2016-11-22 17:13:29

by Emmanuel Vadot

[permalink] [raw]
Subject: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
others three only have 1.
Add the num-cs property to each node.

Signed-off-by: Emmanuel Vadot <[email protected]>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 94cf5a1..ed21982 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -871,6 +871,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 4;
};

spi1: spi@01c06000 {
@@ -885,6 +886,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};

emac: ethernet@01c0b000 {
@@ -1037,6 +1039,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};

ahci: sata@01c18000 {
@@ -1079,6 +1082,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};

pio: pinctrl@01c20800 {
--
2.9.2


2016-11-24 19:55:34

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> others three only have 1.
> Add the num-cs property to each node.
>
> Signed-off-by: Emmanuel Vadot <[email protected]>

I don't think we have any code that uses it at the moment. What is the
rationale behind this patch?

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


Attachments:
(No filename) (480.00 B)
signature.asc (801.00 B)
Download all attachments

2016-11-24 20:05:34

by Emmanuel Vadot

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Thu, 24 Nov 2016 20:55:17 +0100
Maxime Ripard <[email protected]> wrote:

> On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> > others three only have 1.
> > Add the num-cs property to each node.
> >
> > Signed-off-by: Emmanuel Vadot <[email protected]>
>
> I don't think we have any code that uses it at the moment. What is the
> rationale behind this patch?
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

Hi Maxime,

If num-cs isn't present nothing prevent to start a transfer with a
non-valid CS pin, resulting in an error.
num-cs are default property especially made for this and a SPI driver
should try to get the property at probe/attach time.

Cheers,

--
Emmanuel Vadot <[email protected]> <[email protected]>

2016-11-25 15:22:32

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote:
> On Thu, 24 Nov 2016 20:55:17 +0100
> Maxime Ripard <[email protected]> wrote:
>
> > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> > > others three only have 1.
> > > Add the num-cs property to each node.
> > >
> > > Signed-off-by: Emmanuel Vadot <[email protected]>
> >
> > I don't think we have any code that uses it at the moment. What is the
> > rationale behind this patch?
> >
> > Thanks!
> > Maxime
> >
> > --
> > Maxime Ripard, Free Electrons
> > Embedded Linux and Kernel engineering
> > http://free-electrons.com
>
> Hi Maxime,
>
> If num-cs isn't present nothing prevent to start a transfer with a
> non-valid CS pin, resulting in an error.
> num-cs are default property especially made for this and a SPI driver
> should try to get the property at probe/attach time.

Yes, but as far as I know, our driver doesn't. I'm all in for having
support for that in our driver, but without it, that patch is kind of
useless.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


Attachments:
(No filename) (1.20 kB)
signature.asc (801.00 B)
Download all attachments

2016-11-25 21:08:39

by Emmanuel Vadot

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Fri, 25 Nov 2016 16:20:47 +0100
Maxime Ripard <[email protected]> wrote:

> On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote:
> > On Thu, 24 Nov 2016 20:55:17 +0100
> > Maxime Ripard <[email protected]> wrote:
> >
> > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> > > > others three only have 1.
> > > > Add the num-cs property to each node.
> > > >
> > > > Signed-off-by: Emmanuel Vadot <[email protected]>
> > >
> > > I don't think we have any code that uses it at the moment. What is the
> > > rationale behind this patch?
> > >
> > > Thanks!
> > > Maxime
> > >
> > > --
> > > Maxime Ripard, Free Electrons
> > > Embedded Linux and Kernel engineering
> > > http://free-electrons.com
> >
> > Hi Maxime,
> >
> > If num-cs isn't present nothing prevent to start a transfer with a
> > non-valid CS pin, resulting in an error.
> > num-cs are default property especially made for this and a SPI driver
> > should try to get the property at probe/attach time.
>
> Yes, but as far as I know, our driver doesn't. I'm all in for having
> support for that in our driver, but without it, that patch is kind of
> useless.
>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

Yes the Linux driver doesn't use it but my upcoming one for FreeBSD
uses it. So it is not useless for downstream user of DTS.

Cheers,

--
Emmanuel Vadot <[email protected]> <[email protected]>

2016-12-01 09:22:05

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

Hi Emmanuel,

On Fri, Nov 25, 2016 at 10:07:52PM +0100, Emmanuel Vadot wrote:
> On Fri, 25 Nov 2016 16:20:47 +0100
> Maxime Ripard <[email protected]> wrote:
>
> > On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote:
> > > On Thu, 24 Nov 2016 20:55:17 +0100
> > > Maxime Ripard <[email protected]> wrote:
> > >
> > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> > > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> > > > > others three only have 1.
> > > > > Add the num-cs property to each node.
> > > > >
> > > > > Signed-off-by: Emmanuel Vadot <[email protected]>
> > > >
> > > > I don't think we have any code that uses it at the moment. What is the
> > > > rationale behind this patch?
> > > >
> > > > Thanks!
> > > > Maxime
> > > >
> > > > --
> > > > Maxime Ripard, Free Electrons
> > > > Embedded Linux and Kernel engineering
> > > > http://free-electrons.com
> > >
> > > Hi Maxime,
> > >
> > > If num-cs isn't present nothing prevent to start a transfer with a
> > > non-valid CS pin, resulting in an error.
> > > num-cs are default property especially made for this and a SPI driver
> > > should try to get the property at probe/attach time.
> >
> > Yes, but as far as I know, our driver doesn't. I'm all in for having
> > support for that in our driver, but without it, that patch is kind of
> > useless.
>
> Yes the Linux driver doesn't use it but my upcoming one for FreeBSD
> uses it. So it is not useless for downstream user of DTS.

Ah, I didn't know this was for FreeBSD. So you started to use our DTs,
or do you have some modifications to it? How does that work?

Anyway, the fact that it isn't used by our driver at the moment and
that it's meant for other OSes should be mentionned in the commit log.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


Attachments:
(No filename) (1.90 kB)
signature.asc (801.00 B)
Download all attachments

2016-12-01 10:24:20

by Emmanuel Vadot

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes


Hi Maxime,

On Thu, 1 Dec 2016 10:21:50 +0100
Maxime Ripard <[email protected]> wrote:

> Hi Emmanuel,
>
> On Fri, Nov 25, 2016 at 10:07:52PM +0100, Emmanuel Vadot wrote:
> > On Fri, 25 Nov 2016 16:20:47 +0100
> > Maxime Ripard <[email protected]> wrote:
> >
> > > On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote:
> > > > On Thu, 24 Nov 2016 20:55:17 +0100
> > > > Maxime Ripard <[email protected]> wrote:
> > > >
> > > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote:
> > > > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
> > > > > > others three only have 1.
> > > > > > Add the num-cs property to each node.
> > > > > >
> > > > > > Signed-off-by: Emmanuel Vadot <[email protected]>
> > > > >
> > > > > I don't think we have any code that uses it at the moment. What is the
> > > > > rationale behind this patch?
> > > > >
> > > > > Thanks!
> > > > > Maxime
> > > > >
> > > > > --
> > > > > Maxime Ripard, Free Electrons
> > > > > Embedded Linux and Kernel engineering
> > > > > http://free-electrons.com
> > > >
> > > > Hi Maxime,
> > > >
> > > > If num-cs isn't present nothing prevent to start a transfer with a
> > > > non-valid CS pin, resulting in an error.
> > > > num-cs are default property especially made for this and a SPI driver
> > > > should try to get the property at probe/attach time.
> > >
> > > Yes, but as far as I know, our driver doesn't. I'm all in for having
> > > support for that in our driver, but without it, that patch is kind of
> > > useless.
> >
> > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD
> > uses it. So it is not useless for downstream user of DTS.
>
> Ah, I didn't know this was for FreeBSD. So you started to use our DTs,
> or do you have some modifications to it? How does that work?

Yes we use the DTS from linux from quite some times now. We're
currently synced with 4.7-ish.
We either use them directly or modify them according to our needs and
driver support.

> Anyway, the fact that it isn't used by our driver at the moment and
> that it's meant for other OSes should be mentionned in the commit log.

Yeah I understand, I'll send a v2 with this in the commit log.

> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com


--
Emmanuel Vadot <[email protected]> <[email protected]>

2016-12-03 23:11:07

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

Hi Emmanuel,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.9-rc7 next-20161202]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url: https://github.com/0day-ci/linux/commits/Emmanuel-Vadot/ARM-dts-sunxi-Add-num-cs-for-A20-spi-nodes/20161123-034323
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-vexpress_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/sun7i-a20.dtsi:874.13-14 syntax error
>> FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation


Attachments:
(No filename) (1.06 kB)
.config.gz (18.07 kB)
Download all attachments

2016-12-05 09:28:43

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Thu, Dec 01, 2016 at 11:24:14AM +0100, Emmanuel Vadot wrote:
> > > > > If num-cs isn't present nothing prevent to start a transfer
> > > > > with a non-valid CS pin, resulting in an error. num-cs are
> > > > > default property especially made for this and a SPI driver
> > > > > should try to get the property at probe/attach time.
> > > >
> > > > Yes, but as far as I know, our driver doesn't. I'm all in for
> > > > having support for that in our driver, but without it, that
> > > > patch is kind of useless.
> > >
> > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD
> > > uses it. So it is not useless for downstream user of DTS.
> >
> > Ah, I didn't know this was for FreeBSD. So you started to use our DTs,
> > or do you have some modifications to it? How does that work?
>
> Yes we use the DTS from linux from quite some times now. We're
> currently synced with 4.7-ish. We either use them directly or
> modify them according to our needs and driver support.

Do you have a link to those modifications?

Thanks,
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


Attachments:
(No filename) (1.13 kB)
signature.asc (801.00 B)
Download all attachments

2016-12-05 09:40:42

by Emmanuel Vadot

[permalink] [raw]
Subject: Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes

On Mon, 5 Dec 2016 10:28:21 +0100
Maxime Ripard <[email protected]> wrote:

> On Thu, Dec 01, 2016 at 11:24:14AM +0100, Emmanuel Vadot wrote:
> > > > > > If num-cs isn't present nothing prevent to start a transfer
> > > > > > with a non-valid CS pin, resulting in an error. num-cs are
> > > > > > default property especially made for this and a SPI driver
> > > > > > should try to get the property at probe/attach time.
> > > > >
> > > > > Yes, but as far as I know, our driver doesn't. I'm all in for
> > > > > having support for that in our driver, but without it, that
> > > > > patch is kind of useless.
> > > >
> > > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD
> > > > uses it. So it is not useless for downstream user of DTS.
> > >
> > > Ah, I didn't know this was for FreeBSD. So you started to use our DTs,
> > > or do you have some modifications to it? How does that work?
> >
> > Yes we use the DTS from linux from quite some times now. We're
> > currently synced with 4.7-ish. We either use them directly or
> > modify them according to our needs and driver support.
>
> Do you have a link to those modifications?
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

Sure,

https://svnweb.freebsd.org/base/head/sys/boot/fdt/dts/arm/

--
Emmanuel Vadot <[email protected]> <[email protected]>