg_list(in_sg, (u8 *) data,
+ &data_len, max_sg_len);
+
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
- if (rc || data_len != (to_process - buf_len))
+ if (data_len != (to_process - buf_len)) {
+ rc = -EINVAL;
goto out;
+ }
to_process = (data_len + buf_len);
leftover = total - to_process;
@@ -172,13 +184,20 @@ static int nx_sha512_final(struct shash_
struct sha512_state *sctx = shash_desc_ctx(desc);
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+ struct nx_sg *in_sg, *out_sg;
+ u32 max_sg_len;
u64 count0;
unsigned long irq_flags;
- int rc;
+ int rc = 0;
int len;
spin_lock_irqsave(&nx_ctx->lock, irq_flags);
+ max_sg_len = min_t(u64, nx_ctx->ap->sglen,
+ nx_driver.of.max_sg_len/sizeof(struct nx_sg));
+ max_sg_len = min_t(u64, max_sg_len,
+ nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+
/* final is represented by continuing the operation and indicating that
* this is not an intermediate operation */
if (sctx->count[0] >= SHA512_BLOCK_SIZE) {
@@ -200,24 +219,20 @@ static int nx_sha512_final(struct shash_
csbcpb->cpb.sha512.message_bit_length_lo = count0;
len = sctx->count[0] & (SHA512_BLOCK_SIZE - 1);
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->in_sg,
- &nx_ctx->op.inlen,
- &len,
- (u8 *)sctx->buf,
- NX_DS_SHA512);
+ in_sg = nx_build_sg_list(nx_ctx->in_sg, sctx->buf, &len,
+ max_sg_len);
- if (rc || len != (sctx->count[0] & (SHA512_BLOCK_SIZE - 1)))
+ if (len != (sctx->count[0] & (SHA512_BLOCK_SIZE - 1))) {
+ rc = -EINVAL;
goto out;
+ }
len = SHA512_DIGEST_SIZE;
- rc = nx_sha_build_sg_list(nx_ctx, nx_ctx->out_sg,
- &nx_ctx->op.outlen,
- &len,
- out,
- NX_DS_SHA512);
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, out, &len,
+ max_sg_len);
- if (rc)
- goto out;
+ nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
if (!nx_ctx->op.outlen) {
rc = -EINVAL;
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -252,53 +252,6 @@ static long int trim_sg_list(struct nx_s
}
/**
- * nx_sha_build_sg_list - walk and build sg list to sha modes
- * using right bounds and limits.
- * @nx_ctx: NX crypto context for the lists we're building
- * @nx_sg: current sg list in or out list
- * @op_len: current op_len to be used in order to build a sg list
- * @nbytes: number or bytes to be processed
- * @offset: buf offset
- * @mode: SHA256 or SHA512
- */
-int nx_sha_build_sg_list(struct nx_crypto_ctx *nx_ctx,
- struct nx_sg *nx_in_outsg,
- s64 *op_len,
- unsigned int *nbytes,
- u8 *offset,
- u32 mode)
-{
- unsigned int delta = 0;
- unsigned int total = *nbytes;
- struct nx_sg *nx_insg = nx_in_outsg;
- unsigned int max_sg_len;
-
- max_sg_len = min_t(u64, nx_ctx->ap->sglen,
- nx_driver.of.max_sg_len/sizeof(struct nx_sg));
- max_sg_len = min_t(u64, max_sg_len,
- nx_ctx->ap->databytelen/NX_PAGE_SIZE);
-
- *nbytes = min_t(u64, *nbytes, nx_ctx->ap->databytelen);
- nx_insg = nx_build_sg_list(nx_insg, offset, nbytes, max_sg_len);
-
- switch (mode) {
- case NX_DS_SHA256:
- if (*nbytes < total)
- delta = *nbytes - (*nbytes & ~(SHA256_BLOCK_SIZE - 1));
- break;
- case NX_DS_SHA512:
- if (*nbytes < total)
- delta = *nbytes - (*nbytes & ~(SHA512_BLOCK_SIZE - 1));
- break;
- default:
- return -EINVAL;
- }
- *op_len = trim_sg_list(nx_in_outsg, nx_insg, delta);
-
- return 0;
-}
-
-/**
* nx_build_sg_lists - walk the input scatterlists and build arrays of NX
* scatterlists based on them.
*
--- a/drivers/crypto/nx/nx.h
+++ b/drivers/crypto/nx/nx.h
@@ -153,8 +153,6 @@ void nx_crypto_ctx_exit(struct crypto_tf
void nx_ctx_init(struct nx_crypto_ctx *nx_ctx, unsigned int function);
int nx_hcall_sync(struct nx_crypto_ctx *ctx, struct vio_pfo_op *op,
u32 may_sleep);
-int nx_sha_build_sg_list(struct nx_crypto_ctx *, struct nx_sg *,
- s64 *, unsigned int *, u8 *, u32);
struct nx_sg *nx_build_sg_list(struct nx_sg *, u8 *, unsigned int *, u32);
int nx_build_sg_lists(struct nx_crypto_ctx *, struct blkcipher_desc *,
struct scatterlist *, struct scatterlist *, unsigned int *,
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit 030f4e968741d65aea9cd5f7814d1164967801ef upstream.
This patch fixes a host of reentrancy bugs in the nx driver. The
following algorithms are affected:
* CCM
* GCM
* CTR
* XCBC
* SHA256
* SHA512
The crypto API allows a single transform to be used by multiple
threads simultaneously. For example, IPsec will use a single tfm
to process packets for a given SA. As packets may arrive on
multiple CPUs that tfm must be reentrant.
The nx driver does try to deal with this by using a spin lock.
Unfortunately only the basic AES/CBC/ECB algorithms do this in
the correct way.
The symptom of these bugs may range from the generation of incorrect
output to memory corruption.
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/nx/nx-aes-ccm.c | 6 ++-
drivers/crypto/nx/nx-aes-ctr.c | 7 ++--
drivers/crypto/nx/nx-aes-gcm.c | 17 +++++----
drivers/crypto/nx/nx-aes-xcbc.c | 70 +++++++++++++++++++++++++---------------
drivers/crypto/nx/nx-sha256.c | 43 +++++++++++++-----------
drivers/crypto/nx/nx-sha512.c | 44 ++++++++++++++-----------
drivers/crypto/nx/nx.c | 2 +
drivers/crypto/nx/nx.h | 14 ++++++--
8 files changed, 124 insertions(+), 79 deletions(-)
--- a/drivers/crypto/nx/nx-aes-ccm.c
+++ b/drivers/crypto/nx/nx-aes-ccm.c
@@ -494,8 +494,9 @@ out:
static int ccm4309_aes_nx_encrypt(struct aead_request *req)
{
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
struct blkcipher_desc desc;
- u8 *iv = nx_ctx->priv.ccm.iv;
+ u8 *iv = rctx->iv;
iv[0] = 3;
memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
@@ -525,8 +526,9 @@ static int ccm_aes_nx_encrypt(struct aea
static int ccm4309_aes_nx_decrypt(struct aead_request *req)
{
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
struct blkcipher_desc desc;
- u8 *iv = nx_ctx->priv.ccm.iv;
+ u8 *iv = rctx->iv;
iv[0] = 3;
memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
--- a/drivers/crypto/nx/nx-aes-ctr.c
+++ b/drivers/crypto/nx/nx-aes-ctr.c
@@ -72,7 +72,7 @@ static int ctr3686_aes_nx_set_key(struct
if (key_len < CTR_RFC3686_NONCE_SIZE)
return -EINVAL;
- memcpy(nx_ctx->priv.ctr.iv,
+ memcpy(nx_ctx->priv.ctr.nonce,
in_key + key_len - CTR_RFC3686_NONCE_SIZE,
CTR_RFC3686_NONCE_SIZE);
@@ -131,14 +131,15 @@ static int ctr3686_aes_nx_crypt(struct b
unsigned int nbytes)
{
struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
- u8 *iv = nx_ctx->priv.ctr.iv;
+ u8 iv[16];
+ memcpy(iv, nx_ctx->priv.ctr.nonce, CTR_RFC3686_IV_SIZE);
memcpy(iv + CTR_RFC3686_NONCE_SIZE,
desc->info, CTR_RFC3686_IV_SIZE);
iv[12] = iv[13] = iv[14] = 0;
iv[15] = 1;
- desc->info = nx_ctx->priv.ctr.iv;
+ desc->info = iv;
return ctr_aes_nx_crypt(desc, dst, src, nbytes);
}
--- a/drivers/crypto/nx/nx-aes-gcm.c
+++ b/drivers/crypto/nx/nx-aes-gcm.c
@@ -330,6 +330,7 @@ out:
static int gcm_aes_nx_crypt(struct aead_request *req, int enc)
{
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
struct blkcipher_desc desc;
unsigned int nbytes = req->cryptlen;
@@ -339,7 +340,7 @@ static int gcm_aes_nx_crypt(struct aead_
spin_lock_irqsave(&nx_ctx->lock, irq_flags);
- desc.info = nx_ctx->priv.gcm.iv;
+ desc.info = rctx->iv;
/* initialize the counter */
*(u32 *)(desc.info + NX_GCM_CTR_OFFSET) = 1;
@@ -434,8 +435,8 @@ out:
static int gcm_aes_nx_encrypt(struct aead_request *req)
{
- struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
- char *iv = nx_ctx->priv.gcm.iv;
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+ char *iv = rctx->iv;
memcpy(iv, req->iv, 12);
@@ -444,8 +445,8 @@ static int gcm_aes_nx_encrypt(struct aea
static int gcm_aes_nx_decrypt(struct aead_request *req)
{
- struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
- char *iv = nx_ctx->priv.gcm.iv;
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+ char *iv = rctx->iv;
memcpy(iv, req->iv, 12);
@@ -455,7 +456,8 @@ static int gcm_aes_nx_decrypt(struct aea
static int gcm4106_aes_nx_encrypt(struct aead_request *req)
{
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
- char *iv = nx_ctx->priv.gcm.iv;
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+ char *iv = rctx->iv;
char *nonce = nx_ctx->priv.gcm.nonce;
memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
@@ -467,7 +469,8 @@ static int gcm4106_aes_nx_encrypt(struct
static int gcm4106_aes_nx_decrypt(struct aead_request *req)
{
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
- char *iv = nx_ctx->priv.gcm.iv;
+ struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+ char *iv = rctx->iv;
char *nonce = nx_ctx->priv.gcm.nonce;
memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
--- a/drivers/crypto/nx/nx-aes-xcbc.c
+++ b/drivers/crypto/nx/nx-aes-xcbc.c
@@ -42,6 +42,7 @@ static int nx_xcbc_set_key(struct crypto
unsigned int key_len)
{
struct nx_crypto_ctx *nx_ctx = crypto_shash_ctx(desc);
+ struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
switch (key_len) {
case AES_KEYSIZE_128:
@@ -51,7 +52,7 @@ static int nx_xcbc_set_key(struct crypto
return -EINVAL;
}
- memcpy(nx_ctx->priv.xcbc.key, in_key, key_len);
+ memcpy(csbcpb->cpb.aes_xcbc.key, in_key, key_len);
return 0;
}
@@ -148,32 +149,29 @@ out:
return rc;
}
-static int nx_xcbc_init(struct shash_desc *desc)
+static int nx_crypto_ctx_aes_xcbc_init2(struct crypto_tfm *tfm)
{
- struct xcbc_state *sctx = shash_desc_ctx(desc);
- struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+ struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
- struct nx_sg *out_sg;
- int len;
+ int err;
- nx_ctx_init(nx_ctx, HCOP_FC_AES);
+ err = nx_crypto_ctx_aes_xcbc_init(tfm);
+ if (err)
+ return err;
- memset(sctx, 0, sizeof *sctx);
+ nx_ctx_init(nx_ctx, HCOP_FC_AES);
NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
csbcpb->cpb.hdr.mode = NX_MODE_AES_XCBC_MAC;
- memcpy(csbcpb->cpb.aes_xcbc.key, nx_ctx->priv.xcbc.key, AES_BLOCK_SIZE);
- memset(nx_ctx->priv.xcbc.key, 0, sizeof *nx_ctx->priv.xcbc.key);
-
- len = AES_BLOCK_SIZE;
- out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
- &len, nx_ctx->ap->sglen);
+ return 0;
+}
- if (len != AES_BLOCK_SIZE)
- return -EINVAL;
+static int nx_xcbc_init(struct shash_desc *desc)
+{
+ struct xcbc_state *sctx = shash_desc_ctx(desc);
- nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+ memset(sctx, 0, sizeof *sctx);
return 0;
}
@@ -186,6 +184,7 @@ static int nx_xcbc_update(struct shash_d
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
struct nx_sg *in_sg;
+ struct nx_sg *out_sg;
u32 to_process = 0, leftover, total;
unsigned int max_sg_len;
unsigned long irq_flags;
@@ -213,6 +212,17 @@ static int nx_xcbc_update(struct shash_d
max_sg_len = min_t(u64, max_sg_len,
nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+ data_len = AES_BLOCK_SIZE;
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+ &len, nx_ctx->ap->sglen);
+
+ if (data_len != AES_BLOCK_SIZE) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
do {
to_process = total - to_process;
to_process = to_process & ~(AES_BLOCK_SIZE - 1);
@@ -235,8 +245,10 @@ static int nx_xcbc_update(struct shash_d
(u8 *) sctx->buffer,
&data_len,
max_sg_len);
- if (data_len != sctx->count)
- return -EINVAL;
+ if (data_len != sctx->count) {
+ rc = -EINVAL;
+ goto out;
+ }
}
data_len = to_process - sctx->count;
@@ -245,8 +257,10 @@ static int nx_xcbc_update(struct shash_d
&data_len,
max_sg_len);
- if (data_len != to_process - sctx->count)
- return -EINVAL;
+ if (data_len != to_process - sctx->count) {
+ rc = -EINVAL;
+ goto out;
+ }
nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
sizeof(struct nx_sg);
@@ -325,15 +339,19 @@ static int nx_xcbc_final(struct shash_de
in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buffer,
&len, nx_ctx->ap->sglen);
- if (len != sctx->count)
- return -EINVAL;
+ if (len != sctx->count) {
+ rc = -EINVAL;
+ goto out;
+ }
len = AES_BLOCK_SIZE;
out_sg = nx_build_sg_list(nx_ctx->out_sg, out, &len,
nx_ctx->ap->sglen);
- if (len != AES_BLOCK_SIZE)
- return -EINVAL;
+ if (len != AES_BLOCK_SIZE) {
+ rc = -EINVAL;
+ goto out;
+ }
nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
@@ -372,7 +390,7 @@ struct shash_alg nx_shash_aes_xcbc_alg =
.cra_blocksize = AES_BLOCK_SIZE,
.cra_module = THIS_MODULE,
.cra_ctxsize = sizeof(struct nx_crypto_ctx),
- .cra_init = nx_crypto_ctx_aes_xcbc_init,
+ .cra_init = nx_crypto_ctx_aes_xcbc_init2,
.cra_exit = nx_crypto_ctx_exit,
}
};
--- a/drivers/crypto/nx/nx-sha256.c
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -29,34 +29,28 @@
#include "nx.h"
-static int nx_sha256_init(struct shash_desc *desc)
+static int nx_crypto_ctx_sha256_init(struct crypto_tfm *tfm)
{
- struct sha256_state *sctx = shash_desc_ctx(desc);
- struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
- struct nx_sg *out_sg;
- int len;
- u32 max_sg_len;
+ struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+ int err;
- nx_ctx_init(nx_ctx, HCOP_FC_SHA);
+ err = nx_crypto_ctx_sha_init(tfm);
+ if (err)
+ return err;
- memset(sctx, 0, sizeof *sctx);
+ nx_ctx_init(nx_ctx, HCOP_FC_SHA);
nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA256];
NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA256);
- max_sg_len = min_t(u64, nx_ctx->ap->sglen,
- nx_driver.of.max_sg_len/sizeof(struct nx_sg));
- max_sg_len = min_t(u64, max_sg_len,
- nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+ return 0;
+}
- len = SHA256_DIGEST_SIZE;
- out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
- &len, max_sg_len);
- nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+static int nx_sha256_init(struct shash_desc *desc) {
+ struct sha256_state *sctx = shash_desc_ctx(desc);
- if (len != SHA256_DIGEST_SIZE)
- return -EINVAL;
+ memset(sctx, 0, sizeof *sctx);
sctx->state[0] = __cpu_to_be32(SHA256_H0);
sctx->state[1] = __cpu_to_be32(SHA256_H1);
@@ -78,6 +72,7 @@ static int nx_sha256_update(struct shash
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
struct nx_sg *in_sg;
+ struct nx_sg *out_sg;
u64 to_process = 0, leftover, total;
unsigned long irq_flags;
int rc = 0;
@@ -108,6 +103,16 @@ static int nx_sha256_update(struct shash
max_sg_len = min_t(u64, max_sg_len,
nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+ data_len = SHA256_DIGEST_SIZE;
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+ &data_len, max_sg_len);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+ if (data_len != SHA256_DIGEST_SIZE) {
+ rc = -EINVAL;
+ goto out;
+ }
+
do {
/*
* to_process: the SHA256_BLOCK_SIZE data chunk to process in
@@ -282,7 +287,7 @@ struct shash_alg nx_shash_sha256_alg = {
.cra_blocksize = SHA256_BLOCK_SIZE,
.cra_module = THIS_MODULE,
.cra_ctxsize = sizeof(struct nx_crypto_ctx),
- .cra_init = nx_crypto_ctx_sha_init,
+ .cra_init = nx_crypto_ctx_sha256_init,
.cra_exit = nx_crypto_ctx_exit,
}
};
--- a/drivers/crypto/nx/nx-sha512.c
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -28,34 +28,29 @@
#include "nx.h"
-static int nx_sha512_init(struct shash_desc *desc)
+static int nx_crypto_ctx_sha512_init(struct crypto_tfm *tfm)
{
- struct sha512_state *sctx = shash_desc_ctx(desc);
- struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
- struct nx_sg *out_sg;
- int len;
- u32 max_sg_len;
+ struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+ int err;
- nx_ctx_init(nx_ctx, HCOP_FC_SHA);
+ err = nx_crypto_ctx_sha_init(tfm);
+ if (err)
+ return err;
- memset(sctx, 0, sizeof *sctx);
+ nx_ctx_init(nx_ctx, HCOP_FC_SHA);
nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA512];
NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA512);
- max_sg_len = min_t(u64, nx_ctx->ap->sglen,
- nx_driver.of.max_sg_len/sizeof(struct nx_sg));
- max_sg_len = min_t(u64, max_sg_len,
- nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+ return 0;
+}
- len = SHA512_DIGEST_SIZE;
- out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
- &len, max_sg_len);
- nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+static int nx_sha512_init(struct shash_desc *desc)
+{
+ struct sha512_state *sctx = shash_desc_ctx(desc);
- if (len != SHA512_DIGEST_SIZE)
- return -EINVAL;
+ memset(sctx, 0, sizeof *sctx);
sctx->state[0] = __cpu_to_be64(SHA512_H0);
sctx->state[1] = __cpu_to_be64(SHA512_H1);
@@ -77,6 +72,7 @@ static int nx_sha512_update(struct shash
struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
struct nx_sg *in_sg;
+ struct nx_sg *out_sg;
u64 to_process, leftover = 0, total;
unsigned long irq_flags;
int rc = 0;
@@ -107,6 +103,16 @@ static int nx_sha512_update(struct shash
max_sg_len = min_t(u64, max_sg_len,
nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+ data_len = SHA512_DIGEST_SIZE;
+ out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+ &data_len, max_sg_len);
+ nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+ if (data_len != SHA512_DIGEST_SIZE) {
+ rc = -EINVAL;
+ goto out;
+ }
+
do {
/*
* to_process: the SHA512_BLOCK_SIZE data chunk to process in
@@ -288,7 +294,7 @@ struct shash_alg nx_shash_sha512_alg = {
.cra_blocksize = SHA512_BLOCK_SIZE,
.cra_module = THIS_MODULE,
.cra_ctxsize = sizeof(struct nx_crypto_ctx),
- .cra_init = nx_crypto_ctx_sha_init,
+ .cra_init = nx_crypto_ctx_sha512_init,
.cra_exit = nx_crypto_ctx_exit,
}
};
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -635,12 +635,14 @@ static int nx_crypto_ctx_init(struct nx_
/* entry points from the crypto tfm initializers */
int nx_crypto_ctx_aes_ccm_init(struct crypto_tfm *tfm)
{
+ tfm->crt_aead.reqsize = sizeof(struct nx_ccm_rctx);
return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
NX_MODE_AES_CCM);
}
int nx_crypto_ctx_aes_gcm_init(struct crypto_tfm *tfm)
{
+ tfm->crt_aead.reqsize = sizeof(struct nx_gcm_rctx);
return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
NX_MODE_AES_GCM);
}
--- a/drivers/crypto/nx/nx.h
+++ b/drivers/crypto/nx/nx.h
@@ -2,6 +2,8 @@
#ifndef __NX_H__
#define __NX_H__
+#include <crypto/ctr.h>
+
#define NX_NAME "nx-crypto"
#define NX_STRING "IBM Power7+ Nest Accelerator Crypto Driver"
#define NX_VERSION "1.0"
@@ -91,8 +93,11 @@ struct nx_crypto_driver {
#define NX_GCM4106_NONCE_LEN (4)
#define NX_GCM_CTR_OFFSET (12)
-struct nx_gcm_priv {
+struct nx_gcm_rctx {
u8 iv[16];
+};
+
+struct nx_gcm_priv {
u8 iauth_tag[16];
u8 nonce[NX_GCM4106_NONCE_LEN];
};
@@ -100,8 +105,11 @@ struct nx_gcm_priv {
#define NX_CCM_AES_KEY_LEN (16)
#define NX_CCM4309_AES_KEY_LEN (19)
#define NX_CCM4309_NONCE_LEN (3)
-struct nx_ccm_priv {
+struct nx_ccm_rctx {
u8 iv[16];
+};
+
+struct nx_ccm_priv {
u8 b0[16];
u8 iauth_tag[16];
u8 oauth_tag[16];
@@ -113,7 +121,7 @@ struct nx_xcbc_priv {
};
struct nx_ctr_priv {
- u8 iv[16];
+ u8 nonce[CTR_RFC3686_NONCE_SIZE];
};
struct nx_crypto_ctx {
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit 44922150d87cef616fd183220d43d8fde4d41390 ]
If we have a series of events from userpsace, with %fprs=FPRS_FEF,
like follows:
ETRAP
ETRAP
VIS_ENTRY(fprs=0x4)
VIS_EXIT
RTRAP (kernel FPU restore with fpu_saved=0x4)
RTRAP
We will not restore the user registers that were clobbered by the FPU
using kernel code in the inner-most trap.
Traps allocate FPU save slots in the thread struct, and FPU using
sequences save the "dirty" FPU registers only.
This works at the initial trap level because all of the registers
get recorded into the top-level FPU save area, and we'll return
to userspace with the FPU disabled so that any FPU use by the user
will take an FPU disabled trap wherein we'll load the registers
back up properly.
But this is not how trap returns from kernel to kernel operate.
The simplest fix for this bug is to always save all FPU register state
for anything other than the top-most FPU save area.
Getting rid of the optimized inner-slot FPU saving code ends up
making VISEntryHalf degenerate into plain VISEntry.
Longer term we need to do something smarter to reinstate the partial
save optimizations. Perhaps the fundament error is having trap entry
and exit allocate FPU save slots and restore register state. Instead,
the VISEntry et al. calls should be doing that work.
This bug is about two decades old.
Reported-by: James Y Knight <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/include/asm/visasm.h | 16 ++-------
arch/sparc/lib/NG4memcpy.S | 5 ++
arch/sparc/lib/VISsave.S | 67 +---------------------------------------
arch/sparc/lib/ksyms.c | 4 --
4 files changed, 11 insertions(+), 81 deletions(-)
--- a/arch/sparc/include/asm/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
@@ -28,16 +28,10 @@
* Must preserve %o5 between VISEntryHalf and VISExitHalf */
#define VISEntryHalf \
- rd %fprs, %o5; \
- andcc %o5, FPRS_FEF, %g0; \
- be,pt %icc, 297f; \
- sethi %hi(298f), %g7; \
- sethi %hi(VISenterhalf), %g1; \
- jmpl %g1 + %lo(VISenterhalf), %g0; \
- or %g7, %lo(298f), %g7; \
- clr %o5; \
-297: wr %o5, FPRS_FEF, %fprs; \
-298:
+ VISEntry
+
+#define VISExitHalf \
+ VISExit
#define VISEntryHalfFast(fail_label) \
rd %fprs, %o5; \
@@ -47,7 +41,7 @@
ba,a,pt %xcc, fail_label; \
297: wr %o5, FPRS_FEF, %fprs;
-#define VISExitHalf \
+#define VISExitHalfFast \
wr %o5, 0, %fprs;
#ifndef __ASSEMBLY__
--- a/arch/sparc/lib/NG4memcpy.S
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -240,8 +240,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len
add %o0, 0x40, %o0
bne,pt %icc, 1b
LOAD(prefetch, %g1 + 0x200, #n_reads_strong)
+#ifdef NON_USER_COPY
+ VISExitHalfFast
+#else
VISExitHalf
-
+#endif
brz,pn %o2, .Lexit
cmp %o2, 19
ble,pn %icc, .Lsmall_unaligned
--- a/arch/sparc/lib/VISsave.S
+++ b/arch/sparc/lib/VISsave.S
@@ -44,9 +44,8 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
stx %g3, [%g6 + TI_GSR]
2: add %g6, %g1, %g3
- cmp %o5, FPRS_DU
- be,pn %icc, 6f
- sll %g1, 3, %g1
+ mov FPRS_DU | FPRS_DL | FPRS_FEF, %o5
+ sll %g1, 3, %g1
stb %o5, [%g3 + TI_FPSAVED]
rd %gsr, %g2
add %g6, %g1, %g3
@@ -80,65 +79,3 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
.align 32
80: jmpl %g7 + %g0, %g0
nop
-
-6: ldub [%g3 + TI_FPSAVED], %o5
- or %o5, FPRS_DU, %o5
- add %g6, TI_FPREGS+0x80, %g2
- stb %o5, [%g3 + TI_FPSAVED]
-
- sll %g1, 5, %g1
- add %g6, TI_FPREGS+0xc0, %g3
- wr %g0, FPRS_FEF, %fprs
- membar #Sync
- stda %f32, [%g2 + %g1] ASI_BLK_P
- stda %f48, [%g3 + %g1] ASI_BLK_P
- membar #Sync
- ba,pt %xcc, 80f
- nop
-
- .align 32
-80: jmpl %g7 + %g0, %g0
- nop
-
- .align 32
-VISenterhalf:
- ldub [%g6 + TI_FPDEPTH], %g1
- brnz,a,pn %g1, 1f
- cmp %g1, 1
- stb %g0, [%g6 + TI_FPSAVED]
- stx %fsr, [%g6 + TI_XFSR]
- clr %o5
- jmpl %g7 + %g0, %g0
- wr %g0, FPRS_FEF, %fprs
-
-1: bne,pn %icc, 2f
- srl %g1, 1, %g1
- ba,pt %xcc, vis1
- sub %g7, 8, %g7
-2: addcc %g6, %g1, %g3
- sll %g1, 3, %g1
- andn %o5, FPRS_DU, %g2
- stb %g2, [%g3 + TI_FPSAVED]
-
- rd %gsr, %g2
- add %g6, %g1, %g3
- stx %g2, [%g3 + TI_GSR]
- add %g6, %g1, %g2
- stx %fsr, [%g2 + TI_XFSR]
- sll %g1, 5, %g1
-3: andcc %o5, FPRS_DL, %g0
- be,pn %icc, 4f
- add %g6, TI_FPREGS, %g2
-
- add %g6, TI_FPREGS+0x40, %g3
- membar #Sync
- stda %f0, [%g2 + %g1] ASI_BLK_P
- stda %f16, [%g3 + %g1] ASI_BLK_P
- membar #Sync
- ba,pt %xcc, 4f
- nop
-
- .align 32
-4: and %o5, FPRS_DU, %o5
- jmpl %g7 + %g0, %g0
- wr %o5, FPRS_FEF, %fprs
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -135,10 +135,6 @@ EXPORT_SYMBOL(copy_user_page);
void VISenter(void);
EXPORT_SYMBOL(VISenter);
-/* CRYPTO code needs this */
-void VISenterhalf(void);
-EXPORT_SYMBOL(VISenterhalf);
-
extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
unsigned long *);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Murali Karicheri <[email protected]>
commit 02fdfd708fd252a778709beb6c65d5e7360341ac upstream.
Main PLL controller has post divider bits in a separate register in
pll controller. Use the value from this register instead of fixed
divider when available.
Signed-off-by: Murali Karicheri <[email protected]>
Signed-off-by: Michael Turquette <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/clock/keystone-pll.txt | 8 +++---
drivers/clk/keystone/pll.c | 20 +++++++++++++--
2 files changed, 22 insertions(+), 6 deletions(-)
--- a/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -15,8 +15,8 @@ Required properties:
- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
- clocks : parent clock phandle
- reg - pll control0 and pll multipler registers
-- reg-names : control and multiplier. The multiplier is applicable only for
- main pll clock
+- reg-names : control, multiplier and post-divider. The multiplier and
+ post-divider registers are applicable only for main pll clock
- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
for postdiv
@@ -25,8 +25,8 @@ Example:
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
fixed-postdiv = <2>;
};
--- a/drivers/clk/keystone/pll.c
+++ b/drivers/clk/keystone/pll.c
@@ -37,7 +37,8 @@
* Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
* or PA PLL available on keystone2. These PLLs are controlled by
* this register. Main PLL is controlled by a PLL controller.
- * @pllm: PLL register map address
+ * @pllm: PLL register map address for multiplier bits
+ * @pllod: PLL register map address for post divider bits
* @pll_ctl0: PLL controller map address
* @pllm_lower_mask: multiplier lower mask
* @pllm_upper_mask: multiplier upper mask
@@ -53,6 +54,7 @@ struct clk_pll_data {
u32 phy_pllm;
u32 phy_pll_ctl0;
void __iomem *pllm;
+ void __iomem *pllod;
void __iomem *pll_ctl0;
u32 pllm_lower_mask;
u32 pllm_upper_mask;
@@ -102,7 +104,11 @@ static unsigned long clk_pllclk_recalc(s
/* read post divider from od bits*/
postdiv = ((val & pll_data->clkod_mask) >>
pll_data->clkod_shift) + 1;
- else
+ else if (pll_data->pllod) {
+ postdiv = readl(pll_data->pllod);
+ postdiv = ((postdiv & pll_data->clkod_mask) >>
+ pll_data->clkod_shift) + 1;
+ } else
postdiv = pll_data->postdiv;
rate /= (prediv + 1);
@@ -172,12 +178,21 @@ static void __init _of_pll_clk_init(stru
/* assume the PLL has output divider register bits */
pll_data->clkod_mask = CLKOD_MASK;
pll_data->clkod_shift = CLKOD_SHIFT;
+
+ /*
+ * Check if there is an post-divider register. If not
+ * assume od bits are part of control register.
+ */
+ i = of_property_match_string(node, "reg-names",
+ "post-divider");
+ pll_data->pllod = of_iomap(node, i);
}
i = of_property_match_string(node, "reg-names", "control");
pll_data->pll_ctl0 = of_iomap(node, i);
if (!pll_data->pll_ctl0) {
pr_err("%s: ioremap failed\n", __func__);
+ iounmap(pll_data->pllod);
goto out;
}
@@ -193,6 +208,7 @@ static void __init _of_pll_clk_init(stru
pll_data->pllm = of_iomap(node, i);
if (!pll_data->pllm) {
iounmap(pll_data->pll_ctl0);
+ iounmap(pll_data->pllod);
goto out;
}
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Murali Karicheri <[email protected]>
commit c1bfa985ded82cacdfc6403e78f329c44e35534a upstream.
All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.
Signed-off-by: Murali Karicheri <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/k2e-clocks.dtsi | 5 ++---
arch/arm/boot/dts/k2hk-clocks.dtsi | 5 ++---
arch/arm/boot/dts/k2l-clocks.dtsi | 5 ++---
3 files changed, 6 insertions(+), 9 deletions(-)
--- a/arch/arm/boot/dts/k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -13,9 +13,8 @@ clocks {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
- fixed-postdiv = <2>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
};
papllclk: papllclk@2620358 {
--- a/arch/arm/boot/dts/k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
@@ -22,9 +22,8 @@ clocks {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
- fixed-postdiv = <2>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
};
papllclk: papllclk@2620358 {
--- a/arch/arm/boot/dts/k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/k2l-clocks.dtsi
@@ -22,9 +22,8 @@ clocks {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
- fixed-postdiv = <2>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
};
papllclk: papllclk@2620358 {
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shilpa Sreeramalu <[email protected]>
commit 412efa73dcd3bd03c1838c91e094533a95529039 upstream.
The usage_count variable was read before it was set to the correct
value, due to which the firmware load was failing. Because of this
IPC messages sent to the firmware were timing out causing a delay
of about 1 second while playing audio from the internal speakers.
With this patch the usage_count is read after the function call
pm_runtime_get_sync which will increment the usage_count variable
and the firmware load is successful and all the IPC messages are
processed correctly.
Signed-off-by: Shilpa Sreeramalu <[email protected]>
Signed-off-by: Fang, Yang A <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/atom/sst/sst_drv_interface.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/sound/soc/intel/atom/sst/sst_drv_interface.c
+++ b/sound/soc/intel/atom/sst/sst_drv_interface.c
@@ -42,6 +42,11 @@
#define MIN_FRAGMENT_SIZE (50 * 1024)
#define MAX_FRAGMENT_SIZE (1024 * 1024)
#define SST_GET_BYTES_PER_SAMPLE(pcm_wd_sz) (((pcm_wd_sz + 15) >> 4) << 1)
+#ifdef CONFIG_PM
+#define GET_USAGE_COUNT(dev) (atomic_read(&dev->power.usage_count))
+#else
+#define GET_USAGE_COUNT(dev) 1
+#endif
int free_stream_context(struct intel_sst_drv *ctx, unsigned int str_id)
{
@@ -141,15 +146,9 @@ static int sst_power_control(struct devi
int ret = 0;
int usage_count = 0;
-#ifdef CONFIG_PM
- usage_count = atomic_read(&dev->power.usage_count);
-#else
- usage_count = 1;
-#endif
-
if (state == true) {
ret = pm_runtime_get_sync(dev);
-
+ usage_count = GET_USAGE_COUNT(dev);
dev_dbg(ctx->dev, "Enable: pm usage count: %d\n", usage_count);
if (ret < 0) {
dev_err(ctx->dev, "Runtime get failed with err: %d\n", ret);
@@ -164,6 +163,7 @@ static int sst_power_control(struct devi
}
}
} else {
+ usage_count = GET_USAGE_COUNT(dev);
dev_dbg(ctx->dev, "Disable: pm usage count: %d\n", usage_count);
return sst_pm_runtime_put(ctx);
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Zhang <[email protected]>
commit a6c2a32ac83567f15e9af3dcbc73148ce68b2ced upstream.
The regmap_write in ssm4567_set_dai_fmt accidentally clears the
TDM_BCLKS field which was set earlier by ssm4567_set_tdm_slot.
This patch fixes it by using regmap_update_bits with proper mask.
Signed-off-by: Ben Zhang <[email protected]>
Acked-by: Lars-Peter Clausen <[email protected]>
Acked-by: Anatol Pomozov <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/ssm4567.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/sound/soc/codecs/ssm4567.c
+++ b/sound/soc/codecs/ssm4567.c
@@ -315,7 +315,13 @@ static int ssm4567_set_dai_fmt(struct sn
if (invert_fclk)
ctrl1 |= SSM4567_SAI_CTRL_1_FSYNC;
- return regmap_write(ssm4567->regmap, SSM4567_REG_SAI_CTRL_1, ctrl1);
+ return regmap_update_bits(ssm4567->regmap, SSM4567_REG_SAI_CTRL_1,
+ SSM4567_SAI_CTRL_1_BCLK |
+ SSM4567_SAI_CTRL_1_FSYNC |
+ SSM4567_SAI_CTRL_1_LJ |
+ SSM4567_SAI_CTRL_1_TDM |
+ SSM4567_SAI_CTRL_1_PDM,
+ ctrl1);
}
static int ssm4567_set_power(struct ssm4567 *ssm4567, bool enable)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <[email protected]>
commit fa8173a3ef0570affde7da352de202190b3786c2 upstream.
The de-emphasis sampling rate selection is controlled by BIT[3:4] of
PCM1681_DEEMPH_CONTROL register. Do proper left shift to set it.
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Marek Belisko <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/pcm1681.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/codecs/pcm1681.c
+++ b/sound/soc/codecs/pcm1681.c
@@ -102,7 +102,7 @@ static int pcm1681_set_deemph(struct snd
if (val != -1) {
regmap_update_bits(priv->regmap, PCM1681_DEEMPH_CONTROL,
- PCM1681_DEEMPH_RATE_MASK, val);
+ PCM1681_DEEMPH_RATE_MASK, val << 3);
enable = 1;
} else
enable = 0;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <[email protected]>
commit e50b1e06b79e9d51efbff9627b4dd407184ef43f upstream.
The DAPM lock must be held when accessing the DAPM graph status through
sysfs or debugfs, otherwise concurrent changes to the graph can result in
undefined behaviour.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-dapm.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1811,6 +1811,7 @@ static ssize_t dapm_widget_power_read_fi
size_t count, loff_t *ppos)
{
struct snd_soc_dapm_widget *w = file->private_data;
+ struct snd_soc_card *card = w->dapm->card;
char *buf;
int in, out;
ssize_t ret;
@@ -1820,6 +1821,8 @@ static ssize_t dapm_widget_power_read_fi
if (!buf)
return -ENOMEM;
+ mutex_lock(&card->dapm_mutex);
+
/* Supply widgets are not handled by is_connected_{input,output}_ep() */
if (w->is_supply) {
in = 0;
@@ -1866,6 +1869,8 @@ static ssize_t dapm_widget_power_read_fi
p->sink->name);
}
+ mutex_unlock(&card->dapm_mutex);
+
ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
kfree(buf);
@@ -2140,11 +2145,15 @@ static ssize_t dapm_widget_show(struct d
struct snd_soc_pcm_runtime *rtd = dev_get_drvdata(dev);
int i, count = 0;
+ mutex_lock(&rtd->card->dapm_mutex);
+
for (i = 0; i < rtd->num_codecs; i++) {
struct snd_soc_codec *codec = rtd->codec_dais[i]->codec;
count += dapm_widget_show_codec(codec, buf + count);
}
+ mutex_unlock(&rtd->card->dapm_mutex);
+
return count;
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <[email protected]>
commit a798c24a69b64f09e2d323ac8155a36373e5d5fd upstream.
Commit fdb6eb0a1287 ("ASoC: dapm: Modify widget stream name according to
prefix") fixed the case where a DAPM route between a DAI widget and a
DAC/ADC/AIF widget with a matching stream name was not created when the
DAPM context was using a prefix.
Unfortunately the patch introduced a few issues on its own like leaking the
dynamically allocated stream name memory and also not checking whether the
allocation succeeded in the first place.
It is also incomplete in that it still does not handle the case where
stream name of the widget is a substring of the stream name of the DAI,
which is explicitly allowed and works fine if no DAPM prefix is used.
Revert the commit and take a slightly different approach to solving the
issue. Instead of comparing the widget's stream name to the name of the DAI
widget compare it to the stream name of the DAI widget. The stream name of
the DAI widget is identical to the name of the DAI widget except that it
wont have the DAPM prefix added. So this approach behaves identical
regardless to whether the DAPM context uses a prefix or not.
We don't have to worry about potentially matching with a widget with the
same stream name, but from a different DAPM context with a different
prefix, since the code already makes sure that both the DAI widget and the
matched widget are from the same DAPM context.
Fixes: fdb6eb0a1287 ("ASoC: dapm: Modify widget stream name according to prefix")
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-dapm.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3109,16 +3109,10 @@ snd_soc_dapm_new_control(struct snd_soc_
}
prefix = soc_dapm_prefix(dapm);
- if (prefix) {
+ if (prefix)
w->name = kasprintf(GFP_KERNEL, "%s %s", prefix, widget->name);
- if (widget->sname)
- w->sname = kasprintf(GFP_KERNEL, "%s %s", prefix,
- widget->sname);
- } else {
+ else
w->name = kasprintf(GFP_KERNEL, "%s", widget->name);
- if (widget->sname)
- w->sname = kasprintf(GFP_KERNEL, "%s", widget->sname);
- }
if (w->name == NULL) {
kfree(w);
return NULL;
@@ -3566,7 +3560,7 @@ int snd_soc_dapm_link_dai_widgets(struct
break;
}
- if (!w->sname || !strstr(w->sname, dai_w->name))
+ if (!w->sname || !strstr(w->sname, dai_w->sname))
continue;
if (dai_w->id == snd_soc_dapm_dai_in) {
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit aa1acff356bbedfd03b544051f5b371746735d89 upstream.
The update_va_mapping hypercall can fail if the VA isn't present
in the guest's page tables. Under certain loads, this can
result in an OOPS when the target address is in unpopulated vmap
space.
While we're at it, add comments to help explain what's going on.
This isn't a great long-term fix. This code should probably be
changed to use something like set_memory_ro.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected] <[email protected]>
Cc: xen-devel <[email protected]>
Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/enlighten.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -483,6 +483,7 @@ static void set_aliased_prot(void *v, pg
pte_t pte;
unsigned long pfn;
struct page *page;
+ unsigned char dummy;
ptep = lookup_address((unsigned long)v, &level);
BUG_ON(ptep == NULL);
@@ -492,6 +493,32 @@ static void set_aliased_prot(void *v, pg
pte = pfn_pte(pfn, prot);
+ /*
+ * Careful: update_va_mapping() will fail if the virtual address
+ * we're poking isn't populated in the page tables. We don't
+ * need to worry about the direct map (that's always in the page
+ * tables), but we need to be careful about vmap space. In
+ * particular, the top level page table can lazily propagate
+ * entries between processes, so if we've switched mms since we
+ * vmapped the target in the first place, we might not have the
+ * top-level page table entry populated.
+ *
+ * We disable preemption because we want the same mm active when
+ * we probe the target and when we issue the hypercall. We'll
+ * have the same nominal mm, but if we're a kernel thread, lazy
+ * mm dropping could change our pgd.
+ *
+ * Out of an abundance of caution, this uses __get_user() to fault
+ * in the target address just in case there's some obscure case
+ * in which the target address isn't readable.
+ */
+
+ preempt_disable();
+
+ pagefault_disable(); /* Avoid warnings due to being atomic. */
+ __get_user(dummy, (unsigned char __user __force *)v);
+ pagefault_enable();
+
if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
BUG();
@@ -503,6 +530,8 @@ static void set_aliased_prot(void *v, pg
BUG();
} else
kmap_flush_unused();
+
+ preempt_enable();
}
static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
@@ -510,6 +539,17 @@ static void xen_alloc_ldt(struct desc_st
const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
int i;
+ /*
+ * We need to mark the all aliases of the LDT pages RO. We
+ * don't need to call vm_flush_aliases(), though, since that's
+ * only responsible for flushing aliases out the TLBs, not the
+ * page tables, and Xen will flush the TLB for us if needed.
+ *
+ * To avoid confusing future readers: none of this is necessary
+ * to load the LDT. The hypervisor only checks this when the
+ * LDT is faulted in due to subsequent descriptor access.
+ */
+
for(i = 0; i < entries; i += entries_per_page)
set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Schwidefsky <[email protected]>
commit 17fb874dee093139923af8ed36061faa92cc8e79 upstream.
The kthread_run() function can return two different error values
but the hwrng core only checks for -ENOMEM. If the other error
value -EINTR is returned it is assigned to hwrng_fill and later
used on a kthread_stop() call which naturally crashes.
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/hw_random/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -429,7 +429,7 @@ static int hwrng_fillfn(void *unused)
static void start_khwrngd(void)
{
hwrng_fill = kthread_run(hwrng_fillfn, NULL, "hwrng");
- if (hwrng_fill == ERR_PTR(-ENOMEM)) {
+ if (IS_ERR(hwrng_fill)) {
pr_err("hwrng_fill thread creation failed");
hwrng_fill = NULL;
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tadeusz Struk <[email protected]>
commit 6f043b50da8e03bdcc5703fd37ea45bc6892432f upstream.
The synchronization method used atomic was bogus.
Use a proper synchronization with mutex.
Signed-off-by: Tadeusz Struk <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/qat/qat_common/qat_algs.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/crypto/qat/qat_common/qat_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_algs.c
@@ -73,7 +73,8 @@
ICP_QAT_HW_CIPHER_KEY_CONVERT, \
ICP_QAT_HW_CIPHER_DECRYPT)
-static atomic_t active_dev;
+static DEFINE_MUTEX(algs_lock);
+static unsigned int active_devs;
struct qat_alg_buf {
uint32_t len;
@@ -1271,7 +1272,10 @@ static struct crypto_alg qat_algs[] = {
int qat_algs_register(void)
{
- if (atomic_add_return(1, &active_dev) == 1) {
+ int ret = 0;
+
+ mutex_lock(&algs_lock);
+ if (++active_devs == 1) {
int i;
for (i = 0; i < ARRAY_SIZE(qat_algs); i++)
@@ -1280,21 +1284,25 @@ int qat_algs_register(void)
CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC :
CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC;
- return crypto_register_algs(qat_algs, ARRAY_SIZE(qat_algs));
+ ret = crypto_register_algs(qat_algs, ARRAY_SIZE(qat_algs));
}
- return 0;
+ mutex_unlock(&algs_lock);
+ return ret;
}
int qat_algs_unregister(void)
{
- if (atomic_sub_return(1, &active_dev) == 0)
- return crypto_unregister_algs(qat_algs, ARRAY_SIZE(qat_algs));
- return 0;
+ int ret = 0;
+
+ mutex_lock(&algs_lock);
+ if (--active_devs == 0)
+ ret = crypto_unregister_algs(qat_algs, ARRAY_SIZE(qat_algs));
+ mutex_unlock(&algs_lock);
+ return ret;
}
int qat_algs_init(void)
{
- atomic_set(&active_dev, 0);
crypto_get_default_rng();
return 0;
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit f898c522f0e9ac9f3177d0762b76e2ab2d2cf9c0 upstream.
This patch removes a bogus BUG_ON in the ablkcipher path that
triggers when the destination buffer is different from the source
buffer and is scattered.
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ixp4xx_crypto.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -904,7 +904,6 @@ static int ablk_perform(struct ablkciphe
crypt->mode |= NPE_OP_NOT_IN_PLACE;
/* This was never tested by Intel
* for more than one dst buffer, I think. */
- BUG_ON(req->dst->length < nbytes);
req_ctx->dst = NULL;
if (!chainup_buffers(dev, req->dst, nbytes, &dst_hook,
flags, DMA_FROM_DEVICE))
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 2761713d35e370fd640b5781109f753066b746c4 upstream.
For write/discard obj_requests that involved a copyup method call, the
opcode of the first op is CEPH_OSD_OP_CALL and the ->callback is
rbd_img_obj_copyup_callback(). The latter frees copyup pages, sets
->xferred and delegates to rbd_img_obj_callback(), the "normal" image
object callback, for reporting to block layer and putting refs.
rbd_osd_req_callback() however treats CEPH_OSD_OP_CALL as a trivial op,
which means obj_request is marked done in rbd_osd_trivial_callback(),
*before* ->callback is invoked and rbd_img_obj_copyup_callback() has
a chance to run. Marking obj_request done essentially means giving
rbd_img_obj_callback() a license to end it at any moment, so if another
obj_request from the same img_request is being completed concurrently,
rbd_img_obj_end_request() may very well be called on such prematurally
marked done request:
<obj_request-1/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
rbd_obj_request_complete()
rbd_img_obj_copyup_callback()
rbd_img_obj_callback()
<obj_request-2/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
for_each_obj_request(obj_request->img_request) {
rbd_img_obj_end_request(obj_request-1/2)
rbd_img_obj_end_request(obj_request-2/2) <--
}
Calling rbd_img_obj_end_request() on such a request leads to trouble,
in particular because its ->xfferred is 0. We report 0 to the block
layer with blk_update_request(), get back 1 for "this request has more
data in flight" and then trip on
rbd_assert(more ^ (which == img_request->obj_request_count));
with rhs (which == ...) being 1 because rbd_img_obj_end_request() has
been called for both requests and lhs (more) being 1 because we haven't
got a chance to set ->xfferred in rbd_img_obj_copyup_callback() yet.
To fix this, leverage that rbd wants to call class methods in only two
cases: one is a generic method call wrapper (obj_request is standalone)
and the other is a copyup (obj_request is part of an img_request). So
make a dedicated handler for CEPH_OSD_OP_CALL and directly invoke
rbd_img_obj_copyup_callback() from it if obj_request is part of an
img_request, similar to how CEPH_OSD_OP_READ handler invokes
rbd_img_obj_request_read_callback().
Since rbd_img_obj_copyup_callback() is now being called from the OSD
request callback (only), it is renamed to rbd_osd_copyup_callback().
Cc: Alex Elder <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/rbd.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -522,6 +522,7 @@ void rbd_warn(struct rbd_device *rbd_dev
# define rbd_assert(expr) ((void) 0)
#endif /* !RBD_DEBUG */
+static void rbd_osd_copyup_callback(struct rbd_obj_request *obj_request);
static int rbd_img_obj_request_submit(struct rbd_obj_request *obj_request);
static void rbd_img_parent_read(struct rbd_obj_request *obj_request);
static void rbd_dev_remove_parent(struct rbd_device *rbd_dev);
@@ -1797,6 +1798,16 @@ static void rbd_osd_stat_callback(struct
obj_request_done_set(obj_request);
}
+static void rbd_osd_call_callback(struct rbd_obj_request *obj_request)
+{
+ dout("%s: obj %p\n", __func__, obj_request);
+
+ if (obj_request_img_data_test(obj_request))
+ rbd_osd_copyup_callback(obj_request);
+ else
+ obj_request_done_set(obj_request);
+}
+
static void rbd_osd_req_callback(struct ceph_osd_request *osd_req,
struct ceph_msg *msg)
{
@@ -1845,6 +1856,8 @@ static void rbd_osd_req_callback(struct
rbd_osd_discard_callback(obj_request);
break;
case CEPH_OSD_OP_CALL:
+ rbd_osd_call_callback(obj_request);
+ break;
case CEPH_OSD_OP_NOTIFY_ACK:
case CEPH_OSD_OP_WATCH:
rbd_osd_trivial_callback(obj_request);
@@ -2509,13 +2522,15 @@ out_unwind:
}
static void
-rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request)
+rbd_osd_copyup_callback(struct rbd_obj_request *obj_request)
{
struct rbd_img_request *img_request;
struct rbd_device *rbd_dev;
struct page **pages;
u32 page_count;
+ dout("%s: obj %p\n", __func__, obj_request);
+
rbd_assert(obj_request->type == OBJ_REQUEST_BIO ||
obj_request->type == OBJ_REQUEST_NODATA);
rbd_assert(obj_request_img_data_test(obj_request));
@@ -2542,9 +2557,7 @@ rbd_img_obj_copyup_callback(struct rbd_o
if (!obj_request->result)
obj_request->xferred = obj_request->length;
- /* Finish up with the normal image object callback */
-
- rbd_img_obj_callback(obj_request);
+ obj_request_done_set(obj_request);
}
static void
@@ -2629,7 +2642,6 @@ rbd_img_obj_parent_read_full_callback(st
/* All set, send it off. */
- orig_request->callback = rbd_img_obj_copyup_callback;
osdc = &rbd_dev->rbd_client->client->osdc;
img_result = rbd_obj_request_submit(osdc, orig_request);
if (!img_result)
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Denis Carikli <[email protected]>
commit e053f96b1a00022b4e2c7ceb7ac0229646626507 upstream.
Since commit 3d42a379b6fa5b46058e3302b1802b29f64865bb
("can: flexcan: add 2nd clock to support imx53 and newer")
the can driver requires a dt nodes to have a second clock.
Add them to imx35 to fix probing the flex can driver on the
respective platforms.
Signed-off-by: Denis Carikli <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx35.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -286,8 +286,8 @@
can1: can@53fe4000 {
compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
reg = <0x53fe4000 0x1000>;
- clocks = <&clks 33>;
- clock-names = "ipg";
+ clocks = <&clks 33>, <&clks 33>;
+ clock-names = "ipg", "per";
interrupts = <43>;
status = "disabled";
};
@@ -295,8 +295,8 @@
can2: can@53fe8000 {
compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
reg = <0x53fe8000 0x1000>;
- clocks = <&clks 34>;
- clock-names = "ipg";
+ clocks = <&clks 34>, <&clks 34>;
+ clock-names = "ipg", "per";
interrupts = <44>;
status = "disabled";
};
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roger Quadros <[email protected]>
commit 9a258afa928b45e6dd2efcac46ccf7eea705d35a upstream.
For hwmods without sysc, _init_mpu_rt_base(oh) won't be called and so
_find_mpu_rt_port(oh) will return NULL thus preventing ready state check
on those modules after the module is enabled.
This can potentially cause a bus access error if the module is accessed
before the module is ready.
Fix this by unconditionally calling _init_mpu_rt_base() during hwmod
_init(). Do ioremap only if we need SYSC access.
Eventhough _wait_target_ready() check doesn't really need MPU RT port but
just the PRCM registers, we still mandate that the hwmod must have an
MPU RT port if ready state check needs to be done. Else it would mean that
the module is not accessible by MPU so there is no point in waiting
for target to be ready.
e.g. this fixes the below DCAN bus access error on AM437x-gp-evm.
[ 16.672978] ------------[ cut here ]------------
[ 16.677885] WARNING: CPU: 0 PID: 1580 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x234/0x35c()
[ 16.687946] 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_PER_0 (Read): Data Access in User mode during Functional access
[ 16.700654] Modules linked in: xhci_hcd btwilink ti_vpfe dwc3 videobuf2_core ov2659 bluetooth v4l2_common videodev ti_am335x_adc kfifo_buf industrialio c_can_platform videobuf2_dma_contig media snd_soc_tlv320aic3x pixcir_i2c_ts c_can dc
[ 16.731144] CPU: 0 PID: 1580 Comm: rpc.statd Not tainted 3.14.26-02561-gf733aa036398 #180
[ 16.739747] Backtrace:
[ 16.742336] [<c0011108>] (dump_backtrace) from [<c00112a4>] (show_stack+0x18/0x1c)
[ 16.750285] r6:00000093 r5:00000009 r4:eab5b8a8 r3:00000000
[ 16.756252] [<c001128c>] (show_stack) from [<c05a4418>] (dump_stack+0x20/0x28)
[ 16.763870] [<c05a43f8>] (dump_stack) from [<c0037120>] (warn_slowpath_common+0x6c/0x8c)
[ 16.772408] [<c00370b4>] (warn_slowpath_common) from [<c00371e4>] (warn_slowpath_fmt+0x38/0x40)
[ 16.781550] r8:c05d1f90 r7:c0730844 r6:c0730448 r5:80080003 r4:ed0cd210
[ 16.788626] [<c00371b0>] (warn_slowpath_fmt) from [<c027fa94>] (l3_interrupt_handler+0x234/0x35c)
[ 16.797968] r3:ed0cd480 r2:c0730508
[ 16.801747] [<c027f860>] (l3_interrupt_handler) from [<c0063758>] (handle_irq_event_percpu+0x54/0x1bc)
[ 16.811533] r10:ed005600 r9:c084855b r8:0000002a r7:00000000 r6:00000000 r5:0000002a
[ 16.819780] r4:ed0e6d80
[ 16.822453] [<c0063704>] (handle_irq_event_percpu) from [<c00638f0>] (handle_irq_event+0x30/0x40)
[ 16.831789] r10:eb2b6938 r9:eb2b6960 r8:bf011420 r7:fa240100 r6:00000000 r5:0000002a
[ 16.840052] r4:ed005600
[ 16.842744] [<c00638c0>] (handle_irq_event) from [<c00661d8>] (handle_fasteoi_irq+0x74/0x128)
[ 16.851702] r4:ed005600 r3:00000000
[ 16.855479] [<c0066164>] (handle_fasteoi_irq) from [<c0063068>] (generic_handle_irq+0x28/0x38)
[ 16.864523] r4:0000002a r3:c0066164
[ 16.868294] [<c0063040>] (generic_handle_irq) from [<c000ef60>] (handle_IRQ+0x38/0x8c)
[ 16.876612] r4:c081c640 r3:00000202
[ 16.880380] [<c000ef28>] (handle_IRQ) from [<c00084f0>] (gic_handle_irq+0x30/0x5c)
[ 16.888328] r6:eab5ba38 r5:c0804460 r4:fa24010c r3:00000100
[ 16.894303] [<c00084c0>] (gic_handle_irq) from [<c05a8d80>] (__irq_svc+0x40/0x50)
[ 16.902193] Exception stack(0xeab5ba38 to 0xeab5ba80)
[ 16.907499] ba20: 00000000 00000006
[ 16.916108] ba40: fa1d0000 fa1d0008 ed3d3000 eab5bab4 ed3d3460 c0842af4 bf011420 eb2b6960
[ 16.924716] ba60: eb2b6938 eab5ba8c eab5ba90 eab5ba80 bf035220 bf07702c 600f0013 ffffffff
[ 16.933317] r7:eab5ba6c r6:ffffffff r5:600f0013 r4:bf07702c
[ 16.939317] [<bf077000>] (c_can_plat_read_reg_aligned_to_16bit [c_can_platform]) from [<bf035220>] (c_can_get_berr_counter+0x38/0x64 [c_can])
[ 16.952696] [<bf0351e8>] (c_can_get_berr_counter [c_can]) from [<bf010294>] (can_fill_info+0x124/0x15c [can_dev])
[ 16.963480] r5:ec8c9740 r4:ed3d3000
[ 16.967253] [<bf010170>] (can_fill_info [can_dev]) from [<c0502fa8>] (rtnl_fill_ifinfo+0x58c/0x8fc)
[ 16.976749] r6:ec8c9740 r5:ed3d3000 r4:eb2b6780
[ 16.981613] [<c0502a1c>] (rtnl_fill_ifinfo) from [<c0503408>] (rtnl_dump_ifinfo+0xf0/0x1dc)
[ 16.990401] r10:ec8c9740 r9:00000000 r8:00000000 r7:00000000 r6:ebd4d1b4 r5:ed3d3000
[ 16.998671] r4:00000000
[ 17.001342] [<c0503318>] (rtnl_dump_ifinfo) from [<c050e6e4>] (netlink_dump+0xa8/0x1e0)
[ 17.009772] r10:00000000 r9:00000000 r8:c0503318 r7:ebf3e6c0 r6:ebd4d1b4 r5:ec8c9740
[ 17.018050] r4:ebd4d000
[ 17.020714] [<c050e63c>] (netlink_dump) from [<c050ec10>] (__netlink_dump_start+0x104/0x154)
[ 17.029591] r6:eab5bd34 r5:ec8c9980 r4:ebd4d000
[ 17.034454] [<c050eb0c>] (__netlink_dump_start) from [<c0505604>] (rtnetlink_rcv_msg+0x110/0x1f4)
[ 17.043778] r7:00000000 r6:ec8c9980 r5:00000f40 r4:ebf3e6c0
[ 17.049743] [<c05054f4>] (rtnetlink_rcv_msg) from [<c05108e8>] (netlink_rcv_skb+0xb4/0xc8)
[ 17.058449] r8:eab5bdac r7:ec8c9980 r6:c05054f4 r5:ec8c9980 r4:ebf3e6c0
[ 17.065534] [<c0510834>] (netlink_rcv_skb) from [<c0504134>] (rtnetlink_rcv+0x24/0x2c)
[ 17.073854] r6:ebd4d000 r5:00000014 r4:ec8c9980 r3:c0504110
[ 17.079846] [<c0504110>] (rtnetlink_rcv) from [<c05102ac>] (netlink_unicast+0x180/0x1ec)
[ 17.088363] r4:ed0c6800 r3:c0504110
[ 17.092113] [<c051012c>] (netlink_unicast) from [<c0510670>] (netlink_sendmsg+0x2ac/0x380)
[ 17.100813] r10:00000000 r8:00000008 r7:ec8c9980 r6:ebd4d000 r5:eab5be70 r4:eab5bee4
[ 17.109083] [<c05103c4>] (netlink_sendmsg) from [<c04dfdb4>] (sock_sendmsg+0x90/0xb0)
[ 17.117305] r10:00000000 r9:eab5a000 r8:becdda3c r7:0000000c r6:ea978400 r5:eab5be70
[ 17.125563] r4:c05103c4
[ 17.128225] [<c04dfd24>] (sock_sendmsg) from [<c04e1c28>] (SyS_sendto+0xb8/0xdc)
[ 17.136001] r6:becdda5c r5:00000014 r4:ecd37040
[ 17.140876] [<c04e1b70>] (SyS_sendto) from [<c000e680>] (ret_fast_syscall+0x0/0x30)
[ 17.148923] r10:00000000 r8:c000e804 r7:00000122 r6:becdda5c r5:0000000c r4:becdda5c
[ 17.157169] ---[ end trace 2b71e15b38f58bad ]---
Fixes: 6423d6df1440 ("ARM: OMAP2+: hwmod: check for module address space during init")
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Paul Walmsley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-omap2/omap_hwmod.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2373,6 +2373,9 @@ static int of_dev_hwmod_lookup(struct de
* registers. This address is needed early so the OCP registers that
* are part of the device's address space can be ioremapped properly.
*
+ * If SYSC access is not needed, the registers will not be remapped
+ * and non-availability of MPU access is not treated as an error.
+ *
* Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
* -ENXIO on absent or invalid register target address space.
*/
@@ -2387,6 +2390,11 @@ static int __init _init_mpu_rt_base(stru
_save_mpu_port_index(oh);
+ /* if we don't need sysc access we don't need to ioremap */
+ if (!oh->class->sysc)
+ return 0;
+
+ /* we can't continue without MPU PORT if we need sysc access */
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return -ENXIO;
@@ -2396,8 +2404,10 @@ static int __init _init_mpu_rt_base(stru
oh->name);
/* Extract the IO space from device tree blob */
- if (!np)
+ if (!np) {
+ pr_err("omap_hwmod: %s: no dt node\n", oh->name);
return -ENXIO;
+ }
va_start = of_iomap(np, index + oh->mpu_rt_idx);
} else {
@@ -2456,13 +2466,11 @@ static int __init _init(struct omap_hwmo
oh->name, np->name);
}
- if (oh->class->sysc) {
- r = _init_mpu_rt_base(oh, NULL, index, np);
- if (r < 0) {
- WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
- oh->name);
- return 0;
- }
+ r = _init_mpu_rt_base(oh, NULL, index, np);
+ if (r < 0) {
+ WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
+ oh->name);
+ return 0;
}
r = _init_clocks(oh, NULL);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 44008f0896ae205b02b0882dbf807f0de149efc4 upstream.
Smatch complains that we have nested checks for "spdif_present". It
turns out the current behavior isn't correct, we should remove the first
check and keep the second.
Fixes: 1077a024812d ('ALSA: hda - Use generic parser for Cirrus codec driver')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_cirrus.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -1001,9 +1001,7 @@ static void cs4210_spdif_automute(struct
spec->spdif_present = spdif_present;
/* SPDIF TX on/off */
- if (spdif_present)
- snd_hda_set_pin_ctl(codec, spdif_pin,
- spdif_present ? PIN_OUT : 0);
+ snd_hda_set_pin_ctl(codec, spdif_pin, spdif_present ? PIN_OUT : 0);
cs_automute(codec);
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Wang <[email protected]>
commit 73851b36fe73819f8c201971e913324d4846a7ea upstream.
The fixup ALC292_FIXUP_DISABLE_AAMIX can fix the white noise of
the headphone on this Dell machine.
Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5118,6 +5118,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1028, 0x06c7, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <[email protected]>
commit 18f5ed365d3f188a91149d528c853000330a4a58 upstream.
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on from it.
Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.
As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a
quirk to transfer a first packet with 0x02 in its dbc field. This causes
ALSA Fireworks driver to detect discontinuity. In this case, firmware
version 5.7.0, 5.7.3 and 5.8.0 are used.
Payload CIP CIP
quadlets header1 header2
02 00050002 90ffffff <-
42 0005000a 90013000
42 00050012 90014400
42 0005001a 90015800
02 0005001a 90ffffff
42 00050022 90019000
42 0005002a 9001a400
42 00050032 9001b800
02 00050032 90ffffff
42 0005003a 9001d000
42 00050042 9001e400
42 0005004a 9001f800
02 0005004a 90ffffff
(AudioFire2 with firmware version 5.7.)
$ dmesg
snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02
These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface
Pack series uses the same ARM binary as their firmware. Thus, this
quirk may be observed among them.
This commit adds a new member for AMDTP structure. This member represents
the value of dbc field in a first AMDTP packet. Drivers can set it with
a preferred value according to model's quirk.
Tested-by: Johannes Oertei <[email protected]>
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/amdtp.c | 5 +++--
sound/firewire/amdtp.h | 2 ++
sound/firewire/fireworks/fireworks.c | 8 ++++++++
sound/firewire/fireworks/fireworks.h | 1 +
sound/firewire/fireworks/fireworks_stream.c | 9 +++++++++
5 files changed, 23 insertions(+), 2 deletions(-)
--- a/sound/firewire/amdtp.c
+++ b/sound/firewire/amdtp.c
@@ -730,8 +730,9 @@ static void handle_in_packet(struct amdt
s->data_block_counter != UINT_MAX)
data_block_counter = s->data_block_counter;
- if (((s->flags & CIP_SKIP_DBC_ZERO_CHECK) && data_block_counter == 0) ||
- (s->data_block_counter == UINT_MAX)) {
+ if (((s->flags & CIP_SKIP_DBC_ZERO_CHECK) &&
+ data_block_counter == s->tx_first_dbc) ||
+ s->data_block_counter == UINT_MAX) {
lost = false;
} else if (!(s->flags & CIP_DBC_IS_END_EVENT)) {
lost = data_block_counter != s->data_block_counter;
--- a/sound/firewire/amdtp.h
+++ b/sound/firewire/amdtp.h
@@ -153,6 +153,8 @@ struct amdtp_stream {
/* quirk: fixed interval of dbc between previos/current packets. */
unsigned int tx_dbc_interval;
+ /* quirk: indicate the value of dbc field in a first packet. */
+ unsigned int tx_first_dbc;
bool callbacked;
wait_queue_head_t callback_wait;
--- a/sound/firewire/fireworks/fireworks.c
+++ b/sound/firewire/fireworks/fireworks.c
@@ -248,8 +248,16 @@ efw_probe(struct fw_unit *unit,
err = get_hardware_info(efw);
if (err < 0)
goto error;
+ /* AudioFire8 (since 2009) and AudioFirePre8 */
if (entry->model_id == MODEL_ECHO_AUDIOFIRE_9)
efw->is_af9 = true;
+ /* These models uses the same firmware. */
+ if (entry->model_id == MODEL_ECHO_AUDIOFIRE_2 ||
+ entry->model_id == MODEL_ECHO_AUDIOFIRE_4 ||
+ entry->model_id == MODEL_ECHO_AUDIOFIRE_9 ||
+ entry->model_id == MODEL_GIBSON_RIP ||
+ entry->model_id == MODEL_GIBSON_GOLDTOP)
+ efw->is_fireworks3 = true;
snd_efw_proc_init(efw);
--- a/sound/firewire/fireworks/fireworks.h
+++ b/sound/firewire/fireworks/fireworks.h
@@ -71,6 +71,7 @@ struct snd_efw {
/* for quirks */
bool is_af9;
+ bool is_fireworks3;
u32 firmware_version;
unsigned int midi_in_ports;
--- a/sound/firewire/fireworks/fireworks_stream.c
+++ b/sound/firewire/fireworks/fireworks_stream.c
@@ -172,6 +172,15 @@ int snd_efw_stream_init_duplex(struct sn
efw->tx_stream.flags |= CIP_DBC_IS_END_EVENT;
/* Fireworks reset dbc at bus reset. */
efw->tx_stream.flags |= CIP_SKIP_DBC_ZERO_CHECK;
+ /*
+ * But Recent firmwares starts packets with non-zero dbc.
+ * Driver version 5.7.6 installs firmware version 5.7.3.
+ */
+ if (efw->is_fireworks3 &&
+ (efw->firmware_version == 0x5070000 ||
+ efw->firmware_version == 0x5070300 ||
+ efw->firmware_version == 0x5080000))
+ efw->tx_stream.tx_first_dbc = 0x02;
/* AudioFire9 always reports wrong dbs. */
if (efw->is_af9)
efw->tx_stream.flags |= CIP_WRONG_DBS;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Martinez Canillas <[email protected]>
commit 1252be9ce0ab4f622b8692b648894d09c0df71ce upstream.
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/nct7904.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -575,6 +575,7 @@ static const struct i2c_device_id nct790
{"nct7904", 0},
{}
};
+MODULE_DEVICE_TABLE(i2c, nct7904_id);
static struct i2c_driver nct7904_driver = {
.class = I2C_CLASS_HWMON,
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcus Gelderie <[email protected]>
commit de54b9ac253787c366bbfb28d901a31954eb3511 upstream.
A while back, the message queue implementation in the kernel was
improved to use btrees to speed up retrieval of messages, in commit
d6629859b36d ("ipc/mqueue: improve performance of send/recv").
That patch introducing the improved kernel handling of message queues
(using btrees) has, as a by-product, changed the meaning of the QSIZE
field in the pseudo-file created for the queue. Before, this field
reflected the size of the user-data in the queue. Since, it also takes
kernel data structures into account. For example, if 13 bytes of user
data are in the queue, on my machine the file reports a size of 61
bytes.
There was some discussion on this topic before (for example
https://lkml.org/lkml/2014/10/1/115). Commenting on a th lkml, Michael
Kerrisk gave the following background
(https://lkml.org/lkml/2015/6/16/74):
The pseudofiles in the mqueue filesystem (usually mounted at
/dev/mqueue) expose fields with metadata describing a message
queue. One of these fields, QSIZE, as originally implemented,
showed the total number of bytes of user data in all messages in
the message queue, and this feature was documented from the
beginning in the mq_overview(7) page. In 3.5, some other (useful)
work happened to break the user-space API in a couple of places,
including the value exposed via QSIZE, which now includes a measure
of kernel overhead bytes for the queue, a figure that renders QSIZE
useless for its original purpose, since there's no way to deduce
the number of overhead bytes consumed by the implementation.
(The other user-space breakage was subsequently fixed.)
This patch removes the accounting of kernel data structures in the
queue. Reporting the size of these data-structures in the QSIZE field
was a breaking change (see Michael's comment above). Without the QSIZE
field reporting the total size of user-data in the queue, there is no
way to deduce this number.
It should be noted that the resource limit RLIMIT_MSGQUEUE is counted
against the worst-case size of the queue (in both the old and the new
implementation). Therefore, the kernel overhead accounting in QSIZE is
not necessary to help the user understand the limitations RLIMIT imposes
on the processes.
Signed-off-by: Marcus Gelderie <[email protected]>
Acked-by: Doug Ledford <[email protected]>
Acked-by: Michael Kerrisk <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: David Howells <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: John Duffy <[email protected]>
Cc: Arto Bendiken <[email protected]>
Cc: Manfred Spraul <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/mqueue.c | 5 -----
1 file changed, 5 deletions(-)
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -143,7 +143,6 @@ static int msg_insert(struct msg_msg *ms
if (!leaf)
return -ENOMEM;
INIT_LIST_HEAD(&leaf->msg_list);
- info->qsize += sizeof(*leaf);
}
leaf->priority = msg->m_type;
rb_link_node(&leaf->rb_node, parent, p);
@@ -188,7 +187,6 @@ try_again:
"lazy leaf delete!\n");
rb_erase(&leaf->rb_node, &info->msg_tree);
if (info->node_cache) {
- info->qsize -= sizeof(*leaf);
kfree(leaf);
} else {
info->node_cache = leaf;
@@ -201,7 +199,6 @@ try_again:
if (list_empty(&leaf->msg_list)) {
rb_erase(&leaf->rb_node, &info->msg_tree);
if (info->node_cache) {
- info->qsize -= sizeof(*leaf);
kfree(leaf);
} else {
info->node_cache = leaf;
@@ -1026,7 +1023,6 @@ SYSCALL_DEFINE5(mq_timedsend, mqd_t, mqd
/* Save our speculative allocation into the cache */
INIT_LIST_HEAD(&new_leaf->msg_list);
info->node_cache = new_leaf;
- info->qsize += sizeof(*new_leaf);
new_leaf = NULL;
} else {
kfree(new_leaf);
@@ -1133,7 +1129,6 @@ SYSCALL_DEFINE5(mq_timedreceive, mqd_t,
/* Save our speculative allocation into the cache */
INIT_LIST_HEAD(&new_leaf->msg_list);
info->node_cache = new_leaf;
- info->qsize += sizeof(*new_leaf);
} else {
kfree(new_leaf);
}
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joseph Qi <[email protected]>
commit 209f7512d007980fd111a74a064d70a3656079cf upstream.
The "BUG_ON(list_empty(&osb->blocked_lock_list))" in
ocfs2_downconvert_thread_do_work can be triggered in the following case:
ocfs2dc has firstly saved osb->blocked_lock_count to local varibale
processed, and then processes the dentry lockres. During the dentry
put, it calls iput and then deletes rw, inode and open lockres from
blocked list in ocfs2_mark_lockres_freeing. And this causes the
variable `processed' to not reflect the number of blocked lockres to be
processed, which triggers the BUG.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dlmglue.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -4025,9 +4025,13 @@ static void ocfs2_downconvert_thread_do_
osb->dc_work_sequence = osb->dc_wake_sequence;
processed = osb->blocked_lock_count;
- while (processed) {
- BUG_ON(list_empty(&osb->blocked_lock_list));
-
+ /*
+ * blocked lock processing in this loop might call iput which can
+ * remove items off osb->blocked_lock_list. Downconvert up to
+ * 'processed' number of locks, but stop short if we had some
+ * removed in ocfs2_mark_lockres_freeing when downconverting.
+ */
+ while (processed && !list_empty(&osb->blocked_lock_list)) {
lockres = list_entry(osb->blocked_lock_list.next,
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joseph Qi <[email protected]>
commit 32e5a2a2be6b085febaac36efff495ad65a55e6c upstream.
When using a large volume, for example 9T volume with 2T already used,
frequent creation of small files with O_DIRECT when the IO is not
cluster aligned may clear sectors in the wrong place. This will cause
filesystem corruption.
This is because p_cpos is a u32. When calculating the corresponding
sector it should be converted to u64 first, otherwise it may overflow.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/aops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -686,7 +686,7 @@ static int ocfs2_direct_IO_zero_extend(s
if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
u64 s = i_size_read(inode);
- sector_t sector = (p_cpos << (osb->s_clustersize_bits - 9)) +
+ sector_t sector = ((u64)p_cpos << (osb->s_clustersize_bits - 9)) +
(do_div(s, osb->s_clustersize) >> 9);
ret = blkdev_issue_zeroout(osb->sb->s_bdev, sector,
@@ -911,7 +911,7 @@ static ssize_t ocfs2_direct_IO_write(str
BUG_ON(!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN));
ret = blkdev_issue_zeroout(osb->sb->s_bdev,
- p_cpos << (osb->s_clustersize_bits - 9),
+ (u64)p_cpos << (osb->s_clustersize_bits - 9),
zero_len_head >> 9, GFP_NOFS, false);
if (ret < 0)
mlog_errno(ret);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kinglong Mee <[email protected]>
commit c2227a39a078473115910512aa0f8d53bd915e60 upstream.
On an absent filesystem (one served by another server), we need to be
able to handle requests for certain attributest (like fs_locations, so
the client can find out which server does have the filesystem), but
others we can't.
We forgot to take that into account when adding another attribute
bitmask work for the SECURITY_LABEL attribute.
There an export entry with the "refer" option can result in:
[ 88.414272] kernel BUG at fs/nfsd/nfs4xdr.c:2249!
[ 88.414828] invalid opcode: 0000 [#1] SMP
[ 88.415368] Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache nfsd xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iosf_mbi ppdev btrfs coretemp crct10dif_pclmul crc32_pclmul crc32c_intel xor ghash_clmulni_intel raid6_pq vmw_balloon parport_pc parport i2c_piix4 shpchp vmw_vmci acpi_cpufreq auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi mptscsih serio_raw mptbase e1000 scsi_transport_spi ata_generic pata_acpi [last unloaded: nfsd]
[ 88.417827] CPU: 0 PID: 2116 Comm: nfsd Not tainted 4.0.7-300.fc22.x86_64 #1
[ 88.418448] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[ 88.419093] task: ffff880079146d50 ti: ffff8800785d8000 task.ti: ffff8800785d8000
[ 88.419729] RIP: 0010:[<ffffffffa04b3c10>] [<ffffffffa04b3c10>] nfsd4_encode_fattr+0x820/0x1f00 [nfsd]
[ 88.420376] RSP: 0000:ffff8800785db998 EFLAGS: 00010206
[ 88.421027] RAX: 0000000000000001 RBX: 000000000018091a RCX: ffff88006668b980
[ 88.421676] RDX: 00000000fffef7fc RSI: 0000000000000000 RDI: ffff880078d05000
[ 88.422315] RBP: ffff8800785dbb58 R08: ffff880078d043f8 R09: ffff880078d4a000
[ 88.422968] R10: 0000000000010000 R11: 0000000000000002 R12: 0000000000b0a23a
[ 88.423612] R13: ffff880078d05000 R14: ffff880078683100 R15: ffff88006668b980
[ 88.424295] FS: 0000000000000000(0000) GS:ffff88007c600000(0000) knlGS:0000000000000000
[ 88.424944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.425597] CR2: 00007f40bc370f90 CR3: 0000000035af5000 CR4: 00000000001407f0
[ 88.426285] Stack:
[ 88.426921] ffff8800785dbaa8 ffffffffa049e4af ffff8800785dba08 ffffffff813298f0
[ 88.427585] ffff880078683300 ffff8800769b0de8 0000089d00000001 0000000087f805e0
[ 88.428228] ffff880000000000 ffff880079434a00 0000000000000000 ffff88006668b980
[ 88.428877] Call Trace:
[ 88.429527] [<ffffffffa049e4af>] ? exp_get_by_name+0x7f/0xb0 [nfsd]
[ 88.430168] [<ffffffff813298f0>] ? inode_doinit_with_dentry+0x210/0x6a0
[ 88.430807] [<ffffffff8123833e>] ? d_lookup+0x2e/0x60
[ 88.431449] [<ffffffff81236133>] ? dput+0x33/0x230
[ 88.432097] [<ffffffff8123f214>] ? mntput+0x24/0x40
[ 88.432719] [<ffffffff812272b2>] ? path_put+0x22/0x30
[ 88.433340] [<ffffffffa049ac87>] ? nfsd_cross_mnt+0xb7/0x1c0 [nfsd]
[ 88.433954] [<ffffffffa04b54e0>] nfsd4_encode_dirent+0x1b0/0x3d0 [nfsd]
[ 88.434601] [<ffffffffa04b5330>] ? nfsd4_encode_getattr+0x40/0x40 [nfsd]
[ 88.435172] [<ffffffffa049c991>] nfsd_readdir+0x1c1/0x2a0 [nfsd]
[ 88.435710] [<ffffffffa049a530>] ? nfsd_direct_splice_actor+0x20/0x20 [nfsd]
[ 88.436447] [<ffffffffa04abf30>] nfsd4_encode_readdir+0x120/0x220 [nfsd]
[ 88.437011] [<ffffffffa04b58cd>] nfsd4_encode_operation+0x7d/0x190 [nfsd]
[ 88.437566] [<ffffffffa04aa6dd>] nfsd4_proc_compound+0x24d/0x6f0 [nfsd]
[ 88.438157] [<ffffffffa0496103>] nfsd_dispatch+0xc3/0x220 [nfsd]
[ 88.438680] [<ffffffffa006f0cb>] svc_process_common+0x43b/0x690 [sunrpc]
[ 88.439192] [<ffffffffa0070493>] svc_process+0x103/0x1b0 [sunrpc]
[ 88.439694] [<ffffffffa0495a57>] nfsd+0x117/0x190 [nfsd]
[ 88.440194] [<ffffffffa0495940>] ? nfsd_destroy+0x90/0x90 [nfsd]
[ 88.440697] [<ffffffff810bb728>] kthread+0xd8/0xf0
[ 88.441260] [<ffffffff810bb650>] ? kthread_worker_fn+0x180/0x180
[ 88.441762] [<ffffffff81789e58>] ret_from_fork+0x58/0x90
[ 88.442322] [<ffffffff810bb650>] ? kthread_worker_fn+0x180/0x180
[ 88.442879] Code: 0f 84 93 05 00 00 83 f8 ea c7 85 a0 fe ff ff 00 00 27 30 0f 84 ba fe ff ff 85 c0 0f 85 a5 fe ff ff e9 e3 f9 ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 be 04 00 00 00 4c 89 ef 4c 89 8d 68 fe
[ 88.444052] RIP [<ffffffffa04b3c10>] nfsd4_encode_fattr+0x820/0x1f00 [nfsd]
[ 88.444658] RSP <ffff8800785db998>
[ 88.445232] ---[ end trace 6cb9d0487d94a29f ]---
Signed-off-by: Kinglong Mee <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4xdr.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2142,6 +2142,7 @@ nfsd4_encode_aclname(struct xdr_stream *
#define WORD0_ABSENT_FS_ATTRS (FATTR4_WORD0_FS_LOCATIONS | FATTR4_WORD0_FSID | \
FATTR4_WORD0_RDATTR_ERROR)
#define WORD1_ABSENT_FS_ATTRS FATTR4_WORD1_MOUNTED_ON_FILEID
+#define WORD2_ABSENT_FS_ATTRS 0
#ifdef CONFIG_NFSD_V4_SECURITY_LABEL
static inline __be32
@@ -2170,7 +2171,7 @@ nfsd4_encode_security_label(struct xdr_s
{ return 0; }
#endif
-static __be32 fattr_handle_absent_fs(u32 *bmval0, u32 *bmval1, u32 *rdattr_err)
+static __be32 fattr_handle_absent_fs(u32 *bmval0, u32 *bmval1, u32 *bmval2, u32 *rdattr_err)
{
/* As per referral draft: */
if (*bmval0 & ~WORD0_ABSENT_FS_ATTRS ||
@@ -2183,6 +2184,7 @@ static __be32 fattr_handle_absent_fs(u32
}
*bmval0 &= WORD0_ABSENT_FS_ATTRS;
*bmval1 &= WORD1_ABSENT_FS_ATTRS;
+ *bmval2 &= WORD2_ABSENT_FS_ATTRS;
return 0;
}
@@ -2246,8 +2248,7 @@ nfsd4_encode_fattr(struct xdr_stream *xd
BUG_ON(bmval2 & ~nfsd_suppattrs2(minorversion));
if (exp->ex_fslocs.migrated) {
- BUG_ON(bmval[2]);
- status = fattr_handle_absent_fs(&bmval0, &bmval1, &rdattr_err);
+ status = fattr_handle_absent_fs(&bmval0, &bmval1, &bmval2, &rdattr_err);
if (status)
goto out;
}
@@ -2290,8 +2291,8 @@ nfsd4_encode_fattr(struct xdr_stream *xd
}
#ifdef CONFIG_NFSD_V4_SECURITY_LABEL
- if ((bmval[2] & FATTR4_WORD2_SECURITY_LABEL) ||
- bmval[0] & FATTR4_WORD0_SUPPORTED_ATTRS) {
+ if ((bmval2 & FATTR4_WORD2_SECURITY_LABEL) ||
+ bmval0 & FATTR4_WORD0_SUPPORTED_ATTRS) {
err = security_inode_getsecctx(d_inode(dentry),
&context, &contextlen);
contextsupport = (err == 0);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
commit c9ddbac9c89110f77cb0fa07e634aaf1194899aa upstream.
09a2c73ddfc7 ("PCI: Remove unused PCI_MSIX_FLAGS_BIRMASK definition")
removed PCI_MSIX_FLAGS_BIRMASK from an exported header because it was
unused in the kernel. But that breaks user programs that were using it
(QEMU in particular).
Restore the PCI_MSIX_FLAGS_BIRMASK definition.
[bhelgaas: changelog]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/pci_regs.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -319,6 +319,7 @@
#define PCI_MSIX_PBA 8 /* Pending Bit Array offset */
#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */
#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_FLAGS_BIRMASK PCI_MSIX_PBA_BIR /* deprecated */
#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
/* MSI-X Table entry format */
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 423f04d63cf421ea436bcc5be02543d549ce4b28 upstream.
raid1_end_read_request() assumes that the In_sync bits are consistent
with the ->degaded count.
raid1_spare_active updates the In_sync bit before the ->degraded count
and so exposes an inconsistency, as does error()
So extend the spinlock in raid1_spare_active() and error() to hide those
inconsistencies.
This should probably be part of
Commit: 34cab6f42003 ("md/raid1: fix test for 'was read error from
last working device'.")
as it addresses the same issue. It fixes the same bug and should go
to -stable for same reasons.
Fixes: 76073054c95b ("md/raid1: clean up read_balance.")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid1.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1475,6 +1475,7 @@ static void error(struct mddev *mddev, s
{
char b[BDEVNAME_SIZE];
struct r1conf *conf = mddev->private;
+ unsigned long flags;
/*
* If it is not operational, then we have already marked it as dead
@@ -1494,14 +1495,13 @@ static void error(struct mddev *mddev, s
return;
}
set_bit(Blocked, &rdev->flags);
+ spin_lock_irqsave(&conf->device_lock, flags);
if (test_and_clear_bit(In_sync, &rdev->flags)) {
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded++;
set_bit(Faulty, &rdev->flags);
- spin_unlock_irqrestore(&conf->device_lock, flags);
} else
set_bit(Faulty, &rdev->flags);
+ spin_unlock_irqrestore(&conf->device_lock, flags);
/*
* if recovery is running, make sure it aborts.
*/
@@ -1567,7 +1567,10 @@ static int raid1_spare_active(struct mdd
* Find all failed disks within the RAID1 configuration
* and mark them readable.
* Called under mddev lock, so rcu protection not needed.
+ * device_lock used to avoid races with raid1_end_read_request
+ * which expects 'In_sync' flags and ->degraded to be consistent.
*/
+ spin_lock_irqsave(&conf->device_lock, flags);
for (i = 0; i < conf->raid_disks; i++) {
struct md_rdev *rdev = conf->mirrors[i].rdev;
struct md_rdev *repl = conf->mirrors[conf->raid_disks + i].rdev;
@@ -1598,7 +1601,6 @@ static int raid1_spare_active(struct mdd
sysfs_notify_dirent_safe(rdev->sysfs_state);
}
}
- spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded -= count;
spin_unlock_irqrestore(&conf->device_lock, flags);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit bd4aaf8f9b85d6b2df3231fd62b219ebb75d3568 upstream.
A DM regression on 32 bit systems was reported against v4.2-rc3 here:
https://lkml.org/lkml/2015/7/29/401
Fix this by reverting both commit 1c220c69 ("dm: fix casting bug in
dm_merge_bvec()") and 148e51ba ("dm: improve documentation and code
clarity in dm_merge_bvec"). This combined revert is done to eliminate
the possibility of a partial revert in stable@ kernels.
In hindsight the correct fix, at the time 1c220c69 was applied to fix
the regression that 148e51ba introduced, should've been to simply revert
148e51ba.
Reported-by: Josh Boyer <[email protected]>
Tested-by: Adam Williamson <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1719,7 +1719,8 @@ static int dm_merge_bvec(struct request_
struct mapped_device *md = q->queuedata;
struct dm_table *map = dm_get_live_table_fast(md);
struct dm_target *ti;
- sector_t max_sectors, max_size = 0;
+ sector_t max_sectors;
+ int max_size = 0;
if (unlikely(!map))
goto out;
@@ -1732,18 +1733,10 @@ static int dm_merge_bvec(struct request_
* Find maximum amount of I/O that won't need splitting
*/
max_sectors = min(max_io_len(bvm->bi_sector, ti),
- (sector_t) queue_max_sectors(q));
+ (sector_t) BIO_MAX_SECTORS);
max_size = (max_sectors << SECTOR_SHIFT) - bvm->bi_size;
-
- /*
- * FIXME: this stop-gap fix _must_ be cleaned up (by passing a sector_t
- * to the targets' merge function since it holds sectors not bytes).
- * Just doing this as an interim fix for stable@ because the more
- * comprehensive cleanup of switching to sector_t will impact every
- * DM target that implements a ->merge hook.
- */
- if (max_size > INT_MAX)
- max_size = INT_MAX;
+ if (max_size < 0)
+ max_size = 0;
/*
* merge_bvec_fn() returns number of bytes
@@ -1751,13 +1744,13 @@ static int dm_merge_bvec(struct request_
* max is precomputed maximal io size
*/
if (max_size && ti->type->merge)
- max_size = ti->type->merge(ti, bvm, biovec, (int) max_size);
+ max_size = ti->type->merge(ti, bvm, biovec, max_size);
/*
* If the target doesn't support merge method and some of the devices
- * provided their merge_bvec method (we know this by looking for the
- * max_hw_sectors that dm_set_device_limits may set), then we can't
- * allow bios with multiple vector entries. So always set max_size
- * to 0, and the code below allows just one page.
+ * provided their merge_bvec method (we know this by looking at
+ * queue_max_hw_sectors), then we can't allow bios with multiple vector
+ * entries. So always set max_size to 0, and the code below allows
+ * just one page.
*/
else if (queue_max_hw_sectors(q) <= PAGE_SIZE >> 9)
max_size = 0;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit 1f17124006b65482d9084c01e252b59dbca8db8f upstream.
conf->beacon_rate can be NULL on association. So check conf->beacon_rate
BSS_CHANGED_BEACON_INFO needs to flagged in changed as the beacon_rate
will appear later.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6655/device_main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1486,8 +1486,9 @@ static void vnt_bss_info_changed(struct
}
}
- if (changed & BSS_CHANGED_ASSOC && priv->op_mode != NL80211_IFTYPE_AP) {
- if (conf->assoc) {
+ if (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_BEACON_INFO) &&
+ priv->op_mode != NL80211_IFTYPE_AP) {
+ if (conf->assoc && conf->beacon_rate) {
CARDbUpdateTSF(priv, conf->beacon_rate->hw_value,
conf->sync_tsf);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit fb1de5a4c825a389f054cc3803e06116d2fbdc7e upstream.
Including access_ok.h causes the ia64:allmodconfig build (and maybe others)
to fail with
include/linux/unaligned/le_struct.h:6:19: error:
redefinition of 'get_unaligned_le16'
include/linux/unaligned/access_ok.h:7:19: note:
previous definition of 'get_unaligned_le16' was here
include/linux/unaligned/le_struct.h:26:20: error:
redefinition of 'put_unaligned_le32'
include/linux/unaligned/access_ok.h:42:20: note:
previous definition of 'put_unaligned_le32' was here
include/linux/unaligned/le_struct.h:31:20: error:
redefinition of 'put_unaligned_le64'
include/linux/unaligned/access_ok.h:47:20: note:
previous definition of 'put_unaligned_le64' was here
Include unaligned.h instead and leave it up to the architecture to decide
how to implement unaligned accesses.
Fixes: 8c4f136497315 ("Staging: lustre: Use put_unaligned_le64")
Cc: Vaishali Thakkar <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/lustre/lustre/obdclass/debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/lustre/lustre/obdclass/debug.c
+++ b/drivers/staging/lustre/lustre/obdclass/debug.c
@@ -40,7 +40,7 @@
#define DEBUG_SUBSYSTEM D_OTHER
-#include <linux/unaligned/access_ok.h>
+#include <asm/unaligned.h>
#include "../include/obd_support.h"
#include "../include/lustre_debug.h"
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit c41b7767673cb76adeb2b5fde220209f717ea13c upstream.
The p_interval should be less if the 'bInterval' at the descriptor
is larger, eg, if 'bInterval' is 5 for HS, the p_interval should be
8000 / 16 = 500.
It fixes the patch 9bb87f168931 ("usb: gadget: f_uac2: send
reasonably sized packets")
Fixes: 9bb87f168931 ("usb: gadget: f_uac2: send reasonably sized packets")
Acked-by: Daniel Mack <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_uac2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1162,14 +1162,14 @@ afunc_set_alt(struct usb_function *fn, u
factor = 1000;
} else {
ep_desc = &hs_epin_desc;
- factor = 125;
+ factor = 8000;
}
/* pre-compute some values for iso_complete() */
uac2->p_framesize = opts->p_ssize *
num_channels(opts->p_chmask);
rate = opts->p_srate * uac2->p_framesize;
- uac2->p_interval = (1 << (ep_desc->bInterval - 1)) * factor;
+ uac2->p_interval = factor / (1 << (ep_desc->bInterval - 1));
uac2->p_pktsize = min_t(unsigned int, rate / uac2->p_interval,
prm->max_psize);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Reinhard Speyerer <[email protected]>
commit 653cdc13a340ad1cef29f1bab0d05d0771fa1d57 upstream.
Tests with a Sierra Wireless MC7355 have shown that 1199:9041 devices
also require the option_send_setup() code to be used on the USB
interface for the AT port to make unsolicited response codes work
correctly. Move these devices from the qcserial driver to the option
driver like it has been done for the 1199:68c0 devices in commit
d80c0d14183516f184a5ac88e11008ee4c7d2a2e ("USB: qcserial/option: make
AT URCs work for Sierra Wireless MC73xx").
Signed-off-by: Reinhard Speyerer <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
drivers/usb/serial/qcserial.c | 1 -
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1099,6 +1099,8 @@ static const struct usb_device_id option
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
.driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
+ { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x9041, 0xff),
+ .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC7305/MC7355 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -145,7 +145,6 @@ static const struct usb_device_id id_tab
{DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */
{DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */
{DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */
- {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */
{DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */
{DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Wood <[email protected]>
commit 5f867db63473f32cce1b868e281ebd42a41f8fad upstream.
Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER
using the same bit value as the existing NAND_BUSWIDTH_AUTO.
Cc: Kamal Dasu <[email protected]>
Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer")
Signed-off-by: Scott Wood <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mtd/nand.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -176,17 +176,17 @@ typedef enum {
/* Chip may not exist, so silence any errors in scan */
#define NAND_SCAN_SILENT_NODEV 0x00040000
/*
- * This option could be defined by controller drivers to protect against
- * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
- */
-#define NAND_USE_BOUNCE_BUFFER 0x00080000
-/*
* Autodetect nand buswidth with readid/onfi.
* This suppose the driver will configure the hardware in 8 bits mode
* when calling nand_scan_ident, and update its configuration
* before calling nand_scan_tail.
*/
#define NAND_BUSWIDTH_AUTO 0x00080000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER 0x00100000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 073e570d7c2caae9910a993d56f340be4548a4a8 upstream.
It turns out that only Dell laptops have the separate button bits for
v2 dualpoint sticks and that commit 92bac83dd79e ("Input: alps - non
interleaved V2 dualpoint has separate stick button bits") causes
regressions on Toshiba laptops.
This commit adds a check for Dell laptops to the code for handling these
extra button bits, fixing this regression.
This patch has been tested on a Dell Latitude D620 to make sure that it
does not reintroduce the original problem.
Reported-and-tested-by: Douglas Christman <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/input/alps.txt | 6 ++++--
drivers/input/mouse/alps.c | 8 ++++++--
2 files changed, 10 insertions(+), 4 deletions(-)
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
-buttons get reported separately in the PSM, PSR and PSL bits.
+the DualPoint Stick. The M, R and L bits signal the combined status of both
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
Dualpoint device -- interleaved packet format
---------------------------------------------
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -20,6 +20,7 @@
#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/libps2.h>
+#include <linux/dmi.h>
#include "psmouse.h"
#include "alps.h"
@@ -99,6 +100,7 @@ static const struct alps_nibble_commands
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
6-byte ALPS packet */
+#define ALPS_DELL 0x100 /* device is a Dell laptop */
#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
static const struct alps_model_info alps_model_data[] = {
@@ -251,9 +253,9 @@ static void alps_process_packet_v1_v2(st
return;
}
- /* Non interleaved V2 dualpoint has separate stick button bits */
+ /* Dell non interleaved V2 dualpoint has separate stick button bits */
if (priv->proto_version == ALPS_PROTO_V2 &&
- priv->flags == (ALPS_PASS | ALPS_DUALPOINT)) {
+ priv->flags == (ALPS_DELL | ALPS_PASS | ALPS_DUALPOINT)) {
left |= packet[0] & 1;
right |= packet[0] & 2;
middle |= packet[0] & 4;
@@ -2542,6 +2544,8 @@ static int alps_set_protocol(struct psmo
priv->byte0 = protocol->byte0;
priv->mask0 = protocol->mask0;
priv->flags = protocol->flags;
+ if (dmi_name_in_vendors("Dell"))
+ priv->flags |= ALPS_DELL;
priv->x_max = 2000;
priv->y_max = 1400;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 5f09a5cbd14ae16e93866040fa44d930ff885650 upstream.
During probe the regulator (if present) was enabled but not disabled in
case of failure. So an unsuccessful probe lead to enabling the
regulator which was actually not needed because the device was not
enabled.
Additionally each deferred probe lead to increase of regulator enable
count so it would not be effectively disabled during removal of the
device.
Test HW: Exynos4412 - Trats2 board
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fixes: 498d22f616f6 ("thermal: exynos: Support for TMU regulator defined at device tree")
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Lukasz Majewski <[email protected]>
Tested-by: Lukasz Majewski <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/samsung/exynos_tmu.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1209,6 +1209,8 @@ err_clk_sec:
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
err_sensor:
+ if (!IS_ERR_OR_NULL(data->regulator))
+ regulator_disable(data->regulator);
thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
return ret;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit ecf5fc6e9654cd7a268c782a523f072b2f1959f9 upstream.
Nikolay has reported a hang when a memcg reclaim got stuck with the
following backtrace:
PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync"
#0 __schedule at ffffffff815ab152
#1 schedule at ffffffff815ab76e
#2 schedule_timeout at ffffffff815ae5e5
#3 io_schedule_timeout at ffffffff815aad6a
#4 bit_wait_io at ffffffff815abfc6
#5 __wait_on_bit at ffffffff815abda5
#6 wait_on_page_bit at ffffffff8111fd4f
#7 shrink_page_list at ffffffff81135445
#8 shrink_inactive_list at ffffffff81135845
#9 shrink_lruvec at ffffffff81135ead
#10 shrink_zone at ffffffff811360c3
#11 shrink_zones at ffffffff81136eff
#12 do_try_to_free_pages at ffffffff8113712f
#13 try_to_free_mem_cgroup_pages at ffffffff811372be
#14 try_charge at ffffffff81189423
#15 mem_cgroup_try_charge at ffffffff8118c6f5
#16 __add_to_page_cache_locked at ffffffff8112137d
#17 add_to_page_cache_lru at ffffffff81121618
#18 pagecache_get_page at ffffffff8112170b
#19 grow_dev_page at ffffffff811c8297
#20 __getblk_slow at ffffffff811c91d6
#21 __getblk_gfp at ffffffff811c92c1
#22 ext4_ext_grow_indepth at ffffffff8124565c
#23 ext4_ext_create_new_leaf at ffffffff81246ca8
#24 ext4_ext_insert_extent at ffffffff81246f09
#25 ext4_ext_map_blocks at ffffffff8124a848
#26 ext4_map_blocks at ffffffff8121a5b7
#27 mpage_map_one_extent at ffffffff8121b1fa
#28 mpage_map_and_submit_extent at ffffffff8121f07b
#29 ext4_writepages at ffffffff8121f6d5
#30 do_writepages at ffffffff8112c490
#31 __filemap_fdatawrite_range at ffffffff81120199
#32 filemap_flush at ffffffff8112041c
#33 ext4_alloc_da_blocks at ffffffff81219da1
#34 ext4_rename at ffffffff81229b91
#35 ext4_rename2 at ffffffff81229e32
#36 vfs_rename at ffffffff811a08a5
#37 SYSC_renameat2 at ffffffff811a3ffc
#38 sys_renameat2 at ffffffff811a408e
#39 sys_rename at ffffffff8119e51e
#40 system_call_fastpath at ffffffff815afa89
Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.
The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified. The code has been changed by c3b94f44fcb0 ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code. But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.
ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio. Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.
Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback. The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.
As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem. Moreover he notes:
: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.
Cc: [email protected] # 3.9+
[[email protected]: corrected the control flow]
Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages")
Reported-by: Nikolay Borisov <[email protected]>
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmscan.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -937,21 +937,17 @@ static unsigned long shrink_page_list(st
*
* 2) Global reclaim encounters a page, memcg encounters a
* page that is not marked for immediate reclaim or
- * the caller does not have __GFP_IO. In this case mark
+ * the caller does not have __GFP_FS (or __GFP_IO if it's
+ * simply going to swap, not to fs). In this case mark
* the page for immediate reclaim and continue scanning.
*
- * __GFP_IO is checked because a loop driver thread might
+ * Require may_enter_fs because we would wait on fs, which
+ * may not have submitted IO yet. And the loop driver might
* enter reclaim, and deadlock if it waits on a page for
* which it is needed to do the write (loop masks off
* __GFP_IO|__GFP_FS for this reason); but more thought
* would probably show more reasons.
*
- * Don't require __GFP_FS, since we're not going into the
- * FS, just waiting on its writeback completion. Worryingly,
- * ext4 gfs2 and xfs allocate pages with
- * grab_cache_page_write_begin(,,AOP_FLAG_NOFS), so testing
- * may_enter_fs here is liable to OOM on them.
- *
* 3) memcg encounters a page that is not already marked
* PageReclaim. memcg does not have any dirty pages
* throttling so we could easily OOM just because too many
@@ -968,7 +964,7 @@ static unsigned long shrink_page_list(st
/* Case 2 above */
} else if (global_reclaim(sc) ||
- !PageReclaim(page) || !(sc->gfp_mask & __GFP_IO)) {
+ !PageReclaim(page) || !may_enter_fs) {
/*
* This is slightly racy - end_page_writeback()
* might have just cleared PageReclaim, then
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 3ead7c52bdb0ab44f4bb1feed505a8323cc12ba7 upstream.
This function may copy the si_addr_lsb field to user mode when it hasn't
been initialized, which can leak kernel stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/signalfd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -121,8 +121,9 @@ static int signalfd_copyinfo(struct sign
* Other callers might not initialize the si_lsb field,
* so check explicitly for the right codes here.
*/
- if (kinfo->si_code == BUS_MCEERR_AR ||
- kinfo->si_code == BUS_MCEERR_AO)
+ if (kinfo->si_signo == SIGBUS &&
+ (kinfo->si_code == BUS_MCEERR_AR ||
+ kinfo->si_code == BUS_MCEERR_AO))
err |= __put_user((short) kinfo->si_addr_lsb,
&uinfo->ssi_addr_lsb);
#endif
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 26135022f85105ad725cda103fa069e29e83bd16 upstream.
This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal32.c | 3 ++-
kernel/signal.c | 9 ++++++---
2 files changed, 8 insertions(+), 4 deletions(-)
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -168,7 +168,8 @@ int copy_siginfo_to_user32(compat_siginf
* Other callers might not initialize the si_lsb field,
* so check explicitely for the right codes here.
*/
- if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2753,12 +2753,15 @@ int copy_siginfo_to_user(siginfo_t __use
* Other callers might not initialize the si_lsb field,
* so check explicitly for the right codes here.
*/
- if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
#ifdef SEGV_BNDERR
- err |= __put_user(from->si_lower, &to->si_lower);
- err |= __put_user(from->si_upper, &to->si_upper);
+ if (from->si_signo == SIGSEGV && from->si_code == SEGV_BNDERR) {
+ err |= __put_user(from->si_lower, &to->si_lower);
+ err |= __put_user(from->si_upper, &to->si_upper);
+ }
#endif
break;
case __SI_CHLD:
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 3c00cb5e68dc719f2fc73a33b1b230aadfcb1309 upstream.
This function can leak kernel stack data when the user siginfo_t has a
positive si_code value. The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.
copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.
This fixes the following information leaks:
x86: 8 bytes leaked when sending a signal from a 32-bit process to
itself. This leak grows to 16 bytes if the process uses x32.
(si_code = __SI_CHLD)
x86: 100 bytes leaked when sending a signal from a 32-bit process to
a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
64-bit process. (si_code = any)
parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process. These bugs are also fixed for consistency.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal32.c | 2 --
arch/mips/kernel/signal32.c | 2 --
arch/powerpc/kernel/signal_32.c | 2 --
arch/tile/kernel/compat_signal.c | 2 --
kernel/signal.c | 4 ++--
5 files changed, 2 insertions(+), 10 deletions(-)
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -202,8 +202,6 @@ int copy_siginfo_to_user32(compat_siginf
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE))
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -409,8 +409,6 @@ int copy_siginfo_to_user32(compat_siginf
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, 3*sizeof(int)) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE32))
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -966,8 +966,6 @@ int copy_siginfo_to_user32(struct compat
int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, 3*sizeof(int)) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE32))
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -113,8 +113,6 @@ int copy_siginfo_from_user32(siginfo_t *
if (!access_ok(VERIFY_READ, from, sizeof(struct compat_siginfo)))
return -EFAULT;
- memset(to, 0, sizeof(*to));
-
err = __get_user(to->si_signo, &from->si_signo);
err |= __get_user(to->si_errno, &from->si_errno);
err |= __get_user(to->si_code, &from->si_code);
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -3025,7 +3025,7 @@ COMPAT_SYSCALL_DEFINE3(rt_sigqueueinfo,
int, sig,
struct compat_siginfo __user *, uinfo)
{
- siginfo_t info;
+ siginfo_t info = {};
int ret = copy_siginfo_from_user32(&info, uinfo);
if (unlikely(ret))
return ret;
@@ -3069,7 +3069,7 @@ COMPAT_SYSCALL_DEFINE4(rt_tgsigqueueinfo
int, sig,
struct compat_siginfo __user *, uinfo)
{
- siginfo_t info;
+ siginfo_t info = {};
if (copy_siginfo_from_user32(&info, uinfo))
return -EFAULT;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <[email protected]>
commit ce40cd3fc7fa40a6119e5fe6c0f2bc0eb4541009 upstream.
Malicious (or egregiously buggy) userspace can trigger it, but it
should never happen in normal operation.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Wang Kai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -150,7 +150,7 @@ static inline bool kvm_apic_vid_enabled(
static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu)
{
- return vcpu->arch.apic->pending_events;
+ return kvm_vcpu_has_lapic(vcpu) && vcpu->arch.apic->pending_events;
}
bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit a0649b2d3fffb1cde8745568c767f3a55a3462bc upstream.
Split out two self contained helpers to make the function more readable.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Cc: Jeff Layton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4state.c | 97 +++++++++++++++++++++++++++-------------------------
1 file changed, 52 insertions(+), 45 deletions(-)
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4574,20 +4574,51 @@ nfsd4_lookup_stateid(struct nfsd4_compou
return nfs_ok;
}
+static struct file *
+nfs4_find_file(struct nfs4_stid *s, int flags)
+{
+ switch (s->sc_type) {
+ case NFS4_DELEG_STID:
+ if (WARN_ON_ONCE(!s->sc_file->fi_deleg_file))
+ return NULL;
+ return get_file(s->sc_file->fi_deleg_file);
+ case NFS4_OPEN_STID:
+ case NFS4_LOCK_STID:
+ if (flags & RD_STATE)
+ return find_readable_file(s->sc_file);
+ else
+ return find_writeable_file(s->sc_file);
+ break;
+ }
+
+ return NULL;
+}
+
+static __be32
+nfs4_check_olstateid(struct svc_fh *fhp, struct nfs4_ol_stateid *ols, int flags)
+{
+ __be32 status;
+
+ status = nfs4_check_fh(fhp, ols);
+ if (status)
+ return status;
+ status = nfsd4_check_openowner_confirmed(ols);
+ if (status)
+ return status;
+ return nfs4_check_openmode(ols, flags);
+}
+
/*
-* Checks for stateid operations
-*/
+ * Checks for stateid operations
+ */
__be32
nfs4_preprocess_stateid_op(struct net *net, struct nfsd4_compound_state *cstate,
stateid_t *stateid, int flags, struct file **filpp)
{
- struct nfs4_stid *s;
- struct nfs4_ol_stateid *stp = NULL;
- struct nfs4_delegation *dp = NULL;
- struct svc_fh *current_fh = &cstate->current_fh;
- struct inode *ino = d_inode(current_fh->fh_dentry);
+ struct svc_fh *fhp = &cstate->current_fh;
+ struct inode *ino = d_inode(fhp->fh_dentry);
struct nfsd_net *nn = net_generic(net, nfsd_net_id);
- struct file *file = NULL;
+ struct nfs4_stid *s;
__be32 status;
if (filpp)
@@ -4597,60 +4628,36 @@ nfs4_preprocess_stateid_op(struct net *n
return nfserr_grace;
if (ZERO_STATEID(stateid) || ONE_STATEID(stateid))
- return check_special_stateids(net, current_fh, stateid, flags);
+ return check_special_stateids(net, fhp, stateid, flags);
status = nfsd4_lookup_stateid(cstate, stateid,
NFS4_DELEG_STID|NFS4_OPEN_STID|NFS4_LOCK_STID,
&s, nn);
if (status)
return status;
- status = check_stateid_generation(stateid, &s->sc_stateid, nfsd4_has_session(cstate));
+ status = check_stateid_generation(stateid, &s->sc_stateid,
+ nfsd4_has_session(cstate));
if (status)
goto out;
+
switch (s->sc_type) {
case NFS4_DELEG_STID:
- dp = delegstateid(s);
- status = nfs4_check_delegmode(dp, flags);
- if (status)
- goto out;
- if (filpp) {
- file = dp->dl_stid.sc_file->fi_deleg_file;
- if (!file) {
- WARN_ON_ONCE(1);
- status = nfserr_serverfault;
- goto out;
- }
- get_file(file);
- }
+ status = nfs4_check_delegmode(delegstateid(s), flags);
break;
case NFS4_OPEN_STID:
case NFS4_LOCK_STID:
- stp = openlockstateid(s);
- status = nfs4_check_fh(current_fh, stp);
- if (status)
- goto out;
- status = nfsd4_check_openowner_confirmed(stp);
- if (status)
- goto out;
- status = nfs4_check_openmode(stp, flags);
- if (status)
- goto out;
- if (filpp) {
- struct nfs4_file *fp = stp->st_stid.sc_file;
-
- if (flags & RD_STATE)
- file = find_readable_file(fp);
- else
- file = find_writeable_file(fp);
- }
+ status = nfs4_check_olstateid(fhp, openlockstateid(s), flags);
break;
default:
status = nfserr_bad_stateid;
- goto out;
+ break;
+ }
+
+ if (!status && filpp) {
+ *filpp = nfs4_find_file(s, flags);
+ if (!*filpp)
+ status = nfserr_serverfault;
}
- status = nfs_ok;
- if (file)
- *filpp = file;
out:
nfs4_put_stid(s);
return status;
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Layton <[email protected]>
commit 8fcd461db7c09337b6d2e22d25eb411123f379e3 upstream.
Currently, preprocess_stateid_op calls nfs4_check_olstateid which
verifies that the open stateid corresponds to the current filehandle in the
call by calling nfs4_check_fh.
If the stateid is a NFS4_DELEG_STID however, then no such check is done.
This could cause incorrect enforcement of permissions, because the
nfsd_permission() call in nfs4_check_file uses current the current
filehandle, but any subsequent IO operation will use the file descriptor
in the stateid.
Move the call to nfs4_check_fh into nfs4_check_file instead so that it
can be done for all stateid types.
Signed-off-by: Jeff Layton <[email protected]>
[bfields: moved fh check to avoid NULL deref in special stateid case]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4state.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4397,9 +4397,9 @@ laundromat_main(struct work_struct *laun
queue_delayed_work(laundry_wq, &nn->laundromat_work, t*HZ);
}
-static inline __be32 nfs4_check_fh(struct svc_fh *fhp, struct nfs4_ol_stateid *stp)
+static inline __be32 nfs4_check_fh(struct svc_fh *fhp, struct nfs4_stid *stp)
{
- if (!fh_match(&fhp->fh_handle, &stp->st_stid.sc_file->fi_fhandle))
+ if (!fh_match(&fhp->fh_handle, &stp->sc_file->fi_fhandle))
return nfserr_bad_stateid;
return nfs_ok;
}
@@ -4599,9 +4599,6 @@ nfs4_check_olstateid(struct svc_fh *fhp,
{
__be32 status;
- status = nfs4_check_fh(fhp, ols);
- if (status)
- return status;
status = nfsd4_check_openowner_confirmed(ols);
if (status)
return status;
@@ -4652,6 +4649,9 @@ nfs4_preprocess_stateid_op(struct net *n
status = nfserr_bad_stateid;
break;
}
+ if (status)
+ goto out;
+ status = nfs4_check_fh(fhp, s);
if (!status && filpp) {
*filpp = nfs4_find_file(s, flags);
@@ -4761,7 +4761,7 @@ static __be32 nfs4_seqid_op_checks(struc
status = check_stateid_generation(stateid, &stp->st_stid.sc_stateid, nfsd4_has_session(cstate));
if (status)
return status;
- return nfs4_check_fh(current_fh, stp);
+ return nfs4_check_fh(current_fh, &stp->st_stid);
}
/*
On 08/14/2015 11:41 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.1.6 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Aug 16 17:41:54 UTC 2015.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.6-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
[email protected] | (970) 217-8978
On Fri, Aug 14, 2015 at 06:10:49PM -0600, Shuah Khan wrote:
> On 08/14/2015 11:41 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.1.6 release.
> > There are 84 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Aug 16 17:41:54 UTC 2015.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.6-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
On Fri, Aug 14, 2015 at 10:41:28AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.1.6 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Aug 16 17:41:54 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
total: 138 pass: 138 fail: 0
Qemu test results:
total: 84 pass: 83 fail: 1
Failed tests:
mips:fuloong2e_defconfig
The fix for the qemu test failure is still pending acceptance and integration
upstream.
Details are available at http://server.roeck-us.net:8010/builders/.
Guenter
On Sat, Aug 15, 2015 at 08:21:43AM -0700, Guenter Roeck wrote:
> On Fri, Aug 14, 2015 at 10:41:28AM -0700, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.1.6 release.
> > There are 84 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Aug 16 17:41:54 UTC 2015.
> > Anything received after that time might be too late.
> >
> Build results:
> total: 138 pass: 138 fail: 0
> Qemu test results:
> total: 84 pass: 83 fail: 1
> Failed tests:
> mips:fuloong2e_defconfig
>
> The fix for the qemu test failure is still pending acceptance and integration
> upstream.
>
> Details are available at http://server.roeck-us.net:8010/builders/.
Thanks for testing all of these and letting me know.
greg k-h