2016-11-23 07:43:40

by Jaehoon Chung

Subject: [PATCH] arm64: dts: exynos: enable hs400 mode for eMMC for TM2

TM2 can support the HS400 mode, but eMMC is working as the lowest mode.
This patch added the properties for HS400 and other modes.

Signed-off-by: Jaehoon Chung <[email protected]>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 88cb6c1..f21bdc2 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -701,6 +701,9 @@
&mshc_0 {
status = "okay";
num-slots = <1>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
--
2.10.1

2016-11-23 17:29:37

by Krzysztof Kozlowski

Subject: Re: [PATCH] arm64: dts: exynos: enable hs400 mode for eMMC for TM2

On Wed, Nov 23, 2016 at 04:43:34PM +0900, Jaehoon Chung wrote:
> TM2 can support the HS400 mode, but eMMC is working as the lowest mode.
> This patch added the properties for HS400 and other modes.
>
> Signed-off-by: Jaehoon Chung <[email protected]>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
Thanks, applied.

Best regards,
Krzysztof