2016-12-05 08:18:38

by Baoyou Xie

Subject: [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718

This patch adds the pcu_domain node, so it can be used
by zte-soc's power domain driver.

Signed-off-by: Baoyou Xie <[email protected]>
---
arch/arm64/boot/dts/zte/zx296718.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index b44d1d1..1aa0587 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -302,6 +302,11 @@
reg = <0x116000 0x1000>;
};

+ pcu_domain: pcu@117000 {
+ compatible = "zte,zx296718-pcu";
+ reg = <0x00117000 0x1000>;
+ };
+
uart0: uart@11f000 {
compatible = "arm,pl011", "arm,primecell";
arm,primecell-periphid = <0x001feffe>;
--
2.7.4

2016-12-05 08:55:51

by Shawn Guo

Subject: Re: [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718

On Mon, Dec 05, 2016 at 04:17:51PM +0800, Baoyou Xie wrote:
> This patch adds the pcu_domain node, so it can be used
> by zte-soc's power domain driver.
>
> Signed-off-by: Baoyou Xie <[email protected]>

I'm fine with the patch itself, but I need to wait the driver and
bindings being accepted to apply it.

Shawn

> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index b44d1d1..1aa0587 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -302,6 +302,11 @@
> reg = <0x116000 0x1000>;
> };
>
> + pcu_domain: pcu@117000 {
> + compatible = "zte,zx296718-pcu";
> + reg = <0x00117000 0x1000>;
> + };
> +
> uart0: uart@11f000 {
> compatible = "arm,pl011", "arm,primecell";
> arm,primecell-periphid = <0x001feffe>;
> --
> 2.7.4
>