This is the start of the stable review cycle for the 3.10.87 release.
There are 35 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Aug 16 17:43:46 UTC 2015.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.87-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.10.87-rc1
Michal Hocko <[email protected]>
mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations
NeilBrown <[email protected]>
md/bitmap: return an error when bitmap superblock is corrupt.
Paolo Bonzini <[email protected]>
kvm: x86: fix kvm_apic_has_events to check for NULL pointer
Amanieu d'Antras <[email protected]>
signal: fix information leak in copy_siginfo_from_user32
Amanieu d'Antras <[email protected]>
signal: fix information leak in copy_siginfo_to_user
Amanieu d'Antras <[email protected]>
signalfd: fix information leak in signalfd_copyinfo
Fabio Estevam <[email protected]>
ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
Russell King <[email protected]>
ARM: Fix FIQ code on VIVT CPUs
Russell King <[email protected]>
ARM: Fix !kuser helpers case
Al Viro <[email protected]>
sg_start_req(): make sure that there's not too many elements in iovec
NeilBrown <[email protected]>
md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies
Joseph Qi <[email protected]>
ocfs2: fix BUG in ocfs2_downconvert_thread_do_work()
Marcus Gelderie <[email protected]>
ipc: modify message queue accounting to not take kernel data structures into account
Dan Carpenter <[email protected]>
ALSA: hda - fix cs4210_spdif_automute()
Nicholas Bellinger <[email protected]>
iscsi-target: Fix iscsit_start_kthreads failure OOPs
Ilya Dryomov <[email protected]>
rbd: fix copyup completion race
Herbert Xu <[email protected]>
crypto: ixp4xx - Remove bogus BUG_ON on scattered dst buffer
Marek Marczykowski-Górecki <[email protected]>
xen/gntdevt: Fix race condition in gntdev_release()
Andy Lutomirski <[email protected]>
x86/xen: Probe target addresses in set_aliased_prot() before the hypercall
David S. Miller <[email protected]>
sparc64: Fix userspace FPU register corruptions.
David S. Miller <[email protected]>
sparc64: Fix FPU register corruption with AES crypto offload.
Peter Zijlstra <[email protected]>
perf/x86/amd: Rework AMD PMU init code
Guenter Roeck <[email protected]>
mfd: sm501: dbg_regs attribute must be read-only
Xie XiuQi <[email protected]>
ipmi: fix timeout calculation when bmc is disconnected
Benjamin Randazzo <[email protected]>
md: use kzalloc() when bitmap is disabled
Dirk Behme <[email protected]>
USB: sierra: add 1199:68AB device ID
Mathias Nyman <[email protected]>
xhci: fix off by one error in TRB DMA address boundary check
Brian King <[email protected]>
ipr: Fix invalid array indexing for HRRQ
Brian King <[email protected]>
ipr: Fix incorrect trace indexing
Brian King <[email protected]>
ipr: Fix locking for unit attention handling
Alex Deucher <[email protected]>
drm/radeon/combios: add some validation of lvds values
Jan Kara <[email protected]>
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
David Daney <[email protected]>
MIPS: Make set_pte() SMP safe.
Felix Fietkau <[email protected]>
MIPS: Fix sched_getaffinity with MT FPAFF enabled
Arnd Bergmann <[email protected]>
ARM: realview: fix sparsemem build
-------------
Diffstat:
Makefile | 4 +-
arch/arm/kernel/entry-armv.S | 3 +-
arch/arm/kernel/fiq.c | 9 ++--
arch/arm/mach-realview/include/mach/memory.h | 2 +
arch/arm64/kernel/signal32.c | 5 +--
arch/mips/include/asm/pgtable.h | 31 +++++++++++++
arch/mips/kernel/mips-mt-fpaff.c | 5 ++-
arch/mips/kernel/signal32.c | 2 -
arch/powerpc/kernel/signal_32.c | 2 -
arch/sparc/include/asm/visasm.h | 18 ++++----
arch/sparc/lib/NG4memcpy.S | 19 +++++++-
arch/sparc/lib/VISsave.S | 67 +---------------------------
arch/sparc/lib/ksyms.c | 4 --
arch/x86/kernel/cpu/perf_event_amd.c | 34 +++++++-------
arch/x86/kvm/lapic.h | 2 +-
arch/x86/xen/enlighten.c | 40 +++++++++++++++++
drivers/block/rbd.c | 22 ++++++---
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
drivers/crypto/ixp4xx_crypto.c | 1 -
drivers/gpu/drm/radeon/radeon_combios.c | 7 ++-
drivers/md/bitmap.c | 2 +
drivers/md/md.c | 4 +-
drivers/md/raid1.c | 10 +++--
drivers/mfd/sm501.c | 2 +-
drivers/scsi/ipr.c | 28 +++++++-----
drivers/scsi/ipr.h | 1 +
drivers/scsi/sg.c | 3 ++
drivers/target/iscsi/iscsi_target.c | 18 ++++++--
drivers/target/iscsi/iscsi_target_core.h | 1 +
drivers/target/iscsi/iscsi_target_login.c | 43 +++++++-----------
drivers/target/iscsi/iscsi_target_login.h | 1 +
drivers/target/iscsi/iscsi_target_nego.c | 34 +++++++++++++-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/sierra.c | 1 +
drivers/xen/gntdev.c | 2 +
fs/notify/mark.c | 30 ++++++++++---
fs/ocfs2/dlmglue.c | 10 +++--
fs/signalfd.c | 5 ++-
ipc/mqueue.c | 5 ---
kernel/signal.c | 7 +--
mm/vmscan.c | 2 +-
sound/pci/hda/patch_cirrus.c | 4 +-
42 files changed, 300 insertions(+), 194 deletions(-)
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit dd94d3558947756b102b1487911acd925224a38c upstream.
Commit b713aa0b15 "ARM: fix asm/memory.h build error" broke some
configurations on mach-realview with sparsemem enabled, which
is missing a definition of PHYS_OFFSET:
arch/arm/include/asm/memory.h:268:42: error: 'PHYS_OFFSET' undeclared (first use in this function)
#define PHYS_PFN_OFFSET ((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
arch/arm/include/asm/dma-mapping.h:104:9: note: in expansion of macro 'PHYS_PFN_OFFSET'
return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
An easy workaround is for realview to define PHYS_OFFSET itself,
in the same way we define it for platforms that don't have a private
__virt_to_phys function.
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Russell King <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-realview/include/mach/memory.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -56,6 +56,8 @@
#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000)
#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000)
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
#define __phys_to_virt(phys) \
((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \
(phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 1d62d737555e1378eb62a8bba26644f7d97139d2 upstream.
p->thread.user_cpus_allowed is zero-initialized and is only filled on
the first sched_setaffinity call.
To avoid adding overhead in the task initialization codepath, simply OR
the returned mask in sched_getaffinity with p->cpus_allowed.
Signed-off-by: Felix Fietkau <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10740/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/mips-mt-fpaff.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
unsigned long __user *user_mask_ptr)
{
unsigned int real_len;
- cpumask_t mask;
+ cpumask_t allowed, mask;
int retval;
struct task_struct *p;
@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
if (retval)
goto out_unlock;
- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
+ cpumask_and(&mask, &allowed, cpu_active_mask);
out_unlock:
read_unlock(&tasklist_lock);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Daney <[email protected]>
commit 46011e6ea39235e4aca656673c500eac81a07a17 upstream.
On MIPS the GLOBAL bit of the PTE must have the same value in any
aligned pair of PTEs. These pairs of PTEs are referred to as
"buddies". In a SMP system is is possible for two CPUs to be calling
set_pte() on adjacent PTEs at the same time. There is a race between
setting the PTE and a different CPU setting the GLOBAL bit in its
buddy PTE.
This race can be observed when multiple CPUs are executing
vmap()/vfree() at the same time.
Make setting the buddy PTE's GLOBAL bit an atomic operation to close
the race condition.
The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not*
handled.
Signed-off-by: David Daney <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10835/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/pgtable.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -150,8 +150,39 @@ static inline void set_pte(pte_t *ptep,
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
+#ifdef CONFIG_SMP
+ /*
+ * For SMP, multiple CPUs can race, so we need to do
+ * this atomically.
+ */
+#ifdef CONFIG_64BIT
+#define LL_INSN "lld"
+#define SC_INSN "scd"
+#else /* CONFIG_32BIT */
+#define LL_INSN "ll"
+#define SC_INSN "sc"
+#endif
+ unsigned long page_global = _PAGE_GLOBAL;
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+ " .set push\n"
+ " .set noreorder\n"
+ "1: " LL_INSN " %[tmp], %[buddy]\n"
+ " bnez %[tmp], 2f\n"
+ " or %[tmp], %[tmp], %[global]\n"
+ " " SC_INSN " %[tmp], %[buddy]\n"
+ " beqz %[tmp], 1b\n"
+ " nop\n"
+ "2:\n"
+ " .set pop"
+ : [buddy] "+m" (buddy->pte),
+ [tmp] "=&r" (tmp)
+ : [global] "r" (page_global));
+#else /* !CONFIG_SMP */
if (pte_none(*buddy))
pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+#endif /* CONFIG_SMP */
}
#endif
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 8f2f3eb59dff4ec538de55f2e0592fec85966aab upstream.
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so that when fsnotify_destroy_mark_locked()
drops mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and thus the next
entry pointer we have cached may become stale and we dereference free
memory.
Fix the problem by first moving marks to free to a special private list
and then always free the first entry in the special list. This method
is safe even when entries from the list can disappear once we drop the
lock.
Signed-off-by: Jan Kara <[email protected]>
Reported-by: Ashish Sangwan <[email protected]>
Reviewed-by: Ashish Sangwan <[email protected]>
Cc: Lino Sanfilippo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/notify/mark.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -299,16 +299,36 @@ void fsnotify_clear_marks_by_group_flags
unsigned int flags)
{
struct fsnotify_mark *lmark, *mark;
+ LIST_HEAD(to_free);
+ /*
+ * We have to be really careful here. Anytime we drop mark_mutex, e.g.
+ * fsnotify_clear_marks_by_inode() can come and free marks. Even in our
+ * to_free list so we have to use mark_mutex even when accessing that
+ * list. And freeing mark requires us to drop mark_mutex. So we can
+ * reliably free only the first mark in the list. That's why we first
+ * move marks to free to to_free list in one go and then free marks in
+ * to_free list one by one.
+ */
mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);
list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) {
- if (mark->flags & flags) {
- fsnotify_get_mark(mark);
- fsnotify_destroy_mark_locked(mark, group);
- fsnotify_put_mark(mark);
- }
+ if (mark->flags & flags)
+ list_move(&mark->g_list, &to_free);
}
mutex_unlock(&group->mark_mutex);
+
+ while (1) {
+ mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);
+ if (list_empty(&to_free)) {
+ mutex_unlock(&group->mark_mutex);
+ break;
+ }
+ mark = list_first_entry(&to_free, struct fsnotify_mark, g_list);
+ fsnotify_get_mark(mark);
+ fsnotify_destroy_mark_locked(mark, group);
+ mutex_unlock(&group->mark_mutex);
+ fsnotify_put_mark(mark);
+ }
}
/*
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 0a90a0cff9f429f886f423967ae053150dce9259 upstream.
Fixes a broken hsync start value uncovered by:
abc0b1447d4974963548777a5ba4a4457c82c426
(drm: Perform basic sanity checks on probed modes)
The driver handled the bad hsync start elsewhere, but
the above commit prevented it from getting added.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91401
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_combios.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1271,10 +1271,15 @@ struct radeon_encoder_lvds *radeon_combi
if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) &&
(RBIOS16(tmp + 2) == lvds->native_mode.vdisplay)) {
+ u32 hss = (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - 1) * 8;
+
+ if (hss > lvds->native_mode.hdisplay)
+ hss = (10 - 1) * 8;
+
lvds->native_mode.htotal = lvds->native_mode.hdisplay +
(RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8;
lvds->native_mode.hsync_start = lvds->native_mode.hdisplay +
- (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - 1) * 8;
+ hss;
lvds->native_mode.hsync_end = lvds->native_mode.hsync_start +
(RBIOS8(tmp + 23) * 8);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit 36b8e180e1e929e00b351c3b72aab3147fc14116 upstream.
Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes
a crash seen as the __devices list in the scsi host was changing as we were
iterating through it.
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6141,21 +6141,23 @@ static void ipr_scsi_done(struct ipr_cmn
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
- unsigned long hrrq_flags;
+ unsigned long lock_flags;
scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->s.ioasa.hdr.residual_data_len));
if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
scsi_dma_unmap(scsi_cmd);
- spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_lock_irqsave(ipr_cmd->hrrq->lock, lock_flags);
list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
scsi_cmd->scsi_done(scsi_cmd);
- spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_unlock_irqrestore(ipr_cmd->hrrq->lock, lock_flags);
} else {
- spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ spin_lock(&ipr_cmd->hrrq->_lock);
ipr_erp_start(ioa_cfg, ipr_cmd);
- spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags);
+ spin_unlock(&ipr_cmd->hrrq->_lock);
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
}
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit bb7c54339e6a10ecce5c4961adf5e75b3cf0af30 upstream.
When ipr's internal driver trace was changed to an atomic, a signed/unsigned
bug slipped in which results in us indexing backwards in our memory buffer
writing on memory that does not belong to us. This patch fixes this by removing
the modulo and instead just mask off the low bits.
Tested-by: Wen Xiong <[email protected]>
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 5 +++--
drivers/scsi/ipr.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -554,9 +554,10 @@ static void ipr_trc_hook(struct ipr_cmnd
{
struct ipr_trace_entry *trace_entry;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+ unsigned int trace_index;
- trace_entry = &ioa_cfg->trace[atomic_add_return
- (1, &ioa_cfg->trace_index)%IPR_NUM_TRACE_ENTRIES];
+ trace_index = atomic_add_return(1, &ioa_cfg->trace_index) & IPR_TRACE_INDEX_MASK;
+ trace_entry = &ioa_cfg->trace[trace_index];
trace_entry->time = jiffies;
trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
trace_entry->type = type;
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1452,6 +1452,7 @@ struct ipr_ioa_cfg {
#define IPR_NUM_TRACE_INDEX_BITS 8
#define IPR_NUM_TRACE_ENTRIES (1 << IPR_NUM_TRACE_INDEX_BITS)
+#define IPR_TRACE_INDEX_MASK (IPR_NUM_TRACE_ENTRIES - 1)
#define IPR_TRACE_SIZE (sizeof(struct ipr_trace_entry) * IPR_NUM_TRACE_ENTRIES)
char trace_start[8];
#define IPR_TRACE_START_LABEL "trace"
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian King <[email protected]>
commit 3f1c0581310d5d94bd72740231507e763a6252a4 upstream.
Fixes another signed / unsigned array indexing bug in the ipr driver.
Currently, when hrrq_index wraps, it becomes a negative number. We
do the modulo, but still have a negative number, so we end up indexing
backwards in the array. Given where the hrrq array is located in memory,
we probably won't actually reference memory we don't own, but nonetheless
ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as
struct ipr_hrr_queue data, so bad things could certainly happen.
Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new
adapters. Let's take an example:
Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4:
The atomic_add_return will then return -1. We mod this with 3 and get -2, add
one and get -1 for an array index.
On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter
initialization and error interrupts so that we can optimize the other queues
for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the
I/O requests across those HRRQs.
With the default module parameter settings, this bug won't hit, only when
someone sets the ipr.number_of_msix parameter to a value larger than 3 is when
bad things start to happen.
Tested-by: Wen Xiong <[email protected]>
Reviewed-by: Wen Xiong <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Brian King <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ipr.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1007,10 +1007,15 @@ static void ipr_send_blocking_cmd(struct
static int ipr_get_hrrq_index(struct ipr_ioa_cfg *ioa_cfg)
{
+ unsigned int hrrq;
+
if (ioa_cfg->hrrq_num == 1)
- return 0;
- else
- return (atomic_add_return(1, &ioa_cfg->hrrq_index) % (ioa_cfg->hrrq_num - 1)) + 1;
+ hrrq = 0;
+ else {
+ hrrq = atomic_add_return(1, &ioa_cfg->hrrq_index);
+ hrrq = (hrrq % (ioa_cfg->hrrq_num - 1)) + 1;
+ }
+ return hrrq;
}
/**
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dirk Behme <[email protected]>
commit 74472233233f577eaa0ca6d6e17d9017b6e53150 upstream.
Add support for the Sierra Wireless AR8550 device with
USB descriptor 0x1199, 0x68AB.
It is common with MC879x modules 1199:683c/683d which
also are composite devices with 7 interfaces (0..6)
and also MDM62xx based as the AR8550.
The major difference are only the interface attributes
02/02/01 on interfaces 3 and 4 on the AR8550. They are
vendor specific ff/ff/ff on MC879x modules.
lsusb reports:
Bus 001 Device 004: ID 1199:68ab Sierra Wireless, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x68ab
bcdDevice 0.06
iManufacturer 3 Sierra Wireless, Incorporated
iProduct 2 AR8550
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 198
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 1 Sierra Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8b EP 11 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Signed-off-by: Dirk Behme <[email protected]>
Cc: Lars Melin <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/sierra.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Randazzo <[email protected]>
commit b6878d9e03043695dbf3fa1caa6dfc09db225b16 upstream.
In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a
mdu_bitmap_file_t called "file".
5769 file = kmalloc(sizeof(*file), GFP_NOIO);
5770 if (!file)
5771 return -ENOMEM;
This structure is copied to user space at the end of the function.
5786 if (err == 0 &&
5787 copy_to_user(arg, file, sizeof(*file)))
5788 err = -EFAULT
But if bitmap is disabled only the first byte of "file" is initialized
with zero, so it's possible to read some bytes (up to 4095) of kernel
space memory from user space. This is an information leak.
5775 /* bitmap disabled, zero the first byte and copy out */
5776 if (!mddev->bitmap_info.file)
5777 file->pathname[0] = '\0';
Signed-off-by: Benjamin Randazzo <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5628,9 +5628,9 @@ static int get_bitmap_file(struct mddev
int err = -ENOMEM;
if (md_allow_write(mddev))
- file = kmalloc(sizeof(*file), GFP_NOIO);
+ file = kzalloc(sizeof(*file), GFP_NOIO);
else
- file = kmalloc(sizeof(*file), GFP_KERNEL);
+ file = kzalloc(sizeof(*file), GFP_KERNEL);
if (!file)
goto out;
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xie XiuQi <[email protected]>
commit e21404dc0ac7ac971c1e36274b48bb460463f4e5 upstream.
Loading ipmi_si module while bmc is disconnected, we found the timeout
is longer than 5 secs. Actually it takes about 3 mins and 20
secs.(HZ=250)
error message as below:
Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left
Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01
[...]
Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ]
Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response
Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs)
Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ]
Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to
sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100
usecs from timeout.
Reported-by: Hu Shiyuan <[email protected]>
Signed-off-by: Xie XiuQi <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2717,7 +2717,7 @@ static int wait_for_msg_done(struct smi_
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
schedule_timeout_uninterruptible(1);
smi_result = smi_info->handlers->event(
- smi_info->si_sm, 100);
+ smi_info->si_sm, jiffies_to_usecs(1));
} else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
smi_result = smi_info->handlers->event(
smi_info->si_sm, 0);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 8a8320c2e78d1b619a8fa8eb5ae946b8691de604 upstream.
Fix:
sm501 sm501: SM501 At b3e00000: Version 050100a0, 8 Mb, IRQ 100
Attribute dbg_regs: write permission without 'store'
------------[ cut here ]------------
WARNING: at drivers/base/core.c:620
dbg_regs does not have a write function and must therefore be marked
as read-only.
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mfd/sm501.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1232,7 +1232,7 @@ static ssize_t sm501_dbg_regs(struct dev
}
-static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
+static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
/* sm501_init_reg
*
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit 1b45adcd9a503428e6de6b39bc6892d86c9c1d41 upstream.
Josh reported that his QEMU is a bad hardware emulator and trips a
WARN in the AMD PMU init code. He requested the WARN be turned into a
pr_err() or similar.
While there, rework the code a little.
Reported-by: Josh Boyer <[email protected]>
Acked-by: Robert Richter <[email protected]>
Acked-by: Jacob Shin <[email protected]>
Cc: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/perf_event_amd.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -648,48 +648,48 @@ static __initconst const struct x86_pmu
.cpu_dead = amd_pmu_cpu_dead,
};
-static int setup_event_constraints(void)
+static int __init amd_core_pmu_init(void)
{
- if (boot_cpu_data.x86 == 0x15)
+ if (!cpu_has_perfctr_core)
+ return 0;
+
+ switch (boot_cpu_data.x86) {
+ case 0x15:
+ pr_cont("Fam15h ");
x86_pmu.get_event_constraints = amd_get_event_constraints_f15h;
- return 0;
-}
+ break;
-static int setup_perfctr_core(void)
-{
- if (!cpu_has_perfctr_core) {
- WARN(x86_pmu.get_event_constraints == amd_get_event_constraints_f15h,
- KERN_ERR "Odd, counter constraints enabled but no core perfctrs detected!");
+ default:
+ pr_err("core perfctr but no constraints; unknown hardware!\n");
return -ENODEV;
}
- WARN(x86_pmu.get_event_constraints == amd_get_event_constraints,
- KERN_ERR "hw perf events core counters need constraints handler!");
-
/*
* If core performance counter extensions exists, we must use
* MSR_F15H_PERF_CTL/MSR_F15H_PERF_CTR msrs. See also
- * x86_pmu_addr_offset().
+ * amd_pmu_addr_offset().
*/
x86_pmu.eventsel = MSR_F15H_PERF_CTL;
x86_pmu.perfctr = MSR_F15H_PERF_CTR;
x86_pmu.num_counters = AMD64_NUM_COUNTERS_CORE;
- printk(KERN_INFO "perf: AMD core performance counters detected\n");
-
+ pr_cont("core perfctr, ");
return 0;
}
__init int amd_pmu_init(void)
{
+ int ret;
+
/* Performance-monitoring supported from K7 and later: */
if (boot_cpu_data.x86 < 6)
return -ENODEV;
x86_pmu = amd_pmu;
- setup_event_constraints();
- setup_perfctr_core();
+ ret = amd_core_pmu_init();
+ if (ret)
+ return ret;
/* Events are common for all AMDs */
memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit f4da3628dc7c32a59d1fb7116bb042e6f436d611 ]
The AES loops in arch/sparc/crypto/aes_glue.c use a scheme where the
key material is preloaded into the FPU registers, and then we loop
over and over doing the crypt operation, reusing those pre-cooked key
registers.
There are intervening blkcipher*() calls between the crypt operation
calls. And those might perform memcpy() and thus also try to use the
FPU.
The sparc64 kernel FPU usage mechanism is designed to allow such
recursive uses, but with a catch.
There has to be a trap between the two FPU using threads of control.
The mechanism works by, when the FPU is already in use by the kernel,
allocating a slot for FPU saving at trap time. Then if, within the
trap handler, we try to use the FPU registers, the pre-trap FPU
register state is saved into the slot. Then at trap return time we
notice this and restore the pre-trap FPU state.
Over the long term there are various more involved ways we can make
this work, but for a quick fix let's take advantage of the fact that
the situation where this happens is very limited.
All sparc64 chips that support the crypto instructiosn also are using
the Niagara4 memcpy routine, and that routine only uses the FPU for
large copies where we can't get the source aligned properly to a
multiple of 8 bytes.
We look to see if the FPU is already in use in this context, and if so
we use the non-large copy path which only uses integer registers.
Furthermore, we also limit this special logic to when we are doing
kernel copy, rather than a user copy.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/include/asm/visasm.h | 8 ++++++++
arch/sparc/lib/NG4memcpy.S | 14 +++++++++++++-
2 files changed, 21 insertions(+), 1 deletion(-)
--- a/arch/sparc/include/asm/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
@@ -39,6 +39,14 @@
297: wr %o5, FPRS_FEF, %fprs; \
298:
+#define VISEntryHalfFast(fail_label) \
+ rd %fprs, %o5; \
+ andcc %o5, FPRS_FEF, %g0; \
+ be,pt %icc, 297f; \
+ nop; \
+ ba,a,pt %xcc, fail_label; \
+297: wr %o5, FPRS_FEF, %fprs;
+
#define VISExitHalf \
wr %o5, 0, %fprs;
--- a/arch/sparc/lib/NG4memcpy.S
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -41,6 +41,10 @@
#endif
#endif
+#if !defined(EX_LD) && !defined(EX_ST)
+#define NON_USER_COPY
+#endif
+
#ifndef EX_LD
#define EX_LD(x) x
#endif
@@ -197,9 +201,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len
mov EX_RETVAL(%o3), %o0
.Llarge_src_unaligned:
+#ifdef NON_USER_COPY
+ VISEntryHalfFast(.Lmedium_vis_entry_fail)
+#else
+ VISEntryHalf
+#endif
andn %o2, 0x3f, %o4
sub %o2, %o4, %o2
- VISEntryHalf
alignaddr %o1, %g0, %g1
add %o1, %o4, %o1
EX_LD(LOAD(ldd, %g1 + 0x00, %f0))
@@ -240,6 +248,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len
nop
ba,a,pt %icc, .Lmedium_unaligned
+#ifdef NON_USER_COPY
+.Lmedium_vis_entry_fail:
+ or %o0, %o1, %g2
+#endif
.Lmedium:
LOAD(prefetch, %o1 + 0x40, #n_reads_strong)
andcc %g2, 0x7, %g0
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit 44922150d87cef616fd183220d43d8fde4d41390 ]
If we have a series of events from userpsace, with %fprs=FPRS_FEF,
like follows:
ETRAP
ETRAP
VIS_ENTRY(fprs=0x4)
VIS_EXIT
RTRAP (kernel FPU restore with fpu_saved=0x4)
RTRAP
We will not restore the user registers that were clobbered by the FPU
using kernel code in the inner-most trap.
Traps allocate FPU save slots in the thread struct, and FPU using
sequences save the "dirty" FPU registers only.
This works at the initial trap level because all of the registers
get recorded into the top-level FPU save area, and we'll return
to userspace with the FPU disabled so that any FPU use by the user
will take an FPU disabled trap wherein we'll load the registers
back up properly.
But this is not how trap returns from kernel to kernel operate.
The simplest fix for this bug is to always save all FPU register state
for anything other than the top-most FPU save area.
Getting rid of the optimized inner-slot FPU saving code ends up
making VISEntryHalf degenerate into plain VISEntry.
Longer term we need to do something smarter to reinstate the partial
save optimizations. Perhaps the fundament error is having trap entry
and exit allocate FPU save slots and restore register state. Instead,
the VISEntry et al. calls should be doing that work.
This bug is about two decades old.
Reported-by: James Y Knight <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/include/asm/visasm.h | 16 ++-------
arch/sparc/lib/NG4memcpy.S | 5 ++
arch/sparc/lib/VISsave.S | 67 +---------------------------------------
arch/sparc/lib/ksyms.c | 4 --
4 files changed, 11 insertions(+), 81 deletions(-)
--- a/arch/sparc/include/asm/visasm.h
+++ b/arch/sparc/include/asm/visasm.h
@@ -28,16 +28,10 @@
* Must preserve %o5 between VISEntryHalf and VISExitHalf */
#define VISEntryHalf \
- rd %fprs, %o5; \
- andcc %o5, FPRS_FEF, %g0; \
- be,pt %icc, 297f; \
- sethi %hi(298f), %g7; \
- sethi %hi(VISenterhalf), %g1; \
- jmpl %g1 + %lo(VISenterhalf), %g0; \
- or %g7, %lo(298f), %g7; \
- clr %o5; \
-297: wr %o5, FPRS_FEF, %fprs; \
-298:
+ VISEntry
+
+#define VISExitHalf \
+ VISExit
#define VISEntryHalfFast(fail_label) \
rd %fprs, %o5; \
@@ -47,7 +41,7 @@
ba,a,pt %xcc, fail_label; \
297: wr %o5, FPRS_FEF, %fprs;
-#define VISExitHalf \
+#define VISExitHalfFast \
wr %o5, 0, %fprs;
#ifndef __ASSEMBLY__
--- a/arch/sparc/lib/NG4memcpy.S
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -240,8 +240,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len
add %o0, 0x40, %o0
bne,pt %icc, 1b
LOAD(prefetch, %g1 + 0x200, #n_reads_strong)
+#ifdef NON_USER_COPY
+ VISExitHalfFast
+#else
VISExitHalf
-
+#endif
brz,pn %o2, .Lexit
cmp %o2, 19
ble,pn %icc, .Lsmall_unaligned
--- a/arch/sparc/lib/VISsave.S
+++ b/arch/sparc/lib/VISsave.S
@@ -44,9 +44,8 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
stx %g3, [%g6 + TI_GSR]
2: add %g6, %g1, %g3
- cmp %o5, FPRS_DU
- be,pn %icc, 6f
- sll %g1, 3, %g1
+ mov FPRS_DU | FPRS_DL | FPRS_FEF, %o5
+ sll %g1, 3, %g1
stb %o5, [%g3 + TI_FPSAVED]
rd %gsr, %g2
add %g6, %g1, %g3
@@ -80,65 +79,3 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3
.align 32
80: jmpl %g7 + %g0, %g0
nop
-
-6: ldub [%g3 + TI_FPSAVED], %o5
- or %o5, FPRS_DU, %o5
- add %g6, TI_FPREGS+0x80, %g2
- stb %o5, [%g3 + TI_FPSAVED]
-
- sll %g1, 5, %g1
- add %g6, TI_FPREGS+0xc0, %g3
- wr %g0, FPRS_FEF, %fprs
- membar #Sync
- stda %f32, [%g2 + %g1] ASI_BLK_P
- stda %f48, [%g3 + %g1] ASI_BLK_P
- membar #Sync
- ba,pt %xcc, 80f
- nop
-
- .align 32
-80: jmpl %g7 + %g0, %g0
- nop
-
- .align 32
-VISenterhalf:
- ldub [%g6 + TI_FPDEPTH], %g1
- brnz,a,pn %g1, 1f
- cmp %g1, 1
- stb %g0, [%g6 + TI_FPSAVED]
- stx %fsr, [%g6 + TI_XFSR]
- clr %o5
- jmpl %g7 + %g0, %g0
- wr %g0, FPRS_FEF, %fprs
-
-1: bne,pn %icc, 2f
- srl %g1, 1, %g1
- ba,pt %xcc, vis1
- sub %g7, 8, %g7
-2: addcc %g6, %g1, %g3
- sll %g1, 3, %g1
- andn %o5, FPRS_DU, %g2
- stb %g2, [%g3 + TI_FPSAVED]
-
- rd %gsr, %g2
- add %g6, %g1, %g3
- stx %g2, [%g3 + TI_GSR]
- add %g6, %g1, %g2
- stx %fsr, [%g2 + TI_XFSR]
- sll %g1, 5, %g1
-3: andcc %o5, FPRS_DL, %g0
- be,pn %icc, 4f
- add %g6, TI_FPREGS, %g2
-
- add %g6, TI_FPREGS+0x40, %g3
- membar #Sync
- stda %f0, [%g2 + %g1] ASI_BLK_P
- stda %f16, [%g3 + %g1] ASI_BLK_P
- membar #Sync
- ba,pt %xcc, 4f
- nop
-
- .align 32
-4: and %o5, FPRS_DU, %o5
- jmpl %g7 + %g0, %g0
- wr %o5, FPRS_FEF, %fprs
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -126,10 +126,6 @@ EXPORT_SYMBOL(copy_user_page);
void VISenter(void);
EXPORT_SYMBOL(VISenter);
-/* CRYPTO code needs this */
-void VISenterhalf(void);
-EXPORT_SYMBOL(VISenterhalf);
-
extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
unsigned long *);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit aa1acff356bbedfd03b544051f5b371746735d89 upstream.
The update_va_mapping hypercall can fail if the VA isn't present
in the guest's page tables. Under certain loads, this can
result in an OOPS when the target address is in unpopulated vmap
space.
While we're at it, add comments to help explain what's going on.
This isn't a great long-term fix. This code should probably be
changed to use something like set_memory_ro.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected] <[email protected]>
Cc: xen-devel <[email protected]>
Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/enlighten.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -481,6 +481,7 @@ static void set_aliased_prot(void *v, pg
pte_t pte;
unsigned long pfn;
struct page *page;
+ unsigned char dummy;
ptep = lookup_address((unsigned long)v, &level);
BUG_ON(ptep == NULL);
@@ -490,6 +491,32 @@ static void set_aliased_prot(void *v, pg
pte = pfn_pte(pfn, prot);
+ /*
+ * Careful: update_va_mapping() will fail if the virtual address
+ * we're poking isn't populated in the page tables. We don't
+ * need to worry about the direct map (that's always in the page
+ * tables), but we need to be careful about vmap space. In
+ * particular, the top level page table can lazily propagate
+ * entries between processes, so if we've switched mms since we
+ * vmapped the target in the first place, we might not have the
+ * top-level page table entry populated.
+ *
+ * We disable preemption because we want the same mm active when
+ * we probe the target and when we issue the hypercall. We'll
+ * have the same nominal mm, but if we're a kernel thread, lazy
+ * mm dropping could change our pgd.
+ *
+ * Out of an abundance of caution, this uses __get_user() to fault
+ * in the target address just in case there's some obscure case
+ * in which the target address isn't readable.
+ */
+
+ preempt_disable();
+
+ pagefault_disable(); /* Avoid warnings due to being atomic. */
+ __get_user(dummy, (unsigned char __user __force *)v);
+ pagefault_enable();
+
if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
BUG();
@@ -501,6 +528,8 @@ static void set_aliased_prot(void *v, pg
BUG();
} else
kmap_flush_unused();
+
+ preempt_enable();
}
static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
@@ -508,6 +537,17 @@ static void xen_alloc_ldt(struct desc_st
const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
int i;
+ /*
+ * We need to mark the all aliases of the LDT pages RO. We
+ * don't need to call vm_flush_aliases(), though, since that's
+ * only responsible for flushing aliases out the TLBs, not the
+ * page tables, and Xen will flush the TLB for us if needed.
+ *
+ * To avoid confusing future readers: none of this is necessary
+ * to load the LDT. The hypervisor only checks this when the
+ * LDT is faulted in due to subsequent descriptor access.
+ */
+
for(i = 0; i < entries; i += entries_per_page)
set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit f898c522f0e9ac9f3177d0762b76e2ab2d2cf9c0 upstream.
This patch removes a bogus BUG_ON in the ablkcipher path that
triggers when the destination buffer is different from the source
buffer and is scattered.
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ixp4xx_crypto.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -915,7 +915,6 @@ static int ablk_perform(struct ablkciphe
crypt->mode |= NPE_OP_NOT_IN_PLACE;
/* This was never tested by Intel
* for more than one dst buffer, I think. */
- BUG_ON(req->dst->length < nbytes);
req_ctx->dst = NULL;
if (!chainup_buffers(dev, req->dst, nbytes, &dst_hook,
flags, DMA_FROM_DEVICE))
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 2761713d35e370fd640b5781109f753066b746c4 upstream.
For write/discard obj_requests that involved a copyup method call, the
opcode of the first op is CEPH_OSD_OP_CALL and the ->callback is
rbd_img_obj_copyup_callback(). The latter frees copyup pages, sets
->xferred and delegates to rbd_img_obj_callback(), the "normal" image
object callback, for reporting to block layer and putting refs.
rbd_osd_req_callback() however treats CEPH_OSD_OP_CALL as a trivial op,
which means obj_request is marked done in rbd_osd_trivial_callback(),
*before* ->callback is invoked and rbd_img_obj_copyup_callback() has
a chance to run. Marking obj_request done essentially means giving
rbd_img_obj_callback() a license to end it at any moment, so if another
obj_request from the same img_request is being completed concurrently,
rbd_img_obj_end_request() may very well be called on such prematurally
marked done request:
<obj_request-1/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
rbd_obj_request_complete()
rbd_img_obj_copyup_callback()
rbd_img_obj_callback()
<obj_request-2/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
for_each_obj_request(obj_request->img_request) {
rbd_img_obj_end_request(obj_request-1/2)
rbd_img_obj_end_request(obj_request-2/2) <--
}
Calling rbd_img_obj_end_request() on such a request leads to trouble,
in particular because its ->xfferred is 0. We report 0 to the block
layer with blk_update_request(), get back 1 for "this request has more
data in flight" and then trip on
rbd_assert(more ^ (which == img_request->obj_request_count));
with rhs (which == ...) being 1 because rbd_img_obj_end_request() has
been called for both requests and lhs (more) being 1 because we haven't
got a chance to set ->xfferred in rbd_img_obj_copyup_callback() yet.
To fix this, leverage that rbd wants to call class methods in only two
cases: one is a generic method call wrapper (obj_request is standalone)
and the other is a copyup (obj_request is part of an img_request). So
make a dedicated handler for CEPH_OSD_OP_CALL and directly invoke
rbd_img_obj_copyup_callback() from it if obj_request is part of an
img_request, similar to how CEPH_OSD_OP_READ handler invokes
rbd_img_obj_request_read_callback().
Since rbd_img_obj_copyup_callback() is now being called from the OSD
request callback (only), it is renamed to rbd_osd_copyup_callback().
Cc: Alex Elder <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/rbd.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -457,6 +457,7 @@ void rbd_warn(struct rbd_device *rbd_dev
# define rbd_assert(expr) ((void) 0)
#endif /* !RBD_DEBUG */
+static void rbd_osd_copyup_callback(struct rbd_obj_request *obj_request);
static int rbd_img_obj_request_submit(struct rbd_obj_request *obj_request);
static void rbd_img_parent_read(struct rbd_obj_request *obj_request);
static void rbd_dev_remove_parent(struct rbd_device *rbd_dev);
@@ -1670,6 +1671,16 @@ static void rbd_osd_stat_callback(struct
obj_request_done_set(obj_request);
}
+static void rbd_osd_call_callback(struct rbd_obj_request *obj_request)
+{
+ dout("%s: obj %p\n", __func__, obj_request);
+
+ if (obj_request_img_data_test(obj_request))
+ rbd_osd_copyup_callback(obj_request);
+ else
+ obj_request_done_set(obj_request);
+}
+
static void rbd_osd_req_callback(struct ceph_osd_request *osd_req,
struct ceph_msg *msg)
{
@@ -1708,6 +1719,8 @@ static void rbd_osd_req_callback(struct
rbd_osd_stat_callback(obj_request);
break;
case CEPH_OSD_OP_CALL:
+ rbd_osd_call_callback(obj_request);
+ break;
case CEPH_OSD_OP_NOTIFY_ACK:
case CEPH_OSD_OP_WATCH:
rbd_osd_trivial_callback(obj_request);
@@ -2305,13 +2318,15 @@ out_unwind:
}
static void
-rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request)
+rbd_osd_copyup_callback(struct rbd_obj_request *obj_request)
{
struct rbd_img_request *img_request;
struct rbd_device *rbd_dev;
struct page **pages;
u32 page_count;
+ dout("%s: obj %p\n", __func__, obj_request);
+
rbd_assert(obj_request->type == OBJ_REQUEST_BIO);
rbd_assert(obj_request_img_data_test(obj_request));
img_request = obj_request->img_request;
@@ -2337,9 +2352,7 @@ rbd_img_obj_copyup_callback(struct rbd_o
if (!obj_request->result)
obj_request->xferred = obj_request->length;
- /* Finish up with the normal image object callback */
-
- rbd_img_obj_callback(obj_request);
+ obj_request_done_set(obj_request);
}
static void
@@ -2436,7 +2449,6 @@ rbd_img_obj_parent_read_full_callback(st
/* All set, send it off. */
- orig_request->callback = rbd_img_obj_copyup_callback;
osdc = &rbd_dev->rbd_client->client->osdc;
img_result = rbd_obj_request_submit(osdc, orig_request);
if (!img_result)
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit e54198657b65625085834847ab6271087323ffea upstream.
This patch fixes a regression introduced with the following commit
in v4.0-rc1 code, where a iscsit_start_kthreads() failure triggers
a NULL pointer dereference OOPs:
commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca
Author: Nicholas Bellinger <[email protected]>
Date: Thu Feb 26 22:19:15 2015 -0800
iscsi-target: Convert iscsi_thread_set usage to kthread.h
To address this bug, move iscsit_start_kthreads() immediately
preceeding the transmit of last login response, before signaling
a successful transition into full-feature-phase within existing
iscsi_target_do_tx_login_io() logic.
This ensures that no target-side resource allocation failures can
occur after the final login response has been successfully sent.
Also, it adds a iscsi_conn->rx_login_comp to allow the RX thread
to sleep to prevent other socket related failures until the final
iscsi_post_login_handler() call is able to complete.
Cc: Sagi Grimberg <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 18 ++++++++++--
drivers/target/iscsi/iscsi_target_core.h | 1
drivers/target/iscsi/iscsi_target_login.c | 43 +++++++++++-------------------
drivers/target/iscsi/iscsi_target_login.h | 1
drivers/target/iscsi/iscsi_target_nego.c | 34 +++++++++++++++++++++++
5 files changed, 66 insertions(+), 31 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -3874,7 +3874,13 @@ get_immediate:
}
transport_err:
- iscsit_take_action_for_connection_exit(conn);
+ /*
+ * Avoid the normal connection failure code-path if this connection
+ * is still within LOGIN mode, and iscsi_np process context is
+ * responsible for cleaning up the early connection failure.
+ */
+ if (conn->conn_state != TARG_CONN_STATE_IN_LOGIN)
+ iscsit_take_action_for_connection_exit(conn);
out:
return 0;
}
@@ -3956,7 +3962,7 @@ reject:
int iscsi_target_rx_thread(void *arg)
{
- int ret;
+ int ret, rc;
u8 buffer[ISCSI_HDR_LEN], opcode;
u32 checksum = 0, digest = 0;
struct iscsi_conn *conn = arg;
@@ -3966,10 +3972,16 @@ int iscsi_target_rx_thread(void *arg)
* connection recovery / failure event can be triggered externally.
*/
allow_signal(SIGINT);
+ /*
+ * Wait for iscsi_post_login_handler() to complete before allowing
+ * incoming iscsi/tcp socket I/O, and/or failing the connection.
+ */
+ rc = wait_for_completion_interruptible(&conn->rx_login_comp);
+ if (rc < 0)
+ return 0;
if (conn->conn_transport->transport_type == ISCSI_INFINIBAND) {
struct completion comp;
- int rc;
init_completion(&comp);
rc = wait_for_completion_interruptible(&comp);
--- a/drivers/target/iscsi/iscsi_target_core.h
+++ b/drivers/target/iscsi/iscsi_target_core.h
@@ -589,6 +589,7 @@ struct iscsi_conn {
int bitmap_id;
int rx_thread_active;
struct task_struct *rx_thread;
+ struct completion rx_login_comp;
int tx_thread_active;
struct task_struct *tx_thread;
/* list_head for session connection list */
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -84,6 +84,7 @@ static struct iscsi_login *iscsi_login_i
init_completion(&conn->conn_logout_comp);
init_completion(&conn->rx_half_close_comp);
init_completion(&conn->tx_half_close_comp);
+ init_completion(&conn->rx_login_comp);
spin_lock_init(&conn->cmd_lock);
spin_lock_init(&conn->conn_usage_lock);
spin_lock_init(&conn->immed_queue_lock);
@@ -718,6 +719,7 @@ int iscsit_start_kthreads(struct iscsi_c
return 0;
out_tx:
+ send_sig(SIGINT, conn->tx_thread, 1);
kthread_stop(conn->tx_thread);
conn->tx_thread_active = false;
out_bitmap:
@@ -728,7 +730,7 @@ out_bitmap:
return ret;
}
-int iscsi_post_login_handler(
+void iscsi_post_login_handler(
struct iscsi_np *np,
struct iscsi_conn *conn,
u8 zero_tsih)
@@ -738,7 +740,6 @@ int iscsi_post_login_handler(
struct se_session *se_sess = sess->se_sess;
struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
- int rc;
iscsit_inc_conn_usage_count(conn);
@@ -779,10 +780,6 @@ int iscsi_post_login_handler(
sess->sess_ops->InitiatorName);
spin_unlock_bh(&sess->conn_lock);
- rc = iscsit_start_kthreads(conn);
- if (rc)
- return rc;
-
iscsi_post_login_start_timers(conn);
/*
* Determine CPU mask to ensure connection's RX and TX kthreads
@@ -791,15 +788,20 @@ int iscsi_post_login_handler(
iscsit_thread_get_cpumask(conn);
conn->conn_rx_reset_cpumask = 1;
conn->conn_tx_reset_cpumask = 1;
-
+ /*
+ * Wakeup the sleeping iscsi_target_rx_thread() now that
+ * iscsi_conn is in TARG_CONN_STATE_LOGGED_IN state.
+ */
+ complete(&conn->rx_login_comp);
iscsit_dec_conn_usage_count(conn);
+
if (stop_timer) {
spin_lock_bh(&se_tpg->session_lock);
iscsit_stop_time2retain_timer(sess);
spin_unlock_bh(&se_tpg->session_lock);
}
iscsit_dec_session_usage_count(sess);
- return 0;
+ return;
}
iscsi_set_session_parameters(sess->sess_ops, conn->param_list, 1);
@@ -840,10 +842,6 @@ int iscsi_post_login_handler(
" iSCSI Target Portal Group: %hu\n", tpg->nsessions, tpg->tpgt);
spin_unlock_bh(&se_tpg->session_lock);
- rc = iscsit_start_kthreads(conn);
- if (rc)
- return rc;
-
iscsi_post_login_start_timers(conn);
/*
* Determine CPU mask to ensure connection's RX and TX kthreads
@@ -852,10 +850,12 @@ int iscsi_post_login_handler(
iscsit_thread_get_cpumask(conn);
conn->conn_rx_reset_cpumask = 1;
conn->conn_tx_reset_cpumask = 1;
-
+ /*
+ * Wakeup the sleeping iscsi_target_rx_thread() now that
+ * iscsi_conn is in TARG_CONN_STATE_LOGGED_IN state.
+ */
+ complete(&conn->rx_login_comp);
iscsit_dec_conn_usage_count(conn);
-
- return 0;
}
static void iscsi_handle_login_thread_timeout(unsigned long data)
@@ -1331,20 +1331,9 @@ static int __iscsi_target_login_thread(s
if (iscsi_target_start_negotiation(login, conn) < 0)
goto new_sess_out;
- if (!conn->sess) {
- pr_err("struct iscsi_conn session pointer is NULL!\n");
- goto new_sess_out;
- }
-
iscsi_stop_login_thread_timer(np);
- if (signal_pending(current))
- goto new_sess_out;
-
- ret = iscsi_post_login_handler(np, conn, zero_tsih);
-
- if (ret < 0)
- goto new_sess_out;
+ iscsi_post_login_handler(np, conn, zero_tsih);
iscsit_deaccess_np(np, tpg);
tpg = NULL;
--- a/drivers/target/iscsi/iscsi_target_login.h
+++ b/drivers/target/iscsi/iscsi_target_login.h
@@ -12,6 +12,7 @@ extern int iscsit_accept_np(struct iscsi
extern int iscsit_get_login_rx(struct iscsi_conn *, struct iscsi_login *);
extern int iscsit_put_login_tx(struct iscsi_conn *, struct iscsi_login *, u32);
extern void iscsit_free_conn(struct iscsi_np *, struct iscsi_conn *);
+extern int iscsit_start_kthreads(struct iscsi_conn *);
extern int iscsi_target_login_thread(void *);
extern int iscsi_login_disable_FIM_keys(struct iscsi_param_list *, struct iscsi_conn *);
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -19,6 +19,7 @@
******************************************************************************/
#include <linux/ctype.h>
+#include <linux/kthread.h>
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
@@ -352,10 +353,24 @@ static int iscsi_target_do_tx_login_io(s
ntohl(login_rsp->statsn), login->rsp_length);
padding = ((-login->rsp_length) & 3);
+ /*
+ * Before sending the last login response containing the transition
+ * bit for full-feature-phase, go ahead and start up TX/RX threads
+ * now to avoid potential resource allocation failures after the
+ * final login response has been sent.
+ */
+ if (login->login_complete) {
+ int rc = iscsit_start_kthreads(conn);
+ if (rc) {
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_NO_RESOURCES);
+ return -1;
+ }
+ }
if (conn->conn_transport->iscsit_put_login_tx(conn, login,
login->rsp_length + padding) < 0)
- return -1;
+ goto err;
login->rsp_length = 0;
mutex_lock(&sess->cmdsn_mutex);
@@ -364,6 +379,23 @@ static int iscsi_target_do_tx_login_io(s
mutex_unlock(&sess->cmdsn_mutex);
return 0;
+
+err:
+ if (login->login_complete) {
+ if (conn->rx_thread && conn->rx_thread_active) {
+ send_sig(SIGINT, conn->rx_thread, 1);
+ kthread_stop(conn->rx_thread);
+ }
+ if (conn->tx_thread && conn->tx_thread_active) {
+ send_sig(SIGINT, conn->tx_thread, 1);
+ kthread_stop(conn->tx_thread);
+ }
+ spin_lock(&iscsit_global->ts_bitmap_lock);
+ bitmap_release_region(iscsit_global->ts_bitmap, conn->bitmap_id,
+ get_order(1));
+ spin_unlock(&iscsit_global->ts_bitmap_lock);
+ }
+ return -1;
}
static int iscsi_target_do_login_io(struct iscsi_conn *conn, struct iscsi_login *login)
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 44008f0896ae205b02b0882dbf807f0de149efc4 upstream.
Smatch complains that we have nested checks for "spdif_present". It
turns out the current behavior isn't correct, we should remove the first
check and keep the second.
Fixes: 1077a024812d ('ALSA: hda - Use generic parser for Cirrus codec driver')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_cirrus.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -787,9 +787,7 @@ static void cs4210_spdif_automute(struct
spec->spdif_present = spdif_present;
/* SPDIF TX on/off */
- if (spdif_present)
- snd_hda_set_pin_ctl(codec, spdif_pin,
- spdif_present ? PIN_OUT : 0);
+ snd_hda_set_pin_ctl(codec, spdif_pin, spdif_present ? PIN_OUT : 0);
cs_automute(codec);
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcus Gelderie <[email protected]>
commit de54b9ac253787c366bbfb28d901a31954eb3511 upstream.
A while back, the message queue implementation in the kernel was
improved to use btrees to speed up retrieval of messages, in commit
d6629859b36d ("ipc/mqueue: improve performance of send/recv").
That patch introducing the improved kernel handling of message queues
(using btrees) has, as a by-product, changed the meaning of the QSIZE
field in the pseudo-file created for the queue. Before, this field
reflected the size of the user-data in the queue. Since, it also takes
kernel data structures into account. For example, if 13 bytes of user
data are in the queue, on my machine the file reports a size of 61
bytes.
There was some discussion on this topic before (for example
https://lkml.org/lkml/2014/10/1/115). Commenting on a th lkml, Michael
Kerrisk gave the following background
(https://lkml.org/lkml/2015/6/16/74):
The pseudofiles in the mqueue filesystem (usually mounted at
/dev/mqueue) expose fields with metadata describing a message
queue. One of these fields, QSIZE, as originally implemented,
showed the total number of bytes of user data in all messages in
the message queue, and this feature was documented from the
beginning in the mq_overview(7) page. In 3.5, some other (useful)
work happened to break the user-space API in a couple of places,
including the value exposed via QSIZE, which now includes a measure
of kernel overhead bytes for the queue, a figure that renders QSIZE
useless for its original purpose, since there's no way to deduce
the number of overhead bytes consumed by the implementation.
(The other user-space breakage was subsequently fixed.)
This patch removes the accounting of kernel data structures in the
queue. Reporting the size of these data-structures in the QSIZE field
was a breaking change (see Michael's comment above). Without the QSIZE
field reporting the total size of user-data in the queue, there is no
way to deduce this number.
It should be noted that the resource limit RLIMIT_MSGQUEUE is counted
against the worst-case size of the queue (in both the old and the new
implementation). Therefore, the kernel overhead accounting in QSIZE is
not necessary to help the user understand the limitations RLIMIT imposes
on the processes.
Signed-off-by: Marcus Gelderie <[email protected]>
Acked-by: Doug Ledford <[email protected]>
Acked-by: Michael Kerrisk <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: David Howells <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: John Duffy <[email protected]>
Cc: Arto Bendiken <[email protected]>
Cc: Manfred Spraul <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/mqueue.c | 5 -----
1 file changed, 5 deletions(-)
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -143,7 +143,6 @@ static int msg_insert(struct msg_msg *ms
if (!leaf)
return -ENOMEM;
INIT_LIST_HEAD(&leaf->msg_list);
- info->qsize += sizeof(*leaf);
}
leaf->priority = msg->m_type;
rb_link_node(&leaf->rb_node, parent, p);
@@ -188,7 +187,6 @@ try_again:
"lazy leaf delete!\n");
rb_erase(&leaf->rb_node, &info->msg_tree);
if (info->node_cache) {
- info->qsize -= sizeof(*leaf);
kfree(leaf);
} else {
info->node_cache = leaf;
@@ -201,7 +199,6 @@ try_again:
if (list_empty(&leaf->msg_list)) {
rb_erase(&leaf->rb_node, &info->msg_tree);
if (info->node_cache) {
- info->qsize -= sizeof(*leaf);
kfree(leaf);
} else {
info->node_cache = leaf;
@@ -1026,7 +1023,6 @@ SYSCALL_DEFINE5(mq_timedsend, mqd_t, mqd
/* Save our speculative allocation into the cache */
INIT_LIST_HEAD(&new_leaf->msg_list);
info->node_cache = new_leaf;
- info->qsize += sizeof(*new_leaf);
new_leaf = NULL;
} else {
kfree(new_leaf);
@@ -1133,7 +1129,6 @@ SYSCALL_DEFINE5(mq_timedreceive, mqd_t,
/* Save our speculative allocation into the cache */
INIT_LIST_HEAD(&new_leaf->msg_list);
info->node_cache = new_leaf;
- info->qsize += sizeof(*new_leaf);
} else {
kfree(new_leaf);
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joseph Qi <[email protected]>
commit 209f7512d007980fd111a74a064d70a3656079cf upstream.
The "BUG_ON(list_empty(&osb->blocked_lock_list))" in
ocfs2_downconvert_thread_do_work can be triggered in the following case:
ocfs2dc has firstly saved osb->blocked_lock_count to local varibale
processed, and then processes the dentry lockres. During the dentry
put, it calls iput and then deletes rw, inode and open lockres from
blocked list in ocfs2_mark_lockres_freeing. And this causes the
variable `processed' to not reflect the number of blocked lockres to be
processed, which triggers the BUG.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dlmglue.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -3971,9 +3971,13 @@ static void ocfs2_downconvert_thread_do_
osb->dc_work_sequence = osb->dc_wake_sequence;
processed = osb->blocked_lock_count;
- while (processed) {
- BUG_ON(list_empty(&osb->blocked_lock_list));
-
+ /*
+ * blocked lock processing in this loop might call iput which can
+ * remove items off osb->blocked_lock_list. Downconvert up to
+ * 'processed' number of locks, but stop short if we had some
+ * removed in ocfs2_mark_lockres_freeing when downconverting.
+ */
+ while (processed && !list_empty(&osb->blocked_lock_list)) {
lockres = list_entry(osb->blocked_lock_list.next,
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 423f04d63cf421ea436bcc5be02543d549ce4b28 upstream.
raid1_end_read_request() assumes that the In_sync bits are consistent
with the ->degaded count.
raid1_spare_active updates the In_sync bit before the ->degraded count
and so exposes an inconsistency, as does error()
So extend the spinlock in raid1_spare_active() and error() to hide those
inconsistencies.
This should probably be part of
Commit: 34cab6f42003 ("md/raid1: fix test for 'was read error from
last working device'.")
as it addresses the same issue. It fixes the same bug and should go
to -stable for same reasons.
Fixes: 76073054c95b ("md/raid1: clean up read_balance.")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid1.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1382,6 +1382,7 @@ static void error(struct mddev *mddev, s
{
char b[BDEVNAME_SIZE];
struct r1conf *conf = mddev->private;
+ unsigned long flags;
/*
* If it is not operational, then we have already marked it as dead
@@ -1401,14 +1402,13 @@ static void error(struct mddev *mddev, s
return;
}
set_bit(Blocked, &rdev->flags);
+ spin_lock_irqsave(&conf->device_lock, flags);
if (test_and_clear_bit(In_sync, &rdev->flags)) {
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded++;
set_bit(Faulty, &rdev->flags);
- spin_unlock_irqrestore(&conf->device_lock, flags);
} else
set_bit(Faulty, &rdev->flags);
+ spin_unlock_irqrestore(&conf->device_lock, flags);
/*
* if recovery is running, make sure it aborts.
*/
@@ -1466,7 +1466,10 @@ static int raid1_spare_active(struct mdd
* Find all failed disks within the RAID1 configuration
* and mark them readable.
* Called under mddev lock, so rcu protection not needed.
+ * device_lock used to avoid races with raid1_end_read_request
+ * which expects 'In_sync' flags and ->degraded to be consistent.
*/
+ spin_lock_irqsave(&conf->device_lock, flags);
for (i = 0; i < conf->raid_disks; i++) {
struct md_rdev *rdev = conf->mirrors[i].rdev;
struct md_rdev *repl = conf->mirrors[conf->raid_disks + i].rdev;
@@ -1496,7 +1499,6 @@ static int raid1_spare_active(struct mdd
sysfs_notify_dirent_safe(rdev->sysfs_state);
}
}
- spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded -= count;
spin_unlock_irqrestore(&conf->device_lock, flags);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 451a2886b6bf90e2fb378f7c46c655450fb96e81 upstream.
unfortunately, allowing an arbitrary 16bit value means a possibility of
overflow in the calculation of total number of pages in bio_map_user_iov() -
we rely on there being no more than PAGE_SIZE members of sum in the
first loop there. If that sum wraps around, we end up allocating
too small array of pointers to pages and it's easy to overflow it in
the second loop.
X-Coverup: TINC (and there's no lumber cartel either)
Signed-off-by: Al Viro <[email protected]>
[bwh: s/MAX_UIOVEC/UIO_MAXIOV/. This was fixed upstream by commit
fdc81f45e9f5 ("sg_start_req(): use import_iovec()"), but we don't have
that function.]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1694,6 +1694,9 @@ static int sg_start_req(Sg_request *srp,
md->from_user = 0;
}
+ if (unlikely(iov_count > UIO_MAXIOV))
+ return -EINVAL;
+
if (iov_count) {
int len, size = sizeof(struct sg_iovec) * iov_count;
struct iovec *iov;
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 1b16c4bcf80e319b2226a886b72b8466179c8e3a upstream.
Fix yet another build failure caused by a weird set of configuration
settings:
LD init/built-in.o
arch/arm/kernel/built-in.o: In function `__dabt_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup'
arch/arm/kernel/built-in.o: In function `__irq_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup'
caused by:
CONFIG_KUSER_HELPERS=n
CONFIG_CPU_32v6K=n
CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n
Reported-by: Tomasz Figa <[email protected]>
Signed-off-by: Russell King <[email protected]>
Cc: Martin Kaiser <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/entry-armv.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -358,7 +358,8 @@ ENDPROC(__pabt_svc)
.endm
.macro kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
+ !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
#ifndef CONFIG_MMU
#warning "NPTL on non MMU needs fixing"
#else
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 2ba85e7af4c639d933c9a87a6d7363f2983d5ada upstream.
Aaro Koskinen reports the following oops:
Installing fiq handler from c001b110, length 0x164
Unable to handle kernel paging request at virtual address ffff1224
pgd = c0004000
[ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a
...
[<c0013154>] (set_fiq_handler+0x0/0x6c) from [<c0365d38>] (ams_delta_init_fiq+0xa8/0x160)
r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c
[<c0365c90>] (ams_delta_init_fiq+0x0/0x160) from [<c0365b14>] (ams_delta_init+0xd4/0x114)
r6:00000000 r5:fffece10 r4:c037a9e0
[<c0365a40>] (ams_delta_init+0x0/0x114) from [<c03613b4>] (customize_machine+0x24/0x30)
This is because the vectors page is now write-protected, and to change
code in there we must write to its original alias. Make that change,
and adjust the cache flushing such that the code will become visible
to the instruction stream on VIVT CPUs.
Reported-by: Aaro Koskinen <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Signed-off-by: Russell King <[email protected]>
Cc: Martin Kaiser <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/fiq.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -84,17 +84,13 @@ int show_fiq_list(struct seq_file *p, in
void set_fiq_handler(void *start, unsigned int length)
{
-#if defined(CONFIG_CPU_USE_DOMAINS)
- void *base = (void *)0xffff0000;
-#else
void *base = vectors_page;
-#endif
unsigned offset = FIQ_OFFSET;
memcpy(base + offset, start, length);
+ if (!cache_is_vipt_nonaliasing())
+ flush_icache_range(base + offset, offset + length);
flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
- if (!vectors_high())
- flush_icache_range(offset, offset + length);
}
int claim_fiq(struct fiq_handler *f)
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
commit 7cb3be0a27805c625ff7cce20c53c926d9483243 upstream.
Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:
arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]
Cast it as '(unsigned long)base' to avoid the warning.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Russell King <[email protected]>
Cc: Martin Kaiser <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/fiq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -89,7 +89,8 @@ void set_fiq_handler(void *start, unsign
memcpy(base + offset, start, length);
if (!cache_is_vipt_nonaliasing())
- flush_icache_range(base + offset, offset + length);
+ flush_icache_range((unsigned long)base + offset, offset +
+ length);
flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
}
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 3ead7c52bdb0ab44f4bb1feed505a8323cc12ba7 upstream.
This function may copy the si_addr_lsb field to user mode when it hasn't
been initialized, which can leak kernel stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/signalfd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -121,8 +121,9 @@ static int signalfd_copyinfo(struct sign
* Other callers might not initialize the si_lsb field,
* so check explicitly for the right codes here.
*/
- if (kinfo->si_code == BUS_MCEERR_AR ||
- kinfo->si_code == BUS_MCEERR_AO)
+ if (kinfo->si_signo == SIGBUS &&
+ (kinfo->si_code == BUS_MCEERR_AR ||
+ kinfo->si_code == BUS_MCEERR_AO))
err |= __put_user((short) kinfo->si_addr_lsb,
&uinfo->ssi_addr_lsb);
#endif
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 26135022f85105ad725cda103fa069e29e83bd16 upstream.
This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal32.c | 3 ++-
kernel/signal.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -193,7 +193,8 @@ int copy_siginfo_to_user32(compat_siginf
* Other callers might not initialize the si_lsb field,
* so check explicitely for the right codes here.
*/
- if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2768,7 +2768,8 @@ int copy_siginfo_to_user(siginfo_t __use
* Other callers might not initialize the si_lsb field,
* so check explicitly for the right codes here.
*/
- if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amanieu d'Antras <[email protected]>
commit 3c00cb5e68dc719f2fc73a33b1b230aadfcb1309 upstream.
This function can leak kernel stack data when the user siginfo_t has a
positive si_code value. The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.
copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.
This fixes the following information leaks:
x86: 8 bytes leaked when sending a signal from a 32-bit process to
itself. This leak grows to 16 bytes if the process uses x32.
(si_code = __SI_CHLD)
x86: 100 bytes leaked when sending a signal from a 32-bit process to
a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
64-bit process. (si_code = any)
parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process. These bugs are also fixed for consistency.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal32.c | 2 --
arch/mips/kernel/signal32.c | 2 --
arch/powerpc/kernel/signal_32.c | 2 --
kernel/signal.c | 4 ++--
4 files changed, 2 insertions(+), 8 deletions(-)
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -221,8 +221,6 @@ int copy_siginfo_to_user32(compat_siginf
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE))
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -368,8 +368,6 @@ int copy_siginfo_to_user32(compat_siginf
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, 3*sizeof(int)) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE32))
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -949,8 +949,6 @@ int copy_siginfo_to_user32(struct compat
int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
{
- memset(to, 0, sizeof *to);
-
if (copy_from_user(to, from, 3*sizeof(int)) ||
copy_from_user(to->_sifields._pad,
from->_sifields._pad, SI_PAD_SIZE32))
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -3036,7 +3036,7 @@ COMPAT_SYSCALL_DEFINE3(rt_sigqueueinfo,
int, sig,
struct compat_siginfo __user *, uinfo)
{
- siginfo_t info;
+ siginfo_t info = {};
int ret = copy_siginfo_from_user32(&info, uinfo);
if (unlikely(ret))
return ret;
@@ -3082,7 +3082,7 @@ COMPAT_SYSCALL_DEFINE4(rt_tgsigqueueinfo
int, sig,
struct compat_siginfo __user *, uinfo)
{
- siginfo_t info;
+ siginfo_t info = {};
if (copy_siginfo_from_user32(&info, uinfo))
return -EFAULT;
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <[email protected]>
commit ce40cd3fc7fa40a6119e5fe6c0f2bc0eb4541009 upstream.
Malicious (or egregiously buggy) userspace can trigger it, but it
should never happen in normal operation.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Wang Kai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -165,7 +165,7 @@ static inline u16 apic_logical_id(struct
static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu)
{
- return vcpu->arch.apic->pending_events;
+ return kvm_vcpu_has_lapic(vcpu) && vcpu->arch.apic->pending_events;
}
bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit b97e92574c0bf335db1cd2ec491d8ff5cd5d0b49 upstream
Use separate bitmaps for each nodes in the cluster
bitmap_read_sb() validates the bitmap superblock that it reads in.
If it finds an inconsistency like a bad magic number or out-of-range
version number, it prints an error and returns, but it incorrectly
returns zero, so the array is still assembled with the (invalid) bitmap.
This means it could try to use a bitmap with a new version number which
it therefore does not understand.
This bug was introduced in 3.5 and fix as part of a larger patch in 4.1.
So the patch is suitable for any -stable kernel in that range.
Fixes: 27581e5ae01f ("md/bitmap: centralise allocation of bitmap file pages.")
Signed-off-by: NeilBrown <[email protected]>
Reported-by: GuoQing Jiang <[email protected]>
---
drivers/md/bitmap.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -564,6 +564,8 @@ static int bitmap_read_sb(struct bitmap
if (err)
return err;
+ err = -EINVAL;
+
sb = kmap_atomic(sb_page);
chunksize = le32_to_cpu(sb->chunksize);
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit ecf5fc6e9654cd7a268c782a523f072b2f1959f9 upstream.
Nikolay has reported a hang when a memcg reclaim got stuck with the
following backtrace:
PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync"
#0 __schedule at ffffffff815ab152
#1 schedule at ffffffff815ab76e
#2 schedule_timeout at ffffffff815ae5e5
#3 io_schedule_timeout at ffffffff815aad6a
#4 bit_wait_io at ffffffff815abfc6
#5 __wait_on_bit at ffffffff815abda5
#6 wait_on_page_bit at ffffffff8111fd4f
#7 shrink_page_list at ffffffff81135445
#8 shrink_inactive_list at ffffffff81135845
#9 shrink_lruvec at ffffffff81135ead
#10 shrink_zone at ffffffff811360c3
#11 shrink_zones at ffffffff81136eff
#12 do_try_to_free_pages at ffffffff8113712f
#13 try_to_free_mem_cgroup_pages at ffffffff811372be
#14 try_charge at ffffffff81189423
#15 mem_cgroup_try_charge at ffffffff8118c6f5
#16 __add_to_page_cache_locked at ffffffff8112137d
#17 add_to_page_cache_lru at ffffffff81121618
#18 pagecache_get_page at ffffffff8112170b
#19 grow_dev_page at ffffffff811c8297
#20 __getblk_slow at ffffffff811c91d6
#21 __getblk_gfp at ffffffff811c92c1
#22 ext4_ext_grow_indepth at ffffffff8124565c
#23 ext4_ext_create_new_leaf at ffffffff81246ca8
#24 ext4_ext_insert_extent at ffffffff81246f09
#25 ext4_ext_map_blocks at ffffffff8124a848
#26 ext4_map_blocks at ffffffff8121a5b7
#27 mpage_map_one_extent at ffffffff8121b1fa
#28 mpage_map_and_submit_extent at ffffffff8121f07b
#29 ext4_writepages at ffffffff8121f6d5
#30 do_writepages at ffffffff8112c490
#31 __filemap_fdatawrite_range at ffffffff81120199
#32 filemap_flush at ffffffff8112041c
#33 ext4_alloc_da_blocks at ffffffff81219da1
#34 ext4_rename at ffffffff81229b91
#35 ext4_rename2 at ffffffff81229e32
#36 vfs_rename at ffffffff811a08a5
#37 SYSC_renameat2 at ffffffff811a3ffc
#38 sys_renameat2 at ffffffff811a408e
#39 sys_rename at ffffffff8119e51e
#40 system_call_fastpath at ffffffff815afa89
Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.
The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified. The code has been changed by c3b94f44fcb0 ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code. But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.
ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio. Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.
Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback. The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.
As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem. Moreover he notes:
: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.
[[email protected]: corrected the control flow]
Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages")
Reported-by: Nikolay Borisov <[email protected]>
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmscan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -743,7 +743,7 @@ static unsigned long shrink_page_list(st
* testing may_enter_fs here is liable to OOM on them.
*/
if (global_reclaim(sc) ||
- !PageReclaim(page) || !(sc->gfp_mask & __GFP_IO)) {
+ !PageReclaim(page) || !may_enter_fs) {
/*
* This is slightly racy - end_page_writeback()
* might have just cleared PageReclaim, then
On 08/14/2015 11:44 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.87 release.
> There are 35 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Aug 16 17:43:46 UTC 2015.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.87-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
[email protected] | (970) 217-8978
On Fri, Aug 14, 2015 at 10:44:38AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.87 release.
> There are 35 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Aug 16 17:43:46 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
total: 122 pass: 122 fail: 0
Qemu test results:
total: 67 pass: 67 fail: 0
Details are available at http://server.roeck-us.net:8010/builders.
Guenter