This patch set is a resend of the regulator portion of the patches
found at:
https://lkml.org/lkml/2015/9/24/561
This adds support for the PMA8084 regulators found on APQ8084 platforms
and the PM8916 regulators found on MSM8916 platforms. There are no changes from
the version referenced above, this is just a resend.
Andy Gross (2):
regulator: qcom-smd: Add PM8916 support
regulator: qcom-smd: Add support for PMA8084
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 53 +++++++
drivers/regulator/qcom_smd-regulator.c | 159 +++++++++++++++++++++
2 files changed, 212 insertions(+)
--
1.9.1
From: Andy Gross <[email protected]>
This patch adds support and documentation for the PM8916 regulators
found on MSM8916 platforms.
Acked-by: Bjorn Andersson <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++
drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
index 7084474..e74ffe1 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
@@ -17,6 +17,7 @@ Regulator nodes are identified by their compatible:
Value type: <string>
Definition: must be one of:
"qcom,rpm-pm8841-regulators"
+ "qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
- vdd_s1-supply:
@@ -35,6 +36,19 @@ Regulator nodes are identified by their compatible:
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_l1_l2_l3-supply:
+- vdd_l4_l5_l6-supply:
+- vdd_l7-supply:
+- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
+ Usage: optional (pm8916 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
- vdd_l1_l3-supply:
- vdd_l2_lvs1_2_3-supply:
- vdd_l4_l11-supply:
@@ -57,6 +71,10 @@ of the pmics below.
pm8841:
s1, s2, s3, s4, s5, s6, s7, s8
+pm8916:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18
+
pm8941:
s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 6fa0c7d..8464ead 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -211,6 +211,43 @@ static const struct regulator_desc pm8941_switch = {
.ops = &rpm_switch_ops,
};
+static const struct regulator_desc pm8916_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 209,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_nldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 94,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_lvo_smps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
+ REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 128,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_hvo_smps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 32,
+ .ops = &rpm_smps_ldo_ops,
+};
+
struct rpm_regulator_data {
const char *name;
u32 type;
@@ -231,6 +268,32 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" },
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ {}
+};
+
static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
@@ -274,6 +337,7 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
+ { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
{}
};
--
1.9.1
From: Andy Gross <[email protected]>
This patch adds support and documentation for the PMA8084 regulators
found on APQ8084 platforms.
Signed-off-by: Andy Gross <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 35 ++++++++
drivers/regulator/qcom_smd-regulator.c | 95 ++++++++++++++++++++++
2 files changed, 130 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
index e74ffe1..22b3506 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
@@ -19,6 +19,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8841-regulators"
"qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
+ "qcom,rpm-pma8084-regulators"
- vdd_s1-supply:
- vdd_s2-supply:
@@ -64,6 +65,35 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
+- vdd_l1_l11-supply:
+- vdd_l2_l3_l4_l27-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15_l26-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l13_l20_l23_l24-supply:
+- vdd_l16_l25-supply:
+- vdd_l17-supply:
+- vdd_l18-supply:
+- vdd_l19-supply:
+- vdd_l21-supply:
+- vdd_l22-supply:
+ Usage: optional (pma8084 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -80,6 +110,11 @@ pm8941:
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
lvs3, 5vs1, 5vs2
+pma8084:
+ s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+ l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+ l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt.
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 8464ead..56a17ec 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -153,6 +153,49 @@ static const struct regulator_ops rpm_switch_ops = {
.is_enabled = rpm_reg_is_enabled,
};
+static const struct regulator_desc pma8084_hfsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
+ REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 159,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pma8084_ftsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000),
+ REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 340,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pma8084_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 100,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pma8084_nldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 64,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pma8084_switch = {
+ .ops = &rpm_switch_ops,
+};
+
static const struct regulator_desc pm8x41_hfsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500),
@@ -335,10 +378,62 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
+ { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" },
+ { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" },
+ { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" },
+ { "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" },
+ { "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" },
+ { "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" },
+ { "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" },
+ { "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" },
+
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" },
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" },
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" },
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" },
+ { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" },
+ { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" },
+ { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" },
+ { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+ { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" },
+ { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+ { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+
+ { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch },
+ { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch },
+ { "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch },
+ { "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch },
+ { "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch },
+
+ {}
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+ { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
{}
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--
1.9.1
On Fri, Dec 11, 2015 at 12:01:32AM -0600, Andy Gross wrote:
> This patch set is a resend of the regulator portion of the patches
> found at:
>
> https://lkml.org/lkml/2015/9/24/561
These don't apply against current code which suggests that the
unanswered question I asked about dependencies when they were originally
posted is still outstanding...
On Sat, Dec 12, 2015 at 11:00:25PM +0000, Mark Brown wrote:
> On Fri, Dec 11, 2015 at 12:01:32AM -0600, Andy Gross wrote:
> > This patch set is a resend of the regulator portion of the patches
> > found at:
> >
> > https://lkml.org/lkml/2015/9/24/561
>
> These don't apply against current code which suggests that the
> unanswered question I asked about dependencies when they were originally
> posted is still outstanding...
Apologies on messing this up. The only dependency on these two patches is a
Documentation change I made to clean up the rpm/smd/smd-regulator information.
I had moved the regulator information out of the rpm-smd file and made it into
its own file.
I can add this into the patch set so that all of it is in one place. I'll also
move the regulator specific document to the regulator documentation directory
where it probably should belong.
Andy