Support setting the reference voltage from the device tree.
Signed-off-by: Clemens Gruber <[email protected]>
---
drivers/hwmon/mcp3021.c | 48 ++++++++++++++++++++++++++++++++++++------------
1 file changed, 36 insertions(+), 12 deletions(-)
diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
index 972444a..7a83690 100644
--- a/drivers/hwmon/mcp3021.c
+++ b/drivers/hwmon/mcp3021.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
* Author: Mingkai Hu <[email protected]>
* Reworked by Sven Schuchmann <[email protected]>
+ * DT support added by Clemens Gruber <[email protected]>
*
* This driver export the value of analog input voltage to sysfs, the
* voltage unit is mV. Through the sysfs interface, lm-sensors tool
@@ -22,11 +23,13 @@
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
-/* Vdd info */
-#define MCP3021_VDD_MAX 5500
-#define MCP3021_VDD_MIN 2700
-#define MCP3021_VDD_REF 3300
+/* Vdd / reference voltage in millivolt */
+#define MCP3021_VDD_REF_MAX 5500
+#define MCP3021_VDD_REF_MIN 2700
+#define MCP3021_VDD_REF_DEFAULT 3300
/* output format */
#define MCP3021_SAR_SHIFT 2
@@ -47,7 +50,7 @@ enum chips {
*/
struct mcp3021_data {
struct device *hwmon_dev;
- u32 vdd; /* device power supply */
+ u32 vdd; /* supply and reference voltage in millivolt */
u16 sar_shift;
u16 sar_mask;
u8 output_res;
@@ -106,6 +109,7 @@ static int mcp3021_probe(struct i2c_client *client,
{
int err;
struct mcp3021_data *data = NULL;
+ struct device_node *np = client->dev.of_node;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
@@ -117,6 +121,21 @@ static int mcp3021_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
+ if (np) {
+ if (!of_property_read_u32(np, "reference-voltage-microvolt",
+ &data->vdd))
+ data->vdd /= 1000;
+ else
+ data->vdd = MCP3021_VDD_REF_DEFAULT;
+ } else {
+ u32 *pdata = dev_get_platdata(&client->dev);
+
+ if (pdata)
+ data->vdd = *pdata;
+ else
+ data->vdd = MCP3021_VDD_REF_DEFAULT;
+ }
+
switch (id->driver_data) {
case mcp3021:
data->sar_shift = MCP3021_SAR_SHIFT;
@@ -131,13 +150,8 @@ static int mcp3021_probe(struct i2c_client *client,
break;
}
- if (dev_get_platdata(&client->dev)) {
- data->vdd = *(u32 *)dev_get_platdata(&client->dev);
- if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
- return -EINVAL;
- } else {
- data->vdd = MCP3021_VDD_REF;
- }
+ if (data->vdd > MCP3021_VDD_REF_MAX || data->vdd < MCP3021_VDD_REF_MIN)
+ return -EINVAL;
err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
if (err)
@@ -173,9 +187,19 @@ static const struct i2c_device_id mcp3021_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mcp3021_id);
+#ifdef CONFIG_OF
+static const struct of_device_id of_mcp3021_match[] = {
+ { .compatible = "microchip,mcp3021", .data = (void *)mcp3021 },
+ { .compatible = "microchip,mcp3221", .data = (void *)mcp3221 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, of_mcp3021_match);
+#endif
+
static struct i2c_driver mcp3021_driver = {
.driver = {
.name = "mcp3021",
+ .of_match_table = of_match_ptr(of_mcp3021_match),
},
.probe = mcp3021_probe,
.remove = mcp3021_remove,
--
2.10.2
On Wed, Nov 09, 2016 at 10:22:34PM +0100, Clemens Gruber wrote:
> Support setting the reference voltage from the device tree.
>
> Signed-off-by: Clemens Gruber <[email protected]>
Applied to -next.
Thanks,
Guenter