[Apologies for fat-fingering subject in the other attempt]
This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC
address in Open Firmware or IDPROM").
As with that fix, attempt to look up the MAC address in Open Firmware
on systems that support it, and use IDPROM on SPARC if no OF address
is found.
In the case of the i40e there is an assumption that the default mac
address has already been set up as the primary mac filter on probe,
so if this filter is obtained from the Open Firmware or IDPROM, an
explicit write is needed via i40e_aq_mac_address_write() and
i40e_aq_add_macvlan() invocation.
The is_default_mac field in the platform-private i40e_pf structure
tracks whether the mac address was default or not, and in the latter
case, will trigger the calls to i40e_aq_mac_address_write() and
i40e_aq_add_macvlan().
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sowmini Varadhan <[email protected]>
---
v2, v3: Andy Shevchenko comments
v4: Shannon Nelson review: explicitly set up mac filters before register_netdev
v5: Shannon Nelson code style comments
v6: Shannon Nelson code style comments
v7: Ensure that i40e_macaddr_init() is called only for VSI_MAIN, and only
if the mac address is not the default. Some additional code-refactoring
based on comments from Shannon Nelson
drivers/net/ethernet/intel/i40e/i40e.h | 2 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 87 +++++++++++++++++++++++++++
2 files changed, 89 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 0b9537b..6d41757 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -420,6 +420,8 @@ struct i40e_pf {
u32 ioremap_len;
u32 fd_inv;
+
+ u32 is_default_mac:1;
};
struct i40e_mac_filter {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9e6268b..40a5d53 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -24,6 +24,15 @@
*
******************************************************************************/
+#include <linux/etherdevice.h>
+#include <linux/of_net.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#include <asm/prom.h>
+#endif
+
/* Local includes */
#include "i40e.h"
#include "i40e_diag.h"
@@ -9387,6 +9396,44 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
}
/**
+ * i40e_macaddr_init - explicitly write the mac address filters.
+ *
+ * @vsi: pointer to the vsi.
+ * @macaddr: the MAC address
+ *
+ * This is needed when the macaddr has been obtained by other
+ * means than the default, e.g., from Open Firmware or IDPROM.
+ * Returns 0 on success, negative on failure
+ **/
+static int i40e_macaddr_init(struct i40e_vsi *vsi, u8 *macaddr)
+{
+ int ret, aq_err;
+ struct i40e_aqc_add_macvlan_element_data element;
+
+ ret = i40e_aq_mac_address_write(&vsi->back->hw,
+ I40E_AQC_WRITE_TYPE_LAA_WOL,
+ macaddr, NULL);
+ if (ret) {
+ dev_info(&vsi->back->pdev->dev,
+ "Addr change for VSI failed: %d\n", ret);
+ return -EADDRNOTAVAIL;
+ }
+
+ memset(&element, 0, sizeof(element));
+ ether_addr_copy(element.mac_addr, macaddr);
+ element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
+ ret = i40e_aq_add_macvlan(&vsi->back->hw, vsi->seid, &element, 1, NULL);
+ aq_err = vsi->back->hw.aq.asq_last_status;
+ if (aq_err != I40E_AQ_RC_OK) {
+ dev_info(&vsi->back->pdev->dev,
+ "add filter failed err %s aq_err %s\n",
+ i40e_stat_str(&vsi->back->hw, ret),
+ i40e_aq_str(&vsi->back->hw, aq_err));
+ }
+ return ret;
+}
+
+/**
* i40e_vsi_setup - Set up a VSI by a given type
* @pf: board private structure
* @type: VSI type
@@ -9510,6 +9557,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
switch (vsi->type) {
/* setup the netdev if needed */
case I40E_VSI_MAIN:
+ /* Apply relevant filters if a platform-specific mac
+ * address was selected.
+ */
+ if (!pf->is_default_mac) {
+ ret = i40e_macaddr_init(vsi, pf->hw.mac.addr);
+ if (ret)
+ goto err_netdev;
+ }
case I40E_VSI_VMDQ2:
case I40E_VSI_FCOE:
ret = i40e_config_netdev(vsi);
@@ -10340,6 +10395,36 @@ static void i40e_print_features(struct i40e_pf *pf)
}
/**
+ * i40e_get_platform_mac_addr - get platform-specific MAC address
+ *
+ * @pdev: PCI device information struct
+ * @pf: board private structure
+ *
+ * Look up the MAC address in Open Firmware on systems that support it,
+ * and use IDPROM on SPARC if no OF address is found. On return, the value
+ * of pf->is_default_mac will be set to 1, if the default mac address is
+ * to be used, or 0, if a platform-specific value has been selected.
+ *
+ **/
+static void i40e_get_platform_mac_addr(struct pci_dev *pdev, struct i40e_pf *pf)
+{
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+ const unsigned char *addr;
+ u8 *mac_addr = pf->hw.mac.addr;
+
+ pf->is_default_mac = 1;
+ addr = of_get_mac_address(dp);
+ if (addr) {
+ ether_addr_copy(mac_addr, addr);
+ pf->is_default_mac = 0;
+ }
+#ifdef CONFIG_SPARC
+ ether_addr_copy(mac_addr, idprom->id_ethaddr);
+ pf->is_default_mac = 0;
+#endif /* CONFIG_SPARC */
+}
+
+/**
* i40e_probe - Device initialization routine
* @pdev: PCI device information struct
* @ent: entry in i40e_pci_tbl
@@ -10543,6 +10628,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
i40e_get_mac_addr(hw, hw->mac.addr);
+ /* allow a platform config to override the HW addr */
+ i40e_get_platform_mac_addr(pdev, pf);
if (!is_valid_ether_addr(hw->mac.addr)) {
dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
err = -EIO;
--
1.7.1
On Fri, Dec 4, 2015 at 8:24 AM, Sowmini Varadhan
<[email protected]> wrote:
>
> [Apologies for fat-fingering subject in the other attempt]
>
> This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC
> address in Open Firmware or IDPROM").
>
> As with that fix, attempt to look up the MAC address in Open Firmware
> on systems that support it, and use IDPROM on SPARC if no OF address
> is found.
>
> In the case of the i40e there is an assumption that the default mac
> address has already been set up as the primary mac filter on probe,
> so if this filter is obtained from the Open Firmware or IDPROM, an
> explicit write is needed via i40e_aq_mac_address_write() and
> i40e_aq_add_macvlan() invocation.
>
> The is_default_mac field in the platform-private i40e_pf structure
> tracks whether the mac address was default or not, and in the latter
> case, will trigger the calls to i40e_aq_mac_address_write() and
> i40e_aq_add_macvlan().
>
> Reviewed-by: Martin K. Petersen <[email protected]>
> Signed-off-by: Sowmini Varadhan <[email protected]>
> ---
> v2, v3: Andy Shevchenko comments
> v4: Shannon Nelson review: explicitly set up mac filters before register_netdev
> v5: Shannon Nelson code style comments
> v6: Shannon Nelson code style comments
> v7: Ensure that i40e_macaddr_init() is called only for VSI_MAIN, and only
> if the mac address is not the default. Some additional code-refactoring
> based on comments from Shannon Nelson
>
> drivers/net/ethernet/intel/i40e/i40e.h | 2 +
> drivers/net/ethernet/intel/i40e/i40e_main.c | 87 +++++++++++++++++++++++++++
> 2 files changed, 89 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
> index 0b9537b..6d41757 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e.h
> +++ b/drivers/net/ethernet/intel/i40e/i40e.h
> @@ -420,6 +420,8 @@ struct i40e_pf {
>
> u32 ioremap_len;
> u32 fd_inv;
> +
> + u32 is_default_mac:1;
This driver doesn't use bitfield flags. Please look at how we use
pf->flags and create a new I40E_FLAG_ definition. Because I know
what's coming soon from our internal changes, I'd suggest using bit
50.
> };
>
> struct i40e_mac_filter {
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 9e6268b..40a5d53 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -24,6 +24,15 @@
> *
> ******************************************************************************/
>
> +#include <linux/etherdevice.h>
> +#include <linux/of_net.h>
> +#include <linux/pci.h>
> +
> +#ifdef CONFIG_SPARC
> +#include <asm/idprom.h>
> +#include <asm/prom.h>
> +#endif
> +
> /* Local includes */
> #include "i40e.h"
> #include "i40e_diag.h"
> @@ -9387,6 +9396,44 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> }
>
> /**
> + * i40e_macaddr_init - explicitly write the mac address filters.
> + *
> + * @vsi: pointer to the vsi.
> + * @macaddr: the MAC address
> + *
> + * This is needed when the macaddr has been obtained by other
> + * means than the default, e.g., from Open Firmware or IDPROM.
> + * Returns 0 on success, negative on failure
> + **/
> +static int i40e_macaddr_init(struct i40e_vsi *vsi, u8 *macaddr)
> +{
> + int ret, aq_err;
> + struct i40e_aqc_add_macvlan_element_data element;
> +
> + ret = i40e_aq_mac_address_write(&vsi->back->hw,
> + I40E_AQC_WRITE_TYPE_LAA_WOL,
> + macaddr, NULL);
> + if (ret) {
> + dev_info(&vsi->back->pdev->dev,
> + "Addr change for VSI failed: %d\n", ret);
> + return -EADDRNOTAVAIL;
> + }
> +
> + memset(&element, 0, sizeof(element));
> + ether_addr_copy(element.mac_addr, macaddr);
> + element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
> + ret = i40e_aq_add_macvlan(&vsi->back->hw, vsi->seid, &element, 1, NULL);
> + aq_err = vsi->back->hw.aq.asq_last_status;
> + if (aq_err != I40E_AQ_RC_OK) {
> + dev_info(&vsi->back->pdev->dev,
> + "add filter failed err %s aq_err %s\n",
> + i40e_stat_str(&vsi->back->hw, ret),
> + i40e_aq_str(&vsi->back->hw, aq_err));
I'd write this just a little differently to match the rest of the driver:
ret = i40e_aq_add_macvlan(&vsi->back->hw, vsi->seid, &element, 1, NULL);
if (!ret) {
dev_info(&vsi->back->pdev->dev,
"add filter failed err %s aq_err %s\n",
i40e_stat_str(&vsi->back->hw, ret),
i40e_aq_str(&vsi->back->hw,
vsi->back->hw.aq.asq_last_status));
> + }
> + return ret;
> +}
> +
> +/**
> * i40e_vsi_setup - Set up a VSI by a given type
> * @pf: board private structure
> * @type: VSI type
> @@ -9510,6 +9557,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
> switch (vsi->type) {
> /* setup the netdev if needed */
> case I40E_VSI_MAIN:
> + /* Apply relevant filters if a platform-specific mac
> + * address was selected.
> + */
> + if (!pf->is_default_mac) {
> + ret = i40e_macaddr_init(vsi, pf->hw.mac.addr);
> + if (ret)
> + goto err_netdev;
> + }
Is this error really worth killing the driver load? I think I'd
rather allow it to continue with its hardware defaults.
> case I40E_VSI_VMDQ2:
> case I40E_VSI_FCOE:
> ret = i40e_config_netdev(vsi);
> @@ -10340,6 +10395,36 @@ static void i40e_print_features(struct i40e_pf *pf)
> }
>
> /**
> + * i40e_get_platform_mac_addr - get platform-specific MAC address
> + *
> + * @pdev: PCI device information struct
> + * @pf: board private structure
> + *
> + * Look up the MAC address in Open Firmware on systems that support it,
> + * and use IDPROM on SPARC if no OF address is found. On return, the value
> + * of pf->is_default_mac will be set to 1, if the default mac address is
> + * to be used, or 0, if a platform-specific value has been selected.
> + *
> + **/
> +static void i40e_get_platform_mac_addr(struct pci_dev *pdev, struct i40e_pf *pf)
> +{
> + struct device_node *dp = pci_device_to_OF_node(pdev);
This gives me a compile warning, probably because I don't have
CONFIG_OF enabled.
> + const unsigned char *addr;
> + u8 *mac_addr = pf->hw.mac.addr;
> +
> + pf->is_default_mac = 1;
> + addr = of_get_mac_address(dp);
> + if (addr) {
> + ether_addr_copy(mac_addr, addr);
> + pf->is_default_mac = 0;
> + }
> +#ifdef CONFIG_SPARC
> + ether_addr_copy(mac_addr, idprom->id_ethaddr);
> + pf->is_default_mac = 0;
> +#endif /* CONFIG_SPARC */
> +}
> +
> +/**
> * i40e_probe - Device initialization routine
> * @pdev: PCI device information struct
> * @ent: entry in i40e_pci_tbl
> @@ -10543,6 +10628,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> }
>
> i40e_get_mac_addr(hw, hw->mac.addr);
> + /* allow a platform config to override the HW addr */
> + i40e_get_platform_mac_addr(pdev, pf);
> if (!is_valid_ether_addr(hw->mac.addr)) {
> dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
> err = -EIO;
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html