On Mon, Oct 26, 2015 at 10:24:17PM +0200, Constantine Shulyupin wrote:
> From: Constantine Shulyupin <[email protected]>
>
> Introduced subnodes sensor, fan and peci with properties.
>
> Signed-off-by: Constantine Shulyupin <[email protected]>
> ---
> Changed in v8:
> - added senor type "local"
> - Compatible nodes converted to senor types "vcore", "vcc"
>
> Changed in v7:
> - sensors type (thermistor, thermistor, voltage) and pwm type
> selected with type property instead of compatible property.
>
> Changed in v6:
> - Removed previous definition.
> - Introduced subnodes sensor, fan and peci with properties.
>
> Changed in v5:
> - Fixed typos
>
> Changed in v4:
> - Removed registers initialization by names
> - Added properties nuvoton,sensor*-type
>
> Changed in v3:
> - Fixed vendor prefix
> - Added short registers description,
> full registers description is available at
> https://www.nuvoton.com/hq/products/cloud-computing/hardware-monitors/desktop-server-series/nct7802y/
>
> Changed in v2:
> - Removed nct7802,reg-init
> - Added registers initialization by names
>
> Introduced in v1:
> - nct7802,reg-init
> ---
> .../devicetree/bindings/hwmon/nct7802.txt | 102 +++++++++++++++++++++
> 1 file changed, 102 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/nct7802.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/nct7802.txt b/Documentation/devicetree/bindings/hwmon/nct7802.txt
> new file mode 100644
> index 0000000..8647783
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/nct7802.txt
> @@ -0,0 +1,102 @@
> +Nuvoton NCT7802Y Hardware Monitoring IC
> +
> +Required node properties:
> +
> + - "compatible": must be "nuvoton,nct7802"
> + - "reg": I2C bus address of the device
> + - #address-cells=<1>;
> + - #size-cells=<0>;
> +
> +Optional subnodes:
> +
> +Sensor subnodes properties:
> + - "compatible", allowed values:
> + - "nuvoton,nct7802"
This should have -sensor appended?
> + - "sensor-type", allowed values:
> + "thermal-diode"
> + "thermistor"
> + "voltage"
> + "local"
> + "vcore"
> + "vcc"
These are different connections to the same h/w block in the chip? If
so, then this is fine. If the h/w blocks are different, then it would be
better to go back to different compatible strings.
> +For sensors of types "thermal-diode", "thermistor" and "voltage" required
> + - "reg": index in range 0 .. 2
> +
> +Except sensor at address 2 can't be "thermal-diode".
> +
> +Fan subnode:
> +
> +Required properties:
> + - "reg" :index of in range 0 .. 2.
What does the numbering correspond to in the h/w?
> + - "compatible", should be "nuvoton,nct7802-fan"
> +Optional boolean properties:
> + - "direct-current" :direct current powered fan instead default PWM
> + - "invert" :inverted polarity
> + - "open-drain" :open-drain output instead push pull
> +
> +Subnode "peci" properties:
> + - "reg" :index in range 0 .. 1
> + - "compatible", should be "nuvoton,nct7802-peci"
> +
> +Not defined sensors, fans and PECI modules will be disabled.
> +
> +Example nct7802 node:
> +
> +nct7802-example@28 {
> + compatible = "nuvoton,nct7802";
> + reg = <0x28>;
> + #address-cells=<1>;
> + #size-cells=<0>;
> + local-sensor {
> + compatible = "nuvoton,nct7802-sensor";
> + sensor-type = "local";
> + };
> + sensor@0 {
> + compatible = "nuvoton,nct7802-sensor";
> + reg = <0>;
> + sensor-type = "thermal-diode";
> + };
> + sensor@1 {
> + compatible = "nuvoton,nct7802-sensor";
> + reg = <1>;
> + sensor-type = "thermistor";
> + };
> + sensor@2 {
> + compatible = "nuvoton,nct7802-sensor";
> + reg = <2>;
> + sensor-type = "voltage";
> + };
> + vcc {
> + compatible = "nuvoton,nct7802-sensor";
> + sensor-type = "vcc";
No unit address?
> + };
> + vcore {
> + compatible = "nuvoton,nct7802-sensor";
> + sensor-type = "vcore";
> + };
> + pwm-fan@0 {
> + compatible = "nuvoton,nct7802-fan";
> + reg = <0>;
> + };
> + dc-fan@1 {
> + compatible = "nuvoton,nct7802-fan";
> + reg = <1>;
> + direct-current;
> + open-drain;
> + invert;
> + };
> + fan@2 {
> + compatible = "nuvoton,nct7802-fan";
> + reg = <2>;
> + open-drain;
> + invert;
> + };
> + peci@0 {
> + compatible = "nuvoton,nct7802-peci";
> + reg = <0>;
> + };
> + peci@1 {
> + compatible = "nuvoton,nct7802-peci";
> + reg = <1>;
> + };
> +};
> --
> 1.9.1
>
On Thu, Nov 12, 2015 at 7:26 PM, Rob Herring <[email protected]> wrote:
> On Mon, Oct 26, 2015 at 10:24:17PM +0200, Constantine Shulyupin wrote:
>> From: Constantine Shulyupin <[email protected]>
>> +Optional subnodes:
>> +
>> +Sensor subnodes properties:
>> + - "compatible", allowed values:
>> + - "nuvoton,nct7802"
>
> This should have -sensor appended?
Right.
>> + - "sensor-type", allowed values:
>> + "thermal-diode"
>> + "thermistor"
>> + "voltage"
>> + "local"
>> + "vcore"
>> + "vcc"
>
> These are different connections to the same h/w block in the chip? If
> so, then this is fine. If the h/w blocks are different, then it would be
> better to go back to different compatible strings.
"thermal-diode", "thermistor", "voltage", "local" - is one H/W block
(7.2.32 Mode Selection Register, 22h)
One of above "local" - is single input, enables by one bit EnLTD
"vcore", "vcc" - another H/W block (7.2.35 Voltage Monitor Enable
Register, 25h), each of them is different input.
I'll divide them in the next patch.
>
>> +For sensors of types "thermal-diode", "thermistor" and "voltage" required
>> + - "reg": index in range 0 .. 2
>> +
>> +Except sensor at address 2 can't be "thermal-diode".
>> +
>> +Fan subnode:
>> +
>> +Required properties:
>> + - "reg" :index of in range 0 .. 2.
>
> What does the numbering correspond to in the h/w?
The numberring corresponds to the three different temperature/voltage
inputs (RTD1_MD, RTD2_MD, RTD3_MD) and three different fans (EnFan1,
EnFan2, EnFan3, EnDCFAN*, etc)
>> + vcc {
>> + compatible = "nuvoton,nct7802-sensor";
>> + sensor-type = "vcc";
>
> No unit address?
>
>> + };
>> + vcore {
>> + compatible = "nuvoton,nct7802-sensor";
>> + sensor-type = "vcore";
>> + };
There is only one vcc anv vcore input.
--
Thanks
Constantine