This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
watchdog.
Signed-off-by: Mans Rullgard <[email protected]>
---
Changes:
- #include bitops.h
- clk_disable_unprepare() on failure
---
drivers/watchdog/Kconfig | 10 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/tangox_wdt.c | 225 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/watchdog/tangox_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7a8a6c6..f43ff7a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -135,6 +135,16 @@ config MENF21BMC_WATCHDOG
This driver can also be built as a module. If so the module
will be called menf21bmc_wdt.
+config TANGOX_WATCHDOG
+ tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
+ select WATCHDOG_CORE
+ depends on ARCH_TANGOX || COMPILE_TEST
+ help
+ Support for the watchdog in Sigma Designs SMP86xx (tango3)
+ and SMP87xx (tango4) family chips.
+
+ This driver can be built as a module. The module name is tangox_wdt.
+
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 53d4827..46cb387 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -187,6 +187,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
+obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
new file mode 100644
index 0000000..b9ee624
--- /dev/null
+++ b/drivers/watchdog/tangox_wdt.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2015 Mans Rullgard <[email protected]>
+ * SMP86xx/SMP87xx Watchdog driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout");
+
+/*
+ * Counter counts down from programmed value. Reset asserts when
+ * the counter reaches 1.
+ */
+#define WD_COUNTER 0
+
+#define WD_CONFIG 4
+#define WD_CONFIG_XTAL_IN BIT(0)
+#define WD_CONFIG_DISABLE BIT(31)
+
+struct tangox_wdt_device {
+ struct watchdog_device wdt;
+ void __iomem *base;
+ unsigned long clk_rate;
+ struct clk *clk;
+ struct notifier_block restart;
+};
+
+static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
+ unsigned int new_timeout)
+{
+ wdt->timeout = new_timeout;
+
+ return 0;
+}
+
+static int tangox_wdt_start(struct watchdog_device *wdt)
+{
+ struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+ u32 ticks;
+
+ ticks = 1 + wdt->timeout * dev->clk_rate;
+ writel(ticks, dev->base + WD_COUNTER);
+
+ return 0;
+}
+
+static int tangox_wdt_stop(struct watchdog_device *wdt)
+{
+ struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+
+ writel(0, dev->base + WD_COUNTER);
+
+ return 0;
+}
+
+static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+ struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+ u32 count;
+
+ count = readl(dev->base + WD_COUNTER);
+
+ if (!count)
+ return 0;
+
+ return (count - 1) / dev->clk_rate;
+}
+
+static const struct watchdog_info tangox_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "tangox watchdog",
+};
+
+static const struct watchdog_ops tangox_wdt_ops = {
+ .start = tangox_wdt_start,
+ .stop = tangox_wdt_stop,
+ .set_timeout = tangox_wdt_set_timeout,
+ .get_timeleft = tangox_wdt_get_timeleft,
+};
+
+static int tangox_wdt_restart(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct tangox_wdt_device *dev =
+ container_of(nb, struct tangox_wdt_device, restart);
+
+ writel(1, dev->base + WD_COUNTER);
+
+ return NOTIFY_DONE;
+}
+
+static int tangox_wdt_probe(struct platform_device *pdev)
+{
+ struct tangox_wdt_device *dev;
+ struct resource *res;
+ u32 config;
+ int err;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dev->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+
+ err = clk_prepare_enable(dev->clk);
+ if (err)
+ return err;
+
+ dev->clk_rate = clk_get_rate(dev->clk);
+
+ dev->wdt.parent = &pdev->dev;
+ dev->wdt.info = &tangox_wdt_info;
+ dev->wdt.ops = &tangox_wdt_ops;
+ dev->wdt.timeout = DEFAULT_TIMEOUT;
+ dev->wdt.min_timeout = 1;
+ dev->wdt.max_timeout = (U32_MAX - 1) / dev->clk_rate;
+
+ watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
+ watchdog_set_nowayout(&dev->wdt, nowayout);
+ watchdog_set_drvdata(&dev->wdt, dev);
+
+ /*
+ * Deactivate counter if disable bit is set to avoid
+ * accidental reset.
+ */
+ config = readl(dev->base + WD_CONFIG);
+ if (config & WD_CONFIG_DISABLE)
+ writel(0, dev->base + WD_COUNTER);
+
+ writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
+
+ /*
+ * Mark as active and restart with configured timeout if
+ * already running.
+ */
+ if (readl(dev->base + WD_COUNTER)) {
+ set_bit(WDOG_ACTIVE, &dev->wdt.status);
+ tangox_wdt_start(&dev->wdt);
+ }
+
+ err = watchdog_register_device(&dev->wdt);
+ if (err) {
+ clk_disable_unprepare(dev->clk);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ dev->restart.notifier_call = tangox_wdt_restart;
+ dev->restart.priority = 128;
+ err = register_restart_handler(&dev->restart);
+ if (err)
+ dev_warn(&pdev->dev, "failed to register restart handler\n");
+
+ dev_info(dev->wdt.dev, "SMP86xx/SMP87xx watchdog registered\n");
+
+ return 0;
+}
+
+static int tangox_wdt_remove(struct platform_device *pdev)
+{
+ struct tangox_wdt_device *dev = platform_get_drvdata(pdev);
+
+ tangox_wdt_stop(&dev->wdt);
+ clk_disable_unprepare(dev->clk);
+
+ unregister_restart_handler(&dev->restart);
+ watchdog_unregister_device(&dev->wdt);
+
+ return 0;
+}
+
+static const struct of_device_id tangox_wdt_dt_ids[] = {
+ { .compatible = "sigma,smp8642-wdt" },
+ { .compatible = "sigma,smp8759-wdt" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids);
+
+static struct platform_driver tangox_wdt_driver = {
+ .probe = tangox_wdt_probe,
+ .remove = tangox_wdt_remove,
+ .driver = {
+ .name = "tangox-wdt",
+ .of_match_table = tangox_wdt_dt_ids,
+ },
+};
+
+module_platform_driver(tangox_wdt_driver);
+
+MODULE_AUTHOR("Mans Rullgard <[email protected]>");
+MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver");
+MODULE_LICENSE("GPL");
--
2.6.3
On 11/19/2015 02:09 PM, Mans Rullgard wrote:
> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
> watchdog.
>
> Signed-off-by: Mans Rullgard <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Did you send the bindings document to some other mailing list (only) ?
I see "PATCH 2/2" in some of your submissions, but I seem to be missing
patch 1/2.
Thanks,
Guenter
> ---
> Changes:
> - #include bitops.h
> - clk_disable_unprepare() on failure
> ---
> drivers/watchdog/Kconfig | 10 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/tangox_wdt.c | 225 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 236 insertions(+)
> create mode 100644 drivers/watchdog/tangox_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7a8a6c6..f43ff7a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -135,6 +135,16 @@ config MENF21BMC_WATCHDOG
> This driver can also be built as a module. If so the module
> will be called menf21bmc_wdt.
>
> +config TANGOX_WATCHDOG
> + tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
> + select WATCHDOG_CORE
> + depends on ARCH_TANGOX || COMPILE_TEST
> + help
> + Support for the watchdog in Sigma Designs SMP86xx (tango3)
> + and SMP87xx (tango4) family chips.
> +
> + This driver can be built as a module. The module name is tangox_wdt.
> +
> config WM831X_WATCHDOG
> tristate "WM831x watchdog"
> depends on MFD_WM831X
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 53d4827..46cb387 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -187,6 +187,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
> obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
> obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
> +obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
> new file mode 100644
> index 0000000..b9ee624
> --- /dev/null
> +++ b/drivers/watchdog/tangox_wdt.c
> @@ -0,0 +1,225 @@
> +/*
> + * Copyright (C) 2015 Mans Rullgard <[email protected]>
> + * SMP86xx/SMP87xx Watchdog driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/watchdog.h>
> +
> +#define DEFAULT_TIMEOUT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static unsigned int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout");
> +
> +/*
> + * Counter counts down from programmed value. Reset asserts when
> + * the counter reaches 1.
> + */
> +#define WD_COUNTER 0
> +
> +#define WD_CONFIG 4
> +#define WD_CONFIG_XTAL_IN BIT(0)
> +#define WD_CONFIG_DISABLE BIT(31)
> +
> +struct tangox_wdt_device {
> + struct watchdog_device wdt;
> + void __iomem *base;
> + unsigned long clk_rate;
> + struct clk *clk;
> + struct notifier_block restart;
> +};
> +
> +static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
> + unsigned int new_timeout)
> +{
> + wdt->timeout = new_timeout;
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_start(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 ticks;
> +
> + ticks = 1 + wdt->timeout * dev->clk_rate;
> + writel(ticks, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> +
> + writel(0, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 count;
> +
> + count = readl(dev->base + WD_COUNTER);
> +
> + if (!count)
> + return 0;
> +
> + return (count - 1) / dev->clk_rate;
> +}
> +
> +static const struct watchdog_info tangox_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "tangox watchdog",
> +};
> +
> +static const struct watchdog_ops tangox_wdt_ops = {
> + .start = tangox_wdt_start,
> + .stop = tangox_wdt_stop,
> + .set_timeout = tangox_wdt_set_timeout,
> + .get_timeleft = tangox_wdt_get_timeleft,
> +};
> +
> +static int tangox_wdt_restart(struct notifier_block *nb, unsigned long action,
> + void *data)
> +{
> + struct tangox_wdt_device *dev =
> + container_of(nb, struct tangox_wdt_device, restart);
> +
> + writel(1, dev->base + WD_COUNTER);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int tangox_wdt_probe(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev;
> + struct resource *res;
> + u32 config;
> + int err;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dev->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + err = clk_prepare_enable(dev->clk);
> + if (err)
> + return err;
> +
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + dev->wdt.parent = &pdev->dev;
> + dev->wdt.info = &tangox_wdt_info;
> + dev->wdt.ops = &tangox_wdt_ops;
> + dev->wdt.timeout = DEFAULT_TIMEOUT;
> + dev->wdt.min_timeout = 1;
> + dev->wdt.max_timeout = (U32_MAX - 1) / dev->clk_rate;
> +
> + watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
> + watchdog_set_nowayout(&dev->wdt, nowayout);
> + watchdog_set_drvdata(&dev->wdt, dev);
> +
> + /*
> + * Deactivate counter if disable bit is set to avoid
> + * accidental reset.
> + */
> + config = readl(dev->base + WD_CONFIG);
> + if (config & WD_CONFIG_DISABLE)
> + writel(0, dev->base + WD_COUNTER);
> +
> + writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
> +
> + /*
> + * Mark as active and restart with configured timeout if
> + * already running.
> + */
> + if (readl(dev->base + WD_COUNTER)) {
> + set_bit(WDOG_ACTIVE, &dev->wdt.status);
> + tangox_wdt_start(&dev->wdt);
> + }
> +
> + err = watchdog_register_device(&dev->wdt);
> + if (err) {
> + clk_disable_unprepare(dev->clk);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + dev->restart.notifier_call = tangox_wdt_restart;
> + dev->restart.priority = 128;
> + err = register_restart_handler(&dev->restart);
> + if (err)
> + dev_warn(&pdev->dev, "failed to register restart handler\n");
> +
> + dev_info(dev->wdt.dev, "SMP86xx/SMP87xx watchdog registered\n");
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_remove(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev = platform_get_drvdata(pdev);
> +
> + tangox_wdt_stop(&dev->wdt);
> + clk_disable_unprepare(dev->clk);
> +
> + unregister_restart_handler(&dev->restart);
> + watchdog_unregister_device(&dev->wdt);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tangox_wdt_dt_ids[] = {
> + { .compatible = "sigma,smp8642-wdt" },
> + { .compatible = "sigma,smp8759-wdt" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids);
> +
> +static struct platform_driver tangox_wdt_driver = {
> + .probe = tangox_wdt_probe,
> + .remove = tangox_wdt_remove,
> + .driver = {
> + .name = "tangox-wdt",
> + .of_match_table = tangox_wdt_dt_ids,
> + },
> +};
> +
> +module_platform_driver(tangox_wdt_driver);
> +
> +MODULE_AUTHOR("Mans Rullgard <[email protected]>");
> +MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver");
> +MODULE_LICENSE("GPL");
>
Guenter Roeck <[email protected]> writes:
> On 11/19/2015 02:09 PM, Mans Rullgard wrote:
>> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
>> watchdog.
>>
>> Signed-off-by: Mans Rullgard <[email protected]>
>
> Reviewed-by: Guenter Roeck <[email protected]>
>
> Did you send the bindings document to some other mailing list (only) ?
> I see "PATCH 2/2" in some of your submissions, but I seem to be missing
> patch 1/2.
Blame scripts/get_maintaintainer.pl for that. Anyway, here it is:
http://article.gmane.org/gmane.linux.drivers.devicetree/144423
--
M?ns Rullg?rd
[email protected]
On Fri, Nov 20, 2015 at 02:37:10AM +0000, M?ns Rullg?rd wrote:
> Guenter Roeck <[email protected]> writes:
>
> > On 11/19/2015 02:09 PM, Mans Rullgard wrote:
> >> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
> >> watchdog.
> >>
> >> Signed-off-by: Mans Rullgard <[email protected]>
> >
> > Reviewed-by: Guenter Roeck <[email protected]>
> >
> > Did you send the bindings document to some other mailing list (only) ?
> > I see "PATCH 2/2" in some of your submissions, but I seem to be missing
> > patch 1/2.
>
> Blame scripts/get_maintaintainer.pl for that. Anyway, here it is:
> http://article.gmane.org/gmane.linux.drivers.devicetree/144423
>
;-). Found it, thanks.
Guenter
Hi,
> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
> watchdog.
>
> Signed-off-by: Mans Rullgard <[email protected]>
> ---
> Changes:
> - #include bitops.h
> - clk_disable_unprepare() on failure
> ---
> drivers/watchdog/Kconfig | 10 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/tangox_wdt.c | 225 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 236 insertions(+)
> create mode 100644 drivers/watchdog/tangox_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7a8a6c6..f43ff7a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -135,6 +135,16 @@ config MENF21BMC_WATCHDOG
> This driver can also be built as a module. If so the module
> will be called menf21bmc_wdt.
>
> +config TANGOX_WATCHDOG
> + tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
> + select WATCHDOG_CORE
> + depends on ARCH_TANGOX || COMPILE_TEST
> + help
> + Support for the watchdog in Sigma Designs SMP86xx (tango3)
> + and SMP87xx (tango4) family chips.
> +
> + This driver can be built as a module. The module name is tangox_wdt.
> +
> config WM831X_WATCHDOG
> tristate "WM831x watchdog"
> depends on MFD_WM831X
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 53d4827..46cb387 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -187,6 +187,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
> obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
> obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
> +obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
> new file mode 100644
> index 0000000..b9ee624
> --- /dev/null
> +++ b/drivers/watchdog/tangox_wdt.c
> @@ -0,0 +1,225 @@
> +/*
> + * Copyright (C) 2015 Mans Rullgard <[email protected]>
> + * SMP86xx/SMP87xx Watchdog driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/watchdog.h>
> +
> +#define DEFAULT_TIMEOUT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static unsigned int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout");
> +
> +/*
> + * Counter counts down from programmed value. Reset asserts when
> + * the counter reaches 1.
> + */
> +#define WD_COUNTER 0
> +
> +#define WD_CONFIG 4
> +#define WD_CONFIG_XTAL_IN BIT(0)
> +#define WD_CONFIG_DISABLE BIT(31)
> +
> +struct tangox_wdt_device {
> + struct watchdog_device wdt;
> + void __iomem *base;
> + unsigned long clk_rate;
> + struct clk *clk;
> + struct notifier_block restart;
> +};
> +
> +static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
> + unsigned int new_timeout)
> +{
> + wdt->timeout = new_timeout;
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_start(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 ticks;
> +
> + ticks = 1 + wdt->timeout * dev->clk_rate;
> + writel(ticks, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> +
> + writel(0, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 count;
> +
> + count = readl(dev->base + WD_COUNTER);
> +
> + if (!count)
> + return 0;
> +
> + return (count - 1) / dev->clk_rate;
> +}
> +
> +static const struct watchdog_info tangox_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "tangox watchdog",
> +};
> +
> +static const struct watchdog_ops tangox_wdt_ops = {
> + .start = tangox_wdt_start,
> + .stop = tangox_wdt_stop,
> + .set_timeout = tangox_wdt_set_timeout,
> + .get_timeleft = tangox_wdt_get_timeleft,
> +};
> +
> +static int tangox_wdt_restart(struct notifier_block *nb, unsigned long action,
> + void *data)
> +{
> + struct tangox_wdt_device *dev =
> + container_of(nb, struct tangox_wdt_device, restart);
> +
> + writel(1, dev->base + WD_COUNTER);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int tangox_wdt_probe(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev;
> + struct resource *res;
> + u32 config;
> + int err;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dev->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + err = clk_prepare_enable(dev->clk);
> + if (err)
> + return err;
> +
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + dev->wdt.parent = &pdev->dev;
> + dev->wdt.info = &tangox_wdt_info;
> + dev->wdt.ops = &tangox_wdt_ops;
> + dev->wdt.timeout = DEFAULT_TIMEOUT;
> + dev->wdt.min_timeout = 1;
> + dev->wdt.max_timeout = (U32_MAX - 1) / dev->clk_rate;
> +
> + watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
> + watchdog_set_nowayout(&dev->wdt, nowayout);
> + watchdog_set_drvdata(&dev->wdt, dev);
> +
> + /*
> + * Deactivate counter if disable bit is set to avoid
> + * accidental reset.
> + */
> + config = readl(dev->base + WD_CONFIG);
> + if (config & WD_CONFIG_DISABLE)
> + writel(0, dev->base + WD_COUNTER);
> +
> + writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
> +
> + /*
> + * Mark as active and restart with configured timeout if
> + * already running.
> + */
> + if (readl(dev->base + WD_COUNTER)) {
> + set_bit(WDOG_ACTIVE, &dev->wdt.status);
> + tangox_wdt_start(&dev->wdt);
> + }
> +
> + err = watchdog_register_device(&dev->wdt);
> + if (err) {
> + clk_disable_unprepare(dev->clk);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + dev->restart.notifier_call = tangox_wdt_restart;
> + dev->restart.priority = 128;
> + err = register_restart_handler(&dev->restart);
> + if (err)
> + dev_warn(&pdev->dev, "failed to register restart handler\n");
> +
> + dev_info(dev->wdt.dev, "SMP86xx/SMP87xx watchdog registered\n");
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_remove(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev = platform_get_drvdata(pdev);
> +
> + tangox_wdt_stop(&dev->wdt);
> + clk_disable_unprepare(dev->clk);
> +
> + unregister_restart_handler(&dev->restart);
> + watchdog_unregister_device(&dev->wdt);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tangox_wdt_dt_ids[] = {
> + { .compatible = "sigma,smp8642-wdt" },
> + { .compatible = "sigma,smp8759-wdt" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids);
> +
> +static struct platform_driver tangox_wdt_driver = {
> + .probe = tangox_wdt_probe,
> + .remove = tangox_wdt_remove,
> + .driver = {
> + .name = "tangox-wdt",
> + .of_match_table = tangox_wdt_dt_ids,
> + },
> +};
> +
> +module_platform_driver(tangox_wdt_driver);
> +
> +MODULE_AUTHOR("Mans Rullgard <[email protected]>");
> +MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver");
> +MODULE_LICENSE("GPL");
> --
> 2.6.3
>
This patch (together with the addition of the DT properties patch) has been added to linux-watchdog-next.
Kind regards,
Wim.