Provides an optional config (CONFIG_FREELIST_RANDOM) to randomize the
SLAB freelist. The list is randomized during initialization of a new set
of pages. The order on different freelist sizes is pre-computed at boot
for performance. Each kmem_cache has its own randomized freelist. Before
pre-computed lists are available freelists are generated
dynamically. This security feature reduces the predictability of the
kernel SLAB allocator against heap overflows rendering attacks much less
stable.
For example this attack against SLUB (also applicable against SLAB)
would be affected:
https://jon.oberheide.org/blog/2010/09/10/linux-kernel-can-slub-overflow/
Also, since v4.6 the freelist was moved at the end of the SLAB. It means
a controllable heap is opened to new attacks not yet publicly discussed.
A kernel heap overflow can be transformed to multiple use-after-free.
This feature makes this type of attack harder too.
To generate entropy, we use get_random_bytes_arch because 0 bits of
entropy is available in the boot stage. In the worse case this function
will fallback to the get_random_bytes sub API. We also generate a shift
random number to shift pre-computed freelist for each new set of pages.
The config option name is not specific to the SLAB as this approach will
be extended to other allocators like SLUB.
Performance results highlighted no major changes:
Hackbench (running 90 10 times):
Before average: 0.0698
After average: 0.0663 (-5.01%)
slab_test 1 run on boot. Difference only seen on the 2048 size test
being the worse case scenario covered by freelist randomization. New
slab pages are constantly being created on the 10000 allocations.
Variance should be mainly due to getting new pages every few
allocations.
Before:
Single thread testing
=====================
1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 99 cycles kfree -> 112 cycles
10000 times kmalloc(16) -> 109 cycles kfree -> 140 cycles
10000 times kmalloc(32) -> 129 cycles kfree -> 137 cycles
10000 times kmalloc(64) -> 141 cycles kfree -> 141 cycles
10000 times kmalloc(128) -> 152 cycles kfree -> 148 cycles
10000 times kmalloc(256) -> 195 cycles kfree -> 167 cycles
10000 times kmalloc(512) -> 257 cycles kfree -> 199 cycles
10000 times kmalloc(1024) -> 393 cycles kfree -> 251 cycles
10000 times kmalloc(2048) -> 649 cycles kfree -> 228 cycles
10000 times kmalloc(4096) -> 806 cycles kfree -> 370 cycles
10000 times kmalloc(8192) -> 814 cycles kfree -> 411 cycles
10000 times kmalloc(16384) -> 892 cycles kfree -> 455 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 121 cycles
10000 times kmalloc(16)/kfree -> 121 cycles
10000 times kmalloc(32)/kfree -> 121 cycles
10000 times kmalloc(64)/kfree -> 121 cycles
10000 times kmalloc(128)/kfree -> 121 cycles
10000 times kmalloc(256)/kfree -> 119 cycles
10000 times kmalloc(512)/kfree -> 119 cycles
10000 times kmalloc(1024)/kfree -> 119 cycles
10000 times kmalloc(2048)/kfree -> 119 cycles
10000 times kmalloc(4096)/kfree -> 121 cycles
10000 times kmalloc(8192)/kfree -> 119 cycles
10000 times kmalloc(16384)/kfree -> 119 cycles
After:
Single thread testing
=====================
1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 130 cycles kfree -> 86 cycles
10000 times kmalloc(16) -> 118 cycles kfree -> 86 cycles
10000 times kmalloc(32) -> 121 cycles kfree -> 85 cycles
10000 times kmalloc(64) -> 176 cycles kfree -> 102 cycles
10000 times kmalloc(128) -> 178 cycles kfree -> 100 cycles
10000 times kmalloc(256) -> 205 cycles kfree -> 109 cycles
10000 times kmalloc(512) -> 262 cycles kfree -> 136 cycles
10000 times kmalloc(1024) -> 342 cycles kfree -> 157 cycles
10000 times kmalloc(2048) -> 701 cycles kfree -> 238 cycles
10000 times kmalloc(4096) -> 803 cycles kfree -> 364 cycles
10000 times kmalloc(8192) -> 835 cycles kfree -> 404 cycles
10000 times kmalloc(16384) -> 896 cycles kfree -> 441 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 121 cycles
10000 times kmalloc(16)/kfree -> 121 cycles
10000 times kmalloc(32)/kfree -> 123 cycles
10000 times kmalloc(64)/kfree -> 142 cycles
10000 times kmalloc(128)/kfree -> 121 cycles
10000 times kmalloc(256)/kfree -> 119 cycles
10000 times kmalloc(512)/kfree -> 119 cycles
10000 times kmalloc(1024)/kfree -> 119 cycles
10000 times kmalloc(2048)/kfree -> 119 cycles
10000 times kmalloc(4096)/kfree -> 119 cycles
10000 times kmalloc(8192)/kfree -> 119 cycles
10000 times kmalloc(16384)/kfree -> 119 cycles
Signed-off-by: Thomas Garnier <[email protected]>
Acked-by: Christoph Lameter <[email protected]>
---
Based on next-20160422
---
include/linux/slab_def.h | 4 ++
init/Kconfig | 9 +++
mm/slab.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 178 insertions(+), 2 deletions(-)
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 9edbbf3..182ec26 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -80,6 +80,10 @@ struct kmem_cache {
struct kasan_cache kasan_info;
#endif
+#ifdef CONFIG_FREELIST_RANDOM
+ void *random_seq;
+#endif
+
struct kmem_cache_node *node[MAX_NUMNODES];
};
diff --git a/init/Kconfig b/init/Kconfig
index 0c66640..73453d0 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1742,6 +1742,15 @@ config SLOB
endchoice
+config FREELIST_RANDOM
+ default n
+ depends on SLAB
+ bool "SLAB freelist randomization"
+ help
+ Randomizes the freelist order used on creating new SLABs. This
+ security feature reduces the predictability of the kernel slab
+ allocator against heap overflows.
+
config SLUB_CPU_PARTIAL
default y
depends on SLUB && SMP
diff --git a/mm/slab.c b/mm/slab.c
index b82ee6b..0ed728a 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1230,6 +1230,61 @@ static void __init set_up_node(struct kmem_cache *cachep, int index)
}
}
+#ifdef CONFIG_FREELIST_RANDOM
+static void freelist_randomize(struct rnd_state *state, freelist_idx_t *list,
+ size_t count)
+{
+ size_t i;
+ unsigned int rand;
+
+ for (i = 0; i < count; i++)
+ list[i] = i;
+
+ /* Fisher-Yates shuffle */
+ for (i = count - 1; i > 0; i--) {
+ rand = prandom_u32_state(state);
+ rand %= (i + 1);
+ swap(list[i], list[rand]);
+ }
+}
+
+/* Create a random sequence per cache */
+static int cache_random_seq_create(struct kmem_cache *cachep)
+{
+ unsigned int seed, count = cachep->num;
+ struct rnd_state state;
+
+ if (count < 2)
+ return 0;
+
+ /* If it fails, we will just use the global lists */
+ cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
+ if (!cachep->random_seq)
+ return -ENOMEM;
+
+ /* Get best entropy at this stage */
+ get_random_bytes_arch(&seed, sizeof(seed));
+ prandom_seed_state(&state, seed);
+
+ freelist_randomize(&state, cachep->random_seq, count);
+ return 0;
+}
+
+/* Destroy the per-cache random freelist sequence */
+static void cache_random_seq_destroy(struct kmem_cache *cachep)
+{
+ kfree(cachep->random_seq);
+ cachep->random_seq = NULL;
+}
+#else
+static inline int cache_random_seq_create(struct kmem_cache *cachep)
+{
+ return 0;
+}
+static inline void cache_random_seq_destroy(struct kmem_cache *cachep) { }
+#endif /* CONFIG_FREELIST_RANDOM */
+
+
/*
* Initialisation. Called after the page allocator have been initialised and
* before smp_init().
@@ -2337,6 +2392,8 @@ void __kmem_cache_release(struct kmem_cache *cachep)
int i;
struct kmem_cache_node *n;
+ cache_random_seq_destroy(cachep);
+
free_percpu(cachep->cpu_cache);
/* NUMA: free the node structures */
@@ -2443,15 +2500,115 @@ static void cache_init_objs_debug(struct kmem_cache *cachep, struct page *page)
#endif
}
+#ifdef CONFIG_FREELIST_RANDOM
+/* Hold information during a freelist initialization */
+union freelist_init_state {
+ struct {
+ unsigned int pos;
+ freelist_idx_t *list;
+ unsigned int count;
+ unsigned int rand;
+ };
+ struct rnd_state rnd_state;
+};
+
+/*
+ * Initialize the state based on the randomization methode available.
+ * return true if the pre-computed list is available, false otherwize.
+ */
+static bool freelist_state_initialize(union freelist_init_state *state,
+ struct kmem_cache *cachep,
+ unsigned int count)
+{
+ bool ret;
+ unsigned int rand;
+
+ /* Use best entropy available to define a random shift */
+ get_random_bytes_arch(&rand, sizeof(rand));
+
+ /* Use a random state if the pre-computed list is not available */
+ if (!cachep->random_seq) {
+ prandom_seed_state(&state->rnd_state, rand);
+ ret = false;
+ } else {
+ state->list = cachep->random_seq;
+ state->count = count;
+ state->pos = 0;
+ state->rand = rand;
+ ret = true;
+ }
+ return ret;
+}
+
+/* Get the next entry on the list and randomize it using a random shift */
+static freelist_idx_t next_random_slot(union freelist_init_state *state)
+{
+ return (state->list[state->pos++] + state->rand) % state->count;
+}
+
+/*
+ * Shuffle the freelist initialization state based on pre-computed lists.
+ * return true if the list was successfully shuffled, false otherwise.
+ */
+static bool shuffle_freelist(struct kmem_cache *cachep, struct page *page)
+{
+ unsigned int objfreelist = 0, i, count = cachep->num;
+ union freelist_init_state state;
+ bool precomputed;
+
+ if (count < 2)
+ return false;
+
+ precomputed = freelist_state_initialize(&state, cachep, count);
+
+ /* Take a random entry as the objfreelist */
+ if (OBJFREELIST_SLAB(cachep)) {
+ if (!precomputed)
+ objfreelist = count - 1;
+ else
+ objfreelist = next_random_slot(&state);
+ page->freelist = index_to_obj(cachep, page, objfreelist) +
+ obj_offset(cachep);
+ count--;
+ }
+
+ /*
+ * On early boot, generate the list dynamically.
+ * Later use a pre-computed list for speed.
+ */
+ if (!precomputed) {
+ freelist_randomize(&state.rnd_state, page->freelist, count);
+ } else {
+ for (i = 0; i < count; i++)
+ set_free_obj(page, i, next_random_slot(&state));
+ }
+
+ if (OBJFREELIST_SLAB(cachep))
+ set_free_obj(page, cachep->num - 1, objfreelist);
+
+ return true;
+}
+#else
+static inline bool shuffle_freelist(struct kmem_cache *cachep,
+ struct page *page)
+{
+ return false;
+}
+#endif /* CONFIG_FREELIST_RANDOM */
+
static void cache_init_objs(struct kmem_cache *cachep,
struct page *page)
{
int i;
void *objp;
+ bool shuffled;
cache_init_objs_debug(cachep, page);
- if (OBJFREELIST_SLAB(cachep)) {
+ /* Try to randomize the freelist if enabled */
+ shuffled = shuffle_freelist(cachep, page);
+
+ if (!shuffled && OBJFREELIST_SLAB(cachep)) {
page->freelist = index_to_obj(cachep, page, cachep->num - 1) +
obj_offset(cachep);
}
@@ -2465,7 +2622,8 @@ static void cache_init_objs(struct kmem_cache *cachep,
kasan_poison_object_data(cachep, objp);
}
- set_free_obj(page, i, i);
+ if (!shuffled)
+ set_free_obj(page, i, i);
}
}
@@ -3815,6 +3973,10 @@ static int enable_cpucache(struct kmem_cache *cachep, gfp_t gfp)
int shared = 0;
int batchcount = 0;
+ err = cache_random_seq_create(cachep);
+ if (err)
+ goto end;
+
if (!is_root_cache(cachep)) {
struct kmem_cache *root = memcg_root_cache(cachep);
limit = root->limit;
@@ -3868,6 +4030,7 @@ static int enable_cpucache(struct kmem_cache *cachep, gfp_t gfp)
batchcount = (limit + 1) / 2;
skip_setup:
err = do_tune_cpucache(cachep, limit, batchcount, shared, gfp);
+end:
if (err)
pr_err("enable_cpucache failed for %s, error %d\n",
cachep->name, -err);
--
2.8.0.rc3.226.g39d4020
On Tue, 26 Apr 2016 09:21:10 -0700 Thomas Garnier <[email protected]> wrote:
> Provides an optional config (CONFIG_FREELIST_RANDOM) to randomize the
> SLAB freelist. The list is randomized during initialization of a new set
> of pages. The order on different freelist sizes is pre-computed at boot
> for performance. Each kmem_cache has its own randomized freelist. Before
> pre-computed lists are available freelists are generated
> dynamically. This security feature reduces the predictability of the
> kernel SLAB allocator against heap overflows rendering attacks much less
> stable.
>
> For example this attack against SLUB (also applicable against SLAB)
> would be affected:
> https://jon.oberheide.org/blog/2010/09/10/linux-kernel-can-slub-overflow/
>
> Also, since v4.6 the freelist was moved at the end of the SLAB. It means
> a controllable heap is opened to new attacks not yet publicly discussed.
> A kernel heap overflow can be transformed to multiple use-after-free.
> This feature makes this type of attack harder too.
>
> To generate entropy, we use get_random_bytes_arch because 0 bits of
> entropy is available in the boot stage. In the worse case this function
> will fallback to the get_random_bytes sub API. We also generate a shift
> random number to shift pre-computed freelist for each new set of pages.
>
> The config option name is not specific to the SLAB as this approach will
> be extended to other allocators like SLUB.
>
> Performance results highlighted no major changes:
>
> Hackbench (running 90 10 times):
>
> Before average: 0.0698
> After average: 0.0663 (-5.01%)
>
> slab_test 1 run on boot. Difference only seen on the 2048 size test
> being the worse case scenario covered by freelist randomization. New
> slab pages are constantly being created on the 10000 allocations.
> Variance should be mainly due to getting new pages every few
> allocations.
>
> ...
>
> --- a/include/linux/slab_def.h
> +++ b/include/linux/slab_def.h
> @@ -80,6 +80,10 @@ struct kmem_cache {
> struct kasan_cache kasan_info;
> #endif
>
> +#ifdef CONFIG_FREELIST_RANDOM
> + void *random_seq;
> +#endif
> +
> struct kmem_cache_node *node[MAX_NUMNODES];
> };
>
> diff --git a/init/Kconfig b/init/Kconfig
> index 0c66640..73453d0 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1742,6 +1742,15 @@ config SLOB
>
> endchoice
>
> +config FREELIST_RANDOM
> + default n
> + depends on SLAB
> + bool "SLAB freelist randomization"
> + help
> + Randomizes the freelist order used on creating new SLABs. This
> + security feature reduces the predictability of the kernel slab
> + allocator against heap overflows.
Against the v2 patch I didst observe:
: CONFIG_FREELIST_RANDOM bugs me a bit - "freelist" is so vague.
: CONFIG_SLAB_FREELIST_RANDOM would be better. I mean, what Kconfig
: identifier could be used for implementing randomisation in
: slub/slob/etc once CONFIG_FREELIST_RANDOM is used up?
but this pearl appeared to pass unnoticed.
> config SLUB_CPU_PARTIAL
> default y
> depends on SLUB && SMP
> diff --git a/mm/slab.c b/mm/slab.c
> index b82ee6b..0ed728a 100644
> --- a/mm/slab.c
> +++ b/mm/slab.c
> @@ -1230,6 +1230,61 @@ static void __init set_up_node(struct kmem_cache *cachep, int index)
> }
> }
>
> +#ifdef CONFIG_FREELIST_RANDOM
> +static void freelist_randomize(struct rnd_state *state, freelist_idx_t *list,
> + size_t count)
> +{
> + size_t i;
> + unsigned int rand;
> +
> + for (i = 0; i < count; i++)
> + list[i] = i;
> +
> + /* Fisher-Yates shuffle */
> + for (i = count - 1; i > 0; i--) {
> + rand = prandom_u32_state(state);
> + rand %= (i + 1);
> + swap(list[i], list[rand]);
> + }
> +}
> +
> +/* Create a random sequence per cache */
> +static int cache_random_seq_create(struct kmem_cache *cachep)
> +{
> + unsigned int seed, count = cachep->num;
> + struct rnd_state state;
> +
> + if (count < 2)
> + return 0;
> +
> + /* If it fails, we will just use the global lists */
> + cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
> + if (!cachep->random_seq)
> + return -ENOMEM;
OK, no BUG. If this happens, kmem_cache_init_late() will go BUG
instead ;)
Questions for slab maintainers:
What's going on with the gfp_flags in there? kmem_cache_init_late()
passes GFP_NOWAIT into enable_cpucache().
a) why the heck does it do that? It's __init code!
b) if there's a legit reason then your new cache_random_seq_create()
should be getting its gfp_t from its caller, rather than blindly
assuming GFP_KERNEL.
c) kmem_cache_init_late() goes BUG on ENOMEM. Generally that's OK in
__init code: we assume infinite memory during bootup. But it's really
quite weird to use GFP_NOWAIT and then to go BUG if GFP_NOWAIT had its
predictable outcome (ie: failure).
Finally, all callers of enable_cpucache() (and hence of
cache_random_seq_create()) are __init, so we're unnecessarily bloating
up vmlinux. Could someone please take a look at this as a separate
thing?
> + /* Get best entropy at this stage */
> + get_random_bytes_arch(&seed, sizeof(seed));
> + prandom_seed_state(&state, seed);
> +
> + freelist_randomize(&state, cachep->random_seq, count);
> + return 0;
> +}
> +
>
> ...
>
On Tue, Apr 26, 2016 at 4:17 PM, Andrew Morton
<[email protected]> wrote:
> On Tue, 26 Apr 2016 09:21:10 -0700 Thomas Garnier <[email protected]> wrote:
>
>> Provides an optional config (CONFIG_FREELIST_RANDOM) to randomize the
>> SLAB freelist. The list is randomized during initialization of a new set
>> of pages. The order on different freelist sizes is pre-computed at boot
>> for performance. Each kmem_cache has its own randomized freelist. Before
>> pre-computed lists are available freelists are generated
>> dynamically. This security feature reduces the predictability of the
>> kernel SLAB allocator against heap overflows rendering attacks much less
>> stable.
>>
>> For example this attack against SLUB (also applicable against SLAB)
>> would be affected:
>> https://jon.oberheide.org/blog/2010/09/10/linux-kernel-can-slub-overflow/
>>
>> Also, since v4.6 the freelist was moved at the end of the SLAB. It means
>> a controllable heap is opened to new attacks not yet publicly discussed.
>> A kernel heap overflow can be transformed to multiple use-after-free.
>> This feature makes this type of attack harder too.
>>
>> To generate entropy, we use get_random_bytes_arch because 0 bits of
>> entropy is available in the boot stage. In the worse case this function
>> will fallback to the get_random_bytes sub API. We also generate a shift
>> random number to shift pre-computed freelist for each new set of pages.
>>
>> The config option name is not specific to the SLAB as this approach will
>> be extended to other allocators like SLUB.
>>
>> Performance results highlighted no major changes:
>>
>> Hackbench (running 90 10 times):
>>
>> Before average: 0.0698
>> After average: 0.0663 (-5.01%)
>>
>> slab_test 1 run on boot. Difference only seen on the 2048 size test
>> being the worse case scenario covered by freelist randomization. New
>> slab pages are constantly being created on the 10000 allocations.
>> Variance should be mainly due to getting new pages every few
>> allocations.
>>
>> ...
>>
>> --- a/include/linux/slab_def.h
>> +++ b/include/linux/slab_def.h
>> @@ -80,6 +80,10 @@ struct kmem_cache {
>> struct kasan_cache kasan_info;
>> #endif
>>
>> +#ifdef CONFIG_FREELIST_RANDOM
>> + void *random_seq;
>> +#endif
>> +
>> struct kmem_cache_node *node[MAX_NUMNODES];
>> };
>>
>> diff --git a/init/Kconfig b/init/Kconfig
>> index 0c66640..73453d0 100644
>> --- a/init/Kconfig
>> +++ b/init/Kconfig
>> @@ -1742,6 +1742,15 @@ config SLOB
>>
>> endchoice
>>
>> +config FREELIST_RANDOM
>> + default n
>> + depends on SLAB
>> + bool "SLAB freelist randomization"
>> + help
>> + Randomizes the freelist order used on creating new SLABs. This
>> + security feature reduces the predictability of the kernel slab
>> + allocator against heap overflows.
>
> Against the v2 patch I didst observe:
>
> : CONFIG_FREELIST_RANDOM bugs me a bit - "freelist" is so vague.
> : CONFIG_SLAB_FREELIST_RANDOM would be better. I mean, what Kconfig
> : identifier could be used for implementing randomisation in
> : slub/slob/etc once CONFIG_FREELIST_RANDOM is used up?
>
> but this pearl appeared to pass unnoticed.
>
It was discussed a bit before. The intent is to have a similar feature
for other kernel heap (I know it is possible for SLUB). That's why I
think it make sense to have a similar config name used for all
allocators.
>> config SLUB_CPU_PARTIAL
>> default y
>> depends on SLUB && SMP
>> diff --git a/mm/slab.c b/mm/slab.c
>> index b82ee6b..0ed728a 100644
>> --- a/mm/slab.c
>> +++ b/mm/slab.c
>> @@ -1230,6 +1230,61 @@ static void __init set_up_node(struct kmem_cache *cachep, int index)
>> }
>> }
>>
>> +#ifdef CONFIG_FREELIST_RANDOM
>> +static void freelist_randomize(struct rnd_state *state, freelist_idx_t *list,
>> + size_t count)
>> +{
>> + size_t i;
>> + unsigned int rand;
>> +
>> + for (i = 0; i < count; i++)
>> + list[i] = i;
>> +
>> + /* Fisher-Yates shuffle */
>> + for (i = count - 1; i > 0; i--) {
>> + rand = prandom_u32_state(state);
>> + rand %= (i + 1);
>> + swap(list[i], list[rand]);
>> + }
>> +}
>> +
>> +/* Create a random sequence per cache */
>> +static int cache_random_seq_create(struct kmem_cache *cachep)
>> +{
>> + unsigned int seed, count = cachep->num;
>> + struct rnd_state state;
>> +
>> + if (count < 2)
>> + return 0;
>> +
>> + /* If it fails, we will just use the global lists */
>> + cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
>> + if (!cachep->random_seq)
>> + return -ENOMEM;
>
> OK, no BUG. If this happens, kmem_cache_init_late() will go BUG
> instead ;)
>
Yes, as Christophe asked.
> Questions for slab maintainers:
>
> What's going on with the gfp_flags in there? kmem_cache_init_late()
> passes GFP_NOWAIT into enable_cpucache().
>
> a) why the heck does it do that? It's __init code!
>
> b) if there's a legit reason then your new cache_random_seq_create()
> should be getting its gfp_t from its caller, rather than blindly
> assuming GFP_KERNEL.
>
> c) kmem_cache_init_late() goes BUG on ENOMEM. Generally that's OK in
> __init code: we assume infinite memory during bootup. But it's really
> quite weird to use GFP_NOWAIT and then to go BUG if GFP_NOWAIT had its
> predictable outcome (ie: failure).
>
> Finally, all callers of enable_cpucache() (and hence of
> cache_random_seq_create()) are __init, so we're unnecessarily bloating
> up vmlinux. Could someone please take a look at this as a separate
> thing?
>
>> + /* Get best entropy at this stage */
>> + get_random_bytes_arch(&seed, sizeof(seed));
>> + prandom_seed_state(&state, seed);
>> +
>> + freelist_randomize(&state, cachep->random_seq, count);
>> + return 0;
>> +}
>> +
>>
>> ...
>>
On Tue, Apr 26, 2016 at 04:17:43PM -0700, Andrew Morton wrote:
> On Tue, 26 Apr 2016 09:21:10 -0700 Thomas Garnier <[email protected]> wrote:
>
> > Provides an optional config (CONFIG_FREELIST_RANDOM) to randomize the
> > SLAB freelist. The list is randomized during initialization of a new set
> > of pages. The order on different freelist sizes is pre-computed at boot
> > for performance. Each kmem_cache has its own randomized freelist. Before
> > pre-computed lists are available freelists are generated
> > dynamically. This security feature reduces the predictability of the
> > kernel SLAB allocator against heap overflows rendering attacks much less
> > stable.
> >
> > For example this attack against SLUB (also applicable against SLAB)
> > would be affected:
> > https://jon.oberheide.org/blog/2010/09/10/linux-kernel-can-slub-overflow/
> >
> > Also, since v4.6 the freelist was moved at the end of the SLAB. It means
> > a controllable heap is opened to new attacks not yet publicly discussed.
> > A kernel heap overflow can be transformed to multiple use-after-free.
> > This feature makes this type of attack harder too.
> >
> > To generate entropy, we use get_random_bytes_arch because 0 bits of
> > entropy is available in the boot stage. In the worse case this function
> > will fallback to the get_random_bytes sub API. We also generate a shift
> > random number to shift pre-computed freelist for each new set of pages.
> >
> > The config option name is not specific to the SLAB as this approach will
> > be extended to other allocators like SLUB.
> >
> > Performance results highlighted no major changes:
> >
> > Hackbench (running 90 10 times):
> >
> > Before average: 0.0698
> > After average: 0.0663 (-5.01%)
> >
> > slab_test 1 run on boot. Difference only seen on the 2048 size test
> > being the worse case scenario covered by freelist randomization. New
> > slab pages are constantly being created on the 10000 allocations.
> > Variance should be mainly due to getting new pages every few
> > allocations.
> >
> > ...
> >
> > --- a/include/linux/slab_def.h
> > +++ b/include/linux/slab_def.h
> > @@ -80,6 +80,10 @@ struct kmem_cache {
> > struct kasan_cache kasan_info;
> > #endif
> >
> > +#ifdef CONFIG_FREELIST_RANDOM
> > + void *random_seq;
> > +#endif
> > +
> > struct kmem_cache_node *node[MAX_NUMNODES];
> > };
> >
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 0c66640..73453d0 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -1742,6 +1742,15 @@ config SLOB
> >
> > endchoice
> >
> > +config FREELIST_RANDOM
> > + default n
> > + depends on SLAB
> > + bool "SLAB freelist randomization"
> > + help
> > + Randomizes the freelist order used on creating new SLABs. This
> > + security feature reduces the predictability of the kernel slab
> > + allocator against heap overflows.
>
> Against the v2 patch I didst observe:
>
> : CONFIG_FREELIST_RANDOM bugs me a bit - "freelist" is so vague.
> : CONFIG_SLAB_FREELIST_RANDOM would be better. I mean, what Kconfig
> : identifier could be used for implementing randomisation in
> : slub/slob/etc once CONFIG_FREELIST_RANDOM is used up?
>
> but this pearl appeared to pass unnoticed.
>
> > config SLUB_CPU_PARTIAL
> > default y
> > depends on SLUB && SMP
> > diff --git a/mm/slab.c b/mm/slab.c
> > index b82ee6b..0ed728a 100644
> > --- a/mm/slab.c
> > +++ b/mm/slab.c
> > @@ -1230,6 +1230,61 @@ static void __init set_up_node(struct kmem_cache *cachep, int index)
> > }
> > }
> >
> > +#ifdef CONFIG_FREELIST_RANDOM
> > +static void freelist_randomize(struct rnd_state *state, freelist_idx_t *list,
> > + size_t count)
> > +{
> > + size_t i;
> > + unsigned int rand;
> > +
> > + for (i = 0; i < count; i++)
> > + list[i] = i;
> > +
> > + /* Fisher-Yates shuffle */
> > + for (i = count - 1; i > 0; i--) {
> > + rand = prandom_u32_state(state);
> > + rand %= (i + 1);
> > + swap(list[i], list[rand]);
> > + }
> > +}
> > +
> > +/* Create a random sequence per cache */
> > +static int cache_random_seq_create(struct kmem_cache *cachep)
> > +{
> > + unsigned int seed, count = cachep->num;
> > + struct rnd_state state;
> > +
> > + if (count < 2)
> > + return 0;
> > +
> > + /* If it fails, we will just use the global lists */
> > + cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
> > + if (!cachep->random_seq)
> > + return -ENOMEM;
>
> OK, no BUG. If this happens, kmem_cache_init_late() will go BUG
> instead ;)
>
> Questions for slab maintainers:
>
> What's going on with the gfp_flags in there? kmem_cache_init_late()
> passes GFP_NOWAIT into enable_cpucache().
>
> a) why the heck does it do that? It's __init code!
Until some boot-up point, we should not enable interrupt.
In slab subsystem, If we use __GFP_DIRECT_RECLAIM, it will cause to
enable interrupt when allocating new slab page. GFP_NOWAIT is to
prevent that situation.
Anyway, I audit the code and kmem_cache_init_late() could use
__GFP_DIRECT_RECLAIM because it is called after interrupt is enabled
which means that that's safe time to manipulate interrupt. (See
kmem_cache_init_late() in start_kernel()).
>
> b) if there's a legit reason then your new cache_random_seq_create()
> should be getting its gfp_t from its caller, rather than blindly
> assuming GFP_KERNEL.
In any case, ignoring provided gfp argument isn't good practice.
> c) kmem_cache_init_late() goes BUG on ENOMEM. Generally that's OK in
> __init code: we assume infinite memory during bootup. But it's really
> quite weird to use GFP_NOWAIT and then to go BUG if GFP_NOWAIT had its
> predictable outcome (ie: failure).
I don't think BUG() here is weird code. It just means that if we can't
initialize slab subsystem properly, machine cannot run properly so
BUG().
> Finally, all callers of enable_cpucache() (and hence of
> cache_random_seq_create()) are __init, so we're unnecessarily bloating
> up vmlinux. Could someone please take a look at this as a separate
> thing?
That's not true. It is called whenever new kmem_cache is created.
I don't know concrete reason why setup_cpu_cache() is defined with
__init_refok tag but looks like it needs to be fixed.
I will look at it soon.
Thanks.
On Tue, 26 Apr 2016, Andrew Morton wrote:
> : CONFIG_FREELIST_RANDOM bugs me a bit - "freelist" is so vague.
> : CONFIG_SLAB_FREELIST_RANDOM would be better. I mean, what Kconfig
> : identifier could be used for implementing randomisation in
> : slub/slob/etc once CONFIG_FREELIST_RANDOM is used up?
>
> but this pearl appeared to pass unnoticed.
Ok. lets add SLAB here and then use this option for the other allocators
as well.
> > + /* If it fails, we will just use the global lists */
> > + cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
> > + if (!cachep->random_seq)
> > + return -ENOMEM;
>
> OK, no BUG. If this happens, kmem_cache_init_late() will go BUG
> instead ;)
>
> Questions for slab maintainers:
>
> What's going on with the gfp_flags in there? kmem_cache_init_late()
> passes GFP_NOWAIT into enable_cpucache().
>
> a) why the heck does it do that? It's __init code!
enable_cpucache() was called when a slab cache was reconfigured by writing to /proc/slabinfo.
That was changed awhile back when the memcg changes were made ot slab. So
now its ok to be made init code.
> Finally, all callers of enable_cpucache() (and hence of
> cache_random_seq_create()) are __init, so we're unnecessarily bloating
> up vmlinux. Could someone please take a look at this as a separate
> thing?
Hmmm. Well if that is the case then lots of stuff could be straightened
out. Joonsoo?
On Tue, 26 Apr 2016, Thomas Garnier wrote:
> It was discussed a bit before. The intent is to have a similar feature
> for other kernel heap (I know it is possible for SLUB). That's why I
> think it make sense to have a similar config name used for all
> allocators.
Please use CONFIG_SLAB_FREELIST_RANDOM to signify that it is for all slab
allocators. Not SLAB specific.
On Wed, Apr 27, 2016 at 10:39:29AM -0500, Christoph Lameter wrote:
> On Tue, 26 Apr 2016, Andrew Morton wrote:
>
> > : CONFIG_FREELIST_RANDOM bugs me a bit - "freelist" is so vague.
> > : CONFIG_SLAB_FREELIST_RANDOM would be better. I mean, what Kconfig
> > : identifier could be used for implementing randomisation in
> > : slub/slob/etc once CONFIG_FREELIST_RANDOM is used up?
> >
> > but this pearl appeared to pass unnoticed.
>
> Ok. lets add SLAB here and then use this option for the other allocators
> as well.
>
> > > + /* If it fails, we will just use the global lists */
> > > + cachep->random_seq = kcalloc(count, sizeof(freelist_idx_t), GFP_KERNEL);
> > > + if (!cachep->random_seq)
> > > + return -ENOMEM;
> >
> > OK, no BUG. If this happens, kmem_cache_init_late() will go BUG
> > instead ;)
> >
> > Questions for slab maintainers:
> >
> > What's going on with the gfp_flags in there? kmem_cache_init_late()
> > passes GFP_NOWAIT into enable_cpucache().
> >
> > a) why the heck does it do that? It's __init code!
>
> enable_cpucache() was called when a slab cache was reconfigured by writing to /proc/slabinfo.
> That was changed awhile back when the memcg changes were made ot slab. So
> now its ok to be made init code.
>
> > Finally, all callers of enable_cpucache() (and hence of
> > cache_random_seq_create()) are __init, so we're unnecessarily bloating
> > up vmlinux. Could someone please take a look at this as a separate
> > thing?
>
> Hmmm. Well if that is the case then lots of stuff could be straightened
> out. Joonsoo?
>
As I mentioned in other thread, enable_cpucache() can be called
whenever kmem_cache is created. It should not be __init.
Thanks.